search

chris1111 / Wireless-USB-OC-Big-Sur-Adapter

Drivers for Realtek 802.11n and 802.11ac USB Wi-Fi adapters. Packages for macOS Hackintosh PC or Laptop
https://chris1111.github.io/Wireless-USB-OC-Big-Sur-Adapter/
527 stars 47 forks source link

cannot boot after installing Wireless-USB-OC-Big-Sur-Adapter #7

Closed skandavc18 closed 4 years ago

skandavc18 commented 4 years ago

I have WN725N V3 adapter. Used to work in my Catalina Hackintosh. But after upgrading to Big Sur beta, it is not working.

When I use Wireless-USB-OC-Big-Sur-Adapter and add the 2 kexts to config.plist as in the video and restart, it does not boot at all.

When I use Wireless-USB-Big-Sur-Adapter, it says "NO USB Wifi Device Plugged in". Tried disabling SIP and re-enabling and then disabling again and installing. But not working.

Please help!

I have attached the log file for Wireless-USB-Big-Sur-Adapter pkg Installer Log 1-Oct-2020.txt

chris1111 commented 4 years ago

What Big Sur beta? Why using two program this is not good, you are mixed up two things Its hard to help here

skandavc18 commented 4 years ago

No. what I mean is that I first experimented with Wireless-USB-OC-Big-Sur-Adapter program. It didn't work. So I uninstalled it. Later I tried Wireless-USB-Big-Sur-Adapter program. Even that didn't work. I didn't mix both.

chris1111 commented 4 years ago

Wireless-USB-OC-Big-Sur-Adapter is support to easily work on your Hackintosh, if not check your OpenCore Setup

skandavc18 commented 4 years ago

ok.

skandavc18 commented 4 years ago

Got it Working! As you rightly said, the problem was with my OC configuration. I had left the secureBootModel option in Misc/Security in OC as default. It has to be set as disabled. This made it work.

Thanks for the driver. It's fantastic!

Also, your driver works perfectly with even TPLink WN725N V2 as well

chris1111 commented 4 years ago

Got it Working! As you rightly said, the problem was with my OC configuration. I had left the secureBootModel option in Misc/Security in OC as default. It has to be set as disabled. This made it work.

Thanks for the driver. It's fantastic!

Also, your driver works perfectly with even TPLink WN725N V2 as well

Glad to hear it but if you came back again with a failure that's what I was going to tell you because it could only be that Also it is better to use the kexts injection by OpenCore 😁 Thanks enjoy I will transfer issue