search

cnlohr / tensigral_lamp

My PCB Tensegrity structure lamp.
MIT License
12 stars 0 forks source link

Hardware changes #1

Open cnlohr opened 4 years ago

cnlohr commented 4 years ago

(1) Consider switching to WS2813. (2) Remove AVR+accel. Maybe put accel on top edge with double center wires. (3) If keeping mic, add rest of circuit. (4) Make USB so left-handed cables can be used, i.e. it shouldn't dead end into the other corner. (5) BIGGER capacitors. (6) TODO: Check voltage rails. (7) Center cable should not be through-hole + make double-sided. (8) Make opmode voltage slightly higher. It's roughly 3.45 v now. Should be more like 3.6 (9) Can we use a smaller inductor?

cnlohr commented 4 years ago

I think the bottom support should be what drifts back + Consider adding I2C to staff and having two support wires in the center. they keep breaking