Open FrankNL1984 opened 5 years ago
@thac0 This seems a bit odd to me. Any ideas why the kernel wouldn't load the initrd?
@FrankNL1984 Could tell me what the shasum of the EFI\org.clearlinux\freestanding-00-intel-ucode.cpio file is?
Using patched Intel DH67BL Intel Desktop board along with an Intel i7 2600K CPU.
This is weird, I do not know if this is happened due to an old EFI specification, on my laptop it boots well with 3 initrd.
Can you verify the hash from the cpio file.
$ sudo sha256sum /boot/EFI/org.clearlinux/freestanding-00-intel-ucode.cpio /usr/lib/initrd.d/00-intel-ucode.cpio bb8f0512802b82fd3249c28be4a0e1b74f401541cd94e67d918da946fb00ac5f /boot/EFI/org.clearlinux/freestanding-00-intel-ucode.cpio bb8f0512802b82fd3249c28be4a0e1b74f401541cd94e67d918da946fb00ac5f /usr/lib/initrd.d/00-intel-ucode.cpio
Hi there,
Thanks again for taking this seriously.
The shasum: 3b6ca55d2691f4b312961be26b46770a4f6622c7 (BOOT_PARTITION/EFI/org.clearlinux/) freestanding-00-intel-ucode.cpio
Kind regards
From: William Douglas notifications@github.com Sent: Wednesday, July 3, 2019 11:18 PM To: clearlinux/distribution distribution@noreply.github.com Cc: Voorde ter, Frank f.ter.voorde@tervoorde.net; Mention mention@noreply.github.com Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
@thac0https://github.com/thac0 This seems a bit odd to me. Any ideas why the kernel wouldn't load the initrd?
@FrankNL1984https://github.com/FrankNL1984 Could tell me what the shasum of the EFI\org.clearlinux\freestanding-00-intel-ucode.cpio file is?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGVDV76QNK5RXYDDAYLP5UJOZA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZFWPLI#issuecomment-508258221, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGU2EYXUGEYLOR7XAXTP5UJOZANCNFSM4H5JFQVA.
The shasum: 3b6ca55d2691f4b312961be26b46770a4f6622c7 (BOOT_PARTITION/EFI/org.clearlinux/) freestanding-00-intel-ucode.cpio
$ shasum /usr/lib/initrd.d/00-intel-ucode.cpio 3b6ca55d2691f4b312961be26b46770a4f6622c7 /usr/lib/initrd.d/00-intel-ucode.cpio
Not a corrupted file.
This is really ugly and I am noticing that we don't have a nice way to mask those initrd files currently. I can at least start working on a way so you can update without having problems booting after while we try and figure out what is going on with loading the initrd.
To be complete, I would like to inform both files have the same hash.
BOOT_PARTITION/EFI/org.clearlinux/ 3b6ca55d2691f4b312961be26b46770a4f6622c7 freestanding-00-intel-ucode.cpio
ROOT_PARTITION/usr/lib/initrd.d/ 3b6ca55d2691f4b312961be26b46770a4f6622c7 00-intel-ucode.cpio
From: Miguel Bernal Marin notifications@github.com Sent: Wednesday, July 3, 2019 11:30 PM To: clearlinux/distribution distribution@noreply.github.com Cc: Voorde ter, Frank f.ter.voorde@tervoorde.net; Mention mention@noreply.github.com Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
The shasum: 3b6ca55d2691f4b312961be26b46770a4f6622c7 (BOOT_PARTITION/EFI/org.clearlinux/) freestanding-00-intel-ucode.cpio
$ shasum /usr/lib/initrd.d/00-intel-ucode.cpio 3b6ca55d2691f4b312961be26b46770a4f6622c7 /usr/lib/initrd.d/00-intel-ucode.cpio
Not a corrupted file.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGWZZYR3JUVEO4PDKMLP5UK7HA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZFXLYQ#issuecomment-508261858, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGUL37QR2OSFV76JWZLP5UK7HANCNFSM4H5JFQVA.
@bryteise also we need an stateless for initrd as you do with the firmware (/etc/firmware
)
@miguelinux We do have stateless for some initrd files via /etc/kernel/initrd-* but not for the freestanding so I need to add that to clr-boot-manager.
Hi there,
That is very nice, but I'm fine just disabling autoupdate and kindly awaiting the progress on this issue.
If I can help you with something (providing information or trying things on bare metal), I would love to.
FIY: the error text appears in the font of the motherboard's POST screen. The the system hangs and doesn't even respond to the power switch, num lock lights or CTRL-ALT-DEL.
Kind regards from The Netherlands
From: William Douglas notifications@github.com Sent: Wednesday, July 3, 2019 11:32 PM To: clearlinux/distribution distribution@noreply.github.com Cc: Voorde ter, Frank f.ter.voorde@tervoorde.net; Mention mention@noreply.github.com Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
This is really ugly and I am noticing that we don't have a nice way to mask those initrd files currently. I can at least start working on a way so you can update without having problems booting after while we try and figure out what is going on with loading the initrd.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGQQ3L4GKCREO7XWSFDP5ULGRA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZFXQRA#issuecomment-508262468, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGSK3M4N6LXYDGF75Y3P5ULGRANCNFSM4H5JFQVA.
So here's the kernel code where the error message is being seen: https://github.com/torvalds/linux/blob/e93c9c99a629c61837d5a7fc2120cd2b6c70dbdd/arch/x86/boot/compressed/eboot.c#L469
I've not spent much time in this corner of the kernel, but from the code snippet, the kernel will attempt, through low-level EFI calls, to instantiate the ramdisk. If it fails, it will attempt to do it again, but load it at a different (higher) target address. For this case, EFI appears to be reporting failure for both attempts. The code is venerable (more than 5 years old) at this point, and well-exercised by other Linux distributions, so my hypothesis is that @FrankNL1984 's problem may be local to his platform.
@FrankNL1984 - Have the BIOS settings for your platform been changed from their factory defaults? If so, what changes were made?
Hi there,
My BIOS is patched with the latest upgrade and is in factory default.
Met vriendelijke groet,Frank ter Voorde
From: Joe Konno notifications@github.com Sent: Monday, July 8, 2019 5:57:29 PM To: clearlinux/distribution Cc: Voorde ter, Frank; Mention Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
So here's the kernel code where the error message is being seen: https://github.com/torvalds/linux/blob/e93c9c99a629c61837d5a7fc2120cd2b6c70dbdd/arch/x86/boot/compressed/eboot.c#L469
I've not spent much time in this corner of the kernel, but from the code snippet, the kernel will attempt, through low-level EFI calls, to instantiate the ramdisk. If it fails, it will attempt to do it again, but load it at a different (higher) target address. For this case, EFI appears to be reporting failure for both attempts. The code is venerable (more than 5 years old) at this point, and well-exercised by other Linux distributions, so my hypothesis is that @FrankNL1984https://github.com/FrankNL1984 's problem may be local to his platform.
@FrankNL1984https://github.com/FrankNL1984 - Have the BIOS settings for your platform been changed from their factory defaults? If so, what changes were made?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGVWVWXUTJIH4F2G24LP6NPWTA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZNRIFI#issuecomment-509285397, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGSQNJSLF6EZXZ3QRGTP6NPWTANCNFSM4H5JFQVA.
@FrankNL1984 - Another question-- your responses are very helpful, by the way!
When you omit the initrd=
argument from your command line, and successfully boot the platform, do you see any dmesg output about microcode failing to (re)load? Here's a one-liner for you:
$ sudo dmesg | grep -i microcode
I ask because the clr_power binary, executed shortly after rootfs is mounted, triggers a microcode reload event. In that flow, microcode is loaded directly from the rootfs, not through an initrd/ramdisk.
Thanks so much for your help here. It's appreciated!
Hi there,
Thanks for the compliments. I will keep helping.
You wrote: "When you omit the initrd= argument from your command line (...)" I would like to respond to that by saying that I have no choice but to do that. If I don't omit that, the system will not boot.
root@lavendel/home/operator # dmesg | grep -i microcode [ 0.199441] calling save_microcode_in_initrd+0x0/0x54 @ 1 [ 0.199441] initcall save_microcode_in_initrd+0x0/0x54 returned 0 after 0 usecs [ 0.317568] calling microcode_init+0x0/0x1f7 @ 1 [ 0.317604] microcode: sig=0x206a7, pf=0x2, revision=0x2e [ 0.317744] microcode: Microcode Update Driver: v2.2. [ 0.317745] initcall microcode_init+0x0/0x1f7 returned 0 after 172 usecs [ 10.879239] microcode: updated to revision 0x2f, date = 2019-02-17 [ 10.880939] x86/CPU: CPU features have changed after loading microcode, but might not take effect. [ 10.880943] microcode: Reload completed, microcode revision: 0x2f
Kind regards,
Frank ter Voorde
From: Joe Konno notifications@github.com Sent: Monday, July 8, 2019 9:57 PM To: clearlinux/distribution distribution@noreply.github.com Cc: Voorde ter, Frank f.ter.voorde@tervoorde.net; Mention mention@noreply.github.com Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
@FrankNL1984https://github.com/FrankNL1984 - Another question-- your responses are very helpful, by the way!
When you omit the initrd= argument from your command line, and successfully boot the platform, do you see any dmesg output about microcode failing to (re)load? Here's a one-liner for you:
I ask because the clr_powerhttps://github.com/clearlinux/clr-power-tweaks/blob/51b1224cac34dc300b25fe6613d4480866acef21/clr-power-tweaks.conf#L93 binary, executed shortly after rootfs is mounted, triggers a microcode reload event. In that flow, microcode is loaded directly from the rootfs, not through an initrd/ramdisk.
Thanks so much for your help here. It's appreciated!
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGWHY535SCQKQKUWWGTP6OLZNA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODZOFUWY#issuecomment-509368923, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGTBSQ3J22LRVXTOI4TP6OLZNANCNFSM4H5JFQVA.
All right. So, microcode can be patched, just not in the e(arly)boot path. Next step is to rule out Clear-specific optimizations to the kernel. So, @FrankNL1984 , if you could install the following and attempt to boot mainline-vanilla with and without the ucode initrd=
bootloader option:
$ sudo swupd bundle-add kernel-mainline-vanilla
I do not have your platform or I would do this myself, hence all of these requests.
It's worth re-iterating that your current work-around-- removing the ucode initrd from your kernel cmdline-- is the best path forward until we find a proper solution.
@thac0 I think that the kernel-mainline-vanilla bundle should be sufficient for checking if it is our kernel patches (it uses this package).
Ah. Thanks @bryteise . I'll update my earlier comment.
Hi there,
I've encountered a similar problem like this one. As requested by Douglas William, I hereby posted my findings below.
Problem occurs when clr-installer finished successfully, and then reboot to the system failed. The error messages : "Failed to open file: EFI\org.clearlinux\freestanding-00-intel-ucode.cpio Trying to load files to higer address Failed to open file: EFI\org.clearlinux\freestanding-00-intel-ucode.cpio"
Then I boot to the installer ISO, mounted root partition to /mnt and boot partition to /mnt/boot (“mount /dev/sda3 /mnt” and “mount /dev/sda1 /mnt/boot”), then issued command 'CBM_DEBUG=1 clr-boot-manager update --path=/mnt'. Please check the contents.log attached. I also listed the contents under root and boot partition, please kindly check the attached log. contents.log
Server Info: A) BIOS Information Vendor: Intel Corp. Version: SE5C600.86B.02.06.0006.032420170950 Release Date: 03/24/2017 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 8192 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) ACPI is supported USB legacy is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 4.6
B) Base Board Information Manufacturer: Intel Corporation Product Name: S2600JF Version: G28033-507 Serial Number: QSJP23201401 Asset Tag: .................... Features: Board is a hosting board Board is replaceable Location In Chassis: 00 Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0
C) CPU Information Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 46 bits physical, 48 bits virtual CPU(s): 32 On-line CPU(s) list: 0-31 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel CPU family: 6 Model: 45 Model name: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz Stepping: 7 CPU MHz: 2892.865 CPU max MHz: 3800.0000 CPU min MHz: 1200.0000 BogoMIPS: 5785.67 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 20480K NUMA node0 CPU(s): 0-7,16-23 NUMA node1 CPU(s): 8-15,24-31 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts md_clear flush_l1d
Hope this could lead to something.
Best Regards Xiaowei
Thanks @FURIOUS-7 . At first blush, looks like the same issue. Would you mind following the steps I put down earlier?
All right. So, microcode can be patched, just not in the e(arly)boot path. Next step is to rule out Clear-specific optimizations to the kernel. So, if you could install the following and attempt to boot mainline-vanilla with and without the ucode
initrd=
bootloader option:$ sudo swupd bundle-add kernel-mainline-vanilla
Well... we're stuck without feedback from the reporters. I do not have a platform that can reproduce this issue, so I've no way to move this forward.
I am currently on holiday and will get back within a couple of days.
Met vriendelijke groet,Frank ter Voorde
From: Joe Konno notifications@github.com Sent: Monday, July 22, 2019 5:15:37 PM To: clearlinux/distribution distribution@noreply.github.com Cc: Voorde ter, Frank f.ter.voorde@tervoorde.net; Mention mention@noreply.github.com Subject: Re: [clearlinux/distribution] CRITICAL Wrong entry in loader.conf prevents booting (#976)
Well... we're stuck without feedback from the reporters. I do not have a platform that can reproduce this issue, so I've no way to move this forward.
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/clearlinux/distribution/issues/976?email_source=notifications&email_token=AMQTWGSIYNPTOCLRFWEWPS3QAXFJTA5CNFSM4H5JFQVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2QIEFA#issuecomment-513835540, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMQTWGTC2ZTOGMMAG3VKSKDQAXFJTANCNFSM4H5JFQVA.
I am having this same issue after a fresh install from USB. The USB itself boots fine, but after the install finishes I get the issue with the ucode initrd=
thing.
I installed the kernel-mainline-vanilla
package and attempted to boot it with and without the ucode initrd, but the same issue is present. Both linux-lts2018-4.19.60-63
and linux-mainline-5.2.1-4
fail to boot with the ucode initrd line, but both boot fine with the line removed.
When I boot the mainline vanilla kernel without the ucode initrd, I get this:
root@clearlinuxbox~ # dmesg | grep -i microcode
[ 0.248158] calling save_microcode_in_initrd+0x0/0x4d @ 1
[ 0.248162] initcall save_microcode_in_initrd+0x0/0x4d returned 0 after 0 usecs
[ 0.974948] calling microcode_init+0x0/0x20e @ 1
[ 0.974972] microcode: sig=0x206a7, pf=0x10, revision=0x23
[ 0.975006] microcode: Microcode Update Driver: v2.2.
[ 0.975008] initcall microcode_init+0x0/0x20e returned 0 after 57 usecs
[ 22.159616] microcode: updated to revision 0x2f, date = 2019-02-17
[ 22.160178] core: PEBS enabled due to microcode update
[ 22.160186] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[ 22.160188] microcode: Reload completed, microcode revision: 0x2f
...and when I boot the LTS kernel I get this:
root@clearlinuxbox~ # dmesg | grep -i microcode
[ 0.159719] calling save_microcode_in_initrd+0x0/0x54 @ 1
[ 0.159723] initcall save_microcode_in_initrd+0x0/0x54 returned 0 after 0 usecs
[ 1.098373] calling microcode_init+0x0/0x217 @ 1
[ 1.098399] microcode: sig=0x206a7, pf=0x10, revision=0x23
[ 1.098431] microcode: Microcode Update Driver: v2.2.
[ 1.098433] initcall microcode_init+0x0/0x217 returned 0 after 56 usecs
[ 22.154758] microcode: updated to revision 0x2f, date = 2019-02-17
[ 22.155394] core: PEBS enabled due to microcode update
[ 22.155407] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
Sorry to just jump into the convo, but I was hoping I could help.
@logavanc Thanks for the info. Is it possible to share your hardware configuration, as @FURIOUS-7 and @FrankNL1984 have done?
@thac0 I am using a Dell Latitude E6420 with BIOS version A08 (in the process of trying to upgrade the BIOS to A25 to see if it helps).
root@clearlinuxbox~ # lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 36 bits physical, 48 bits virtual
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Model name: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
Stepping: 7
CPU MHz: 1293.530
CPU max MHz: 3200.0000
CPU min MHz: 800.0000
BogoMIPS: 4988.55
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 3072K
NUMA node0 CPU(s): 0-3
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
root@clearlinuxbox~ # dmidecode -t 2
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0K0DNP
Version: A02
Serial Number: /G8WGFS1/CN129611CP0992/
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Specified
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
root@clearlinuxbox~ # dmidecode -t 0
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A08
Release Date: 10/18/2011
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
BIOS boot specification is supported
Targeted content distribution is supported
BIOS Revision: 4.6
Hope this is the right info!
Very helpful. Thanks @logavanc !
@thac0 the BIOS update from A08 to A25 (Dell did not make that easy...) did not help. Let me know if there is anything else that I can do to help.
@logavanc, @FURIOUS-7, @FrankNL1984
What is the output of $ cat /sys/firmware/efi/efivars/LoaderFirmwareType*
@miguelinux yeah, this is what I get (grabbed all LoaderFirmware* vars for fun and added a few missing newlines):
root@clearlinuxbox~ # cat /sys/firmware/efi/efivars/LoaderFirmware*
American Megatrends 4.632
UEFI 2.00
Looks like this issue is expected ;-(
From https://github.com/torvalds/linux/commit/47226ad4f4cfd1e91ded7f2ec42f83ff1c624663 commit body:
the freeze appears to be a firmware bug when reading file data into buffers above 4GB
and
Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013 which may possibly be related, commit https://github.com/tianocore/edk2/commit/4e39b75e ("MdeModulePkg/DiskIoDxe: fix source/destination pointer of overrun transfer").
Unfortunately kernel + ucode.cpio
is bigger than initrd_addr_max.
@thac0 @bryteise thought?
@miguelinux - Time to test that theory by building a (much) smaller kernel, such that sizeof(kernel) + sizeof(ucode.cpio) < initrd_addr_max
, for UEFI 2.00. We could call on Logan (if willing) to see if that fixes the problem.
Hello, I am running into the same error after a fresh install (erasing SDD) from a USB drive. Is there a quick fix that you would recommend?
Thanks,
@DrGo - The standing work-around is to remove the initrd=\EFI\org.clearlinux\freestanding-00-intel-ucode.cpio
argument from the bootloader.
Thanks, I did and it works fine now. Also disabled autoupdates. I am using 5.2.4-810 and clr-installer-gui: 2.1.0, built on 2019-07-18_23:10:57_UTC
@DrGo If you have a moment, could you share your platform particulars? Like in https://github.com/clearlinux/distribution/issues/976#issuecomment-515101158 ?
Sure!
~ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 46 bits physical, 48 bits virtual
CPU(s): 32
On-line CPU(s) list: 0-31
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
NUMA node(s): 2
Vendor ID: GenuineIntel
CPU family: 6
Model: 45
Model name: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
Stepping: 7
CPU MHz: 3591.545
CPU max MHz: 3800.0000
CPU min MHz: 1200.0000
BogoMIPS: 5786.19
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 20480K
NUMA node0 CPU(s): 0-7,16-23
NUMA node1 CPU(s): 8-15,24-31
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts flush_l1d
➜ ~ sudo dmidecode -t 2
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 082WXT
Version: A03
Serial Number: xxxxxxxx
Asset Tag: Not Specified
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Not Specified
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
➜ ~ sudo dmidecode -t 0
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: A16
Release Date: 06/20/2018
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 10240 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 4.6
➜ ~ cat /sys/firmware/efi/efivars/LoaderFirmwareType*
UEFI 2.00
Much obliged, @DrGo . This is very helpful information.
Thanks @thac0 , Is there way to prevent swupd repair etc from reinserting the ucode.cpio in the bootloader conf? I needed to install missing libtinfo.so.6 and ended up having to edit the bootloader confg again. I am using version 30710. I have also noticed another initrd that I do not recall seeing before: initrd=\EFI\org.clearlinux\freestanding-i915-firmware.cpio.xz
I experience the exact same issue after trying to install Clear Linux for the first time. Here is the output from my end:
clrlinux@clr-live~ $ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 36 bits physical, 48 bits virtual
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Model name: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz
Stepping: 7
CPU MHz: 2643.451
CPU max MHz: 3300.0000
CPU min MHz: 1600.0000
BogoMIPS: 5986.44
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 6144K
NUMA node0 CPU(s): 0-3
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx lahf_lm epb pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts md_clear flush_l1d
clrlinux@clr-live~ $ sudo dmidecode -t 2
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Foxconn
Product Name: 2ABF
Version: 1.30
Serial Number:
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
sudo dmidecode -t 0
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: AMI
Version: 7.16
Release Date: 03/23/2012
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 7.16
clrlinux@clr-live~ $ cat /sys/firmware/efi/efivars/LoaderFirmwareType*
UEFI 2.10
Same issue here, workaround works. Spec of the system (hope this helps):
dmidecode -t 0
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 1.1a
Release Date: 09/28/2011
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 8192 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 1.26
dmidecode -t 2
# dmidecode 3.2
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: X9SCL/X9SCM
Version: 1.11A
Serial Number: ZM1AU39195
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 36 bits physical, 48 bits virtual
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Model name: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz
Stepping: 7
CPU MHz: 3158.566
CPU max MHz: 3600,0000
CPU min MHz: 1600,0000
BogoMIPS: 6385.59
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm epb pti tpr_shadow vnmi flexpriority ept vpid xsaveopt dtherm ida arat pln pts
dmesg | grep -i microcode
[ 0.148221] calling save_microcode_in_initrd+0x0/0x54 @ 1
[ 0.148224] initcall save_microcode_in_initrd+0x0/0x54 returned 0 after 0 usecs
[ 0.323705] calling microcode_init+0x0/0x20f @ 1
[ 0.323740] microcode: sig=0x206a7, pf=0x2, revision=0x1b
[ 0.323852] microcode: Microcode Update Driver: v2.2.
[ 0.323854] initcall microcode_init+0x0/0x20f returned 0 after 143 usecs
[ 11.171543] microcode: updated to revision 0x2f, date = 2019-02-17
[ 11.173381] core: PEBS enabled due to microcode update
[ 11.173392] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[ 11.173397] microcode: Reload completed, microcode revision: 0x2f
cat /sys/firmware/efi/efivars/LoaderFirmwareType*
UEFI 2.10
uname -a
Linux clearlinux-desktop 5.3.7-853.native #1 SMP Fri Oct 18 13:07:49 PDT 2019 x86_64 GNU/Linux
@thac0, @bryteise Any news on this topic when it is expected to be fixed? Every update where a new kernel version is installed breaks the system atm.
Unfortunately we haven't had any luck getting a similar system locally. Thanks for the reminder but we are a bit stuck in being able to further diagnose the issue =(.
I hope you can find a similar system, although it should be not too difficult to source one:
https://www.amazon.com/gp/aw/d/B004WKRDA4
If there is any other way I can help out (even if you want to login remotely on my system), let me know.
Any progress on this issue? This is still occurring at every update.
@JSEHV Unfortunately not getting a full fix. But we did add support for a workaround to avoid auto-update needing to be disabled. If you create a symlink to /dev/null for the initrds you don't want to be loaded in /etc/kernel/initrd.d it will cause clr-boot-manager to not add those lines to the systemd-boot loader config.
