search

cmer / gigabyte-z390-aorus-master-hackintosh

A guide to build your own Hackintosh based on Gigabyte Z390 Aorus Master
473 stars 112 forks source link

Clover overwrites bios settings (vCore)? #17

Closed alexbohariuc closed 5 years ago

alexbohariuc commented 5 years ago

Hey,

I’m using the same hardware, settings and EFI Folder - i noticed that my VCore values go up to 1.44v, but in bios it’s set to 1.290 at 4.9GHz. Any thoughts? Somehow Clover seems to overwrite them. @cmer are your VCore values the same as in the bios? Using HWmonitor and iStat Pro to monitor them.

cmer commented 5 years ago

Not sure... perhaps it's trying to use more power under load? I wouldn't worry about it if there's no issue.

alexbohariuc commented 5 years ago

Temps never go above 80-89 ish in full load with Cinebench. Just for the sake of it i’ll measure the VCore with a multimeter.

cmer commented 5 years ago

That's pretty standard for that cpu and also what I get, I believe. Let us know what your investigation reveals.

On Sat, Jun 1, 2019 at 7:24 PM, Alex Bohariuc notifications@github.com wrote: Temps never go above 80-89 ish in full load with Cinebench. Just for the sake of it i’ll measure the VCore with a multimeter.

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub [https://github.com/cmer/gigabyte-z390-aorus-master-hackintosh/issues/17?email_source=notifications&email_token=AAAADHDE72LVM3Q2LRC466TPYMALZA5CNFSM4HMHYACKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODWXKNNA#issuecomment-497985204] , or mute the thread [https://github.com/notifications/unsubscribe-auth/AAAADHBJAM6PTUJU67MTCUTPYMALZANCNFSM4HMHYACA] .