Closed SruiSan closed 1 year ago
Thanks, I saw some breaking changes in the new Switch Firmware some days ago when I updated the Firmware.
I will take a look into it.
hi, I had the same issue with the Netgear GS724T switch
Same problem here. Which Switch Firmware was still working? I'm running V2.06.14EN. I find firmware versions 2.00.x and 2.06.x
Works fine here with Firmware version 2.00.05. Unfortunately, I don't have a GS724T to check @SvenMartin81
hi, i cannot connect to my switch withhin this integration. There is a fault message. I should check my konfiguration....but the IP and the passwort is correct.
Could you recheck again? Did some work here https://github.com/ckarrie/ckw-ha-gs108e/issues/6#issuecomment-1374172577
hi, I tested with my GS724T but this appears....There is although a strange standard host defined (192.168.178.5)...which has nothing to do with my network. How can I change this?
I don't own a GS724T so I can't test it. This integration is tested with GS108E only. Yeah, 192.168.178.5 is the current default IP in this integration, I will remove that.
means, if i change this to my switch IP it could be possible to run? But how can I change this IP?
You can try this integration with your GS724T by re-adding your switch and entering your Switch IP/Password, but I'm quite unconfident that your GS724T will work.
Hi!
First of all, thanks for you job.
I try to use this scripts, but when I define the hosts in yaml file, and I restart the HA, it not start
I want to know if still works, or spend some time to debug if the issue is in my side
Thank you!