Open ghost opened 4 years ago
Yes, you can edit the threshold in the PAL Threshold Editor by selecting Quick System Overview as the threshold file and clicking Edit. It’s under \LogicalDisk(*)\Avg. Disk sec/Transfer. Make sure you do Update Threshold and do a File, Save. If you installed PAL in the default C:\Program Files\PAL folder, then you may need to save the threshold file to your Desktop folder, then manually copy/overwrite it back to the PAL installation folder, then restart the PAL wizard to see the change.
Keep in mind that the threshold is in place to indicate when there is significant delays in disk IO processing which can still happen on SSDs, but certainly less often. What I’m saying is that I use the same threshold for when I’m testing SSDs. There are some really bad SSDs on the market that are slower than 5400 RPM spindle disks.
Thank you,
From: Hansdevries notifications@github.com Sent: Tuesday, September 10, 2019 10:01:45 AM To: clinthuffman/PAL PAL@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [clinthuffman/PAL] Ssd disks (#50)
Hi
In threshold html page after generating a report a see that value of disks is about 5400 rpm is there a way to adjust this or use ssd disks?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fclinthuffman%2FPAL%2Fissues%2F50%3Femail_source%3Dnotifications%26email_token%3DAEXDYVEBIFJ5P432VHYGGPLQI7HHTA5CNFSM4IVKICVKYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4HKQFFAA&data=02%7C01%7C%7Cd39944eb031a4a26b9c108d736109088%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637037317072277332&sdata=EeUd7vQodIUl0zw%2B2X6KzgnNuy53FydYeGTEgZCcPa0%3D&reserved=0, or mute the threadhttps://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fnotifications%2Funsubscribe-auth%2FAEXDYVB4OW4PFKTCKTQ7AY3QI7HHTANCNFSM4IVKICVA&data=02%7C01%7C%7Cd39944eb031a4a26b9c108d736109088%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637037317072287341&sdata=nmvJS5h3PW%2FxF2eI7dIXuC12Ji4Dad7yF5M6RgwBAlk%3D&reserved=0.
Hello,
Regarding the disk counter for both reading and writing, threshold is shown for 5400 RPM disks but I would like to know what is the threshold for 7200 RPM, 10000 RPM disks and for SSD, I am very grateful if you indicate how I do to determine it.
https://mcpmag.com/articles/2011/05/12/how-to-speak-san-ish.aspx?m=1
On Fri, Jul 3, 2020, 5:24 PM leafar8710 notifications@github.com wrote:
Hello,
Regarding the disk counter for both reading and writing, threshold is shown for 5400 RPM disks but I would like to know what is the threshold for 7200 RPM, 10000 RPM disks and for SSD, I am very grateful if you indicate how I do to determine it.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/clinthuffman/PAL/issues/50#issuecomment-653680291, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACFOL6PDZYN2DPDYMF6OJALRZZEBLANCNFSM4IVKICVA .
Was going to attach the chart in that but it's not a graphic
On Sun, Jul 5, 2020, 9:49 AM Jeff Stokes notifications@github.com wrote:
https://mcpmag.com/articles/2011/05/12/how-to-speak-san-ish.aspx?m=1
On Fri, Jul 3, 2020, 5:24 PM leafar8710 notifications@github.com wrote:
Hello,
Regarding the disk counter for both reading and writing, threshold is shown for 5400 RPM disks but I would like to know what is the threshold for 7200 RPM, 10000 RPM disks and for SSD, I am very grateful if you indicate how I do to determine it.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/clinthuffman/PAL/issues/50#issuecomment-653680291, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ACFOL6PDZYN2DPDYMF6OJALRZZEBLANCNFSM4IVKICVA
.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/clinthuffman/PAL/issues/50#issuecomment-653891288, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACFOL6NUCVFZBYKALJZ6RS3R2CAH7ANCNFSM4IVKICVA .
Hi
In threshold html page after generating a report a see that value of disks is about 5400 rpm is there a way to adjust this or use ssd disks?