search

codebndr / Ariadne-Bootloader

A little less unfinished TFTP bootloader for Arduino Ethernet or Arduino with Ethernet Shield
codebender.cc
97 stars 37 forks source link

getting error when flashing with tftp #35

Closed flintec closed 7 years ago

flintec commented 8 years ago

i get a error from the arduino when im flashing using the tftp client take a look at this. this is the output fom the serial port.

ˆC¡*¥¹é Ariadne for Arduino Uno, Version 0.5 Net: EEPROM settings Net: Address: 0xC0.0xA8.0x01.0x78 Net: Subnet: 0xFF.0xFF.0xFF.0x00 Net: Gateway: 0xC0.0xA8.0x01.0x01 Net: MAC: 0x12.0x34.0x56.0x78.0x9A.0xBC Net: Network init done Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001E Tftp: Set up return address Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012 Tftp: Write request Tftp: Init socket to port 0xB779 Tftp: Changed to port 0xB779 Tftp: Sent ACK Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001E Tftp: Set up return address Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012 Tftp: Write request Tftp: Init socket to port 0xB779 Tftp: Changed to port 0xB779 Tftp: Sent ACK Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001F Tftp: Set up return address Tftp: This is block 0x0000 with opcode 0x0005 and data length 0x0013 Tftp: Error Tftp: Response sent Tftp: Processing packet of size 0x8613 Tftp: Overflow Tftp: Set up return address Tftp: This is block 0x979A with opcode 0x6D2C and data length 0xBCD4 Tftp: Invalid opcode 0x0000 Tftp: Init socket to port 0xB779 Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779

any ideas?

Whocareswhowins commented 8 years ago

Closing down so no ideas

Sent from my iPhone 4s!

On 21 Oct 2016, at 09:24, flintec notifications@github.com wrote:

i get a error from the arduino when im flashing using the tftp client take a look at this. this is the output fom the serial port.

ˆC¡*¥¹é Ariadne for Arduino Uno, Version 0.5 Net: EEPROM settings Net: Address: 0xC0.0xA8.0x01.0x78 Net: Subnet: 0xFF.0xFF.0xFF.0x00 Net: Gateway: 0xC0.0xA8.0x01.0x01 Net: MAC: 0x12.0x34.0x56.0x78.0x9A.0xBC Net: Network init done Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001E Tftp: Set up return address Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012 Tftp: Write request Tftp: Init socket to port 0xB779 Tftp: Changed to port 0xB779 Tftp: Sent ACK Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001E Tftp: Set up return address Tftp: This is block 0x426C with opcode 0x0002 and data length 0x0012 Tftp: Write request Tftp: Init socket to port 0xB779 Tftp: Changed to port 0xB779 Tftp: Sent ACK Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779 Tftp: Processing packet of size 0x001F Tftp: Set up return address Tftp: This is block 0x0000 with opcode 0x0005 and data length 0x0013 Tftp: Error Tftp: Response sent Tftp: Processing packet of size 0x8613 Tftp: Overflow Tftp: Set up return address Tftp: This is block 0x979A with opcode 0x6D2C and data length 0xBCD4 Tftp: Invalid opcode 0x0000 Tftp: Init socket to port 0xB779 Tftp: Response sent Tftp: Init socket to port 0x0045 Tftp: TFTP server init done Tftp: DataPort: 0xB779

any ideas?

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

loathingKernel commented 7 years ago

This issue was moved to LoathingKernel/Ariadne-Bootloader#19