search

claudiospizzi / node-red-contrib-intexspa

Intex SPA nodes for Node-RED.
MIT License
4 stars 0 forks source link

NodeRed #2

Open Malvin76 opened 2 years ago

Malvin76 commented 2 years ago

Hi Claudio, I had the problem, That i cannot install it. I have Running a rassbery pi3 and i Use the nodered to control my Swimmingpool. But i can‘t install it. What can i do?

Cheers peter

claudiospizzi commented 2 years ago

Hi Peter

I'm sorry to hear that. This module was built for an Intex SPA Hot Tub Whirlpool not a Swimming Pool.

Can you specify additional details about your error/issue:

Regards, Claudio

Malvin76 commented 2 years ago

Hi Claudio,

I know. I have this Whirlpool. I wanted to say That I Control my existing swimmingpool with a rasberry and Node-red. This Is working Fine. Now I want to implement the control stuff of this Wlan Intex Whirlpool in my Pool Dashboard. Yesterday i had some trouble to install your nodes but i fixed it today. There was a trouble with my PI. Now i implemented your node. The whirlpool Is working Fine via the Iphone Intex App. I filled out the config stuff of your Node. I started it, but i received always a failed Status 404 or 400. What can I do. Thanks in advance. Cheers Peter

Malvin76 commented 2 years ago

Hi Peter

I'm sorry to hear that. This module was built for an Intex SPA Hot Tub Whirlpool not a Swimming Pool.

Can you specify additional details about your error/issue:

  • Pool Type / Version: Intex pure Spa octagon wlan 28458

  • What happend and how can we reproduce it? Error Code 404 or 400 When i inject the command for the Status or command

  • What error did you get? Error: Request failed with status code 404

  • Environment setup:

    • Module version your latest Version 2.1
    • Node-RED version Node-RED v2.2.2

Regards,

Claudio

Malvin76 commented 2 years ago

Any Update?

Gruß Peter

claudiospizzi commented 2 years ago

Hi Peter

I've tried to reproduce your issue. Error 400 or 404 are returned by the Intex API - so something was malformed or not found. A misspelled device name will result in the error "Device with device name not found." - not your error, right? But a wrong username and/or password will result in an error "Request failed with status code 400". Can you double check your username and password?

I addition, have you enabled "Control from any network" for the device in the Intex SPA?

Regards, Claudio

Malvin76 commented 2 years ago

Hi Claudio,

Thank you. I checked everything. Username/password is the the same what I use for the intex app. I re-enter both serveral times but the error is still the same. The „control from any network „ is enabled! I have no idea what I can do.

Cheers Peter

Von meinem iPhone gesendet

Am 14.05.2022 um 09:40 schrieb Claudio Spizzi @.***>:

 Hi Peter

I've tried to reproduce your issue. Error 400 or 404 are returned by the Intex API - so something was malformed or not found. A misspelled device name will result in the error "Device with device name not found." - not your error, right? But a wrong username and/or password will result in an error "Request failed with status code 400". Can you double check your username and password?

I addition, have you enabled "Control from any network" for the device in the Intex SPA?

Regards, Claudio

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

Malvin76 commented 2 years ago

Hi Claudio,

I found the issue. In the "intex Status" if I select the refresh it will not work. Without the refresh it is working. The status stuff is working fine, but now the action stuff is not working.. SOrry to bother you, but what did I do wrong? [image: image.png] [{"id":"55e64341aad9b9d5","type":"tab","label":"Flow 1","disabled":false,"info":"","env":[]},{"id":"c75d224efd9d4356","type":"inject","z":"55e64341aad9b9d5","name":"","props":[{"p":"payload"}],"repeat":"","crontab":"","once":false,"onceDelay":0.1,"topic":"","payload":"true","payloadType":"bool","x":150,"y":80,"wires":[["240de1cb78fa3a02"]]},{"id":"240de1cb78fa3a02","type":"intexspa-action","z":"55e64341aad9b9d5","name":"Pool2","device":"7003d88acffbd366","component":"Heater On/Off","x":290,"y":80,"wires":[[]]},{"id":"7003d88acffbd366","type":"intexspa-config","name":"Pool2","username":" @.***","password":"XXXXX","device":"Pool2"}]

I try to start the heater.... but it fails always.. The configuration is the same from the status node which is working fine!! Thanks.

Regards, Peter

Am Sa., 14. Mai 2022 um 09:40 Uhr schrieb Claudio Spizzi < @.***>:

Hi Peter

I've tried to reproduce your issue. Error 400 or 404 are returned by the Intex API - so something was malformed or not found. A misspelled device name will result in the error "Device with device name not found." - not your error, right? But a wrong username and/or password will result in an error "Request failed with status code 400". Can you double check your username and password?

I addition, have you enabled "Control from any network" for the device in the Intex SPA?

Regards, Claudio

— Reply to this email directly, view it on GitHub https://github.com/claudiospizzi/node-red-contrib-intexspa/issues/2#issuecomment-1126664169, or unsubscribe https://github.com/notifications/unsubscribe-auth/AY6AKCTZFCSKO5OL3RAMJ73VJ5KFHANCNFSM5UTWBAQQ . You are receiving this because you authored the thread.Message ID: @.***>