tobozo
commented
1 year ago closing this as incomplete, feel free to reopen if you have more info to provide
Thank you for opening an issue on an esp32OTA Arduino library repository. To improve the speed of resolution please review the following guidelines and common troubleshooting steps below before creating the issue:
-
Do not use GitHub issues for troubleshooting projects and issues. GitHub issues are meant for known defects in the code. If you don't know if there is a defect in the code then start with troubleshooting on the forum first.
-
If following a tutorial or guide be sure you didn't miss a step. Carefully check all of the steps and commands to run have been followed. Consult the forum if you're unsure or have questions about steps in a guide/tutorial.
-
For Arduino projects check these very common issues to ensure they don't apply:
-
For uploading sketches or communicating with the board make sure you're using a USB data cable and not a USB charge-only cable. It is sometimes very hard to tell the difference between a data and charge cable! Try using the cable with other devices or swapping to another cable to confirm it is not the problem.
-
Be sure you are supplying adequate power to the board. Check the specs of your board and plug in an external power supply. In many cases just plugging a board into your computer is not enough to power it and other peripherals.
-
Double check all soldering joints and connections. Flakey connections cause many mysterious problems. See the guide to excellent soldering for examples of good solder joints.
-
If you're sure this issue is a defect in the code and checked the steps above please fill in the following fields to provide enough troubleshooting information. You may delete the guideline and text above to just leave the following details:
-
Arduino board: INSERT ARDUINO BOARD NAME/TYPE HERE
-
Arduino IDE version (found in Arduino -> About Arduino menu): INSERT ARDUINO VERSION HERE
-
List the steps to reproduce the problem below (if possible attach a sketch or copy the sketch code in too): LIST REPRO STEPS BELOW
Error integrating within platformio