search

classicrocker883 / MRiscoCProUI

This is optimized firmware for Voxelab Aquila & Ender3 V2/S1 3D printers.
https://classicrocker883.github.io/
Other
74 stars 17 forks source link

Starting.....please wait [BUG] #135

Closed Oldskool81 closed 2 months ago

Oldskool81 commented 2 months ago

Did you test the latest release build?

Yes, and the problem still exists.

Bug Description

Installed latest firmware and Voxi red DWIN. Aquila_GD32_MM-ProUI-EX-MPC-05-13 screen is stuck on Starting......Please wait. will not boot.

Printer Model

Voxelab Aquila

Model Type

Aquila

Your Mainboard

Aquila GD32

Other Mainboard Type

No response

Add-ons that could be involved

No response

ProUI?

ProUI

Bed Leveling

MM - Manual Mesh Bed Leveling

Did you include your own configuration files?

Additional information & file uploads

No response

classicrocker883 commented 2 months ago

im pretty sure I know exactly what the cause of this issue is. I will post a new release soon. thanks for pointing this out

classicrocker883 commented 2 months ago

Aquila_GD32_MM-ProUI-EX-MPC.zip

I made a quick firmware file you can try flashing and see if that works

Oldskool81 commented 2 months ago

That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!

From: Andrew @.> Sent: Thursday, May 16, 2024 7:33 AM To: classicrocker883/MRiscoCProUI @.> Cc: Oldskool81 @.>; Author @.> Subject: Re: [classicrocker883/MRiscoCProUI] Starting.....please wait [BUG] (Issue #135)

Aquila_GD32_MM-ProUI-EX-MPC.ziphttps://github.com/classicrocker883/MRiscoCProUI/files/15334424/Aquila_GD32_MM-ProUI-EX-MPC.zip

I made a quick firmware file you can try flashing and see if that works

— Reply to this email directly, view it on GitHubhttps://github.com/classicrocker883/MRiscoCProUI/issues/135#issuecomment-2114984003, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BBXH7ZNMVH5ZVEW22U4AQIDZCSKRZAVCNFSM6AAAAABHVDVO66VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJUHE4DIMBQGM. You are receiving this because you authored the thread.Message ID: @.***>

classicrocker883 commented 2 months ago

That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!

I had updated the settings.cpp file so that it saved memory so more features could be added to some versions. I tested the firmware using a probe so I figured it should be all good. some variables act as place holders in the EEPROM, I just reverted a couple changes I made.

Marlin just updated with a few more file changes, like this ⚡️ Fix motion smoothness
So, I'll be uploading a revised release, lookout for that soon.