Not functioning with GS110EMX

ckarrie / ha-netgear-plus

HomeAssistant Netgear Switch Integration

Apache License 2.0

22 stars 10 forks source link

Not functioning with GS110EMX #48

Open Tiger770 opened 1 week ago

Tiger770 commented 1 week ago

System Health details

Unsure where this is.

Checklist

[X] I have enabled debug logging for my installation.
[X] I have filled out the issue template to the best of my ability.
[X] This issue only contains 1 issue (if you have multiple issues, open one issue for each issue).
[X] This issue is not a duplicate issue of any previous issues.

Describe the issue

Attempted to connect to two separate GS110EMX switches and got "Unknown error occurred"

I have tried this with the stock firmwares on the device - 1.0.1.7 - and then with upgraded current firmware 1.0.2.8. Neither firmware version was able to be connected and scraped by this addin.

Reproduction steps

Load Repo
Install Integration
Configure connection

Debug logs

Will collect and report back

Diagnostics dump

N/A

foxey commented 1 week ago

Hi @Tiger770, your switch is not supported (yet). Can you share the source of the login page and the exact URL of the screenshot above and of the page with 'Port Status' (see side menu in the screenshot)?

Tiger770 commented 1 week ago

@foxey -

The Exact URL is http://192.168.1.11/wmi/login

The URL for the Monitoring Port statistics is http://192.168.1.11/homepage.html, but it may be embedded in a table in a frame. Here's the source for it: Monitoring stats source.pdf

Tiger770 commented 1 week ago

It dawned on me you may want the port status page, not the port statistics one. So here's the port status page and source:

Port Status Source.pdf

foxey commented 1 week ago

@Tiger770 I can't copy the source from your PDF files (looks like the print converted them into graphics). Could you just upload the HTML sources? (Github does not allow HTML attachments, but if you change the filetype to .txt it works).

Tiger770 commented 6 days ago

Try these. Also, I realized if I hovered over the links in the frame on the left I could pull the full URL to the Status and Statistics page. This is them:

Port Statistics Frame Source.txt

Port Status Frame Source.txt

Port Status Page http://192.168.1.11/iss/specific/port_settings.html?Gambit=qkkfnehlsmgmehiiilbhkfjahloicifimmjm

Port Statistics Page http://192.168.1.11/iss/specific/interface_stats.html?Gambit=qkkfnehlsmgmehiiilbhkfjahloicifimmjm