cjj25 / Yi-RTS3903N-RTSPServer

A RTSPServer for RTS3903N based IP Cameras (Yi Camera Inspired)
67 stars 13 forks source link

Goowls 1080P IP Camera supported! #21

Closed iMilnb closed 2 years ago

iMilnb commented 2 years ago

Just pointing out that this camera https://www.newegg.com/p/2P0-02K4-00008 has exactly the same firmware as the Cacagoo XY-R9420-X2 (7.1.00.25A_202002271051) and thus the archive works out of the box. Firmware backup is here: https://imil.net/stuff/goowls_dump.tgz

cjj25 commented 2 years ago

Thanks for the update and firmware :-) Similar devices here: https://github.com/cjj25/Yi-RTS3903N-RTSPServer/issues/5#issuecomment-903747367

Timmy-Harris commented 2 years ago

@iMilnb Hello! Could you please share firmware backup? 'cause this link https://imil.net/stuff/goowls_dump.tgz does not work :( Is there any way to update a very similar camera based on MVT9632-SC2303_V1.0 with your backup? Thank you in advance.

cjj25 commented 2 years ago

Hi @Timmy-Harris, I have a camera with the same board in my research box.

What's the original firmware running on your device (which vendor), we can completely flash the device with a new firmware from a root shell but we some planning needs to be considered.

Any problems with flashing will brick the device and will require the SOIC8 flash chip to be de-soldered, flashed and then soldered back. That's why it's very important to take a firmware backup first before any attempts.

Timmy-Harris commented 2 years ago

The vendor is Sdeter A8. I'm using V380 application. photo_2022-07-05_15-55-31

cjj25 commented 2 years ago

When you use the payload from this repository on your SD card, does it do a firmware dump (create a backup folder on the root of the SD card)?

Timmy-Harris commented 2 years ago

Unfortunately, it does nothing. The device just started video recording and saved it into RecFiles folder.

cjj25 commented 2 years ago

I'd love to have a firmware dump to see if there is a payload we could create for other users.

Do you have access to UART?

UART information here.

cjj25 commented 2 years ago

https://github.com/TheCrypt0/yi-hack-v4/issues/154#issuecomment-903343524

Timmy-Harris commented 2 years ago

Yes, I have UART converter. I'll try to connect this board.

Timmy-Harris commented 2 years ago

I've got the same behavior as bondiblueos9 got. I wired up those pads but got nothing. I tried the tx and rx both ways. Checked two middle pins and those pins connected to the RTS3903N chip.

Ammarpic commented 2 years ago

Just pointing out that this camera https://www.newegg.com/p/2P0-02K4-00008 has exactly the same firmware as the Cacagoo XY-R9420-X2 (7.1.00.25A_202002271051) and thus the archive works out of the box. I have a problem with the camera I need the basic software Please help

Ammarpic commented 2 years ago

I have a problem with the camera I need the basic software Please help camera goowls