Closed Claresh07 closed 6 months ago
this shouldn't happen, even with Alex's. I think the issue is the Slicer.
there may be something how you sliced, or with the slicer program, or even the SD card.
I would try using a known good slicer, with a known good model to print, and a known good SD.
it could also be your Start Gcode.
Hey, thanks for getting back to me. I started having the problem with the stock firmware too, I did a full format of the sd card, and it was working again. In summary, it was probably a faulty sd card (and your firmware is more sensitive than the voxelab)
This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.
Did you test the latest release build?
Yes, and the problem still exists.
Bug Description
Not sure if it's a firmware problem or not. When I stat a print the bed and hotend heat, moves to home then print goes to 100% and cool down starts. I also tried alex's firmware to same result.
Printer Model
Voxelab Aquila
Model Type
S3
Your Mainboard
Aquila N32
Other Mainboard Type
No response
Add-ons that could be involved
No response
ProUI?
ProUI
Bed Leveling
BLT - BL Touch Bilinear mesh
Did you include your own configuration files?
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
No response