Closed ck2qsuZT closed 8 years ago
Please connect both devices to the network.
They should both be connected to wifi no?
I have not seen the led controller 5 hours ago. (At least not with the MAC address.)
My bad, it should be connected now.
I still do not see the LED light.
The LED strip has a current IP of: 10.20.34.71 and a MAC of: AC:CF:23:43:A2:74
I do not see it at all among leases. It is possible that it take the IP, but then releases it?
Can you restart the strip like now?
I just reset it and I'm actively using it so it should be on the network.
On Sun, Dec 6, 2015 at 1:18 PM, Mitar notifications@github.com wrote:
Can you restart the strip like now?
— Reply to this email directly or view it on GitHub https://github.com/cloyne/network/issues/57#issuecomment-162348382.
If you tell me the IP to use for it I can try to set it so you don't waste time.
On Sun, Dec 6, 2015 at 1:31 PM, James Martins jsnm@berkeley.edu wrote:
I just reset it and I'm actively using it so it should be on the network.
On Sun, Dec 6, 2015 at 1:18 PM, Mitar notifications@github.com wrote:
Can you restart the strip like now?
— Reply to this email directly or view it on GitHub https://github.com/cloyne/network/issues/57#issuecomment-162348382.
Does it use a static IP or a DHCP? Please configure it to use DHCP.
It uses dhcp
I do not see it at all. I think we should meet it look into this together.
I got rid of the controller in favor of a raspberry pi
Hey Mitar, Can I get two static ips? A WiFi led controller I have doesn't work if it's not on the same 255.255.255.0 network as the phone.
Mac addresses: Phone c0:ee:fb:5a:4c:d6 Led controller: ac:cf:23:43:a2:74