So for example:
# ls /usr/lib/initrd.d
00-intel-ucode.cpio i915-firmware.cpio.xz
# mkdir -p /etc/kernel/initrd.d && cd /etc/kernel/initrd.d
/etc/kernel/initrd.d # ln -s /dev/null 00-intel-ucode.cpio
/etc/kernel/initrd.d # ln -s /dev/null i915-firmware.cpio.xz
Any possibility that this can be added to the clearlinux install on certain systems or mainboards?
@FrankNL1984 I think this probably should stay as a manual work around for those who know they need it given that this involves touching system state and involves disabling other functionality.
https://imgur.com/a/biDHE46 I got this problem while opening folder from code editor. It shows 2 gb only while I have 1TB in my computer.
@chapagaiashim That's really unrelated to this bug.
Sorry, I posted in the wrong section. My mistake.
Same issue on clear install. Workaround worked for me. Waiting for bugfix
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 17HX.M045.20121127.SSH
Release Date: 11/27/2012
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 4.6
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: SAMSUNG ELECTRONICS CO., LTD.
Product Name: RF511/RF411/RF711
Version: 17HX
Serial Number: 123490EN400015
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 36 bits physical, 48 bits virtual
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 42
Model name: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz
Stepping: 7
CPU MHz: 2612.475
CPU max MHz: 2900.0000
CPU min MHz: 800.0000
BogoMIPS: 3990.87
Virtualization: VT-x
L1d cache: 128 KiB
L1i cache: 128 KiB
L2 cache: 1 MiB
L3 cache: 6 MiB
NUMA node0 CPU(s): 0-7
Vulnerability Itlb multihit: KVM: Mitigation: Split huge pages
Vulnerability L1tf: Mitigation; PTE Inversion; VMX conditional cach
e flushes, SMT vulnerable
Vulnerability Mds: Vulnerable: Clear CPU buffers attempted, no mic
rocode; SMT vulnerable
Vulnerability Meltdown: Mitigation; PTI
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user
pointer sanitization
Vulnerability Spectre v2: Mitigation; Full generic retpoline, STIBP disab
led, RSB filling
Vulnerability Tsx async abort: Not affected
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtr
r pge mca cmov pat pse36 clflush dts acpi mmx f
xsr sse sse2 ht tm pbe syscall nx rdtscp lm con
stant_tsc arch_perfmon pebs bts rep_good nopl x
topology nonstop_tsc cpuid aperfmperf pni pclmu
lqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx
16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt t
sc_deadline_timer aes xsave avx lahf_lm epb pti
tpr_shadow vnmi flexpriority ept vpid xsaveopt
dtherm ida arat pln pts
$ cat /sys/firmware/efi/efivars/LoaderFirmwareType*
UEFI 2.00
uname -a
Linux samsung-book 5.5.3-908.native #1 SMP Thu Feb 13 10:46:52 PST 2020 x86_64 GNU/Linux
Same here, The funny thing is that if you change that line to initrd /freestanding-00-intel-ucode.cpio , it works DQ67SW BIOS 70, I7 2600
Files:
root@hyrax/boot/loader/entries # ls -laR /boot/
/boot/:
total 17433
drwx------ 5 root root 1536 Dec 31 1969 .
drwxr-xr-x 19 root root 4096 Jun 3 21:22 ..
drwx------ 2 root root 512 Jun 4 23:35 7689897c59a44016b1df0719cf193287
drwx------ 6 root root 512 Jun 5 00:48 EFI
-rwx------ 1 root root 5926912 Jun 2 16:22 freestanding-00-intel-ucode.cpio
-rwx------ 1 root root 47616 Jun 2 16:22 freestanding-i915-firmware.cpio.xz
-r-x------ 1 root root 119328 Jun 5 00:38 ldlinux.c32
-r-x------ 1 root root 61952 Jun 5 00:38 ldlinux.sys
drwx------ 3 root root 512 Jun 5 17:02 loader
-rwx------ 1 root root 11686080 Jun 2 16:22 org.clearlinux.native.5.17.11-1148
-rwx------ 1 root root 1035 Jun 5 00:25 syslinux.cfg
/boot/7689897c59a44016b1df0719cf193287:
total 2
drwx------ 2 root root 512 Jun 4 23:35 .
drwx------ 5 root root 1536 Dec 31 1969 ..
/boot/EFI:
total 5
drwx------ 6 root root 512 Jun 5 00:48 .
drwx------ 5 root root 1536 Dec 31 1969 ..
drwx------ 2 root root 512 Jun 5 17:53 BOOT
drwx------ 2 root root 512 Jun 4 23:35 Linux
drwx------ 2 root root 1536 Jun 5 17:53 org.clearlinux
drwx------ 2 root root 512 Jun 5 17:53 systemd
/boot/EFI/BOOT:
total 96
drwx------ 2 root root 512 Jun 5 17:53 .
drwx------ 6 root root 512 Jun 5 00:48 ..
-rwx------ 1 root root 97067 Feb 1 2019 BOOTX64.EFI
/boot/EFI/Linux:
total 1
drwx------ 2 root root 512 Jun 4 23:35 .
drwx------ 6 root root 512 Jun 5 00:48 ..
/boot/EFI/org.clearlinux:
total 18512
drwx------ 2 root root 1536 Jun 5 17:53 .
drwx------ 6 root root 512 Jun 5 00:48 ..
-rwx------ 1 root root 1196031 Jun 5 17:53 bootloaderx64.efi
-rwx------ 1 root root 5926912 Jun 5 00:48 freestanding-00-intel-ucode.cpio
-rwx------ 1 root root 47616 Jun 5 00:48 freestanding-i915-firmware.cpio.xz
-rwx------ 1 root root 11686080 Jun 5 00:48 kernel-org.clearlinux.native.5.17.11-1148
-rwx------ 1 root root 97067 Jun 5 17:53 loaderx64.efi
/boot/EFI/systemd:
total 96
drwx------ 2 root root 512 Jun 5 17:53 .
drwx------ 6 root root 512 Jun 5 00:48 ..
-rwx------ 1 root root 97067 Feb 1 2019 systemd-bootx64.efi
/boot/loader:
total 4
drwx------ 3 root root 512 Jun 5 17:02 .
drwx------ 5 root root 1536 Dec 31 1969 ..
drwx------ 2 root root 512 Jun 5 16:53 entries
-rwx------ 1 root root 55 Jun 5 17:02 loader.conf
-rwx------ 1 root root 512 Jun 4 23:35 random-seed
/boot/loader/entries:
total 3
drwx------ 2 root root 512 Jun 5 16:53 .
drwx------ 3 root root 512 Jun 5 17:02 ..
-rwx------ 1 root root 483 Jun 5 00:47 clearlinux.conf
-rwx------ 1 root root 546 Jun 5 00:48 Clear-linux-native-5.17.11-1148.conf
This entry works:
root@hyrax/boot/loader/entries # cat clearlinux.conf
title Clear Linux
linux /org.clearlinux.native.5.17.11-1148
initrd /freestanding-00-intel-ucode.cpio
initrd /freestanding-i915-firmware.cpio.xz
options root=PARTUUID=40ed9442-34e0-443e-8b56-24007f70376c console=tty0 console=ttyS0,115200n8 cryptomgr.notests init=/usr/bin/initra-desktop initcall_debug intel_iommu=igfx_off kvm-intel.nested=1 no_timer_check noreplace-smp page_alloc.shuffle=1 rcupdate.rcu_expedited=1 rootfstype=ext4,btrfs,xfs,f2fs tsc=reliable rw mitigations=off
This doesn't:
root@hyrax/boot/loader/entries # cat Clear-linux-native-5.17.11-1148.conf
title Clear Linux OS
linux /EFI/org.clearlinux/kernel-org.clearlinux.native.5.17.11-1148
initrd /EFI/org.clearlinux/freestanding-00-intel-ucode.cpio
initrd /EFI/org.clearlinux/freestanding-i915-firmware.cpio.xz
options root=PARTUUID=40ed9442-34e0-443e-8b56-24007f70376c console=tty0 console=ttyS0,115200n8 cryptomgr.notests init=/usr/bin/initra-desktop initcall_debug intel_iommu=igfx_off kvm-intel.nested=1 no_timer_check noreplace-smp page_alloc.shuffle=1 rcupdate.rcu_expedited=1 rootfstype=ext4,btrfs,xfs,f2fs tsc=reliable rw mitigations=off
root@hyrax/boot/loader/entries # cat /sys/firmware/efi/efivars/LoaderFirmwareType*
UEFI 2.00
dmidecode
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.6 present.
83 structures occupying 3311 bytes.
Table at 0x000EB170.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Intel Corp.
Version: SWQ6710H.86A.0070.2018.1024.1352
Release Date: 10/24/2018
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 1 MB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: TV Out
External Connector Type: Mini Centronics Type-14
Port Type: Other
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2A
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9C1 - PCIE DOCKING CONN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2B3 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C2 - EXT HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3C1 - GMCH FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D1 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E2 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E3 - LPC HOT DOCKING
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E1 - SCAN MATRIX
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - LPC SIDE BAND
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F1 - UNIFIED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6F1 - LVDS
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - LAI FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - GFX VID
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1G6 - AC JACK
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0020, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X16
Type: x16 PCI Express
Current Usage: Available
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:01.0
Handle 0x0021, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X1
Type: x1 PCI Express
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.4
Handle 0x0022, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X4
Type: x4 PCI Express
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.0
Handle 0x0023, DMI type 9, 17 bytes
System Slot Information
Designation: PCI Slot
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1e.0
Handle 0x0024, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Disabled
Description: Intel(R) 82579LM Gigabit Ethernet Device
Handle 0x0025, DMI type 10, 6 bytes
On Board Device Information
Type: Sound
Status: Disabled
Description: Realtek High Definition Audio Device
Handle 0x0026, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
Handle 0x0027, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.
Handle 0x0028, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: No Error
Number Of Devices: 4
Handle 0x0029, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x002A, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x007FFFFFFFF
Range Size: 32 GB
Physical Array Handle: 0x0028
Partition Width: 1
Handle 0x002B, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: DIMM 3
Bank Locator: Channel A DIMM 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: Kingston
Serial Number: D6282561
Asset Tag: A1_AssetTagNum0
Part Number: 9905471-023.A00LF
Rank: 2
Handle 0x002C, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x002B
Memory Array Mapped Address Handle: 0x002A
Partition Row Position: 1
Handle 0x002E, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: DIMM 1
Bank Locator: Channel A DIMM 1
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: Undefined
Serial Number: 00000000
Asset Tag: A1_AssetTagNum1
Part Number:
Rank: 2
Handle 0x002F, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0030, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00200000000
Ending Address: 0x003FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x002A
Partition Row Position: 1
Handle 0x0031, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: DIMM 4
Bank Locator: Channel B DIMM 0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: Kingston
Serial Number: D728D160
Asset Tag: A1_AssetTagNum2
Part Number: 9905471-023.A00LF
Rank: 2
Handle 0x0032, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0033, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00400000000
Ending Address: 0x005FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x0031
Memory Array Mapped Address Handle: 0x002A
Partition Row Position: 1
Handle 0x0034, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0028
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: DIMM
Set: None
Locator: DIMM 2
Bank Locator: Channel B DIMM 1
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MT/s
Manufacturer: Kingston
Serial Number: D5282861
Asset Tag: A1_AssetTagNum3
Part Number: 9905471-023.A00LF
Rank: 2
Handle 0x0035, DMI type 18, 23 bytes
32-bit Memory Error Information
Type: OK
Granularity: Unknown
Operation: Unknown
Vendor Syndrome: Unknown
Memory Array Address: Unknown
Device Address: Unknown
Resolution: Unknown
Handle 0x0036, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00600000000
Ending Address: 0x007FFFFFFFF
Range Size: 8 GB
Physical Device Handle: 0x0034
Memory Array Mapped Address Handle: 0x002A
Partition Row Position: 1
Handle 0x0037, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0038, DMI type 34, 11 bytes
Management Device
Description: LM78-1
Type: LM78
Address: 0x00000000
Address Type: I/O Port
Handle 0x0039, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x003A, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x003B, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0038
Component Handle: 0x0038
Threshold Handle: 0x0039
Handle 0x003C, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x003D, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x003E, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0038
Component Handle: 0x003B
Threshold Handle: 0x003C
Handle 0x003F, DMI type 27, 14 bytes
Cooling Device
Temperature Probe Handle: 0x003C
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Handle 0x0040, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x0041, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0038
Component Handle: 0x003E
Threshold Handle: 0x003F
Handle 0x0042, DMI type 27, 14 bytes
Cooling Device
Temperature Probe Handle: 0x003C
Type: <OUT OF SPEC>
Status: <OUT OF SPEC>
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Handle 0x0043, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6
Handle 0x0044, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0038
Component Handle: 0x0041
Threshold Handle: 0x0042
Handle 0x0045, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: <OUT OF SPEC>
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0046, DMI type 36, 16 bytes
Management Device Threshold Data
Handle 0x0047, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0038
Component Handle: 0x0044
Threshold Handle: 0x0042
Handle 0x0048, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Not Present
Type: <OUT OF SPEC>
Input Voltage Range Switching: <OUT OF SPEC>
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0039
Cooling Device Handle: 0x003F
Input Current Probe Handle: 0x0045
Handle 0x0049, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Intel(R) 82579LM Gigabit Ethernet Device
Type: Ethernet
Status: Disabled
Type Instance: 1
Bus Address: 0000:00:19.0
Handle 0x004A, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Realtek High Definition Audio Device
Type: Sound
Status: Disabled
Type Instance: 1
Bus Address: 0000:00:1b.0
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: DQ67SW
Version: AAG12527-310
Serial Number: BQSW210001XF
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer:
Product Name:
Version:
Serial Number:
UUID: 80210756-d46c-e111-a909-001320e77720
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: SKTH
Type: Central Processor
Family: Core i7
Manufacturer: Intel(R) Corp.
ID: A7 06 02 00 FF FB EB BF
Signature: Type 0, Family 6, Model 42, Stepping 7
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
Voltage: 1.1 V
External Clock: 100 MHz
Max Speed: 3800 MHz
Current Speed: 3400 MHz
Status: Populated, Enabled
Upgrade: Socket BGA1155
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1 MB
Maximum Size: 1 MB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 8 MB
Maximum Size: 8 MB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x004B, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: Intel(R) HD Graphics Device
Handle 0x004C, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Intel(R) HD Graphics Device
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0
Handle 0x004D, DMI type 10, 6 bytes
On Board Device Information
Type: <OUT OF SPEC>
Status: Disabled
Description: LSI 1394 Device
Handle 0x004E, DMI type 41, 11 bytes
Onboard Device
Reference Designation: LSI 1394 Device
Type: <OUT OF SPEC>
Status: Disabled
Type Instance: 1
Bus Address: 0000:04:03.0
Handle 0x004F, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 4F 00 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001
Handle 0x0050, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 50 00 24 41 4D 54 01 00 00 00 00 A5 1B 02
00 00 00 00
Handle 0x0051, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 51 00 35 00 00 00 07 00 00 00 00 00 35 00
F8 00 4E 1C FF FF FF FF 09 00 00 00 01 00 07 00
C8 0C 5B 00 00 00 00 00 C8 00 FF FF 00 00 00 00
00 00 00 00 36 00 00 00 76 50 72 6F 00 00 00 00
Handle 0x0052, DMI type 127, 4 bytes
End Of Table
root@hyrax/boot/loader/entries # uname -an
Linux hyrax 5.17.11-1148.native #1 SMP Wed May 25 07:48:11 PDT 2022 x86_64 GNU/Linux
dmesg
root@hyrax/boot/loader/entries # dmesg
[ 0.266383] initcall echainiv_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling dh_init+0x0/0x40 @ 1
[ 0.266383] initcall dh_init+0x0/0x40 returned 0 after 0 usecs
[ 0.266383] calling rsa_init+0x0/0x80 @ 1
[ 0.266383] initcall rsa_init+0x0/0x80 returned 0 after 0 usecs
[ 0.266383] calling hmac_module_init+0x0/0x15 @ 1
[ 0.266383] initcall hmac_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_null_mod_init+0x0/0x6b @ 1
[ 0.266383] initcall crypto_null_mod_init+0x0/0x6b returned 0 after 0 usecs
[ 0.266383] calling md5_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall md5_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling sha1_generic_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall sha1_generic_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling sha256_generic_mod_init+0x0/0x1c @ 1
[ 0.266383] initcall sha256_generic_mod_init+0x0/0x1c returned 0 after 0 usecs
[ 0.266383] calling sha512_generic_mod_init+0x0/0x1c @ 1
[ 0.266383] initcall sha512_generic_mod_init+0x0/0x1c returned 0 after 0 usecs
[ 0.266383] calling blake2b_mod_init+0x0/0x1c @ 1
[ 0.266383] initcall blake2b_mod_init+0x0/0x1c returned 0 after 0 usecs
[ 0.266383] calling crypto_ecb_module_init+0x0/0x15 @ 1
[ 0.266383] initcall crypto_ecb_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_cbc_module_init+0x0/0x15 @ 1
[ 0.266383] initcall crypto_cbc_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_cts_module_init+0x0/0x15 @ 1
[ 0.266383] initcall crypto_cts_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling lrw_module_init+0x0/0x15 @ 1
[ 0.266383] initcall lrw_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling xts_module_init+0x0/0x15 @ 1
[ 0.266383] initcall xts_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_ctr_module_init+0x0/0x1c @ 1
[ 0.266383] initcall crypto_ctr_module_init+0x0/0x1c returned 0 after 0 usecs
[ 0.266383] calling crypto_ccm_module_init+0x0/0x1c @ 1
[ 0.266383] initcall crypto_ccm_module_init+0x0/0x1c returned 0 after 0 usecs
[ 0.266383] calling cryptd_init+0x0/0x102 @ 1
[ 0.266383] cryptd: max_cpu_qlen set to 1000
[ 0.266383] initcall cryptd_init+0x0/0x102 returned 0 after 0 usecs
[ 0.266383] calling serpent_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall serpent_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling aes_init+0x0/0x15 @ 1
[ 0.266383] initcall aes_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling arc4_init+0x0/0x15 @ 1
[ 0.266383] initcall arc4_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling deflate_mod_init+0x0/0x44 @ 1
[ 0.266383] initcall deflate_mod_init+0x0/0x44 returned 0 after 0 usecs
[ 0.266383] calling crc32c_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall crc32c_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crc32_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall crc32_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crct10dif_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall crct10dif_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_authenc_module_init+0x0/0x15 @ 1
[ 0.266383] initcall crypto_authenc_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling crypto_authenc_esn_module_init+0x0/0x15 @ 1
[ 0.266383] initcall crypto_authenc_esn_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling lzo_mod_init+0x0/0x3d @ 1
[ 0.266383] initcall lzo_mod_init+0x0/0x3d returned 0 after 0 usecs
[ 0.266383] calling lzorle_mod_init+0x0/0x3d @ 1
[ 0.266383] initcall lzorle_mod_init+0x0/0x3d returned 0 after 0 usecs
[ 0.266383] calling lz4_mod_init+0x0/0x3d @ 1
[ 0.266383] initcall lz4_mod_init+0x0/0x3d returned 0 after 0 usecs
[ 0.266383] calling xxhash_mod_init+0x0/0x15 @ 1
[ 0.266383] initcall xxhash_mod_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266383] calling drbg_init+0x0/0x8b @ 1
[ 0.266383] initcall drbg_init+0x0/0x8b returned 0 after 0 usecs
[ 0.266383] calling zstd_mod_init+0x0/0x3d @ 1
[ 0.266383] initcall zstd_mod_init+0x0/0x3d returned 0 after 0 usecs
[ 0.266383] calling essiv_module_init+0x0/0x15 @ 1
[ 0.266385] initcall essiv_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.266387] calling init_bio+0x0/0xb9 @ 1
[ 0.266394] initcall init_bio+0x0/0xb9 returned 0 after 0 usecs
[ 0.266394] calling blk_ioc_init+0x0/0x36 @ 1
[ 0.266394] initcall blk_ioc_init+0x0/0x36 returned 0 after 0 usecs
[ 0.266394] calling blk_mq_init+0x0/0xcd @ 1
[ 0.266394] initcall blk_mq_init+0x0/0xcd returned 0 after 0 usecs
[ 0.266394] calling genhd_device_init+0x0/0x65 @ 1
[ 0.266394] initcall genhd_device_init+0x0/0x65 returned 0 after 0 usecs
[ 0.266394] calling blkcg_init+0x0/0x30 @ 1
[ 0.266394] initcall blkcg_init+0x0/0x30 returned 0 after 0 usecs
[ 0.266394] calling raid6_select_algo+0x0/0x11a @ 1
[ 0.283179] raid6: sse2x4 gen() 14900 MB/s
[ 0.300179] raid6: sse2x2 gen() 16394 MB/s
[ 0.317178] raid6: sse2x1 gen() 12662 MB/s
[ 0.317275] raid6: using algorithm sse2x2 gen() 16394 MB/s
[ 0.334179] raid6: .... xor() 9190 MB/s, rmw enabled
[ 0.334292] raid6: using ssse3x2 recovery algorithm
[ 0.334402] initcall raid6_select_algo+0x0/0x11a returned 0 after 66406 usecs
[ 0.334404] calling irq_poll_setup+0x0/0x88 @ 1
[ 0.334406] initcall irq_poll_setup+0x0/0x88 returned 0 after 0 usecs
[ 0.334407] calling byt_gpio_init+0x0/0x19 @ 1
[ 0.334413] initcall byt_gpio_init+0x0/0x19 returned 0 after 0 usecs
[ 0.334414] calling gpiolib_debugfs_init+0x0/0x30 @ 1
[ 0.334418] initcall gpiolib_debugfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.334419] calling pwm_debugfs_init+0x0/0x30 @ 1
[ 0.334422] initcall pwm_debugfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.334424] calling pwm_sysfs_init+0x0/0x1e @ 1
[ 0.334427] initcall pwm_sysfs_init+0x0/0x1e returned 0 after 0 usecs
[ 0.334429] calling pci_slot_init+0x0/0x40 @ 1
[ 0.334433] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.334436] calling fbmem_init+0x0/0xe8 @ 1
[ 0.334450] initcall fbmem_init+0x0/0xe8 returned 0 after 0 usecs
[ 0.334452] calling scan_for_dmi_ipmi+0x0/0x23b @ 1
[ 0.334454] initcall scan_for_dmi_ipmi+0x0/0x23b returned 0 after 0 usecs
[ 0.334456] calling acpi_init+0x0/0xfd @ 1
[ 0.334473] ACPI: Added _OSI(Module Device)
[ 0.334570] ACPI: Added _OSI(Processor Device)
[ 0.334670] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.334776] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.334902] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.335003] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.335122] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.339578] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.340581] ACPI: Dynamic OEM Table Load:
[ 0.340679] ACPI: SSDT 0xFFFF9F9D0740B000 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.341427] ACPI: Dynamic OEM Table Load:
[ 0.341523] ACPI: SSDT 0xFFFF9F9BC0167D00 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.343221] ACPI: Interpreter enabled
[ 0.343318] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.343415] ACPI: Using IOAPIC for interrupt routing
[ 0.343550] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.343836] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.344034] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.344219] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.344665] ACPI: Enabled 8 GPEs in block 00 to 3F
[ 0.345035] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.351232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.351378] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.351663] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.351980] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.352165] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.352422] PCI host bridge to bus 0000:00
[ 0.352519] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.352670] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.352822] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.352974] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.353126] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.353179] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff window]
[ 0.353345] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.353480] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x40 @ 1
[ 0.353632] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x40 took 0 usecs
[ 0.353783] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.353932] pci 0000:00:00.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.354095] pci 0000:00:00.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.354216] pci 0000:00:01.0: calling quirk_cmd_compl+0x0/0x80 @ 1
[ 0.354363] pci 0000:00:01.0: quirk_cmd_compl+0x0/0x80 took 0 usecs
[ 0.354505] pci 0000:00:01.0: calling quirk_no_aersid+0x0/0x40 @ 1
[ 0.354649] pci 0000:00:01.0: quirk_no_aersid+0x0/0x40 took 0 usecs
[ 0.354791] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.354942] pci 0000:00:01.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.355104] pci 0000:00:01.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.355179] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x40 @ 1
[ 0.355348] pci 0000:00:01.0: pci_fixup_transparent_bridge+0x0/0x40 took 0 usecs
[ 0.355526] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.355734] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.355876] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.356031] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.356181] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.356316] pci 0000:00:02.0: calling efifb_fixup_resources+0x0/0x100 @ 1
[ 0.356473] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.356589] pci 0000:00:02.0: efifb_fixup_resources+0x0/0x100 took 0 usecs
[ 0.356743] pci 0000:00:02.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.356906] pci 0000:00:02.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.357070] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xc0 @ 1
[ 0.357180] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.357367] pci 0000:00:02.0: pci_fixup_video+0x0/0xc0 took 0 usecs
[ 0.357599] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.357761] pci 0000:00:16.0: reg 0x10: [mem 0xfe704000-0xfe70400f 64bit]
[ 0.357973] pci 0000:00:16.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.358138] pci 0000:00:16.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.358217] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.358430] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.358585] pci 0000:00:1a.0: reg 0x10: [mem 0xfe703000-0xfe7033ff]
[ 0.358794] pci 0000:00:1a.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.358958] pci 0000:00:1a.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.359165] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.359258] pci 0000:00:1c.0: calling quirk_cmd_compl+0x0/0x80 @ 1
[ 0.359403] pci 0000:00:1c.0: quirk_cmd_compl+0x0/0x80 took 0 usecs
[ 0.359545] pci 0000:00:1c.0: calling quirk_no_aersid+0x0/0x40 @ 1
[ 0.359688] pci 0000:00:1c.0: quirk_no_aersid+0x0/0x40 took 0 usecs
[ 0.359829] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.360040] pci 0000:00:1c.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.360179] pci 0000:00:1c.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.360341] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x40 @ 1
[ 0.360506] pci 0000:00:1c.0: pci_fixup_transparent_bridge+0x0/0x40 took 0 usecs
[ 0.360724] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.360889] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.360998] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.361233] pci 0000:00:1c.6: calling quirk_cmd_compl+0x0/0x80 @ 1
[ 0.361379] pci 0000:00:1c.6: quirk_cmd_compl+0x0/0x80 took 0 usecs
[ 0.361520] pci 0000:00:1c.6: calling quirk_no_aersid+0x0/0x40 @ 1
[ 0.361662] pci 0000:00:1c.6: quirk_no_aersid+0x0/0x40 took 0 usecs
[ 0.361802] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.362012] pci 0000:00:1c.6: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.362176] pci 0000:00:1c.6: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.362339] pci 0000:00:1c.6: calling pci_fixup_transparent_bridge+0x0/0x40 @ 1
[ 0.362507] pci 0000:00:1c.6: pci_fixup_transparent_bridge+0x0/0x40 took 0 usecs
[ 0.362725] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.362889] pci 0000:00:1c.6: Enabling MPC IRBNCE
[ 0.362999] pci 0000:00:1c.6: Intel PCH root port ACS workaround enabled
[ 0.363227] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.363384] pci 0000:00:1d.0: reg 0x10: [mem 0xfe702000-0xfe7023ff]
[ 0.363593] pci 0000:00:1d.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.363757] pci 0000:00:1d.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.363964] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.364176] pci 0000:00:1e.0: calling quirk_cmd_compl+0x0/0x80 @ 1
[ 0.364319] pci 0000:00:1e.0: quirk_cmd_compl+0x0/0x80 took 0 usecs
[ 0.364460] pci 0000:00:1e.0: calling quirk_no_aersid+0x0/0x40 @ 1
[ 0.364602] pci 0000:00:1e.0: quirk_no_aersid+0x0/0x40 took 0 usecs
[ 0.364744] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.364934] pci 0000:00:1e.0: calling quirk_use_pcie_bridge_dma_alias+0x0/0x80 @ 1
[ 0.365105] pci 0000:00:1e.0: quirk_use_pcie_bridge_dma_alias+0x0/0x80 took 0 usecs
[ 0.365179] pci 0000:00:1e.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.365342] pci 0000:00:1e.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.365506] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x40 @ 1
[ 0.365671] pci 0000:00:1e.0: pci_fixup_transparent_bridge+0x0/0x40 took 0 usecs
[ 0.365928] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.366165] pci 0000:00:1f.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.366179] pci 0000:00:1f.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.366442] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.366596] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.366734] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.366869] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.367004] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.367139] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.367188] pci 0000:00:1f.2: reg 0x24: [mem 0xfe701000-0xfe7017ff]
[ 0.367343] pci 0000:00:1f.2: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.367506] pci 0000:00:1f.2: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.367712] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.367900] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.368058] pci 0000:00:1f.3: reg 0x10: [mem 0xfe700000-0xfe7000ff 64bit]
[ 0.368207] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.368357] pci 0000:00:1f.3: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.368521] pci 0000:00:1f.3: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.368753] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.368949] pci 0000:02:00.0: calling quirk_f0_vpd_link+0x0/0x80 @ 1
[ 0.369097] pci 0000:02:00.0: quirk_f0_vpd_link+0x0/0x80 took 0 usecs
[ 0.369179] pci 0000:02:00.0: [8086:10c9] type 00 class 0x020000
[ 0.369343] pci 0000:02:00.0: reg 0x10: [mem 0xfe6a0000-0xfe6bffff]
[ 0.369498] pci 0000:02:00.0: reg 0x14: [mem 0xfe680000-0xfe69ffff]
[ 0.369652] pci 0000:02:00.0: reg 0x18: [io 0xe020-0xe03f]
[ 0.369791] pci 0000:02:00.0: reg 0x1c: [mem 0xfe6c4000-0xfe6c7fff]
[ 0.369975] pci 0000:02:00.0: reg 0x30: [mem 0xfe660000-0xfe67ffff pref]
[ 0.370152] pci 0000:02:00.0: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.370179] pci 0000:02:00.0: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.370437] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.370613] pci 0000:02:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 0.370767] pci 0000:02:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[ 0.371012] pci 0000:02:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 0.371165] pci 0000:02:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
[ 0.371353] pci 0000:02:00.1: calling quirk_f0_vpd_link+0x0/0x80 @ 1
[ 0.371500] pci 0000:02:00.1: quirk_f0_vpd_link+0x0/0x80 took 0 usecs
[ 0.371645] pci 0000:02:00.1: [8086:10c9] type 00 class 0x020000
[ 0.371808] pci 0000:02:00.1: reg 0x10: [mem 0xfe640000-0xfe65ffff]
[ 0.371963] pci 0000:02:00.1: reg 0x14: [mem 0xfe620000-0xfe63ffff]
[ 0.372119] pci 0000:02:00.1: reg 0x18: [io 0xe000-0xe01f]
[ 0.372192] pci 0000:02:00.1: reg 0x1c: [mem 0xfe6c0000-0xfe6c3fff]
[ 0.372376] pci 0000:02:00.1: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
[ 0.372552] pci 0000:02:00.1: calling quirk_igfx_skip_te_disable+0x0/0x80 @ 1
[ 0.372715] pci 0000:02:00.1: quirk_igfx_skip_te_disable+0x0/0x80 took 0 usecs
[ 0.372973] pci 0000:02:00.1: PME# supported from D0 D3hot
[ 0.373149] pci 0000:02:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
[ 0.373179] pci 0000:02:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
[ 0.373425] pci 0000:02:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
[ 0.373577] pci 0000:02:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
[ 0.373974] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.374089] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.374182] pci 0000:00:1c.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.374340] pci 0000:00:1c.0: bridge has subordinate 02 but max busn 03
[ 0.374564] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.374736] pci 0000:03:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
[ 0.375080] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.375315] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.375433] pci 0000:00:1c.6: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.375614] pci_bus 0000:04: extended config space not accessible
[ 0.375810] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.375970] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.376128] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.376179] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.376369] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.376556] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.376748] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[ 0.376951] pci 0000:00:1e.0: bridge window [mem 0xbfa00000-0xffffffff window] (subtractive decode)
[ 0.377823] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.378012] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.378203] ACPI: PCI: Interrupt link LNKC configured for IRQ 5
[ 0.378390] ACPI: PCI: Interrupt link LNKD configured for IRQ 4
[ 0.378576] ACPI: PCI: Interrupt link LNKE configured for IRQ 7
[ 0.378765] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.378952] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.379138] ACPI: PCI: Interrupt link LNKH configured for IRQ 3
[ 0.379245] initcall acpi_init+0x0/0xfd returned 0 after 43945 usecs
[ 0.379249] calling adxl_init+0x0/0x173 @ 1
[ 0.379253] initcall adxl_init+0x0/0x173 returned -19 after 0 usecs
[ 0.379255] calling pnp_init+0x0/0x15 @ 1
[ 0.379260] initcall pnp_init+0x0/0x15 returned 0 after 0 usecs
[ 0.379262] calling misc_init+0x0/0xd1 @ 1
[ 0.379266] initcall misc_init+0x0/0xd1 returned 0 after 0 usecs
[ 0.379268] calling tpm_init+0x0/0xf3 @ 1
[ 0.379280] initcall tpm_init+0x0/0xf3 returned 0 after 0 usecs
[ 0.379280] calling iommu_subsys_init+0x0/0xe7 @ 1
[ 0.379280] iommu: Default domain type: Passthrough
[ 0.379300] initcall iommu_subsys_init+0x0/0xe7 returned 0 after 0 usecs
[ 0.379302] calling cn_init+0x0/0x100 @ 1
[ 0.379307] initcall cn_init+0x0/0x100 returned 0 after 0 usecs
[ 0.379309] calling dax_core_init+0x0/0xc9 @ 1
[ 0.379333] initcall dax_core_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.379336] calling dma_buf_init+0x0/0xd1 @ 1
[ 0.379345] initcall dma_buf_init+0x0/0xd1 returned 0 after 0 usecs
[ 0.379348] calling init_scsi+0x0/0x76 @ 1
[ 0.379378] SCSI subsystem initialized
[ 0.379464] initcall init_scsi+0x0/0x76 returned 0 after 0 usecs
[ 0.379467] calling ata_init+0x0/0x59 @ 1
[ 0.379475] libata version 3.00 loaded.
[ 0.379475] initcall ata_init+0x0/0x59 returned 0 after 0 usecs
[ 0.379475] calling vga_arb_device_init+0x0/0xc8 @ 1
[ 0.379475] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.379475] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.379509] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.379638] vgaarb: loaded
[ 0.379701] initcall vga_arb_device_init+0x0/0xc8 returned 0 after 0 usecs
[ 0.380180] calling mdev_init+0x0/0x2f @ 1
[ 0.380190] initcall mdev_init+0x0/0x2f returned 0 after 0 usecs
[ 0.380191] calling usb_common_init+0x0/0x22 @ 1
[ 0.380194] initcall usb_common_init+0x0/0x22 returned 0 after 0 usecs
[ 0.380196] calling usb_init+0x0/0x12d @ 1
[ 0.380201] ACPI: bus type USB registered
[ 0.380303] usbcore: registered new interface driver usbfs
[ 0.380432] usbcore: registered new interface driver hub
[ 0.380557] usbcore: registered new device driver usb
[ 0.380673] initcall usb_init+0x0/0x12d returned 0 after 0 usecs
[ 0.380675] calling serio_init+0x0/0x2f @ 1
[ 0.380680] initcall serio_init+0x0/0x2f returned 0 after 0 usecs
[ 0.380681] calling input_init+0x0/0x100 @ 1
[ 0.380686] initcall input_init+0x0/0x100 returned 0 after 0 usecs
[ 0.380688] calling rtc_init+0x0/0x52 @ 1
[ 0.380691] initcall rtc_init+0x0/0x52 returned 0 after 0 usecs
[ 0.380693] calling dw_i2c_init_driver+0x0/0x19 @ 1
[ 0.380698] initcall dw_i2c_init_driver+0x0/0x19 returned 0 after 0 usecs
[ 0.380700] calling cec_devnode_init+0x0/0xab @ 1
[ 0.380705] initcall cec_devnode_init+0x0/0xab returned 0 after 0 usecs
[ 0.380707] calling pps_init+0x0/0xb3 @ 1
[ 0.380709] pps_core: LinuxPPS API ver. 1 registered
[ 0.380822] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.381023] initcall pps_init+0x0/0xb3 returned 0 after 0 usecs
[ 0.381024] calling ptp_init+0x0/0xa2 @ 1
[ 0.381027] PTP clock support registered
[ 0.381117] initcall ptp_init+0x0/0xa2 returned 0 after 0 usecs
[ 0.381119] calling power_supply_class_init+0x0/0x47 @ 1
[ 0.381125] initcall power_supply_class_init+0x0/0x47 returned 0 after 0 usecs
[ 0.381127] calling hwmon_init+0x0/0xce @ 1
[ 0.381131] initcall hwmon_init+0x0/0xce returned 0 after 0 usecs
[ 0.381132] calling md_init+0x0/0x15c @ 1
[ 0.381138] initcall md_init+0x0/0x15c returned 0 after 0 usecs
[ 0.381138] calling mmc_init+0x0/0x36 @ 1
[ 0.381138] initcall mmc_init+0x0/0x36 returned 0 after 0 usecs
[ 0.381138] calling leds_init+0x0/0x43 @ 1
[ 0.381180] initcall leds_init+0x0/0x43 returned 0 after 976 usecs
[ 0.381182] calling dmi_init+0x0/0x11d @ 1
[ 0.381187] initcall dmi_init+0x0/0x11d returned 0 after 0 usecs
[ 0.381189] calling efisubsys_init+0x0/0x37b @ 1
[ 0.381204] Registered efivars operations
[ 0.381308] initcall efisubsys_init+0x0/0x37b returned 0 after 0 usecs
[ 0.381310] calling intel_scu_ipc_init+0x0/0x1e @ 1
[ 0.381314] initcall intel_scu_ipc_init+0x0/0x1e returned 0 after 0 usecs
[ 0.381317] calling remoteproc_init+0x0/0x35 @ 1
[ 0.381322] initcall remoteproc_init+0x0/0x35 returned 0 after 0 usecs
[ 0.381325] calling hv_acpi_init+0x0/0xda @ 1
[ 0.381327] initcall hv_acpi_init+0x0/0xda returned -19 after 0 usecs
[ 0.381330] calling devfreq_init+0x0/0xdf @ 1
[ 0.381337] initcall devfreq_init+0x0/0xdf returned 0 after 0 usecs
[ 0.381337] calling devfreq_performance_init+0x0/0x15 @ 1
[ 0.381337] initcall devfreq_performance_init+0x0/0x15 returned 0 after 0 usecs
[ 0.381337] calling ras_init+0x0/0x11 @ 1
[ 0.381337] initcall ras_init+0x0/0x11 returned 0 after 0 usecs
[ 0.381337] calling nvmem_init+0x0/0x15 @ 1
[ 0.381337] initcall nvmem_init+0x0/0x15 returned 0 after 0 usecs
[ 0.381337] calling proto_init+0x0/0x15 @ 1
[ 0.381337] initcall proto_init+0x0/0x15 returned 0 after 0 usecs
[ 0.381337] calling net_dev_init+0x0/0x245 @ 1
[ 0.381337] initcall net_dev_init+0x0/0x245 returned 0 after 0 usecs
[ 0.381337] calling neigh_init+0x0/0x91 @ 1
[ 0.381337] initcall neigh_init+0x0/0x91 returned 0 after 0 usecs
[ 0.381337] calling fib_notifier_init+0x0/0x15 @ 1
[ 0.381337] initcall fib_notifier_init+0x0/0x15 returned 0 after 0 usecs
[ 0.381337] calling fib_rules_init+0x0/0xb8 @ 1
[ 0.381337] initcall fib_rules_init+0x0/0xb8 returned 0 after 0 usecs
[ 0.381337] calling init_cgroup_netprio+0x0/0x17 @ 1
[ 0.381337] initcall init_cgroup_netprio+0x0/0x17 returned 0 after 0 usecs
[ 0.381337] calling bpf_lwt_init+0x0/0x1c @ 1
[ 0.381337] initcall bpf_lwt_init+0x0/0x1c returned 0 after 0 usecs
[ 0.381337] calling devlink_init+0x0/0x2b @ 1
[ 0.381337] initcall devlink_init+0x0/0x2b returned 0 after 0 usecs
[ 0.381337] calling pktsched_init+0x0/0x11b @ 1
[ 0.381337] initcall pktsched_init+0x0/0x11b returned 0 after 0 usecs
[ 0.381337] calling tc_filter_init+0x0/0x107 @ 1
[ 0.381337] initcall tc_filter_init+0x0/0x107 returned 0 after 0 usecs
[ 0.381339] calling tc_action_init+0x0/0x61 @ 1
[ 0.381340] initcall tc_action_init+0x0/0x61 returned 0 after 0 usecs
[ 0.381342] calling ethnl_init+0x0/0x56 @ 1
[ 0.381353] initcall ethnl_init+0x0/0x56 returned 0 after 0 usecs
[ 0.381355] calling nexthop_init+0x0/0x102 @ 1
[ 0.381358] initcall nexthop_init+0x0/0x102 returned 0 after 0 usecs
[ 0.381359] calling cipso_v4_init+0x0/0x67 @ 1
[ 0.381362] initcall cipso_v4_init+0x0/0x67 returned 0 after 0 usecs
[ 0.381363] calling wireless_nlevent_init+0x0/0x3d @ 1
[ 0.381366] initcall wireless_nlevent_init+0x0/0x3d returned 0 after 0 usecs
[ 0.381368] calling netlbl_init+0x0/0x7e @ 1
[ 0.381371] NetLabel: Initializing
[ 0.381451] NetLabel: domain hash size = 128
[ 0.381552] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.381691] NetLabel: unlabeled traffic allowed by default
[ 0.381815] initcall netlbl_init+0x0/0x7e returned 0 after 0 usecs
[ 0.381818] calling pci_subsys_init+0x0/0x6a @ 1
[ 0.381820] PCI: Using ACPI for IRQ routing
[ 0.384430] PCI: pci_cache_line_size set to 64 bytes
[ 0.384479] e820: reserve RAM buffer [mem 0x02b1f018-0x03ffffff]
[ 0.384481] e820: reserve RAM buffer [mem 0x02b30018-0x03ffffff]
[ 0.384482] e820: reserve RAM buffer [mem 0x02b41018-0x03ffffff]
[ 0.384483] e820: reserve RAM buffer [mem 0xbc856000-0xbfffffff]
[ 0.384484] e820: reserve RAM buffer [mem 0xbc9a3000-0xbfffffff]
[ 0.384486] e820: reserve RAM buffer [mem 0xbcbc3000-0xbfffffff]
[ 0.384487] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[ 0.384488] e820: reserve RAM buffer [mem 0x83e600000-0x83fffffff]
[ 0.384490] initcall pci_subsys_init+0x0/0x6a returned 0 after 2929 usecs
[ 0.384574] calling nmi_warning_debugfs+0x0/0x30 @ 1
[ 0.384578] initcall nmi_warning_debugfs+0x0/0x30 returned 0 after 0 usecs
[ 0.384581] calling save_microcode_in_initrd+0x0/0x59 @ 1
[ 0.385577] initcall save_microcode_in_initrd+0x0/0x59 returned 0 after 976 usecs
[ 0.385584] calling hpet_late_init+0x0/0x117 @ 1
[ 0.385589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.385739] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.387178] initcall hpet_late_init+0x0/0x117 returned 0 after 1953 usecs
[ 0.387180] calling init_amd_nbs+0x0/0x100 @ 1
[ 0.387186] initcall init_amd_nbs+0x0/0x100 returned 0 after 0 usecs
[ 0.387188] calling iomem_init_inode+0x0/0x88 @ 1
[ 0.387212] initcall iomem_init_inode+0x0/0x88 returned 0 after 0 usecs
[ 0.387214] calling em_debug_init+0x0/0x22 @ 1
[ 0.387220] initcall em_debug_init+0x0/0x22 returned 0 after 0 usecs
[ 0.387222] calling clocksource_done_booting+0x0/0x45 @ 1
[ 0.387240] clocksource: Switched to clocksource tsc-early
[ 0.387367] initcall clocksource_done_booting+0x0/0x45 returned 0 after 128 usecs
[ 0.387369] calling tracer_init_tracefs+0x0/0x29c @ 1
[ 0.396860] initcall tracer_init_tracefs+0x0/0x29c returned 0 after 9323 usecs
[ 0.396868] calling init_trace_printk_function_export+0x0/0x39 @ 1
[ 0.396872] initcall init_trace_printk_function_export+0x0/0x39 returned 0 after 1 usecs
[ 0.396875] calling bpf_event_init+0x0/0x17 @ 1
[ 0.396878] initcall bpf_event_init+0x0/0x17 returned 0 after 0 usecs
[ 0.396880] calling init_dynamic_event+0x0/0x4a @ 1
[ 0.396883] initcall init_dynamic_event+0x0/0x4a returned 0 after 1 usecs
[ 0.396886] calling init_uprobe_trace+0x0/0x69 @ 1
[ 0.396890] initcall init_uprobe_trace+0x0/0x69 returned 0 after 2 usecs
[ 0.396892] calling bpf_init+0x0/0x4d @ 1
[ 0.396898] initcall bpf_init+0x0/0x4d returned 0 after 4 usecs
[ 0.396901] calling secretmem_init+0x0/0x40 @ 1
[ 0.396906] initcall secretmem_init+0x0/0x40 returned 0 after 0 usecs
[ 0.396909] calling init_fs_stat_sysctls+0x0/0x35 @ 1
[ 0.396917] initcall init_fs_stat_sysctls+0x0/0x35 returned 0 after 4 usecs
[ 0.396920] calling init_fs_exec_sysctls+0x0/0x29 @ 1
[ 0.396923] initcall init_fs_exec_sysctls+0x0/0x29 returned 0 after 0 usecs
[ 0.396925] calling init_pipe_fs+0x0/0x66 @ 1
[ 0.396943] initcall init_pipe_fs+0x0/0x66 returned 0 after 15 usecs
[ 0.396947] calling init_fs_namei_sysctls+0x0/0x29 @ 1
[ 0.396951] initcall init_fs_namei_sysctls+0x0/0x29 returned 0 after 1 usecs
[ 0.396953] calling init_fs_dcache_sysctls+0x0/0x29 @ 1
[ 0.396957] initcall init_fs_dcache_sysctls+0x0/0x29 returned 0 after 1 usecs
[ 0.396960] calling init_fs_namespace_sysctls+0x0/0x29 @ 1
[ 0.396963] initcall init_fs_namespace_sysctls+0x0/0x29 returned 0 after 0 usecs
[ 0.396966] calling cgroup_writeback_init+0x0/0x2d @ 1
[ 0.396972] initcall cgroup_writeback_init+0x0/0x2d returned 0 after 3 usecs
[ 0.396975] calling inotify_user_setup+0x0/0xb6 @ 1
[ 0.396982] initcall inotify_user_setup+0x0/0xb6 returned 0 after 5 usecs
[ 0.396983] calling eventpoll_init+0x0/0xc1 @ 1
[ 0.396993] initcall eventpoll_init+0x0/0xc1 returned 0 after 8 usecs
[ 0.396995] calling anon_inode_init+0x0/0x5e @ 1
[ 0.397002] initcall anon_inode_init+0x0/0x5e returned 0 after 5 usecs
[ 0.397003] calling init_dax_wait_table+0x0/0x3b @ 1
[ 0.397020] initcall init_dax_wait_table+0x0/0x3b returned 0 after 15 usecs
[ 0.397022] calling proc_locks_init+0x0/0x37 @ 1
[ 0.397025] initcall proc_locks_init+0x0/0x37 returned 0 after 1 usecs
[ 0.397027] calling init_fs_coredump_sysctls+0x0/0x29 @ 1
[ 0.397031] initcall init_fs_coredump_sysctls+0x0/0x29 returned 0 after 2 usecs
[ 0.397033] calling iomap_init+0x0/0x2a @ 1
[ 0.397042] initcall iomap_init+0x0/0x2a returned 0 after 7 usecs
[ 0.397044] calling proc_cmdline_init+0x0/0x2e @ 1
[ 0.397046] initcall proc_cmdline_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397048] calling proc_consoles_init+0x0/0x34 @ 1
[ 0.397051] initcall proc_consoles_init+0x0/0x34 returned 0 after 1 usecs
[ 0.397052] calling proc_cpuinfo_init+0x0/0x28 @ 1
[ 0.397054] initcall proc_cpuinfo_init+0x0/0x28 returned 0 after 0 usecs
[ 0.397056] calling proc_devices_init+0x0/0x34 @ 1
[ 0.397058] initcall proc_devices_init+0x0/0x34 returned 0 after 0 usecs
[ 0.397059] calling proc_interrupts_init+0x0/0x34 @ 1
[ 0.397061] initcall proc_interrupts_init+0x0/0x34 returned 0 after 0 usecs
[ 0.397063] calling proc_loadavg_init+0x0/0x2e @ 1
[ 0.397065] initcall proc_loadavg_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397066] calling proc_meminfo_init+0x0/0x2e @ 1
[ 0.397068] initcall proc_meminfo_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397070] calling proc_stat_init+0x0/0x28 @ 1
[ 0.397072] initcall proc_stat_init+0x0/0x28 returned 0 after 0 usecs
[ 0.397073] calling proc_uptime_init+0x0/0x2e @ 1
[ 0.397075] initcall proc_uptime_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397077] calling proc_version_init+0x0/0x2e @ 1
[ 0.397079] initcall proc_version_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397080] calling proc_softirqs_init+0x0/0x2e @ 1
[ 0.397082] initcall proc_softirqs_init+0x0/0x2e returned 0 after 0 usecs
[ 0.397084] calling proc_kmsg_init+0x0/0x2b @ 1
[ 0.397086] initcall proc_kmsg_init+0x0/0x2b returned 0 after 0 usecs
[ 0.397088] calling proc_page_init+0x0/0x5f @ 1
[ 0.397090] initcall proc_page_init+0x0/0x5f returned 0 after 1 usecs
[ 0.397092] calling proc_boot_config_init+0x0/0x89 @ 1
[ 0.397094] initcall proc_boot_config_init+0x0/0x89 returned 0 after 0 usecs
[ 0.397096] calling init_ramfs_fs+0x0/0x15 @ 1
[ 0.397098] initcall init_ramfs_fs+0x0/0x15 returned 0 after 0 usecs
[ 0.397100] calling init_hugetlbfs_fs+0x0/0x108 @ 1
[ 0.397113] initcall init_hugetlbfs_fs+0x0/0x108 returned 0 after 10 usecs
[ 0.397115] calling safesetid_init_securityfs+0x0/0x9a @ 1
[ 0.397134] initcall safesetid_init_securityfs+0x0/0x9a returned 0 after 15 usecs
[ 0.397136] calling dynamic_debug_init_control+0x0/0x93 @ 1
[ 0.397141] initcall dynamic_debug_init_control+0x0/0x93 returned 0 after 3 usecs
[ 0.397143] calling acpi_event_init+0x0/0x36 @ 1
[ 0.397154] initcall acpi_event_init+0x0/0x36 returned 0 after 8 usecs
[ 0.397157] calling acpi_init_fpdt+0x0/0x86 @ 1
[ 0.397161] initcall acpi_init_fpdt+0x0/0x86 returned 0 after 1 usecs
[ 0.397163] calling pnp_system_init+0x0/0x15 @ 1
[ 0.397174] initcall pnp_system_init+0x0/0x15 returned 0 after 9 usecs
[ 0.397175] calling pnpacpi_init+0x0/0x73 @ 1
[ 0.397177] pnp: PnP ACPI init
[ 0.397405] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.397557] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.397706] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.397860] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.398009] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.398309] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.398716] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.399184] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.399319] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.399452] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.399586] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.399720] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.399867] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.400023] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.400172] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.400379] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.400726] pnp: PnP ACPI: found 7 devices
[ 0.400822] initcall pnpacpi_init+0x0/0x73 returned 0 after 3560 usecs
[ 0.400824] calling chr_dev_init+0x0/0xb2 @ 1
[ 0.401884] initcall chr_dev_init+0x0/0xb2 returned 0 after 1033 usecs
[ 0.401887] calling firmware_class_init+0x0/0xfd @ 1
[ 0.401896] initcall firmware_class_init+0x0/0xfd returned 0 after 5 usecs
[ 0.401898] calling map_properties+0x0/0x176 @ 1
[ 0.401902] initcall map_properties+0x0/0x176 returned 0 after 0 usecs
[ 0.401904] calling init_acpi_pm_clocksource+0x0/0xe4 @ 1
[ 0.406430] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.406630] initcall init_acpi_pm_clocksource+0x0/0xe4 returned 0 after 4612 usecs
[ 0.406633] calling powercap_init+0x0/0x27 @ 1
[ 0.406657] initcall powercap_init+0x0/0x27 returned 0 after 21 usecs
[ 0.406660] calling rapl_init+0x0/0xa7 @ 1
[ 0.406676] initcall rapl_init+0x0/0xa7 returned 0 after 13 usecs
[ 0.406679] calling sysctl_core_init+0x0/0x33 @ 1
[ 0.406693] initcall sysctl_core_init+0x0/0x33 returned 0 after 11 usecs
[ 0.406696] calling eth_offload_init+0x0/0x17 @ 1
[ 0.406697] initcall eth_offload_init+0x0/0x17 returned 0 after 0 usecs
[ 0.406699] calling ipv4_offload_init+0x0/0x79 @ 1
[ 0.406701] initcall ipv4_offload_init+0x0/0x79 returned 0 after 0 usecs
[ 0.406703] calling inet_init+0x0/0x27c @ 1
[ 0.406716] NET: Registered PF_INET protocol family
[ 0.406988] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.409075] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.409324] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.409770] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.410036] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.410296] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.410558] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.410775] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.411027] initcall inet_init+0x0/0x27c returned 0 after 4221 usecs
[ 0.411032] calling af_unix_init+0x0/0xc3 @ 1
[ 0.411039] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.411168] initcall af_unix_init+0x0/0xc3 returned 0 after 129 usecs
[ 0.411170] calling ipv6_offload_init+0x0/0x84 @ 1
[ 0.411173] initcall ipv6_offload_init+0x0/0x84 returned 0 after 0 usecs
[ 0.411175] calling vlan_offload_init+0x0/0x23 @ 1
[ 0.411177] initcall vlan_offload_init+0x0/0x23 returned 0 after 0 usecs
[ 0.411182] calling xsk_init+0x0/0xc8 @ 1
[ 0.411185] NET: Registered PF_XDP protocol family
[ 0.411294] initcall xsk_init+0x0/0xc8 returned 0 after 107 usecs
[ 0.411297] calling pcibios_assign_resources+0x0/0xd3 @ 1
[ 0.411309] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.411430] pci 0000:02:00.0: BAR 7: assigned [mem 0xfe6c8000-0xfe6e7fff 64bit]
[ 0.411600] pci 0000:02:00.0: BAR 10: no space for [mem size 0x00020000 64bit]
[ 0.411761] pci 0000:02:00.0: BAR 10: failed to assign [mem size 0x00020000 64bit]
[ 0.411929] pci 0000:02:00.1: BAR 7: no space for [mem size 0x00020000 64bit]
[ 0.412088] pci 0000:02:00.1: BAR 7: failed to assign [mem size 0x00020000 64bit]
[ 0.412256] pci 0000:02:00.1: BAR 10: no space for [mem size 0x00020000 64bit]
[ 0.412416] pci 0000:02:00.1: BAR 10: failed to assign [mem size 0x00020000 64bit]
[ 0.412584] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.412698] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.412839] pci 0000:00:1c.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.412999] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.413116] pci 0000:00:1c.6: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.413279] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.413396] pci 0000:00:1e.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.413557] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[ 0.413756] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.413895] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.414033] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.414172] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.414312] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.414466] pci_bus 0000:00: resource 9 [mem 0xbfa00000-0xffffffff window]
[ 0.414620] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.414745] pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.414884] pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.415025] pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.415166] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 0.415306] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.415445] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 0.415584] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 0.415722] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.415874] pci_bus 0000:04: resource 9 [mem 0xbfa00000-0xffffffff window]
[ 0.416082] initcall pcibios_assign_resources+0x0/0xd3 returned 0 after 4671 usecs
[ 0.416085] calling pci_apply_final_quirks+0x0/0x103 @ 1
[ 0.416093] pci 0000:00:02.0: calling disable_igfx_irq+0x0/0x80 @ 1
[ 0.416250] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.416421] pci 0000:00:02.0: disable_igfx_irq+0x0/0x80 took 177 usecs
[ 0.416572] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x100 @ 1
[ 0.540292] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x100 took 120665 usecs
[ 0.540472] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x100 @ 1
[ 0.664287] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x100 took 120757 usecs
[ 0.664469] pci 0000:02:00.0: calling quirk_e100_interrupt+0x0/0x140 @ 1
[ 0.664623] pci 0000:02:00.0: quirk_e100_interrupt+0x0/0x140 took 0 usecs
[ 0.664780] pci 0000:02:00.1: calling quirk_e100_interrupt+0x0/0x140 @ 1
[ 0.664933] pci 0000:02:00.1: quirk_e100_interrupt+0x0/0x140 took 0 usecs
[ 0.665089] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x100 @ 1
[ 0.665374] pci 0000:03:00.0: quirk_usb_early_handoff+0x0/0x100 took 118 usecs
[ 0.665542] PCI: CLS 64 bytes, default 64
[ 0.665634] initcall pci_apply_final_quirks+0x0/0x103 returned 0 after 243697 usecs
[ 0.665637] calling acpi_reserve_resources+0x0/0xf2 @ 1
[ 0.665640] initcall acpi_reserve_resources+0x0/0xf2 returned 0 after 1 usecs
[ 0.665642] calling populate_rootfs+0x0/0x45 @ 1
[ 0.665648] initcall populate_rootfs+0x0/0x45 returned 0 after 2 usecs
[ 0.665650] calling pci_iommu_init+0x0/0x40 @ 1
[ 0.665664] DMAR: No ATSR found
[ 0.665700] Trying to unpack rootfs image as initramfs...
[ 0.665737] DMAR: No SATC found
[ 0.665738] DMAR: dmar1: Using Queued invalidation
[ 0.666095] pci 0000:00:00.0: Adding to iommu group 0
[ 0.666230] pci 0000:00:01.0: Adding to iommu group 1
[ 0.666357] pci 0000:00:16.0: Adding to iommu group 2
[ 0.666491] pci 0000:00:1a.0: Adding to iommu group 3
[ 0.666629] pci 0000:00:1c.0: Adding to iommu group 4
[ 0.666764] pci 0000:00:1c.6: Adding to iommu group 5
[ 0.666902] pci 0000:00:1d.0: Adding to iommu group 6
[ 0.667038] pci 0000:00:1e.0: Adding to iommu group 7
[ 0.667189] pci 0000:00:1f.0: Adding to iommu group 8
[ 0.667325] pci 0000:00:1f.2: Adding to iommu group 8
[ 0.667452] pci 0000:00:1f.3: Adding to iommu group 8
[ 0.667576] pci 0000:02:00.0: Adding to iommu group 9
[ 0.667697] pci 0000:02:00.1: Adding to iommu group 10
[ 0.667818] pci 0000:03:00.0: Adding to iommu group 11
[ 0.667958] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.668101] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.668249] software IO TLB: mapped [mem 0x00000000b8856000-0x00000000bc856000] (64MB)
[ 0.668426] initcall pci_iommu_init+0x0/0x40 returned 0 after 2709 usecs
[ 0.668430] calling ir_dev_scope_init+0x0/0x36 @ 1
[ 0.668433] initcall ir_dev_scope_init+0x0/0x36 returned 0 after 0 usecs
[ 0.668522] calling ia32_binfmt_init+0x0/0x17 @ 1
[ 0.668528] initcall ia32_binfmt_init+0x0/0x17 returned 0 after 3 usecs
[ 0.668530] calling rapl_pmu_init+0x0/0xe4 @ 1
[ 0.668600] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 0.668777] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.668906] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.669032] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 0.669160] initcall rapl_pmu_init+0x0/0xe4 returned 0 after 613 usecs
[ 0.669162] calling amd_ibs_init+0x0/0x203 @ 1
[ 0.669164] initcall amd_ibs_init+0x0/0x203 returned -19 after 0 usecs
[ 0.669166] calling amd_iommu_pc_init+0x0/0x6d @ 1
[ 0.669169] initcall amd_iommu_pc_init+0x0/0x6d returned -19 after 0 usecs
[ 0.669171] calling msr_init+0x0/0x5f @ 1
[ 0.669175] initcall msr_init+0x0/0x5f returned 0 after 1 usecs
[ 0.669177] calling intel_uncore_init+0x0/0x1dc @ 1
[ 0.669339] initcall intel_uncore_init+0x0/0x1dc returned 0 after 151 usecs
[ 0.669342] calling cstate_pmu_init+0x0/0x1b1 @ 1
[ 0.669381] initcall cstate_pmu_init+0x0/0x1b1 returned 0 after 36 usecs
[ 0.669384] calling kvm_x86_init+0x0/0xe @ 1
[ 0.669387] initcall kvm_x86_init+0x0/0xe returned 0 after 0 usecs
[ 0.669389] calling vmx_init+0x0/0x128 @ 1
[ 0.672741] initcall vmx_init+0x0/0x128 returned 0 after 3271 usecs
[ 0.672745] calling register_kernel_offset_dumper+0x0/0x20 @ 1
[ 0.672748] initcall register_kernel_offset_dumper+0x0/0x20 returned 0 after 0 usecs
[ 0.672751] calling i8259A_init_ops+0x0/0x2a @ 1
[ 0.672753] initcall i8259A_init_ops+0x0/0x2a returned 0 after 0 usecs
[ 0.672756] calling init_tsc_clocksource+0x0/0x9f @ 1
[ 0.672759] initcall init_tsc_clocksource+0x0/0x9f returned 0 after 1 usecs
[ 0.672760] calling add_rtc_cmos+0x0/0xb9 @ 1
[ 0.672763] initcall add_rtc_cmos+0x0/0xb9 returned 0 after 0 usecs
[ 0.672765] calling i8237A_init_ops+0x0/0x42 @ 1
[ 0.672769] initcall i8237A_init_ops+0x0/0x42 returned -19 after 2 usecs
[ 0.672771] calling umwait_init+0x0/0xb0 @ 1
[ 0.672773] initcall umwait_init+0x0/0xb0 returned -19 after 0 usecs
[ 0.672775] calling sgx_init+0x0/0xe3 @ 1
[ 0.672777] initcall sgx_init+0x0/0xe3 returned -19 after 0 usecs
[ 0.672779] calling msr_init+0x0/0xed @ 1
[ 0.673109] initcall msr_init+0x0/0xed returned 0 after 319 usecs
[ 0.673112] calling cpuid_init+0x0/0xed @ 1
[ 0.673469] initcall cpuid_init+0x0/0xed returned 0 after 346 usecs
[ 0.673473] calling ioapic_init_ops+0x0/0x17 @ 1
[ 0.673475] initcall ioapic_init_ops+0x0/0x17 returned 0 after 0 usecs
[ 0.673477] calling register_e820_pmem+0x0/0x53 @ 1
[ 0.673480] initcall register_e820_pmem+0x0/0x53 returned 0 after 1 usecs
[ 0.673482] calling start_periodic_check_for_corruption+0x0/0x40 @ 1
[ 0.673486] initcall start_periodic_check_for_corruption+0x0/0x40 returned 0 after 0 usecs
[ 0.673488] calling audit_classes_init+0x0/0xb4 @ 1
[ 0.673491] initcall audit_classes_init+0x0/0xb4 returned 0 after 1 usecs
[ 0.673493] calling serpent_init+0x0/0x4f @ 1
[ 0.673557] initcall serpent_init+0x0/0x4f returned 0 after 59 usecs
[ 0.673561] calling init+0x0/0x78 @ 1
[ 0.673563] AVX2 instructions are not detected.
[ 0.673669] initcall init+0x0/0x78 returned -19 after 103 usecs
[ 0.673671] calling init+0x0/0x72 @ 1
[ 0.673677] initcall init+0x0/0x72 returned 0 after 3 usecs
[ 0.673679] calling camellia_aesni_init+0x0/0x84 @ 1
[ 0.673725] initcall camellia_aesni_init+0x0/0x84 returned 0 after 41 usecs
[ 0.673728] calling camellia_aesni_init+0x0/0x92 @ 1
[ 0.673731] AVX2 or AES-NI instructions are not detected.
