Contribution

[lhbueno]

How could I contribute to this library? I developed a block to work with Modelica Electrical MultiPhase library as you can see in the figure below. It has also reactive power control.

[christiankral]

You are very welcome to contribute. Please fork the library and make a pull request or just send me your model.

[lhbueno]

The idea of this improvement is to interface the PV system to the Power System library

[christiankral]

Manually incorporated your pull request in 92df23f. The following changes have additionally been performed:

In model MultiPhaseConverter

• Blocks.Rotation_dq is replaced by Modelica.Electrical.Machines.SpacePhasors.Blocks.Rotator
• Blocks.Park is replaced by Modelica.Electrical.Machines.SpacePhasors.Blocks.ToSpacePhasor toSpacePhasor and Modelica.Electrical.Machines.SpacePhasors.Blocks.Rotator
• fromSpacePhasor is not diectly connected to the signal current source; instead a smoothing first order delay is used; this enables two things:
  • The resistors parallel to the voltages sources in PhotoVoltaics.Examples.SimpleModuleMultiPhase is not required any more
  • An ideal inductor between converter and voltage source does not cause the simulation model to fail

The following models are removed due to redundancy reasons

• Components.Blocks.MIMO
• Components.Blocks.Park
• Components.Blocks.Rotation_dq
• Components.Blocks.Icons

[christiankral]

See #11

[christiankral]

Model ist re-structured and updated according to #12