search

ciromattia / timerino

A programmable darkroom enlarger linear and geometric (f/stop) timer built upon an Arduino microcontroller
ISC License
23 stars 7 forks source link

Membrane keyboad not debounced #3

Open alanbradford opened 1 year ago

alanbradford commented 1 year ago

I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan

DanieleLucarelli commented 1 year ago

The Timerino was evolved and the github project is out of date.

If you send me your email address i send new code and hardware setup.

@.***

Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:

I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you are subscribed to this thread.Message ID: @.***>

alanbradford commented 1 year ago

Thanks! alan.bradford@bluewin.ch

alanbradford commented 1 year ago

@.***

Thanks!

Alan Bradford

On 26 Jan 2023, at 17:04, DanieleLucarelli @.***> wrote:

 The Timerino was evolved and the github project is out of date.

If you send me your email address i send new code and hardware setup.

@.***

Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:

I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

DanieleLucarelli commented 1 year ago

Mail address is not visible i wrote my in vertical l d a n i v v e r o @ g m a i l . c o m

Il giorno gio 26 gen 2023 alle ore 17:50 alanbradford < @.***> ha scritto:

@.***

Thanks!

Alan Bradford

On 26 Jan 2023, at 17:04, DanieleLucarelli @.***> wrote:

 The Timerino was evolved and the github project is out of date.

If you send me your email address i send new code and hardware setup.

@.***

Il giorno gio 26 gen 2023 alle ore 16:32 alanbradford < @.***> ha scritto:

I have this setup and the hardware all seems to work but I cannot enter single digit times - Whenever i touch a key I get 11.1 or 33.3 or 66.6 etc. I read some bits about debouncing keys to allow a 250ms delay but I am not skliled enough to implement this. I am a novice to this but see in your code there is a "TODO: add event listener for keypad" Is this what is required or is there another later .ino which fixes this. Many thanks. Alan

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABJ557HKSFXDPH5ARDUEG5DWUKKIXANCNFSM6AAAAAAUHUKZQ4

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405299245, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557BLNGGGQ2IXDHA6YQLWUKTMTANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>

DanieleLucarelli commented 1 year ago

Hi, i saw that Timerino is evolved to ver. 3.01 with the work of Alessio Bortoletto.

Here: https://alessiobortoletto.wixsite.com/alessiobortoletto/projects-2 you find everything.

Il giorno gio 26 gen 2023 alle ore 17:34 alanbradford < @.***> ha scritto:

Thanks! @.***

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405276873, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557FA3P72JDW3D4TZMMDWUKRP3ANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>

alanbradford commented 1 year ago

Thanks you very much!

Alan Bradford @.***

On 27 Jan 2023, at 10:29, DanieleLucarelli @.***> wrote:

Hi, i saw that Timerino is evolved to ver. 3.01 with the work of Alessio Bortoletto.

Here: https://alessiobortoletto.wixsite.com/alessiobortoletto/projects-2 you find everything.

Il giorno gio 26 gen 2023 alle ore 17:34 alanbradford < @.***> ha scritto:

Thanks! @.***

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1405276873, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABJ557FA3P72JDW3D4TZMMDWUKRP3ANCNFSM6AAAAAAUHUKZQ4 . You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/ciromattia/timerino/issues/3#issuecomment-1406243036, or unsubscribe https://github.com/notifications/unsubscribe-auth/A5PMZBJYO5CAWBWBRGOWHXDWUOIO3ANCNFSM6AAAAAAUHUKZQ4. You are receiving this because you authored the thread.