Closed elpimous closed 3 years ago
HI Vincent,
I’m not sure on Open Quadruped’s firmware but these guidelines might help you setup your real robot: https://github.com/chvmp/champ/wiki/Hardware-Integration.
What I would recommend is to write direct comms interface between your Teensy and Linux Machine.
On the Jetson, you need to specify the serial port as:
Hi. Champ simulations 👍
Now real-time. Working on Jetson, connected to Adham/Maurice/Mano board (open quadrupeder/spotmicroAI) , containing a teensy 4.0.
Teensy is rosserial ready (Maurice Rahme firmware /moribot)
Do I just need to run the next lines, to be able to use your package on my Dog?
Thanks a lot.
Vincent.