After few Hours stop Working

milandzuris commented 7 months ago

System Health details

*

Checklist

[X] I have enabled debug logging for my installation.
[X] I have filled out the issue template to the best of my ability.
[X] This issue only contains 1 issue (if you have multiple issues, open one issue for each issue).
[X] This issue is not a duplicate issue of any previous issues..

Describe the issue

After few Hours stop Working Lock i'm trying Unlock/Lock and nothing, only help me remove battery from Lock. Sometimes after few minutes, or Lock State is not Sync with HA, Lock is Locked and i'm click UnLock (IRL Lock start Locking even when it is Locked and hear the engine sputter), where is the problem in Lock or Integration?, i think in integration from phone i don't have any issues.

Lock is front of ESP.

Reproduction steps

*

Debug logs

[02:22:02][I][bluetooth_proxy:282]: [0] [7A:7A:46:44:77:44] Connecting v3 without cache
[02:22:02][D][esp32_ble_tracker:215]: Pausing scan to make connection...
[02:22:02][I][esp32_ble_client:069]: [0] [7A:7A:46:44:77:44] 0x00 Attempting BLE connection
[02:22:03][D][esp-idf:000]: W (43157) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e

[02:22:04][D][esp-idf:000]: W (44173) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e

[02:22:07][D][esp-idf:000]: W (47207) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e

[02:22:07][D][esp-idf:000]: W (47551) BT_APPL: gattc_conn_cb: if=3 st=0 id=3 rsn=0x3e

[02:22:07][D][esp-idf:000]: W (47556) BT_APPL: gattc_conn_cb: if=4 st=0 id=4 rsn=0x3e

[02:22:07][D][esp-idf:000]: W (47558) BT_APPL: gattc_conn_cb: if=5 st=0 id=5 rsn=0x3e

[02:22:07][D][esp-idf:000]: W (47562) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e

[02:22:07][W][esp32_ble_client:139]: [0] [] Connection failed, status=133

Diagnostics dump

No response

codyc1515 commented 7 months ago

Possible duplicate of #9

codyc1515 commented 4 months ago

Where are the debug logs for Yeelock from HA?

Per here, it looks like this is either a range or interference issue.

milandzuris commented 4 months ago

Where are the debug logs for Yeelock from HA?

Per here, it looks like this is either a range or interference issue.

Range is Very good

home-assistant_yeelock_2024-04-30T20-29-53.414Z.log

codyc1515 / ha-yeelock