search

cmlab / NetFPGA-1G-CML

Information about the NetFPGA 1G-CML card
14 stars 16 forks source link

make: *** No rule to make target `../reg_defines.h ', needed by` src / org / netfpga / backend / NFDeviceConsts.java'. Stop. #15

Closed rjacauna closed 9 years ago

rjacauna commented 9 years ago

Hi all, Someone had already got the bug down and managed to solve? I've done the pass-by-step instructions for creating lite switch records, but this error remains. If anyone can and know how to solve, please give feedback. Thank you!

make: *\ No rule to make target ../reg_defines.h ', needed by src / org / netfpga / backend / NFDeviceConsts.java'. Stop.

davidva-cml commented 9 years ago

Hello,

Are you trying to build the router GUI? If so, please perform the following steps:

  1. Run "make regs" from projects/reference_router_nf1_cml/hw/
  2. Run "make" from projects/reference_router_nf1_cml/sw/host/gui (check first that reg_defines.h exists in projects/reference_router_nf1_cml/sw/host/ from Step 1)

David Van Arnem Development Engineer Computer Measurement Laboratory

On 08/11/2015 07:21 PM, Rafael Jacaúna wrote:

Hi all, Someone had already got the bug down and managed to solve? I've done the pass-by-step instructions for creating lite switch records, but this error remains. If anyone can and know how to solve, please give feedback. Thank you!

make: *\ No rule to make target |../reg_defines.h ', needed by| src / org / netfpga / backend / NFDeviceConsts.java'. Stop.

— Reply to this email directly or view it on GitHub https://github.com/cmlab/NetFPGA-1G-CML/issues/15.

rjacauna commented 9 years ago

Sucesso! Ifs running. Thais for all. Rafael

Em quinta-feira, 13 de agosto de 2015, david00 notifications@github.com escreveu:

Hello,

Are you trying to build the router GUI? If so, please perform the following steps:

  1. Run "make regs" from projects/reference_router_nf1_cml/hw/
  2. Run "make" from projects/reference_router_nf1_cml/sw/host/gui (check first that reg_defines.h exists in projects/reference_router_nf1_cml/sw/host/ from Step 1)

David Van Arnem Development Engineer Computer Measurement Laboratory

On 08/11/2015 07:21 PM, Rafael Jacaúna wrote:

Hi all, Someone had already got the bug down and managed to solve? I've done the pass-by-step instructions for creating lite switch records, but this error remains. If anyone can and know how to solve, please give feedback. Thank you!

make: *\ No rule to make target |../reg_defines.h ', needed by| src / org / netfpga / backend / NFDeviceConsts.java'. Stop.

— Reply to this email directly or view it on GitHub https://github.com/cmlab/NetFPGA-1G-CML/issues/15.

— Reply to this email directly or view it on GitHub https://github.com/cmlab/NetFPGA-1G-CML/issues/15#issuecomment-130762832 .

Enviado do Gmail para iPad

rjacauna commented 9 years ago

Guys, Someone already had the experience of getting synthesize the project " reference_nic_nfl_cml" without error, but when you run the loopback test it is not completed successfully? Another point: although I can configure IP interfaces, to connect a station in one of the doors, and setting it on the same network, do not get success in the ICMP test. I am unsure what to do! I am looking forward to some light at the end of the tunnel !!! ;-) Regards, Rafael Jacaúna

2015-08-14 14:57 GMT-03:00 david00 notifications@github.com:

Closed #15 https://github.com/cmlab/NetFPGA-1G-CML/issues/15.

— Reply to this email directly or view it on GitHub https://github.com/cmlab/NetFPGA-1G-CML/issues/15#event-382828214.

Atenciosamente, Rafael Jacaúna