[ 0.673858] initcall camellia_aesni_init+0x0/0x92 returned -19 after 123 usecs
[ 0.673861] calling sha1_ssse3_mod_init+0x0/0x94 @ 1
[ 0.673866] initcall sha1_ssse3_mod_init+0x0/0x94 returned 0 after 3 usecs
[ 0.673869] calling sha256_ssse3_mod_init+0x0/0xaa @ 1
[ 0.673876] initcall sha256_ssse3_mod_init+0x0/0xaa returned 0 after 4 usecs
[ 0.673879] calling sha512_ssse3_mod_init+0x0/0x82 @ 1
[ 0.673886] initcall sha512_ssse3_mod_init+0x0/0x82 returned 0 after 4 usecs
[ 0.673888] calling blake2s_mod_init+0x0/0x77 @ 1
[ 0.673900] initcall blake2s_mod_init+0x0/0x77 returned 0 after 8 usecs
[ 0.673903] calling crc32c_intel_mod_init+0x0/0x5c @ 1
[ 0.673907] initcall crc32c_intel_mod_init+0x0/0x5c returned 0 after 1 usecs
[ 0.673910] calling iosf_mbi_init+0x0/0x31 @ 1
[ 0.673919] initcall iosf_mbi_init+0x0/0x31 returned 0 after 8 usecs
[ 0.673921] calling proc_execdomains_init+0x0/0x2e @ 1
[ 0.673925] initcall proc_execdomains_init+0x0/0x2e returned 0 after 2 usecs
[ 0.673926] calling register_warn_debugfs+0x0/0x30 @ 1
[ 0.673929] initcall register_warn_debugfs+0x0/0x30 returned 0 after 1 usecs
[ 0.673931] calling cpuhp_sysfs_init+0x0/0x85 @ 1
[ 0.673947] initcall cpuhp_sysfs_init+0x0/0x85 returned 0 after 14 usecs
[ 0.673949] calling ioresources_init+0x0/0x59 @ 1
[ 0.673952] initcall ioresources_init+0x0/0x59 returned 0 after 1 usecs
[ 0.673954] calling psi_proc_init+0x0/0x82 @ 1
[ 0.673956] initcall psi_proc_init+0x0/0x82 returned 0 after 0 usecs
[ 0.673958] calling snapshot_device_init+0x0/0x15 @ 1
[ 0.673977] initcall snapshot_device_init+0x0/0x15 returned 0 after 16 usecs
[ 0.673979] calling irq_pm_init_ops+0x0/0x17 @ 1
[ 0.673981] initcall irq_pm_init_ops+0x0/0x17 returned 0 after 0 usecs
[ 0.673984] calling timekeeping_init_ops+0x0/0x17 @ 1
[ 0.673986] initcall timekeeping_init_ops+0x0/0x17 returned 0 after 0 usecs
[ 0.673988] calling init_clocksource_sysfs+0x0/0x29 @ 1
[ 0.674008] initcall init_clocksource_sysfs+0x0/0x29 returned 0 after 16 usecs
[ 0.674011] calling init_timer_list_procfs+0x0/0x41 @ 1
[ 0.674014] initcall init_timer_list_procfs+0x0/0x41 returned 0 after 1 usecs
[ 0.674017] calling alarmtimer_init+0x0/0xd1 @ 1
[ 0.674025] initcall alarmtimer_init+0x0/0xd1 returned 0 after 6 usecs
[ 0.674028] calling init_posix_timers+0x0/0x36 @ 1
[ 0.674031] initcall init_posix_timers+0x0/0x36 returned 0 after 0 usecs
[ 0.674033] calling clockevents_init_sysfs+0x0/0xc1 @ 1
[ 0.674095] initcall clockevents_init_sysfs+0x0/0xc1 returned 0 after 58 usecs
[ 0.674098] calling proc_dma_init+0x0/0x2e @ 1
[ 0.674101] initcall proc_dma_init+0x0/0x2e returned 0 after 0 usecs
[ 0.674103] calling proc_modules_init+0x0/0x40 @ 1
[ 0.674106] initcall proc_modules_init+0x0/0x40 returned 0 after 0 usecs
[ 0.674109] calling kallsyms_init+0x0/0x2b @ 1
[ 0.674111] initcall kallsyms_init+0x0/0x2b returned 0 after 0 usecs
[ 0.674114] calling pid_namespaces_init+0x0/0x4c @ 1
[ 0.674122] initcall pid_namespaces_init+0x0/0x4c returned 0 after 6 usecs
[ 0.674125] calling audit_watch_init+0x0/0x3b @ 1
[ 0.674128] initcall audit_watch_init+0x0/0x3b returned 0 after 0 usecs
[ 0.674130] calling audit_fsnotify_init+0x0/0x3b @ 1
[ 0.674133] initcall audit_fsnotify_init+0x0/0x3b returned 0 after 0 usecs
[ 0.674135] calling audit_tree_init+0x0/0x7a @ 1
[ 0.674139] initcall audit_tree_init+0x0/0x7a returned 0 after 0 usecs
[ 0.674141] calling seccomp_sysctl_init+0x0/0x31 @ 1
[ 0.674146] initcall seccomp_sysctl_init+0x0/0x31 returned 0 after 2 usecs
[ 0.674149] calling utsname_sysctl_init+0x0/0x17 @ 1
[ 0.674155] initcall utsname_sysctl_init+0x0/0x17 returned 0 after 4 usecs
[ 0.674158] calling init_tracepoints+0x0/0x2b @ 1
[ 0.674161] initcall init_tracepoints+0x0/0x2b returned 0 after 0 usecs
[ 0.674164] calling init_lstats_procfs+0x0/0x2b @ 1
[ 0.674167] initcall init_lstats_procfs+0x0/0x2b returned 0 after 0 usecs
[ 0.674169] calling init_blk_tracer+0x0/0x54 @ 1
[ 0.674183] initcall init_blk_tracer+0x0/0x54 returned 0 after 11 usecs
[ 0.674186] calling perf_event_sysfs_init+0x0/0x8d @ 1
[ 0.674337] initcall perf_event_sysfs_init+0x0/0x8d returned 0 after 144 usecs
[ 0.674339] calling system_trusted_keyring_init+0x0/0x70 @ 1
[ 0.674341] Initialise system trusted keyrings
[ 0.674448] initcall system_trusted_keyring_init+0x0/0x70 returned 0 after 104 usecs
[ 0.674450] calling kswapd_init+0x0/0x67 @ 1
[ 0.674471] initcall kswapd_init+0x0/0x67 returned 0 after 18 usecs
[ 0.674473] calling extfrag_debug_init+0x0/0x61 @ 1
[ 0.674477] initcall extfrag_debug_init+0x0/0x61 returned 0 after 2 usecs
[ 0.674479] calling mm_compute_batch_init+0x0/0x22 @ 1
[ 0.674482] initcall mm_compute_batch_init+0x0/0x22 returned 0 after 0 usecs
[ 0.674484] calling workingset_init+0x0/0x96 @ 1
[ 0.674486] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.674632] initcall workingset_init+0x0/0x96 returned 0 after 142 usecs
[ 0.674634] calling proc_vmalloc_init+0x0/0x42 @ 1
[ 0.674637] initcall proc_vmalloc_init+0x0/0x42 returned 0 after 0 usecs
[ 0.674639] calling procswaps_init+0x0/0x28 @ 1
[ 0.674642] initcall procswaps_init+0x0/0x28 returned 0 after 0 usecs
[ 0.674644] calling init_frontswap+0x0/0x9a @ 1
[ 0.674650] initcall init_frontswap+0x0/0x9a returned 0 after 3 usecs
[ 0.674652] calling slab_sysfs_init+0x0/0xf2 @ 1
[ 0.675423] initcall slab_sysfs_init+0x0/0xf2 returned 0 after 750 usecs
[ 0.675428] calling init_zbud+0x0/0x23 @ 1
[ 0.675430] zbud: loaded
[ 0.675497] initcall init_zbud+0x0/0x23 returned 0 after 65 usecs
[ 0.675500] calling init_z3fold+0x0/0x3c @ 1
[ 0.675517] initcall init_z3fold+0x0/0x3c returned 0 after 14 usecs
[ 0.675520] calling fcntl_init+0x0/0x36 @ 1
[ 0.675527] initcall fcntl_init+0x0/0x36 returned 0 after 4 usecs
[ 0.675529] calling proc_filesystems_init+0x0/0x2e @ 1
[ 0.675533] initcall proc_filesystems_init+0x0/0x2e returned 0 after 0 usecs
[ 0.675536] calling start_dirtytime_writeback+0x0/0x1a @ 1
[ 0.675539] initcall start_dirtytime_writeback+0x0/0x1a returned 0 after 1 usecs
[ 0.675542] calling dio_init+0x0/0x39 @ 1
[ 0.675556] initcall dio_init+0x0/0x39 returned 0 after 12 usecs
[ 0.675558] calling dnotify_init+0x0/0x9f @ 1
[ 0.675575] initcall dnotify_init+0x0/0x9f returned 0 after 15 usecs
[ 0.675577] calling fanotify_user_setup+0x0/0x123 @ 1
[ 0.675584] initcall fanotify_user_setup+0x0/0x123 returned 0 after 5 usecs
[ 0.675585] calling aio_setup+0x0/0x9f @ 1
[ 0.675603] initcall aio_setup+0x0/0x9f returned 0 after 16 usecs
[ 0.675605] calling io_uring_init+0x0/0x39 @ 1
[ 0.675608] initcall io_uring_init+0x0/0x39 returned 0 after 1 usecs
[ 0.675609] calling mbcache_init+0x0/0x3d @ 1
[ 0.675621] initcall mbcache_init+0x0/0x3d returned 0 after 9 usecs
[ 0.675623] calling init_devpts_fs+0x0/0x2b @ 1
[ 0.675630] initcall init_devpts_fs+0x0/0x2b returned 0 after 5 usecs
[ 0.675632] calling ext4_init_fs+0x0/0x1be @ 1
[ 0.675658] Freeing initrd memory: 5836K
[ 0.675755] initcall ext4_init_fs+0x0/0x1be returned 0 after 118 usecs
[ 0.675758] calling journal_init+0x0/0x129 @ 1
[ 0.675790] initcall journal_init+0x0/0x129 returned 0 after 29 usecs
[ 0.675792] calling init_squashfs_fs+0x0/0x77 @ 1
[ 0.675802] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.675933] initcall init_squashfs_fs+0x0/0x77 returned 0 after 136 usecs
[ 0.675935] calling init_fat_fs+0x0/0x56 @ 1
[ 0.675951] initcall init_fat_fs+0x0/0x56 returned 0 after 13 usecs
[ 0.675953] calling init_vfat_fs+0x0/0x15 @ 1
[ 0.675955] initcall init_vfat_fs+0x0/0x15 returned 0 after 0 usecs
[ 0.675957] calling init_nls_cp437+0x0/0x19 @ 1
[ 0.675959] initcall init_nls_cp437+0x0/0x19 returned 0 after 0 usecs
[ 0.675961] calling init_nls_ascii+0x0/0x19 @ 1
[ 0.675963] initcall init_nls_ascii+0x0/0x19 returned 0 after 0 usecs
[ 0.675965] calling init_nls_iso8859_1+0x0/0x19 @ 1
[ 0.675966] initcall init_nls_iso8859_1+0x0/0x19 returned 0 after 0 usecs
[ 0.675968] calling init_nls_utf8+0x0/0x2c @ 1
[ 0.675970] initcall init_nls_utf8+0x0/0x2c returned 0 after 0 usecs
[ 0.675972] calling init_autofs_fs+0x0/0x29 @ 1
[ 0.676005] initcall init_autofs_fs+0x0/0x29 returned 0 after 30 usecs
[ 0.676007] calling fuse_init+0x0/0x13f @ 1
[ 0.676009] fuse: init (API version 7.36)
[ 0.676135] initcall fuse_init+0x0/0x13f returned 0 after 123 usecs
[ 0.676137] calling init_xfs_fs+0x0/0x1bd @ 1
[ 0.676139] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.676522] initcall init_xfs_fs+0x0/0x1bd returned 0 after 374 usecs
[ 0.676525] calling init_f2fs_fs+0x0/0x189 @ 1
[ 0.676604] initcall init_f2fs_fs+0x0/0x189 returned 0 after 75 usecs
[ 0.676607] calling efivarfs_init+0x0/0x29 @ 1
[ 0.676610] initcall efivarfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.676612] calling ipc_init+0x0/0x2a @ 1
[ 0.676617] initcall ipc_init+0x0/0x2a returned 0 after 3 usecs
[ 0.676619] calling ipc_sysctl_init+0x0/0x17 @ 1
[ 0.676628] initcall ipc_sysctl_init+0x0/0x17 returned 0 after 6 usecs
[ 0.676630] calling init_mqueue_fs+0x0/0xa7 @ 1
[ 0.676655] initcall init_mqueue_fs+0x0/0xa7 returned 0 after 22 usecs
[ 0.676658] calling key_proc_init+0x0/0x73 @ 1
[ 0.676661] initcall key_proc_init+0x0/0x73 returned 0 after 1 usecs
[ 0.676663] calling aes_init+0x0/0x15 @ 1
[ 0.676675] initcall aes_init+0x0/0x15 returned 0 after 9 usecs
[ 0.676677] calling jent_mod_init+0x0/0x35 @ 1
[ 0.685145] initcall jent_mod_init+0x0/0x35 returned 0 after 8267 usecs
[ 0.685149] calling af_alg_init+0x0/0x41 @ 1
[ 0.685152] NET: Registered PF_ALG protocol family
[ 0.685262] initcall af_alg_init+0x0/0x41 returned 0 after 108 usecs
[ 0.685265] calling algif_hash_init+0x0/0x15 @ 1
[ 0.685267] initcall algif_hash_init+0x0/0x15 returned 0 after 0 usecs
[ 0.685270] calling algif_skcipher_init+0x0/0x15 @ 1
[ 0.685273] initcall algif_skcipher_init+0x0/0x15 returned 0 after 0 usecs
[ 0.685275] calling calibrate_xor_blocks+0x0/0x12c @ 1
[ 0.685278] xor: automatically using best checksumming function avx
[ 0.685434] initcall calibrate_xor_blocks+0x0/0x12c returned 0 after 153 usecs
[ 0.685437] calling asymmetric_key_init+0x0/0x15 @ 1
[ 0.685440] Key type asymmetric registered
[ 0.685533] initcall asymmetric_key_init+0x0/0x15 returned 0 after 91 usecs
[ 0.685536] calling x509_key_init+0x0/0x15 @ 1
[ 0.685539] Asymmetric key parser 'x509' registered
[ 0.685649] initcall x509_key_init+0x0/0x15 returned 0 after 108 usecs
[ 0.685651] calling crypto_kdf108_init+0x0/0x38 @ 1
[ 0.685830] alg: self-tests disabled
[ 0.685948] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.686079] initcall crypto_kdf108_init+0x0/0x38 returned 0 after 414 usecs
[ 0.686082] calling blkdev_init+0x0/0x2a @ 1
[ 0.686087] initcall blkdev_init+0x0/0x2a returned 0 after 3 usecs
[ 0.686090] calling proc_genhd_init+0x0/0x51 @ 1
[ 0.686094] initcall proc_genhd_init+0x0/0x51 returned 0 after 1 usecs
[ 0.686097] calling bsg_init+0x0/0x86 @ 1
[ 0.686104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.686277] initcall bsg_init+0x0/0x86 returned 0 after 174 usecs
[ 0.686281] calling throtl_init+0x0/0x44 @ 1
[ 0.686315] initcall throtl_init+0x0/0x44 returned 0 after 30 usecs
[ 0.686320] calling deadline_init+0x0/0x15 @ 1
[ 0.686323] io scheduler mq-deadline registered
[ 0.686427] initcall deadline_init+0x0/0x15 returned 0 after 102 usecs
[ 0.686430] calling kyber_init+0x0/0x15 @ 1
[ 0.686433] io scheduler kyber registered
[ 0.686525] initcall kyber_init+0x0/0x15 returned 0 after 90 usecs
[ 0.686528] calling bfq_init+0x0/0x91 @ 1
[ 0.686538] io scheduler bfq registered
[ 0.686626] initcall bfq_init+0x0/0x91 returned 0 after 93 usecs
[ 0.686629] calling blake2s_mod_init+0x0/0x1d @ 1
[ 0.686932] initcall blake2s_mod_init+0x0/0x1d returned 0 after 294 usecs
[ 0.686935] calling btree_module_init+0x0/0x36 @ 1
[ 0.686938] initcall btree_module_init+0x0/0x36 returned 0 after 1 usecs
[ 0.686939] calling crc_t10dif_mod_init+0x0/0x54 @ 1
[ 0.686982] initcall crc_t10dif_mod_init+0x0/0x54 returned 0 after 40 usecs
[ 0.686984] calling libcrc32c_mod_init+0x0/0x2f @ 1
[ 0.687020] initcall libcrc32c_mod_init+0x0/0x2f returned 0 after 33 usecs
[ 0.687022] calling percpu_counter_startup+0x0/0x65 @ 1
[ 0.687055] initcall percpu_counter_startup+0x0/0x65 returned 0 after 30 usecs
[ 0.687057] calling sg_pool_init+0x0/0xc1 @ 1
[ 0.687068] initcall sg_pool_init+0x0/0xc1 returned 0 after 9 usecs
[ 0.687069] calling phy_core_init+0x0/0x52 @ 1
[ 0.687074] initcall phy_core_init+0x0/0x52 returned 0 after 2 usecs
[ 0.687075] calling crystalcove_pwm_driver_init+0x0/0x19 @ 1
[ 0.687086] initcall crystalcove_pwm_driver_init+0x0/0x19 returned 0 after 8 usecs
[ 0.687088] calling pcie_portdrv_init+0x0/0x53 @ 1
[ 0.687238] pcieport 0000:00:01.0: PME: Signaling with IRQ 26
[ 0.687520] pcieport 0000:00:1c.0: PME: Signaling with IRQ 27
[ 0.687776] pcieport 0000:00:1c.6: PME: Signaling with IRQ 28
[ 0.687975] initcall pcie_portdrv_init+0x0/0x53 returned 0 after 864 usecs
[ 0.687978] calling pci_proc_init+0x0/0x78 @ 1
[ 0.687990] initcall pci_proc_init+0x0/0x78 returned 0 after 10 usecs
[ 0.687992] calling pci_hotplug_init+0x0/0x4 @ 1
[ 0.687994] initcall pci_hotplug_init+0x0/0x4 returned 0 after 0 usecs
[ 0.687996] calling shpcd_init+0x0/0x62 @ 1
[ 0.688005] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.688153] initcall shpcd_init+0x0/0x62 returned 0 after 151 usecs
[ 0.688155] calling pci_stub_init+0x0/0x135 @ 1
[ 0.688162] initcall pci_stub_init+0x0/0x135 returned 0 after 5 usecs
[ 0.688164] calling pci_ep_cfs_init+0x0/0xd5 @ 1
[ 0.688184] initcall pci_ep_cfs_init+0x0/0xd5 returned 0 after 17 usecs
[ 0.688186] calling pci_epc_init+0x0/0x49 @ 1
[ 0.688191] initcall pci_epc_init+0x0/0x49 returned 0 after 2 usecs
[ 0.688193] calling pci_epf_init+0x0/0x2f @ 1
[ 0.688198] initcall pci_epf_init+0x0/0x2f returned 0 after 3 usecs
[ 0.688200] calling vmd_drv_init+0x0/0x22 @ 1
[ 0.688208] initcall vmd_drv_init+0x0/0x22 returned 0 after 6 usecs
[ 0.688210] calling dw_plat_pcie_driver_init+0x0/0x19 @ 1
[ 0.688214] initcall dw_plat_pcie_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.688216] calling meson_pcie_driver_init+0x0/0x19 @ 1
[ 0.688221] initcall meson_pcie_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.688223] calling efifb_driver_init+0x0/0x19 @ 1
[ 0.688228] initcall efifb_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.688230] calling simplefb_driver_init+0x0/0x19 @ 1
[ 0.688234] initcall simplefb_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.688236] calling intel_idle_init+0x0/0x294 @ 1
[ 0.688502] initcall intel_idle_init+0x0/0x294 returned 0 after 257 usecs
[ 0.688505] calling ged_driver_init+0x0/0x19 @ 1
[ 0.688515] initcall ged_driver_init+0x0/0x19 returned 0 after 6 usecs
[ 0.688518] calling acpi_button_driver_init+0x0/0x56 @ 1
[ 0.688571] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.688778] ACPI: button: Power Button [PWRB]
[ 0.688903] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.689090] ACPI: button: Power Button [PWRF]
[ 0.689207] initcall acpi_button_driver_init+0x0/0x56 returned 0 after 670 usecs
[ 0.689210] calling acpi_fan_driver_init+0x0/0x19 @ 1
[ 0.689217] initcall acpi_fan_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.689219] calling acpi_video_init+0x0/0x8e @ 1
[ 0.689224] initcall acpi_video_init+0x0/0x8e returned 0 after 2 usecs
[ 0.689226] calling acpi_tad_driver_init+0x0/0x19 @ 1
[ 0.689231] initcall acpi_tad_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.689234] calling acpi_processor_driver_init+0x0/0xbd @ 1
[ 0.690258] initcall acpi_processor_driver_init+0x0/0xbd returned 0 after 997 usecs
[ 0.690262] calling hmat_init+0x0/0x287 @ 1
[ 0.690265] initcall hmat_init+0x0/0x287 returned 0 after 0 usecs
[ 0.690268] calling acpi_hed_driver_init+0x0/0x15 @ 1
[ 0.690278] initcall acpi_hed_driver_init+0x0/0x15 returned 0 after 7 usecs
[ 0.690281] calling bgrt_init+0x0/0xbe @ 1
[ 0.690284] initcall bgrt_init+0x0/0xbe returned -19 after 0 usecs
[ 0.690286] calling acpi_pfru_driver_init+0x0/0x19 @ 1
[ 0.690293] initcall acpi_pfru_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.690296] calling acpi_pfrt_log_driver_init+0x0/0x19 @ 1
[ 0.690301] initcall acpi_pfrt_log_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.690304] calling acpi_pad_init+0x0/0xaf @ 1
[ 0.690313] initcall acpi_pad_init+0x0/0xaf returned 0 after 6 usecs
[ 0.690316] calling erst_init+0x0/0x2be @ 1
[ 0.690317] initcall erst_init+0x0/0x2be returned 0 after 0 usecs
[ 0.690319] calling ghes_init+0x0/0xe6 @ 1
[ 0.690320] initcall ghes_init+0x0/0xe6 returned -19 after 0 usecs
[ 0.690322] calling gpio_clk_driver_init+0x0/0x19 @ 1
[ 0.690327] initcall gpio_clk_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.690328] calling plt_clk_driver_init+0x0/0x19 @ 1
[ 0.690333] initcall plt_clk_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.690334] calling fch_clk_driver_init+0x0/0x19 @ 1
[ 0.690338] initcall fch_clk_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.690339] calling ioat_init_module+0x0/0xbd @ 1
[ 0.690341] ioatdma: Intel(R) QuickData Technology Driver 5.00
[ 0.690486] initcall ioat_init_module+0x0/0xbd returned 0 after 141 usecs
[ 0.690488] calling idxd_init_module+0x0/0xe3 @ 1
[ 0.690489] idxd driver failed to load without MOVDIR64B.
