When using bucc up --lite (after bucc down --clean), Attaching disk to vm is failing.
When Attaching disk task starts, the vm status goes into "Aborted," I've checked the logs of the vm but can't see anything useful:
00:00:10.750687 Audio: Disabling input for driver 'CoreAudio'
00:00:10.804227 Audio: Enabling input for driver 'CoreAudio'
00:00:10.820188 Audio: Disabling input for driver 'CoreAudio'
00:00:10.873021 Audio: Enabling input for driver 'CoreAudio'
00:00:25.899273 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0xc8 (-1 usec ago) CmdIf1=0xc8 (-1 usec ago)
00:00:25.899424 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:32.352704 Changing the VM state from 'RUNNING' to 'SUSPENDING'
00:00:32.742042 PDMR3Suspend: 389 275 012 ns run time
00:00:32.742110 Changing the VM state from 'SUSPENDING' to 'SUSPENDED'
00:00:32.742134 Console: Machine state changed to 'Paused'
00:00:32.831141 DrvVD: Flushes will be ignored
00:00:32.831180 DrvVD: Async flushes will be passed to the disk
00:00:32.835211 VD: Opening the disk took 4014132 ns
00:00:32.835305 PIIX3 ATA: LUN#2: disk, PCHS=16383/16/63, total number of sectors 134217728
00:00:32.835507 ************************* CFGM dump *************************
00:00:32.835509 [/Devices/piix3ide/0/LUN#2/] (level 0)
00:00:32.835512 Driver <string> = "VD" (cb=3)
00:00:32.835513
00:00:32.835514 [/Devices/piix3ide/0/LUN#2/Config/] (level 1) (restricted root)
00:00:32.835516 Format <string> = "VMDK" (cb=5)
00:00:32.835518 Mountable <integer> = 0x0000000000000000 (0)
00:00:32.835520 Path <string> = "/Users/huytran/.bosh_virtualbox_cpi/disks/disk-4d3350c0-5b61-458a-6ac7-41337d252bf3/disk.vmdk" (cb=94)
00:00:32.835521 Type <string> = "HardDisk" (cb=9)
00:00:32.835522
00:00:32.835523 ********************* End of CFGM dump **********************
00:00:32.902423 Changing the VM state from 'SUSPENDED' to 'RESUMING'
00:00:32.983719 Changing the VM state from 'RESUMING' to 'RUNNING'
00:00:32.983758 Console: Machine state changed to 'Running'```
When the cli is trying to attach the disk, it takes quite some time for it to figure out it can't attach the disk. Any ideas how I can debug this?
Steps i've taken:
- Allow permission to virtual box to control my host machine in mac>perferenced>security&privacy
- Ensure all vms on virtualbox are removed before bucc up --lite
- Ensure all state/* files are removed.
- Monitoring vbox to see vm* status goes from "Running" to "Aborted" when "Attaching disk" occurred.
Any help is appreciated, thanks!
When using bucc up --lite (after bucc down --clean), Attaching disk to vm is failing.
When Attaching disk task starts, the vm status goes into "Aborted," I've checked the logs of the vm but can't see anything useful: