christianhaitian / arkos

Another rockchip Operating System
MIT License
1.47k stars 83 forks source link

Half-Life cannot go up or down ladders #292

Closed vimstar closed 3 years ago

vimstar commented 3 years ago

I have played Half-Life up to the point where I need to climb up a ladder to continue and I am unable to. When you approach the ladder and try to climb it does nothing no matter what I try. I am playing on the RG 351P using the latest release of ArkOS 1.6 (03082021).

christianhaitian commented 3 years ago

Try the alternate control configuration described at the end of this section and see if that helps. https://github.com/christianhaitian/arkos/wiki/ArkOS-Emulators-and-Ports-information#half-life-1

christianhaitian commented 3 years ago

Hi,

Have you tried what I suggested already? Did it help?

Thanks,

vimstar commented 3 years ago

Sorry about the delayed reply. Yes, I did try the alternate control configuration and it didnt help. I am still unable to climb up or down ladders.

Rh0gii commented 3 years ago

I'm having the same issue. in a normal setting, would the "move forward" / "move backward" be used to climb "up" and "Down" respectively? that's not working in my case.

Rh0gii commented 3 years ago

I don't know if this is helpful, but FWIW, I found that when I do a fresh load up of Half-Life and load a saved game by a ladder, I can intermittently use the ladder, but after a few minutes (maybe 1 or 2) it will stop working and just make me "stick" to the ladder where all that I can do is just jump back away from holding the ladder.

Rh0gii commented 3 years ago

is this an intermittent issue that only some users have? Is the problem something that can be observed? Any ideas for how those of us affected can get this working?

brunns commented 3 years ago

I'm going to try setting HL up again from scratch, making a note of exactly what I did here. The problem might will be the result of some particular sequence of set up steps.

brunns commented 3 years ago

Can confirm that after following the instructions here, with or without installing the alternative control set, I can't climb the ladder in the Training Room.

For this test, I didn't invert the y-axis controls as per the retrogamecorps instructions - but I had done that the first time I installed HL, and I did have the stairs issue with that too.

I've upgraded to the latest ArkOS, and I'm using the valve data from the Steam version of Half-Life on a Mac. (I used the Mac for all the file copying and so forth, just in case that might be the issue.)

christianhaitian commented 3 years ago

As development for the RG351P has ended, I will not further investigate this issue. Perhaps krishenriksen may be able to further review and assist on this issue since he was the one who delivered this port. He also has a version available through AnberPorts. https://github.com/krishenriksen/AnberPorts