[ 0.690610] initcall idxd_init_module+0x0/0xe3 returned -19 after 117 usecs
[ 0.690611] calling dsa_bus_init+0x0/0x15 @ 1
[ 0.690616] initcall dsa_bus_init+0x0/0x15 returned 0 after 3 usecs
[ 0.690618] calling intel_ldma_init+0x0/0x19 @ 1
[ 0.690622] initcall intel_ldma_init+0x0/0x19 returned 0 after 2 usecs
[ 0.690624] calling virtio_pci_driver_init+0x0/0x22 @ 1
[ 0.690631] initcall virtio_pci_driver_init+0x0/0x22 returned 0 after 5 usecs
[ 0.690633] calling n_null_init+0x0/0x1d @ 1
[ 0.690635] initcall n_null_init+0x0/0x1d returned 0 after 0 usecs
[ 0.690636] calling pty_init+0x0/0xe @ 1
[ 0.690715] initcall pty_init+0x0/0xe returned 0 after 75 usecs
[ 0.690717] calling sysrq_init+0x0/0x53 @ 1
[ 0.690720] initcall sysrq_init+0x0/0x53 returned 0 after 1 usecs
[ 0.690722] calling serial8250_init+0x0/0x163 @ 1
[ 0.690724] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.691202] initcall serial8250_init+0x0/0x163 returned 0 after 467 usecs
[ 0.691205] calling serial_pci_driver_init+0x0/0x22 @ 1
[ 0.691220] initcall serial_pci_driver_init+0x0/0x22 returned 0 after 13 usecs
[ 0.691222] calling random_sysctls_init+0x0/0x29 @ 1
[ 0.691227] initcall random_sysctls_init+0x0/0x29 returned 0 after 2 usecs
[ 0.691229] calling ttyprintk_init+0x0/0xf3 @ 1
[ 0.691303] initcall ttyprintk_init+0x0/0xf3 returned 0 after 70 usecs
[ 0.691307] calling virtio_console_init+0x0/0xf6 @ 1
[ 0.691322] initcall virtio_console_init+0x0/0xf6 returned 0 after 12 usecs
[ 0.691325] calling hpet_init+0x0/0x71 @ 1
[ 0.691469] initcall hpet_init+0x0/0x71 returned 0 after 139 usecs
[ 0.691472] calling hwrng_modinit+0x0/0x92 @ 1
[ 0.691510] initcall hwrng_modinit+0x0/0x92 returned 0 after 35 usecs
[ 0.691512] calling intel_rng_mod_init+0x0/0x1e1 @ 1
[ 0.691529] initcall intel_rng_mod_init+0x0/0x1e1 returned -19 after 14 usecs
[ 0.691531] calling amd_rng_mod_init+0x0/0x191 @ 1
[ 0.691535] initcall amd_rng_mod_init+0x0/0x191 returned -19 after 1 usecs
[ 0.691536] calling virtio_rng_driver_init+0x0/0x15 @ 1
[ 0.691541] initcall virtio_rng_driver_init+0x0/0x15 returned 0 after 2 usecs
[ 0.691543] calling cn_proc_init+0x0/0x3d @ 1
[ 0.691547] initcall cn_proc_init+0x0/0x3d returned 0 after 0 usecs
[ 0.691549] calling topology_sysfs_init+0x0/0x3c @ 1
[ 0.691586] initcall topology_sysfs_init+0x0/0x3c returned 0 after 34 usecs
[ 0.691589] calling cacheinfo_sysfs_init+0x0/0x3c @ 1
[ 0.692021] initcall cacheinfo_sysfs_init+0x0/0x3c returned 0 after 419 usecs
[ 0.692024] calling devcoredump_init+0x0/0x1e @ 1
[ 0.692029] initcall devcoredump_init+0x0/0x1e returned 0 after 3 usecs
[ 0.692032] calling loop_init+0x0/0xf5 @ 1
[ 0.692902] loop: module loaded
[ 0.692979] initcall loop_init+0x0/0xf5 returned 0 after 922 usecs
[ 0.692983] calling init+0x0/0x7e @ 1
[ 0.692991] initcall init+0x0/0x7e returned 0 after 5 usecs
[ 0.692993] calling rtsx_pci_driver_init+0x0/0x22 @ 1
[ 0.693004] initcall rtsx_pci_driver_init+0x0/0x22 returned 0 after 8 usecs
[ 0.693007] calling intel_soc_pmic_i2c_driver_init+0x0/0x19 @ 1
[ 0.693013] initcall intel_soc_pmic_i2c_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.693015] calling cht_wc_driver_init+0x0/0x19 @ 1
[ 0.693020] initcall cht_wc_driver_init+0x0/0x19 returned 0 after 2 usecs
[ 0.693022] calling dax_init+0x0/0x22 @ 1
[ 0.693029] initcall dax_init+0x0/0x22 returned 0 after 4 usecs
[ 0.693031] calling dax_hmem_driver_init+0x0/0x19 @ 1
[ 0.693037] initcall dax_hmem_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.693039] calling udmabuf_dev_init+0x0/0x15 @ 1
[ 0.693059] initcall udmabuf_dev_init+0x0/0x15 returned 0 after 17 usecs
[ 0.693062] calling raid_init+0x0/0x15 @ 1
[ 0.693066] initcall raid_init+0x0/0x15 returned 0 after 2 usecs
[ 0.693068] calling spi_transport_init+0x0/0x85 @ 1
[ 0.693075] initcall spi_transport_init+0x0/0x85 returned 0 after 4 usecs
[ 0.693078] calling fc_transport_init+0x0/0x81 @ 1
[ 0.693085] initcall fc_transport_init+0x0/0x81 returned 0 after 5 usecs
[ 0.693087] calling sas_transport_init+0x0/0xb9 @ 1
[ 0.693097] initcall sas_transport_init+0x0/0xb9 returned 0 after 7 usecs
[ 0.693100] calling sas_class_init+0x0/0x7f @ 1
[ 0.693104] initcall sas_class_init+0x0/0x7f returned 0 after 2 usecs
[ 0.693106] calling libfc_init+0x0/0x36 @ 1
[ 0.693197] initcall libfc_init+0x0/0x36 returned 0 after 86 usecs
[ 0.693201] calling blogic_init+0x0/0x5f4 @ 1
[ 0.693208] initcall blogic_init+0x0/0x5f4 returned 0 after 4 usecs
[ 0.693211] calling isci_init+0x0/0x6f @ 1
[ 0.693213] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 0.693367] initcall isci_init+0x0/0x6f returned 0 after 150 usecs
[ 0.693370] calling hpsa_init+0x0/0x55 @ 1
[ 0.693380] initcall hpsa_init+0x0/0x55 returned 0 after 7 usecs
[ 0.693383] calling pqi_init+0x0/0xe2 @ 1
[ 0.693385] Microchip SmartPQI Driver (v2.1.12-055)
[ 0.693503] initcall pqi_init+0x0/0xe2 returned 0 after 115 usecs
[ 0.693506] calling megasas_init+0x0/0x278 @ 1
[ 0.693508] megasas: 07.719.03.00-rc1
[ 0.693605] initcall megasas_init+0x0/0x278 returned 0 after 94 usecs
[ 0.693608] calling _mpt3sas_init+0x0/0x1a9 @ 1
[ 0.693610] mpt3sas version 40.100.00.00 loaded
[ 0.693787] initcall _mpt3sas_init+0x0/0x1a9 returned 0 after 172 usecs
[ 0.693790] calling init+0x0/0xc5 @ 1
[ 0.693801] initcall init+0x0/0xc5 returned 0 after 8 usecs
[ 0.693804] calling pvscsi_init+0x0/0x3c @ 1
[ 0.693806] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.693925] initcall pvscsi_init+0x0/0x3c returned 0 after 115 usecs
[ 0.693927] calling storvsc_drv_init+0x0/0x74 @ 1
[ 0.693931] hv_vmbus: registering driver hv_storvsc
[ 0.694041] initcall storvsc_drv_init+0x0/0x74 returned -19 after 108 usecs
[ 0.694044] calling init_sd+0x0/0x19a @ 1
[ 0.694055] initcall init_sd+0x0/0x19a returned 0 after 8 usecs
[ 0.694058] calling init_sg+0x0/0xf1 @ 1
[ 0.694062] initcall init_sg+0x0/0xf1 returned 0 after 2 usecs
[ 0.694064] calling nvme_core_init+0x0/0x1b1 @ 1
[ 0.694185] initcall nvme_core_init+0x0/0x1b1 returned 0 after 114 usecs
[ 0.694188] calling nvme_init+0x0/0x22 @ 1
[ 0.694199] initcall nvme_init+0x0/0x22 returned 0 after 8 usecs
[ 0.694202] calling ahci_pci_driver_init+0x0/0x22 @ 1
[ 0.694216] ahci 0000:00:1f.2: version 3.0
[ 0.694358] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.694543] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.698665] scsi host0: ahci
[ 0.698901] scsi host1: ahci
[ 0.699036] scsi host2: ahci
[ 0.699172] scsi host3: ahci
[ 0.699373] scsi host4: ahci
[ 0.699508] scsi host5: ahci
[ 0.699605] ata1: SATA max UDMA/133 abar m2048@0xfe701000 port 0xfe701100 irq 29
[ 0.699773] ata2: SATA max UDMA/133 abar m2048@0xfe701000 port 0xfe701180 irq 29
[ 0.699938] ata3: DUMMY
[ 0.699996] ata4: DUMMY
[ 0.700053] ata5: DUMMY
[ 0.700110] ata6: DUMMY
[ 0.700191] initcall ahci_pci_driver_init+0x0/0x22 returned 0 after 5846 usecs
[ 0.700196] calling ahci_driver_init+0x0/0x19 @ 1
[ 0.700207] initcall ahci_driver_init+0x0/0x19 returned 0 after 6 usecs
[ 0.700211] calling piix_init+0x0/0x2e @ 1
[ 0.700225] initcall piix_init+0x0/0x2e returned 0 after 10 usecs
[ 0.700228] calling sch_pci_driver_init+0x0/0x22 @ 1
[ 0.700236] initcall sch_pci_driver_init+0x0/0x22 returned 0 after 6 usecs
[ 0.700240] calling mpiix_pci_driver_init+0x0/0x22 @ 1
[ 0.700252] initcall mpiix_pci_driver_init+0x0/0x22 returned 0 after 8 usecs
[ 0.700256] calling ata_generic_pci_driver_init+0x0/0x22 @ 1
[ 0.700268] initcall ata_generic_pci_driver_init+0x0/0x22 returned 0 after 8 usecs
[ 0.700273] calling drm_kms_helper_init+0x0/0xc @ 1
[ 0.700279] initcall drm_kms_helper_init+0x0/0xc returned 0 after 3 usecs
[ 0.700282] calling drm_core_init+0x0/0xbb @ 1
[ 0.700346] ACPI: bus type drm_connector registered
[ 0.700704] initcall drm_core_init+0x0/0xbb returned 0 after 409 usecs
[ 0.700708] calling i915_init+0x0/0x92 @ 1
[ 0.700860] Stack Depot allocating hash table with kvmalloc
[ 0.702253] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 0.719756] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 0.720037] i915 0000:00:02.0: [drm] DRM_I915_DEBUG_RUNTIME_PM enabled
[ 0.720230] initcall i915_init+0x0/0x92 returned 0 after 19061 usecs
[ 0.720237] calling kvmgt_init+0x0/0x1b @ 1
[ 0.720240] initcall kvmgt_init+0x0/0x1b returned -19 after 0 usecs
[ 0.720243] calling virtio_gpu_driver_init+0x0/0x15 @ 1
[ 0.720250] initcall virtio_gpu_driver_init+0x0/0x15 returned 0 after 3 usecs
[ 0.720252] calling bochs_init+0x0/0x47 @ 1
[ 0.720265] initcall bochs_init+0x0/0x47 returned 0 after 9 usecs
[ 0.720268] calling cirrus_init+0x0/0x32 @ 1
[ 0.720276] initcall cirrus_init+0x0/0x32 returned 0 after 5 usecs
[ 0.720279] calling macvlan_init_module+0x0/0x7a @ 1
[ 0.720284] initcall macvlan_init_module+0x0/0x7a returned 0 after 2 usecs
[ 0.720285] calling macvtap_init+0x0/0xc0 @ 1
[ 0.720293] initcall macvtap_init+0x0/0xc0 returned 0 after 4 usecs
[ 0.720294] calling blackhole_netdev_init+0x0/0x88 @ 1
[ 0.720303] initcall blackhole_netdev_init+0x0/0x88 returned 0 after 7 usecs
[ 0.720305] calling tun_init+0x0/0xa6 @ 1
[ 0.720306] tun: Universal TUN/TAP device driver, 1.6
[ 0.720501] initcall tun_init+0x0/0xa6 returned 0 after 190 usecs
[ 0.720503] calling pcnet32_init_module+0x0/0x112 @ 1
[ 0.720512] initcall pcnet32_init_module+0x0/0x112 returned 0 after 7 usecs
[ 0.720513] calling e100_init_module+0x0/0x5b @ 1
[ 0.720515] e100: Intel(R) PRO/100 Network Driver
[ 0.720621] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.720752] initcall e100_init_module+0x0/0x5b returned 0 after 231 usecs
[ 0.720753] calling fjes_init_module+0x0/0xaf @ 1
[ 0.720798] initcall fjes_init_module+0x0/0xaf returned -19 after 42 usecs
[ 0.720800] calling fusion_init+0x0/0x114 @ 1
[ 0.720801] Fusion MPT base driver 3.04.20
[ 0.720895] Copyright (c) 1999-2008 LSI Corporation
[ 0.721007] initcall fusion_init+0x0/0x114 returned 0 after 201 usecs
[ 0.721009] calling mptspi_init+0x0/0xf3 @ 1
[ 0.721010] Fusion MPT SPI Host driver 3.04.20
[ 0.721117] initcall mptspi_init+0x0/0xf3 returned 0 after 104 usecs
[ 0.721119] calling mptsas_init+0x0/0x12f @ 1
[ 0.721120] Fusion MPT SAS Host driver 3.04.20
[ 0.721236] initcall mptsas_init+0x0/0x12f returned 0 after 112 usecs
[ 0.721237] calling vfio_init+0x0/0x12f @ 1
[ 0.721291] VFIO - User Level meta-driver version: 0.3
[ 0.721409] initcall vfio_init+0x0/0x12f returned 0 after 166 usecs
[ 0.721411] calling vfio_iommu_type1_init+0x0/0x15 @ 1
[ 0.721412] initcall vfio_iommu_type1_init+0x0/0x15 returned 0 after 0 usecs
[ 0.721414] calling ehci_hcd_init+0x0/0x107 @ 1
[ 0.721415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.721562] initcall ehci_hcd_init+0x0/0x107 returned 0 after 143 usecs
[ 0.721563] calling ehci_pci_init+0x0/0x6e @ 1
[ 0.721565] ehci-pci: EHCI PCI platform driver
[ 0.721752] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.721876] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.722051] ehci-pci 0000:00:1a.0: debug port 2
[ 0.726076] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe703000
[ 0.733212] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.733419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 0.733606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.733777] usb usb1: Product: EHCI Host Controller
[ 0.733887] usb usb1: Manufacturer: Linux 5.17.11-1148.native ehci_hcd
[ 0.734041] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.734295] hub 1-0:1.0: USB hub found
[ 0.734392] hub 1-0:1.0: 2 ports detected
[ 0.734653] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.734775] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.734975] ehci-pci 0000:00:1d.0: debug port 2
[ 0.738986] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe702000
[ 0.745208] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.745415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 0.745601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.745761] usb usb2: Product: EHCI Host Controller
[ 0.745883] usb usb2: Manufacturer: Linux 5.17.11-1148.native ehci_hcd
[ 0.746031] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.746257] hub 2-0:1.0: USB hub found
[ 0.746350] hub 2-0:1.0: 2 ports detected
[ 0.746536] initcall ehci_pci_init+0x0/0x6e returned 0 after 24385 usecs
[ 0.746539] calling ohci_hcd_mod_init+0x0/0x84 @ 1
[ 0.746541] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.746699] initcall ohci_hcd_mod_init+0x0/0x84 returned 0 after 154 usecs
[ 0.746701] calling ohci_pci_init+0x0/0x6e @ 1
[ 0.746702] ohci-pci: OHCI PCI platform driver
[ 0.746810] initcall ohci_pci_init+0x0/0x6e returned 0 after 105 usecs
[ 0.746812] calling uhci_hcd_init+0x0/0x123 @ 1
[ 0.746814] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.746968] initcall uhci_hcd_init+0x0/0x123 returned 0 after 151 usecs
[ 0.746970] calling xhci_hcd_init+0x0/0x20 @ 1
[ 0.746973] initcall xhci_hcd_init+0x0/0x20 returned 0 after 1 usecs
[ 0.746974] calling xhci_pci_init+0x0/0x56 @ 1
[ 0.747033] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.747156] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.747459] xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[ 0.747940] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.17
[ 0.748136] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.748309] usb usb3: Product: xHCI Host Controller
[ 0.748420] usb usb3: Manufacturer: Linux 5.17.11-1148.native xhci-hcd
[ 0.748574] usb usb3: SerialNumber: 0000:03:00.0
[ 0.748819] hub 3-0:1.0: USB hub found
[ 0.748933] hub 3-0:1.0: 2 ports detected
[ 0.749121] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.749249] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.749425] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[ 0.750907] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.751101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.17
[ 0.751304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.751468] usb usb4: Product: xHCI Host Controller
[ 0.751588] usb usb4: Manufacturer: Linux 5.17.11-1148.native xhci-hcd
[ 0.751734] usb usb4: SerialNumber: 0000:03:00.0
[ 0.752003] hub 4-0:1.0: USB hub found
[ 0.752102] hub 4-0:1.0: 2 ports detected
[ 0.752283] initcall xhci_pci_init+0x0/0x56 returned 0 after 5183 usecs
[ 0.752287] calling xhci_plat_init+0x0/0x2c @ 1
[ 0.752296] initcall xhci_plat_init+0x0/0x2c returned 0 after 7 usecs
[ 0.752298] calling uas_init+0x0/0x56 @ 1
[ 0.752388] usbcore: registered new interface driver uas
[ 0.752514] initcall uas_init+0x0/0x56 returned 0 after 209 usecs
[ 0.752517] calling usb_storage_driver_init+0x0/0x37 @ 1
[ 0.752532] usbcore: registered new interface driver usb-storage
[ 0.752675] initcall usb_storage_driver_init+0x0/0x37 returned 0 after 152 usecs
[ 0.752676] calling realtek_cr_driver_init+0x0/0x37 @ 1
[ 0.752683] usbcore: registered new interface driver ums-realtek
[ 0.752818] initcall realtek_cr_driver_init+0x0/0x37 returned 0 after 136 usecs
[ 0.752820] calling evdev_init+0x0/0x15 @ 1
[ 0.752917] initcall evdev_init+0x0/0x15 returned 0 after 92 usecs
[ 0.752921] calling uinput_misc_init+0x0/0x15 @ 1
[ 0.752941] initcall uinput_misc_init+0x0/0x15 returned 0 after 17 usecs
[ 0.752944] calling rmi_bus_init+0x0/0xc4 @ 1
[ 0.752975] initcall rmi_bus_init+0x0/0xc4 returned 0 after 29 usecs
[ 0.752977] calling cmos_init+0x0/0x7b @ 1
[ 0.753000] rtc_cmos 00:02: RTC can wake from S4
[ 0.753362] rtc_cmos 00:02: registered as rtc0
[ 0.753481] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753662] initcall cmos_init+0x0/0x7b returned 0 after 666 usecs
[ 0.753664] calling acpi_smbus_cmi_driver_init+0x0/0x15 @ 1
[ 0.753674] initcall acpi_smbus_cmi_driver_init+0x0/0x15 returned 0 after 8 usecs
[ 0.753676] calling dw_i2c_driver_init+0x0/0x22 @ 1
[ 0.753685] initcall dw_i2c_driver_init+0x0/0x22 returned 0 after 6 usecs
[ 0.753687] calling coretemp_init+0x0/0xec @ 1
[ 0.753900] initcall coretemp_init+0x0/0xec returned 0 after 206 usecs
[ 0.753903] calling powerclamp_init+0x0/0x206 @ 1
[ 0.753924] initcall powerclamp_init+0x0/0x206 returned 0 after 19 usecs
[ 0.753926] calling pkg_temp_thermal_init+0x0/0x12c @ 1
[ 0.754019] initcall pkg_temp_thermal_init+0x0/0x12c returned 0 after 88 usecs
[ 0.754021] calling thermal_throttle_init_device+0x0/0x5d @ 1
[ 0.754077] initcall thermal_throttle_init_device+0x0/0x5d returned 0 after 52 usecs
[ 0.754079] calling raid0_init+0x0/0x15 @ 1
[ 0.754081] initcall raid0_init+0x0/0x15 returned 0 after 0 usecs
[ 0.754083] calling raid_init+0x0/0x15 @ 1
[ 0.754084] initcall raid_init+0x0/0x15 returned 0 after 0 usecs
[ 0.754086] calling raid_init+0x0/0x15 @ 1
[ 0.754088] initcall raid_init+0x0/0x15 returned 0 after 0 usecs
[ 0.754089] calling dm_init+0x0/0x42 @ 1
[ 0.754133] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[ 0.754341] initcall dm_init+0x0/0x42 returned 0 after 244 usecs
[ 0.754343] calling dm_crypt_init+0x0/0x2f @ 1
[ 0.754345] initcall dm_crypt_init+0x0/0x2f returned 0 after 0 usecs
[ 0.754347] calling amd_pstate_init+0x0/0x133 @ 1
[ 0.754349] initcall amd_pstate_init+0x0/0x133 returned -19 after 0 usecs
[ 0.754351] calling intel_pstate_init+0x0/0x3f3 @ 1
[ 0.754356] intel_pstate: Intel P-state driver initializing
[ 0.754744] initcall intel_pstate_init+0x0/0x3f3 returned 0 after 382 usecs
[ 0.754747] calling mmc_blk_init+0x0/0xef @ 1
[ 0.754757] initcall mmc_blk_init+0x0/0xef returned 0 after 8 usecs
[ 0.754759] calling sdhci_drv_init+0x0/0x23 @ 1
[ 0.754761] sdhci: Secure Digital Host Controller Interface driver
[ 0.754908] sdhci: Copyright(c) Pierre Ossman
[ 0.755020] initcall sdhci_drv_init+0x0/0x23 returned 0 after 252 usecs
[ 0.755022] calling sdhci_driver_init+0x0/0x22 @ 1
[ 0.755031] initcall sdhci_driver_init+0x0/0x22 returned 0 after 8 usecs
[ 0.755033] calling sdhci_acpi_driver_init+0x0/0x19 @ 1
[ 0.755040] initcall sdhci_acpi_driver_init+0x0/0x19 returned 0 after 4 usecs
[ 0.755042] calling rtsx_pci_sdmmc_driver_init+0x0/0x19 @ 1
[ 0.755048] initcall rtsx_pci_sdmmc_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.755050] calling dmi_sysfs_init+0x0/0xac @ 1
[ 0.755251] initcall dmi_sysfs_init+0x0/0xac returned 0 after 195 usecs
[ 0.755254] calling ibft_init+0x0/0x23b @ 1
[ 0.755257] No iBFT detected.
