Cannot change micro-sd card when using an SD card adapter without rebooting the printer

[vw72]

Describe the bug If one is using a micro-sd to standard sd card adapter the printer doesn't recognize that the card has been changed (or if no card is in the printer when powered on, it doesn't recognize that a card has been added). One must reboot the printer to see the new card contents.

To Reproduce Steps to reproduce the behavior:

1. Put SD card containing the micro-sd card in the external SD card reader
2. Power on the printer
3. Eject the SD card and replace with another
4. Printer doesn't recognize the change and still displays the old directory

Expected behavior When replacing the SD card, it should update the directory listing

Screenshots If applicable, add screenshots to help explain your problem.

Version (please complete the following information): May release

Additional context You fixed this for me with a separate build of a beta release (on reddit), but the latest release does not have the fix.

[classicrocker883]

I uploaded a new pre-release here

fixed since addressed in this issue

if you'd like to try that out since the new Mriscoc update it has addressed this issue. Also, the SD card extender can be enabled in Advanced settings under the Control Menu. before it used to be only enabled when compiling firmware, now it can be turned on or off anytime.

reply back if you have success or need further assistance.

[vw72]

On both GD32_BLT-ProUI and GD32_UBL-ProUI, This is working now and I have the menu option you mentioned.

On Wed, Jun 7, 2023 at 8:33 PM Andrew @.***> wrote:

I uploaded a new pre-release here https://github.com/classicrocker883/MriscocProUI/releases/tag/2.1.3c-test2

if you'd like to try that out since the new Mriscoc update it has addressed this issue. Also, the SD card extender can be enabled in Advanced settings under the Control Menu. before it used to be only enabled when compiling firmware, now it can be turned on or off anytime.

reply back if you have success or need further assitance.

— Reply to this email directly, view it on GitHub https://github.com/classicrocker883/MriscocProUI/issues/42#issuecomment-1581756339, or unsubscribe https://github.com/notifications/unsubscribe-auth/BAKGTRAFD5ECCDBDYXIMPVDXKETVPANCNFSM6AAAAAAY2GPHWU . You are receiving this because you authored the thread.Message ID: @.***>

[github-actions[bot]]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.