[ 0.755341] initcall ibft_init+0x0/0x23b returned 0 after 83 usecs
[ 0.755343] calling sysfb_init+0x0/0xbc @ 1
[ 0.755365] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x1d5000 bytes
[ 0.755560] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
[ 0.756582] Console: switching to colour frame buffer device 100x37
[ 0.757482] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.757699] initcall sysfb_init+0x0/0xbc returned 0 after 2298 usecs
[ 0.757702] calling efivars_sysfs_init+0x0/0x40 @ 1
[ 0.757706] EFI Variables Facility v0.08 2004-May-17
[ 0.803865] initcall efivars_sysfs_init+0x0/0x40 returned 0 after 45076 usecs
[ 0.803869] calling esrt_sysfs_init+0x0/0x2f7 @ 1
[ 0.803872] initcall esrt_sysfs_init+0x0/0x2f7 returned -38 after 0 usecs
[ 0.803875] calling efivars_pstore_init+0x0/0xed @ 1
[ 0.846900] checking generic (d0000000 1d5000) vs hw (d0000000 10000000)
[ 0.846902] fb0: switching to i915drmfb from simple
[ 0.847415] Console: switching to colour dummy device 80x25
[ 0.847953] fbcon: i915drmfb (fb0) is primary device
[ 0.850200] pstore: Registered efi as persistent store backend
[ 0.850202] initcall efivars_pstore_init+0x0/0xed returned 0 after 45239 usecs
[ 0.850206] calling efibc_init+0x0/0x45 @ 1
[ 0.850209] initcall efibc_init+0x0/0x45 returned 0 after 0 usecs
[ 0.850211] calling efi_capsule_loader_init+0x0/0x3b @ 1
[ 0.850254] initcall efi_capsule_loader_init+0x0/0x3b returned 0 after 40 usecs
[ 0.850257] calling adf_register_ctl_device_driver+0x0/0x159 @ 1
[ 0.850455] initcall adf_register_ctl_device_driver+0x0/0x159 returned 0 after 191 usecs
[ 0.850458] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850553] initcall adfdrv_init+0x0/0x48 returned 0 after 90 usecs
[ 0.850556] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850601] initcall adfdrv_init+0x0/0x48 returned 0 after 42 usecs
[ 0.850606] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850647] initcall adfdrv_init+0x0/0x48 returned 0 after 38 usecs
[ 0.850649] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850686] initcall adfdrv_init+0x0/0x48 returned 0 after 34 usecs
[ 0.850689] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850725] initcall adfdrv_init+0x0/0x48 returned 0 after 33 usecs
[ 0.850727] calling adfdrv_init+0x0/0x48 @ 1
[ 0.850764] initcall adfdrv_init+0x0/0x48 returned 0 after 34 usecs
[ 0.850766] calling virtio_crypto_driver_init+0x0/0x15 @ 1
[ 0.850771] initcall virtio_crypto_driver_init+0x0/0x15 returned 0 after 2 usecs
[ 0.850774] calling hid_init+0x0/0x60 @ 1
[ 0.850781] hid: raw HID events driver (C) Jiri Kosina
[ 0.850784] initcall hid_init+0x0/0x60 returned 0 after 8 usecs
[ 0.850786] calling uhid_misc_init+0x0/0x15 @ 1
[ 0.850835] initcall uhid_misc_init+0x0/0x15 returned 0 after 45 usecs
[ 0.850837] calling hid_generic_init+0x0/0x22 @ 1
[ 0.850845] initcall hid_generic_init+0x0/0x22 returned 0 after 5 usecs
[ 0.850848] calling belkin_driver_init+0x0/0x22 @ 1
[ 0.850853] initcall belkin_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850855] calling ch_driver_init+0x0/0x22 @ 1
[ 0.850860] initcall ch_driver_init+0x0/0x22 returned 0 after 2 usecs
[ 0.850862] calling ch_driver_init+0x0/0x22 @ 1
[ 0.850867] initcall ch_driver_init+0x0/0x22 returned 0 after 2 usecs
[ 0.850869] calling holtek_kbd_driver_init+0x0/0x22 @ 1
[ 0.850875] initcall holtek_kbd_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850877] calling holtek_mouse_driver_init+0x0/0x22 @ 1
[ 0.850882] initcall holtek_mouse_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850885] calling holtek_driver_init+0x0/0x22 @ 1
[ 0.850892] initcall holtek_driver_init+0x0/0x22 returned 0 after 5 usecs
[ 0.850895] calling ks_driver_init+0x0/0x22 @ 1
[ 0.850900] initcall ks_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850902] calling lenovo_driver_init+0x0/0x22 @ 1
[ 0.850907] initcall lenovo_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850909] calling lg_driver_init+0x0/0x22 @ 1
[ 0.850916] initcall lg_driver_init+0x0/0x22 returned 0 after 4 usecs
[ 0.850918] calling lg_g15_driver_init+0x0/0x22 @ 1
[ 0.850924] initcall lg_g15_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850927] calling ms_driver_init+0x0/0x22 @ 1
[ 0.850932] initcall ms_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850934] calling samsung_driver_init+0x0/0x22 @ 1
[ 0.850939] initcall samsung_driver_init+0x0/0x22 returned 0 after 3 usecs
[ 0.850942] calling hid_init+0x0/0x60 @ 1
[ 0.850949] usbcore: registered new interface driver usbhid
[ 0.850950] usbhid: USB HID core driver
[ 0.850951] initcall hid_init+0x0/0x60 returned 0 after 7 usecs
[ 0.850953] calling vhost_net_init+0x0/0x40 @ 1
[ 0.850970] initcall vhost_net_init+0x0/0x40 returned 0 after 13 usecs
[ 0.850973] calling vhost_init+0x0/0x4 @ 1
[ 0.850975] initcall vhost_init+0x0/0x4 returned 0 after 0 usecs
[ 0.850977] calling ashmem_init+0x0/0xfc @ 1
[ 0.851007] ashmem: initialized
[ 0.851008] initcall ashmem_init+0x0/0xfc returned 0 after 27 usecs
[ 0.851010] calling isp_pci_driver_init+0x0/0x22 @ 1
[ 0.851018] initcall isp_pci_driver_init+0x0/0x22 returned 0 after 5 usecs
[ 0.851020] calling sar_driver_init+0x0/0x19 @ 1
[ 0.851027] initcall sar_driver_init+0x0/0x19 returned 0 after 3 usecs
[ 0.851029] calling intel_uncore_init+0x0/0x117 @ 1
[ 0.851031] initcall intel_uncore_init+0x0/0x117 returned -19 after 0 usecs
[ 0.851034] calling ips_pci_driver_init+0x0/0x22 @ 1
[ 0.851040] initcall ips_pci_driver_init+0x0/0x22 returned 0 after 4 usecs
[ 0.851043] calling intel_scu_pci_driver_init+0x0/0x22 @ 1
[ 0.851050] initcall intel_scu_pci_driver_init+0x0/0x22 returned 0 after 4 usecs
[ 0.851052] calling pmc_atom_init+0x0/0x4e @ 1
[ 0.851056] initcall pmc_atom_init+0x0/0x4e returned -19 after 1 usecs
[ 0.851058] calling extcon_class_init+0x0/0xc @ 1
[ 0.851062] initcall extcon_class_init+0x0/0xc returned 0 after 2 usecs
[ 0.851065] calling intel_rapl_msr_driver_init+0x0/0x19 @ 1
[ 0.851083] intel_rapl_common: Found RAPL domain package
[ 0.851084] intel_rapl_common: Found RAPL domain core
[ 0.851085] intel_rapl_common: Found RAPL domain uncore
[ 0.851091] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 0.851265] initcall intel_rapl_msr_driver_init+0x0/0x19 returned 0 after 192 usecs
[ 0.851268] calling binder_init+0x0/0x13f @ 1
[ 0.851280] initcall binder_init+0x0/0x13f returned 0 after 9 usecs
[ 0.851282] calling sock_diag_init+0x0/0x37 @ 1
[ 0.851292] initcall sock_diag_init+0x0/0x37 returned 0 after 7 usecs
[ 0.851294] calling init_net_drop_monitor+0x0/0xfe @ 1
[ 0.851295] drop_monitor: Initializing network drop monitor service
[ 0.851306] initcall init_net_drop_monitor+0x0/0xfe returned 0 after 10 usecs
[ 0.851308] calling llc_init+0x0/0x23 @ 1
[ 0.851309] initcall llc_init+0x0/0x23 returned 0 after 0 usecs
[ 0.851310] calling snap_init+0x0/0x3f @ 1
[ 0.851312] initcall snap_init+0x0/0x3f returned 0 after 0 usecs
[ 0.851313] calling blackhole_init+0x0/0x15 @ 1
[ 0.851315] initcall blackhole_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851316] calling cbq_module_init+0x0/0x15 @ 1
[ 0.851317] initcall cbq_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851319] calling multiq_module_init+0x0/0x15 @ 1
[ 0.851320] initcall multiq_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851321] calling codel_module_init+0x0/0x15 @ 1
[ 0.851323] initcall codel_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851324] calling fq_codel_module_init+0x0/0x15 @ 1
[ 0.851325] initcall fq_codel_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851327] calling cake_module_init+0x0/0x15 @ 1
[ 0.851328] initcall cake_module_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851329] calling fq_module_init+0x0/0x5d @ 1
[ 0.851332] initcall fq_module_init+0x0/0x5d returned 0 after 1 usecs
[ 0.851334] calling init_cgroup_cls+0x0/0x15 @ 1
[ 0.851335] initcall init_cgroup_cls+0x0/0x15 returned 0 after 0 usecs
[ 0.851336] calling cls_bpf_init_mod+0x0/0x15 @ 1
[ 0.851338] initcall cls_bpf_init_mod+0x0/0x15 returned 0 after 0 usecs
[ 0.851339] calling nfnetlink_init+0x0/0x66 @ 1
[ 0.851343] initcall nfnetlink_init+0x0/0x66 returned 0 after 2 usecs
[ 0.851344] calling nfnl_acct_init+0x0/0x5b @ 1
[ 0.851346] initcall nfnl_acct_init+0x0/0x5b returned 0 after 0 usecs
[ 0.851347] calling nfnetlink_queue_init+0x0/0xab @ 1
[ 0.851351] initcall nfnetlink_queue_init+0x0/0xab returned 0 after 2 usecs
[ 0.851353] calling nfnetlink_log_init+0x0/0x9f @ 1
[ 0.851355] initcall nfnetlink_log_init+0x0/0x9f returned 0 after 1 usecs
[ 0.851357] calling xt_init+0x0/0x118 @ 1
[ 0.851360] initcall xt_init+0x0/0x118 returned 0 after 1 usecs
[ 0.851361] calling tcpudp_mt_init+0x0/0x1c @ 1
[ 0.851363] initcall tcpudp_mt_init+0x0/0x1c returned 0 after 0 usecs
[ 0.851364] calling mark_mt_init+0x0/0x41 @ 1
[ 0.851366] initcall mark_mt_init+0x0/0x41 returned 0 after 0 usecs
[ 0.851367] calling ip_set_init+0x0/0x93 @ 1
[ 0.851370] initcall ip_set_init+0x0/0x93 returned 0 after 0 usecs
[ 0.851371] calling hash_ip_init+0x0/0x15 @ 1
[ 0.851373] initcall hash_ip_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851374] calling gre_offload_init+0x0/0x4e @ 1
[ 0.851376] initcall gre_offload_init+0x0/0x4e returned 0 after 0 usecs
[ 0.851378] calling bpfilter_sockopt_init+0x0/0x3d @ 1
[ 0.851379] initcall bpfilter_sockopt_init+0x0/0x3d returned 0 after 0 usecs
[ 0.851381] calling sysctl_ipv4_init+0x0/0x4e @ 1
[ 0.851419] initcall sysctl_ipv4_init+0x0/0x4e returned 0 after 35 usecs
[ 0.851421] calling bbr_register+0x0/0x15 @ 1
[ 0.851423] initcall bbr_register+0x0/0x15 returned 0 after 0 usecs
[ 0.851424] calling xfrm_user_init+0x0/0x49 @ 1
[ 0.851426] Initializing XFRM netlink socket
[ 0.851428] initcall xfrm_user_init+0x0/0x49 returned 0 after 2 usecs
[ 0.851429] calling inet6_init+0x0/0x374 @ 1
[ 0.851490] NET: Registered PF_INET6 protocol family
[ 0.851661] Segment Routing with IPv6
[ 0.851665] In-situ OAM (IOAM) with IPv6
[ 0.851678] initcall inet6_init+0x0/0x374 returned 0 after 241 usecs
[ 0.851681] calling packet_init+0x0/0x7b @ 1
[ 0.851683] NET: Registered PF_PACKET protocol family
[ 0.851685] initcall packet_init+0x0/0x7b returned 0 after 1 usecs
[ 0.851686] calling packet_diag_init+0x0/0x15 @ 1
[ 0.851688] initcall packet_diag_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851690] calling br_init+0x0/0xf7 @ 1
[ 0.851698] initcall br_init+0x0/0xf7 returned 0 after 5 usecs
[ 0.851700] calling br_netfilter_init+0x0/0x58 @ 1
[ 0.851706] Bridge firewalling registered
[ 0.851707] initcall br_netfilter_init+0x0/0x58 returned 0 after 4 usecs
[ 0.851709] calling ebtables_init+0x0/0x5f @ 1
[ 0.851711] initcall ebtables_init+0x0/0x5f returned 0 after 0 usecs
[ 0.851713] calling ebtable_broute_init+0x0/0x46 @ 1
[ 0.851715] initcall ebtable_broute_init+0x0/0x46 returned 0 after 0 usecs
[ 0.851717] calling ebtable_filter_init+0x0/0x46 @ 1
[ 0.851719] initcall ebtable_filter_init+0x0/0x46 returned 0 after 0 usecs
[ 0.851721] calling ebtable_nat_init+0x0/0x46 @ 1
[ 0.851724] initcall ebtable_nat_init+0x0/0x46 returned 0 after 0 usecs
[ 0.851725] calling ebt_802_3_init+0x0/0x15 @ 1
[ 0.851727] initcall ebt_802_3_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851729] calling ebt_among_init+0x0/0x15 @ 1
[ 0.851731] initcall ebt_among_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851733] calling ebt_arp_init+0x0/0x15 @ 1
[ 0.851735] initcall ebt_arp_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851737] calling ebt_ip_init+0x0/0x15 @ 1
[ 0.851739] initcall ebt_ip_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851741] calling ebt_ip6_init+0x0/0x15 @ 1
[ 0.851743] initcall ebt_ip6_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851745] calling ebt_limit_init+0x0/0x15 @ 1
[ 0.851746] initcall ebt_limit_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851748] calling ebt_mark_m_init+0x0/0x15 @ 1
[ 0.851750] initcall ebt_mark_m_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851752] calling ebt_pkttype_init+0x0/0x15 @ 1
[ 0.851754] initcall ebt_pkttype_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851756] calling ebt_stp_init+0x0/0x15 @ 1
[ 0.851758] initcall ebt_stp_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851760] calling ebt_vlan_init+0x0/0x2e @ 1
[ 0.851762] initcall ebt_vlan_init+0x0/0x2e returned 0 after 0 usecs
[ 0.851764] calling ebt_arpreply_init+0x0/0x15 @ 1
[ 0.851766] initcall ebt_arpreply_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851768] calling ebt_mark_init+0x0/0x15 @ 1
[ 0.851769] initcall ebt_mark_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851771] calling ebt_dnat_init+0x0/0x15 @ 1
[ 0.851773] initcall ebt_dnat_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851775] calling ebt_redirect_init+0x0/0x15 @ 1
[ 0.851777] initcall ebt_redirect_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851779] calling ebt_snat_init+0x0/0x15 @ 1
[ 0.851789] initcall ebt_snat_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851790] calling ebt_log_init+0x0/0x15 @ 1
[ 0.851792] initcall ebt_log_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851794] calling ebt_nflog_init+0x0/0x15 @ 1
[ 0.851796] initcall ebt_nflog_init+0x0/0x15 returned 0 after 0 usecs
[ 0.851798] calling strp_dev_init+0x0/0x3c @ 1
[ 0.851829] initcall strp_dev_init+0x0/0x3c returned 0 after 28 usecs
[ 0.851831] calling dcbnl_init+0x0/0x58 @ 1
[ 0.851834] initcall dcbnl_init+0x0/0x58 returned 0 after 0 usecs
[ 0.851836] calling pm_check_save_msr+0x0/0x80 @ 1
[ 0.851841] initcall pm_check_save_msr+0x0/0x80 returned 0 after 2 usecs
[ 0.851843] calling mcheck_init_device+0x0/0x12f @ 1
[ 0.852049] initcall mcheck_init_device+0x0/0x12f returned 0 after 198 usecs
[ 0.852052] calling dev_mcelog_init_device+0x0/0xd7 @ 1
[ 0.852072] initcall dev_mcelog_init_device+0x0/0xd7 returned 0 after 18 usecs
[ 0.852159] calling tboot_late_init+0x0/0x13b @ 1
[ 0.852160] initcall tboot_late_init+0x0/0x13b returned 0 after 0 usecs
[ 0.852162] calling mcheck_late_init+0x0/0x65 @ 1
[ 0.852166] initcall mcheck_late_init+0x0/0x65 returned 0 after 2 usecs
[ 0.852168] calling severities_debugfs_init+0x0/0x36 @ 1
[ 0.852171] initcall severities_debugfs_init+0x0/0x36 returned 0 after 0 usecs
[ 0.852172] calling microcode_init+0x0/0x1fa @ 1
[ 0.852192] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.852354] microcode: Microcode Update Driver: v2.2.
[ 0.852355] initcall microcode_init+0x0/0x1fa returned 0 after 176 usecs
[ 0.852357] calling resctrl_late_init+0x0/0x29a @ 1
[ 0.852359] initcall resctrl_late_init+0x0/0x29a returned -19 after 0 usecs
[ 0.852361] calling hpet_insert_resource+0x0/0x2e @ 1
[ 0.852364] initcall hpet_insert_resource+0x0/0x2e returned 0 after 0 usecs
[ 0.852366] calling start_sync_check_timer+0x0/0x6b @ 1
[ 0.852368] initcall start_sync_check_timer+0x0/0x6b returned 0 after 0 usecs
[ 0.852369] calling update_mp_table+0x0/0x2b4 @ 1
[ 0.852370] initcall update_mp_table+0x0/0x2b4 returned 0 after 0 usecs
[ 0.852372] calling lapic_insert_resource+0x0/0x4d @ 1
[ 0.852373] initcall lapic_insert_resource+0x0/0x4d returned 0 after 0 usecs
[ 0.852375] calling print_ipi_mode+0x0/0x32 @ 1
[ 0.852376] IPI shorthand broadcast: enabled
[ 0.852377] initcall print_ipi_mode+0x0/0x32 returned 0 after 0 usecs
[ 0.852378] calling print_ICs+0x0/0x9c @ 1
[ 0.852380] initcall print_ICs+0x0/0x9c returned 0 after 0 usecs
[ 0.852381] calling setup_efi_kvm_sev_migration+0x0/0x15e @ 1
[ 0.852383] initcall setup_efi_kvm_sev_migration+0x0/0x15e returned 0 after 0 usecs
[ 0.852385] calling create_tlb_single_page_flush_ceiling+0x0/0x35 @ 1
[ 0.852389] initcall create_tlb_single_page_flush_ceiling+0x0/0x35 returned 0 after 1 usecs
[ 0.852391] calling pat_memtype_list_init+0x0/0x4d @ 1
[ 0.852397] initcall pat_memtype_list_init+0x0/0x4d returned 0 after 3 usecs
[ 0.852400] calling create_init_pkru_value+0x0/0x49 @ 1
[ 0.852402] initcall create_init_pkru_value+0x0/0x49 returned 0 after 0 usecs
[ 0.852404] calling aesni_init+0x0/0x137 @ 1
[ 0.852407] AVX version of gcm_enc/dec engaged.
[ 0.852525] AES CTR mode by8 optimization enabled
[ 0.852696] initcall aesni_init+0x0/0x137 returned 0 after 282 usecs
[ 0.852699] calling reboot_ksysfs_init+0x0/0x50 @ 1
[ 0.852704] initcall reboot_ksysfs_init+0x0/0x50 returned 0 after 3 usecs
[ 0.852706] calling sched_clock_init_late+0x0/0x95 @ 1
[ 0.852708] sched_clock: Marking stable (798758147, 53935889)->(877722671, -25028635)
[ 0.852728] initcall sched_clock_init_late+0x0/0x95 returned 0 after 19 usecs
[ 0.852730] calling sched_init_debug+0x0/0x240 @ 1
[ 0.852851] initcall sched_init_debug+0x0/0x240 returned 0 after 115 usecs
[ 0.852853] calling cpu_latency_qos_init+0x0/0x3d @ 1
[ 0.852870] initcall cpu_latency_qos_init+0x0/0x3d returned 0 after 14 usecs
[ 0.852872] calling pm_debugfs_init+0x0/0x30 @ 1
[ 0.852875] initcall pm_debugfs_init+0x0/0x30 returned 0 after 1 usecs
[ 0.852877] calling printk_late_init+0x0/0x131 @ 1
[ 0.852885] initcall printk_late_init+0x0/0x131 returned 0 after 6 usecs
[ 0.852887] calling init_srcu_module_notifier+0x0/0x2b @ 1
[ 0.852890] initcall init_srcu_module_notifier+0x0/0x2b returned 0 after 0 usecs
[ 0.852892] calling swiotlb_create_default_debugfs+0x0/0x6a @ 1
[ 0.852899] initcall swiotlb_create_default_debugfs+0x0/0x6a returned 0 after 4 usecs
[ 0.852901] calling tk_debug_sleep_time_init+0x0/0x30 @ 1
[ 0.852905] initcall tk_debug_sleep_time_init+0x0/0x30 returned 0 after 0 usecs
[ 0.852907] calling taskstats_init+0x0/0x3c @ 1
[ 0.852913] registered taskstats version 1
[ 0.852913] initcall taskstats_init+0x0/0x3c returned 0 after 3 usecs
[ 0.852916] calling bpf_map_iter_init+0x0/0x2d @ 1
[ 0.852918] initcall bpf_map_iter_init+0x0/0x2d returned 0 after 0 usecs
[ 0.852919] calling task_iter_init+0x0/0xcf @ 1
[ 0.852921] initcall task_iter_init+0x0/0xcf returned 0 after 0 usecs
[ 0.852922] calling bpf_prog_iter_init+0x0/0x1d @ 1
[ 0.852924] initcall bpf_prog_iter_init+0x0/0x1d returned 0 after 0 usecs
[ 0.852925] calling init_trampolines+0x0/0x1b @ 1
[ 0.852927] initcall init_trampolines+0x0/0x1b returned 0 after 0 usecs
[ 0.852929] calling load_system_certificate_list+0x0/0x33 @ 1
[ 0.852930] Loading compiled-in X.509 certificates
[ 0.853716] Loaded X.509 cert 'Build time autogenerated kernel key: 6df5b5a4b69b583b5cfe170eb506419326e9836c'
[ 0.853718] initcall load_system_certificate_list+0x0/0x33 returned 0 after 768 usecs
[ 0.853720] calling fault_around_debugfs+0x0/0x30 @ 1
[ 0.853724] initcall fault_around_debugfs+0x0/0x30 returned 0 after 1 usecs
[ 0.853725] calling prezero_debugfs+0x0/0xc0 @ 1
[ 0.853733] initcall prezero_debugfs+0x0/0xc0 returned 0 after 4 usecs
[ 0.853735] calling max_swapfiles_check+0x0/0x4 @ 1
[ 0.853738] initcall max_swapfiles_check+0x0/0x4 returned 0 after 0 usecs
[ 0.853740] calling init_zswap+0x0/0x338 @ 1
[ 0.854723] zswap: loaded using pool zstd/zbud
[ 0.854869] initcall init_zswap+0x0/0x338 returned 0 after 1100 usecs
[ 0.854875] calling split_huge_pages_debugfs+0x0/0x30 @ 1
[ 0.854879] initcall split_huge_pages_debugfs+0x0/0x30 returned 0 after 0 usecs
[ 0.854881] calling check_early_ioremap_leak+0x0/0x48 @ 1
[ 0.854884] initcall check_early_ioremap_leak+0x0/0x48 returned 0 after 0 usecs
[ 0.854886] calling set_hardened_usercopy+0x0/0x2c @ 1
[ 0.854889] initcall set_hardened_usercopy+0x0/0x2c returned 1 after 0 usecs
[ 0.854891] calling fscrypt_init+0x0/0x8b @ 1
[ 0.854925] Key type ._fscrypt registered
[ 0.854926] Key type .fscrypt registered
[ 0.854927] Key type fscrypt-provisioning registered
[ 0.854927] initcall fscrypt_init+0x0/0x8b returned 0 after 33 usecs
[ 0.854929] calling init_btrfs_fs+0x0/0x13b @ 1
[ 0.855058] Btrfs loaded, crc32c=crc32c-intel, zoned=yes, fsverity=no
[ 0.855062] initcall init_btrfs_fs+0x0/0x13b returned 0 after 127 usecs
[ 0.855064] calling pstore_init+0x0/0x5f @ 1
[ 0.855222] pstore: Using crash dump compression: zstd
[ 0.855225] initcall pstore_init+0x0/0x5f returned 0 after 154 usecs
[ 0.855227] calling init_root_keyring+0x0/0x14 @ 1
[ 0.855240] initcall init_root_keyring+0x0/0x14 returned 0 after 10 usecs
[ 0.855242] calling init_trusted+0x0/0xd0 @ 1
[ 0.855380] initcall init_trusted+0x0/0xd0 returned 0 after 132 usecs
[ 0.855382] calling init_encrypted+0x0/0xd7 @ 1
[ 0.855649] Key type encrypted registered
[ 0.855650] initcall init_encrypted+0x0/0xd7 returned 0 after 259 usecs
[ 0.855653] calling crypto_algapi_init+0x0/0x7d @ 1
[ 0.856770] initcall crypto_algapi_init+0x0/0x7d returned 0 after 1089 usecs
[ 0.856773] calling blk_timeout_init+0x0/0xf @ 1
[ 0.856776] initcall blk_timeout_init+0x0/0xf returned 0 after 0 usecs
[ 0.856778] calling prandom_init_late+0x0/0x31 @ 1
[ 0.856781] initcall prandom_init_late+0x0/0x31 returned 0 after 0 usecs
[ 0.856783] calling pci_resource_alignment_sysfs_init+0x0/0x1e @ 1
[ 0.856787] initcall pci_resource_alignment_sysfs_init+0x0/0x1e returned 0 after 1 usecs
[ 0.856789] calling pci_sysfs_init+0x0/0x75 @ 1
[ 0.856817] initcall pci_sysfs_init+0x0/0x75 returned 0 after 26 usecs
[ 0.856819] calling bert_init+0x0/0x230 @ 1
[ 0.856822] initcall bert_init+0x0/0x230 returned 0 after 1 usecs
[ 0.856823] calling clk_debug_init+0x0/0x114 @ 1
[ 0.856833] initcall clk_debug_init+0x0/0x114 returned 0 after 7 usecs
[ 0.856834] calling dmar_free_unused_resources+0x0/0xbf @ 1
[ 0.856837] initcall dmar_free_unused_resources+0x0/0xbf returned 0 after 0 usecs
[ 0.856839] calling sync_state_resume_initcall+0x0/0x40 @ 1
[ 0.856844] initcall sync_state_resume_initcall+0x0/0x40 returned 0 after 0 usecs
[ 0.856846] calling deferred_probe_initcall+0x0/0xc0 @ 1
[ 0.856857] initcall deferred_probe_initcall+0x0/0xc0 returned 0 after 9 usecs
[ 0.856860] calling hmem_init+0x0/0x36 @ 1
[ 0.856866] initcall hmem_init+0x0/0x36 returned 0 after 3 usecs
[ 0.856868] calling acpi_cpufreq_init+0x0/0x21a @ 1
[ 0.856871] initcall acpi_cpufreq_init+0x0/0x21a returned -17 after 0 usecs
[ 0.856872] calling firmware_memmap_init+0x0/0x36 @ 1
[ 0.856904] initcall firmware_memmap_init+0x0/0x36 returned 0 after 28 usecs
[ 0.856906] calling efi_shutdown_init+0x0/0x3d @ 1
[ 0.856908] initcall efi_shutdown_init+0x0/0x3d returned 0 after 0 usecs
[ 0.856910] calling efi_rci2_sysfs_init+0x0/0x227 @ 1
[ 0.856913] initcall efi_rci2_sysfs_init+0x0/0x227 returned 0 after 0 usecs
[ 0.856915] calling efi_earlycon_unmap_fb+0x0/0x2f @ 1
[ 0.856917] initcall efi_earlycon_unmap_fb+0x0/0x2f returned 0 after 0 usecs
[ 0.856919] calling itmt_legacy_init+0x0/0x58 @ 1
[ 0.856922] initcall itmt_legacy_init+0x0/0x58 returned -19 after 0 usecs
[ 0.856925] calling cec_init+0x0/0x195 @ 1
[ 0.856932] RAS: Correctable Errors collector initialized.
[ 0.856932] initcall cec_init+0x0/0x195 returned 0 after 4 usecs
[ 0.856934] calling bpf_sockmap_iter_init+0x0/0x21 @ 1
[ 0.856936] initcall bpf_sockmap_iter_init+0x0/0x21 returned 0 after 0 usecs
[ 0.856938] calling bpf_sk_storage_map_iter_init+0x0/0x21 @ 1
[ 0.856939] initcall bpf_sk_storage_map_iter_init+0x0/0x21 returned 0 after 0 usecs
[ 0.856941] calling tcp_congestion_default+0x0/0x1e @ 1
[ 0.856943] initcall tcp_congestion_default+0x0/0x1e returned 0 after 0 usecs
[ 0.856944] calling tcp_bpf_v4_build_proto+0x0/0x92 @ 1
[ 0.856947] initcall tcp_bpf_v4_build_proto+0x0/0x92 returned 0 after 0 usecs
[ 0.856949] calling udp_bpf_v4_build_proto+0x0/0x43 @ 1
[ 0.856950] initcall udp_bpf_v4_build_proto+0x0/0x43 returned 0 after 0 usecs
[ 0.856952] calling pci_mmcfg_late_insert_resources+0x0/0x56 @ 1
[ 0.856955] initcall pci_mmcfg_late_insert_resources+0x0/0x56 returned 0 after 0 usecs
[ 0.856958] calling software_resume+0x0/0x40 @ 1
[ 0.856960] initcall software_resume+0x0/0x40 returned -2 after 0 usecs
[ 0.856962] calling latency_fsnotify_init+0x0/0x41 @ 1
[ 0.856965] initcall latency_fsnotify_init+0x0/0x41 returned 0 after 2 usecs
[ 0.856967] calling trace_eval_sync+0x0/0x22 @ 1
[ 0.856971] initcall trace_eval_sync+0x0/0x22 returned 0 after 2 usecs
[ 0.856972] calling late_trace_init+0x0/0xa4 @ 1
[ 0.856973] initcall late_trace_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.856975] calling acpi_gpio_handle_deferred_request_irqs+0x0/0x5c @ 1
[ 0.856979] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0x5c returned 0 after 2 usecs
[ 0.856981] calling clk_disable_unused+0x0/0xe1 @ 1
[ 0.856983] initcall clk_disable_unused+0x0/0xe1 returned 0 after 0 usecs
[ 0.856984] calling regulator_init_complete+0x0/0x2e @ 1
[ 0.856986] initcall regulator_init_complete+0x0/0x2e returned 0 after 0 usecs
[ 0.958401] Console: switching to colour frame buffer device 200x56
[ 0.974189] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.982713] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 0.989228] usb 3-2: new full-speed USB device number 2 using xhci_hcd
[ 0.990040] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.008828] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.009662] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.011561] ata1.00: HPA detected: current 1880000000, native 1953525168
[ 1.012297] ata1.00: ATA-8: WDC WD10EZRX-00A8LB0, 01.01A01, max UDMA/133
[ 1.014000] ata1.00: 1880000000 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.016216] ata1.00: configured for UDMA/133
[ 1.017089] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZRX-00A 1A01 PQ: 0 ANSI: 5
[ 1.018219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.018296] sd 0:0:0:0: [sda] 1880000000 512-byte logical blocks: (963 GB/896 GiB)
[ 1.019778] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.020552] sd 0:0:0:0: [sda] Write Protect is off
[ 1.021295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.021314] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.022435] ata2.00: HPA detected: current 5860531055, native 5860533168
[ 1.023277] ata2.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133
[ 1.024471] ata2.00: 5860531055 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.026095] ata2.00: configured for UDMA/133
[ 1.027059] scsi 1:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 0A82 PQ: 0 ANSI: 5
[ 1.028220] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.028477] sd 1:0:0:0: [sdb] 5860531055 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.030019] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.030899] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.031734] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.031746] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.032292] random: fast init done
[ 1.063227] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.095606] sda: sda1 sda2
[ 1.105236] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.106478] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)
[ 1.107480] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.109103] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.110631] hub 1-1:1.0: USB hub found
[ 1.111979] hub 1-1:1.0: 6 ports detected
[ 1.119479] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 1.120812] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.122254] hub 2-1:1.0: USB hub found
[ 1.123604] hub 2-1:1.0: 8 ports detected
[ 1.161701] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[ 1.165021] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
[ 1.166025] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.167157] usb 3-2: Product: USB Receiver
[ 1.168417] usb 3-2: Manufacturer: Logitech
[ 1.188404] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 1.189801] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 1.200082] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.0/0003:046D:C52B.0001/input/input2
[ 1.223314] devtmpfs: mounted
[ 1.224884] Freeing unused decrypted memory: 2036K
[ 1.226423] Freeing unused kernel image (initmem) memory: 1724K
[ 1.227793] Write protecting the kernel read-only data: 32768k
[ 1.229490] Freeing unused kernel image (text/rodata gap) memory: 2028K
[ 1.230985] Freeing unused kernel image (rodata/data gap) memory: 1004K
[ 1.232350] Run /usr/bin/initra-desktop as init process
[ 1.233689] with arguments:
[ 1.233690] /usr/bin/initra-desktop
[ 1.233691] with environment:
[ 1.233692] HOME=/
[ 1.233693] TERM=linux
[ 1.253448] hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:03:00.0-2/input0
[ 1.277371] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input3
[ 1.278631] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input4
[ 1.331378] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.1/0003:046D:C52B.0002/input/input5
[ 1.332808] hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:03:00.0-2/input1
[ 1.350458] hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-2/input2
[ 1.731230] tsc: Refined TSC clocksource calibration: 3392.293 MHz
[ 1.732300] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5de2a436, max_idle_ns: 440795285127 ns
[ 1.733485] clocksource: Switched to clocksource tsc
[ 1.831383] random: crng init done
[ 7.378091] systemd[1]: systemd 249 running in system mode (+PAM +AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 -IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK -PCRE2 +PWQUALITY +P11KIT -QRENCODE -BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=hybrid)
[ 7.392318] systemd[1]: Detected architecture x86-64.
[ 7.417868] systemd[1]: Hostname set to <hyrax>.
[ 9.151062] systemd[250]: /usr/lib/systemd/system-generators/nfs-server-generator failed with exit status 1.
[ 9.188414] systemd[1]: /usr/lib/systemd/system/rpcbind.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/rpcbind.sock → /run/rpcbind.sock; please update the unit file accordingly.
[ 9.213939] systemd[1]: Queued start job for default target Graphical Interface.
[ 9.223936] systemd[1]: Created slice Slice /system/getty.
[ 9.225592] systemd[1]: Created slice Slice /system/modprobe.
[ 9.227107] systemd[1]: Created slice User and Session Slice.
[ 9.228317] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.229597] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.230888] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.232151] systemd[1]: Reached target Local Encrypted Volumes.
[ 9.233360] systemd[1]: Reached target Remote File Systems.
[ 9.234538] systemd[1]: Reached target Slice Units.
[ 9.236481] systemd[1]: Listening on Process Core Dump Socket.
[ 9.237741] systemd[1]: Listening on Journal Audit Socket.
[ 9.238958] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.240149] systemd[1]: Listening on Journal Socket.
[ 9.241332] systemd[1]: Listening on udev Control Socket.
[ 9.242507] systemd[1]: Listening on udev Kernel Socket.
[ 9.244230] systemd[1]: Mounting NFSD configuration filesystem...
[ 9.246000] systemd[1]: Mounting Kernel Trace File System...
[ 9.247907] systemd[1]: Starting Create List of Static Device Nodes...
[ 9.249636] systemd[1]: Starting Load Kernel Module drm...
[ 9.251912] systemd[1]: Starting Journal Service...
[ 9.336459] systemd[1]: Starting Load Kernel Modules...
[ 9.338293] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 9.339447] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[ 9.341244] systemd[1]: Starting Coldplug All udev Devices...
[ 9.343420] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[ 9.345855] systemd[1]: Mounted Kernel Trace File System.
[ 9.347505] systemd[1]: Finished Create List of Static Device Nodes.
[ 9.348885] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 9.350277] systemd[1]: Finished Load Kernel Module drm.
[ 9.382678] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 9.383921] systemd[1]: Reached target Preparation for Local File Systems.
[ 9.385812] systemd[1]: Activating swap Default Swap File (/var/swapfile)...
[ 9.387633] systemd[1]: Starting Load/Save Random Seed...
[ 9.404999] systemd[1]: Finished Coldplug All udev Devices.
[ 9.435506] systemd[1]: Started Journal Service.
[ 9.440438] systemd-journald[266]: Received client request to flush runtime journal.
[ 9.538036] calling dm_multipath_init+0x0/0x1000 [dm_multipath] @ 268
[ 9.538191] initcall dm_multipath_init+0x0/0x1000 [dm_multipath] returned 0 after 145 usecs
[ 9.794136] Adding 65532k swap on /var/swapfile. Priority:-2 extents:1 across:65532k FS
[ 9.827110] calling init_sunrpc+0x0/0x79 [sunrpc] @ 267
[ 9.827266] RPC: Registered named UNIX socket transport module.
[ 9.828361] RPC: Registered udp transport module.
[ 9.829387] RPC: Registered tcp transport module.
[ 9.830393] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.831430] initcall init_sunrpc+0x0/0x79 [sunrpc] returned 0 after 4178 usecs
[ 9.858590] calling init_grace+0x0/0x1000 [grace] @ 267
[ 9.858597] initcall init_grace+0x0/0x1000 [grace] returned 0 after 1 usecs
[ 9.910795] calling init_nlm+0x0/0x5f [lockd] @ 267
[ 9.910810] initcall init_nlm+0x0/0x5f [lockd] returned 0 after 6 usecs
[ 10.012630] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 298
[ 10.012639] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013037] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 287
[ 10.013045] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013279] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 289
[ 10.013285] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013486] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 297
[ 10.013491] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013638] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 296
[ 10.013644] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013776] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 294
[ 10.013781] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.013917] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 286
[ 10.013921] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.014050] calling pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] @ 291
[ 10.014054] initcall pcc_cpufreq_init+0x0/0xaa1 [pcc_cpufreq] returned -17 after 0 usecs
[ 10.022755] calling init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] @ 267
[ 10.022780] initcall init_rpcsec_gss+0x0/0x1000 [auth_rpcgss] returned 0 after 9 usecs
[ 10.080294] calling init_nfsd+0x0/0x1000 [nfsd] @ 267
[ 10.080322] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.081498] initcall init_nfsd+0x0/0x1000 [nfsd] returned 0 after 1148 usecs
[ 10.086806] calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 293
[ 10.086935] initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 119 usecs
[ 10.097346] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 290
[ 10.097415] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 59 usecs
[ 10.127048] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 291
[ 10.127096] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 40 usecs
[ 10.135296] calling mei_init+0x0/0xb5 [mei] @ 283
[ 10.135327] initcall mei_init+0x0/0xb5 [mei] returned 0 after 15 usecs
[ 10.137880] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 285
[ 10.137931] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 44 usecs
[ 10.142798] calling smbalert_driver_init+0x0/0x1000 [i2c_smbus] @ 295
[ 10.142816] initcall smbalert_driver_init+0x0/0x1000 [i2c_smbus] returned 0 after 11 usecs
[ 10.150241] calling mei_me_driver_init+0x0/0x1000 [mei_me] @ 283
[ 10.150275] initcall mei_me_driver_init+0x0/0x1000 [mei_me] returned 0 after 25 usecs
[ 10.154484] calling logi_djreceiver_driver_init+0x0/0x1000 [hid_logitech_dj] @ 294
[ 10.157090] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-2/input2
[ 10.161200] calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 295
[ 10.161227] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 10.162380] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.163946] i2c i2c-9: 4/4 memory slots populated (from DMI)
[ 10.165316] i2c i2c-9: Successfully instantiated SPD at 0x50
[ 10.166835] i2c i2c-9: Successfully instantiated SPD at 0x51
[ 10.168239] i2c i2c-9: Successfully instantiated SPD at 0x52
[ 10.169673] i2c i2c-9: Successfully instantiated SPD at 0x53
[ 10.170830] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 9398 usecs
[ 10.191165] calling mei_pxp_driver_init+0x0/0x1000 [mei_pxp] @ 291
[ 10.191204] calling mei_hdcp_driver_init+0x0/0x1000 [mei_hdcp] @ 295
[ 10.194215] initcall mei_pxp_driver_init+0x0/0x1000 [mei_pxp] returned 0 after 2935 usecs
[ 10.198304] initcall mei_hdcp_driver_init+0x0/0x1000 [mei_hdcp] returned 0 after 6928 usecs
[ 10.223245] calling at24_init+0x0/0x1000 [at24] @ 284
[ 10.223264] at24 9-0050: supply vcc not found, using dummy regulator
[ 10.224828] at24 9-0050: 256 byte spd EEPROM, read-only
[ 10.225732] at24 9-0051: supply vcc not found, using dummy regulator
[ 10.227201] at24 9-0051: 256 byte spd EEPROM, read-only
[ 10.228020] at24 9-0052: supply vcc not found, using dummy regulator
[ 10.229426] at24 9-0052: 256 byte spd EEPROM, read-only
[ 10.230310] at24 9-0053: supply vcc not found, using dummy regulator
[ 10.232250] at24 9-0053: 256 byte spd EEPROM, read-only
[ 10.233472] initcall at24_init+0x0/0x1000 [at24] returned 0 after 9982 usecs
[ 10.233597] calling igb_init_module+0x0/0x1000 [igb] @ 288
[ 10.233612] igb: Intel(R) Gigabit Ethernet Network Driver
[ 10.234449] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 10.266235] initcall logi_djreceiver_driver_init+0x0/0x1000 [hid_logitech_dj] returned 0 after 31858 usecs
[ 10.272871] input: Logitech Wireless Device PID:4024 Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input7
[ 10.274475] input: Logitech Wireless Device PID:4024 Mouse as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input8
[ 10.275660] hid-generic 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4024] on usb-0000:03:00.0-2/input2:1
[ 10.276777] calling hidpp_driver_init+0x0/0x1000 [hid_logitech_hidpp] @ 295
[ 10.277019] input: Logitech Wireless Device PID:405e Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input12
[ 10.278235] input: Logitech Wireless Device PID:405e Mouse as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input13
[ 10.279464] hid-generic 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:405e] on usb-0000:03:00.0-2/input2:2
[ 10.285501] calling ichx_gpio_driver_init+0x0/0x1000 [gpio_ich] @ 292
[ 10.285702] gpio_ich gpio_ich.2.auto: GPIO from 948 to 1023
[ 10.286709] initcall ichx_gpio_driver_init+0x0/0x1000 [gpio_ich] returned 0 after 1175 usecs
[ 10.292836] calling joydev_init+0x0/0x1000 [joydev] @ 289
[ 10.292842] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 1 usecs
[ 10.416673] igb 0000:02:00.0: added PHC on eth0
[ 10.417615] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 10.418600] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:e0:ed:1d:33:02
[ 10.419670] igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF
[ 10.420605] igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 10.608595] igb 0000:02:00.1: added PHC on eth1
[ 10.609553] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 10.610554] igb 0000:02:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:e0:ed:1d:33:03
[ 10.611646] igb 0000:02:00.1: eth1: PBA No: FFFFFF-0FF
[ 10.612595] igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 10.613667] initcall igb_init_module+0x0/0x1000 [igb] returned 0 after 313306 usecs
[ 10.614870] igb 0000:02:00.0 enp2s0f0: renamed from eth0
[ 10.615987] igb 0000:02:00.1 enp2s0f1: renamed from eth1
[ 10.660601] logitech-hidpp-device 0003:046D:4024.0004: HID++ 2.0 device connected.
[ 15.598526] input: Logitech K400 as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:4024.0004/input/input17
[ 15.599859] logitech-hidpp-device 0003:046D:4024.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400] on usb-0000:03:00.0-2/input2:1
[ 15.612411] input: Logitech M720 Triathlon as /devices/pci0000:00/0000:00:1c.6/0000:03:00.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0003/0003:046D:405E.0005/input/input18
[ 15.613853] logitech-hidpp-device 0003:046D:405E.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech M720 Triathlon] on usb-0000:03:00.0-2/input2:2
[ 15.615149] initcall hidpp_driver_init+0x0/0x1000 [hid_logitech_hidpp] returned 0 after 5197566 usecs
[ 16.847799] igb 0000:02:00.0 enp2s0f0: igb: enp2s0f0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 16.955451] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready
[ 20.963700] NFSD: Using nfsdcld client tracking operations.
[ 20.963854] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000)
[ 22.439055] calling ovl_init+0x0/0x74 [overlay] @ 437
[ 22.439113] initcall ovl_init+0x0/0x74 [overlay] returned 0 after 38 usecs
[ 28.542882] calling load_umh+0x0/0x1000 [bpfilter] @ 442
[ 28.543210] bpfilter: Loaded bpfilter_umh pid 443
[ 28.543556] Started bpfilter
[ 28.543663] initcall load_umh+0x0/0x1000 [bpfilter] returned 0 after 747 usecs
[ 28.547525] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 444
[ 28.547552] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 14 usecs
[ 28.576991] calling nf_defrag_init+0x0/0x1000 [nf_defrag_ipv4] @ 446
[ 28.577004] initcall nf_defrag_init+0x0/0x1000 [nf_defrag_ipv4] returned 0 after 1 usecs
[ 28.589496] calling nf_defrag_init+0x0/0x1000 [nf_defrag_ipv6] @ 446
[ 28.589545] initcall nf_defrag_init+0x0/0x1000 [nf_defrag_ipv6] returned 0 after 35 usecs
[ 28.595066] calling nf_conntrack_standalone_init+0x0/0x1000 [nf_conntrack] @ 446
[ 28.595622] initcall nf_conntrack_standalone_init+0x0/0x1000 [nf_conntrack] returned 0 after 523 usecs
[ 28.597740] calling nf_nat_init+0x0/0x1000 [nf_nat] @ 446
[ 28.598002] initcall nf_nat_init+0x0/0x1000 [nf_nat] returned 0 after 243 usecs
[ 28.599256] calling iptable_nat_init+0x0/0x1000 [iptable_nat] @ 446
[ 28.599274] initcall iptable_nat_init+0x0/0x1000 [iptable_nat] returned 0 after 5 usecs
[ 28.604092] calling iptable_filter_init+0x0/0x1000 [iptable_filter] @ 448
[ 28.604108] initcall iptable_filter_init+0x0/0x1000 [iptable_filter] returned 0 after 3 usecs
[ 28.641699] calling addrtype_mt_init+0x0/0x1000 [xt_addrtype] @ 452
[ 28.641713] initcall addrtype_mt_init+0x0/0x1000 [xt_addrtype] returned 0 after 0 usecs
[ 28.737583] calling ctnetlink_init+0x0/0x1000 [nf_conntrack_netlink] @ 481
[ 28.737599] initcall ctnetlink_init+0x0/0x1000 [nf_conntrack_netlink] returned 0 after 2 usecs
[ 28.758792] calling masquerade_tg_init+0x0/0x1000 [xt_MASQUERADE] @ 485
[ 28.758811] initcall masquerade_tg_init+0x0/0x1000 [xt_MASQUERADE] returned 0 after 6 usecs
[ 28.780954] calling conntrack_mt_init+0x0/0x1000 [xt_conntrack] @ 501
[ 28.780968] initcall conntrack_mt_init+0x0/0x1000 [xt_conntrack] returned 0 after 0 usecs
[ 36.264495] calling xt_nat_init+0x0/0x1000 [xt_nat] @ 678
[ 36.264504] initcall xt_nat_init+0x0/0x1000 [xt_nat] returned 0 after 1 usecs
[ 36.490553] eth0: renamed from vethfe5399a
[ 38.627541] eth0: renamed from veth630d8c9
[ 38.729479] eth0: renamed from veth75a4b2b
[ 40.357432] eth0: renamed from vethad0ae58
[ 41.358470] eth0: renamed from veth975c012
[ 42.513475] eth0: renamed from veth2980502
[ 43.616687] eth0: renamed from veth96db039
[ 141.951437] process 'usr/local/bin/jt9' started with executable stack
root@hyrax/boot/loader/entries #
hash
root@hyrax/boot # sha256sum /boot/freestanding-00-intel-ucode.cpio
667a40df7ed47c9efa22839bad9a1f790b1dd30708f649bebe6a6715ac53ca5a /boot/freestanding-00-intel-ucode.cpio
root@hyrax/boot # sha256sum /boot/EFI/org.clearlinux/freestanding-00-intel-ucode.cpio
667a40df7ed47c9efa22839bad9a1f790b1dd30708f649bebe6a6715ac53ca5a /boot/EFI/org.clearlinux/freestanding-00-intel-ucode.cpio
Hi there,
As requested by William Douglas, I hereby post this issue on GitHub. I marked this issue as CRITICAL, because it keeps Clear Linux from booting.
Problem occurs when: A) Installing Clear Linux from ISO version 30130 B) Upgrading to version 30170 C) Maybe more versions, but these ones are for sure
The installer/updater places this line in BOOT_PARTITION/loader/loader:conf: 'default Clear-linux-native-5.1.15.791' (install) or 'default Clear-linux-native-5.1.15.792' (update to 30170).
Looking in the file BOOT_PARTITION/loader/entries/Clear-linux-native-5.1.15-79X.conf, I see the line: 'initrd /EFI/org.clearlinux/freestanding-00-intel-ucode.cpio'.
The file BOOT_PARTITION/EFI/org.clearlinux/freestanding-00-intel-ucode.cpio exists.
However, on boot, my computer stops before booting, stating the following three lines:
Failed to open file: EFI\org.clearlinux\freestanding-00-intel-ucode.cpio Trying to load files to higher address Failed to open file: EFI\org.clearlinux\freestanding-00-intel-ucode.cpio
I resolved this issue by removing this intel-ucode line from the loader.conf file and disable swupd auto update, because autoupdate will regenerate that line which keeps my system from booting.
Using patched Intel DH67BL Intel Desktop board along with an Intel i7 2600K CPU.
Kind regards,
Frank ter Voorde