search

codyc1515 / homebridge-panasonic-air-conditioner

Panasonic Air Conditioner / Heat Pump plugin for HomeBridge using the Panasonic Comfort Cloud API to expose Panasonic Air Conditioners to Apples HomeKit
MIT License
34 stars 13 forks source link

Unknown SwingMode state 2 #27

Closed ursusHU closed 4 years ago

ursusHU commented 4 years ago

Since the last update one of my AC's throwing the following error:

      1. 8:38:49 [Bedroom Air Conditioner] Unknown SwingMode state 2
      1. 8:48:49 [Bedroom Air Conditioner] Unknown SwingMode state 2
      1. 8:58:49 [Bedroom Air Conditioner] Unknown SwingMode state 2
      1. 9:08:49 [Bedroom Air Conditioner] Unknown SwingMode state 2

I have the same AC in another room, which works fine, where the swing setting is set to forward and straight. In this case the Swing setting is up/down auto, and left side is set to right and right side to forward.

efipso commented 4 years ago

I have the same message, and also 'Unknown Temperature State 126 126':

[2020-6-4 6:52:47] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 6:52:47] [Panasonic AC] Unknown SwingMode state 2 [2020-6-4 7:02:47] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 7:02:47] [Panasonic AC] Unknown SwingMode state 2 [2020-6-4 7:12:47] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 7:12:47] [Panasonic AC] Unknown SwingMode state 2 [2020-6-4 7:22:48] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 7:22:48] [Panasonic AC] Unknown SwingMode state 2 [2020-6-4 7:32:48] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 7:32:48] [Panasonic AC] Unknown SwingMode state 2 [2020-6-4 7:42:47] [Panasonic AC] Unknown Temperature state 126 126 [2020-6-4 7:42:47] [Panasonic AC] Unknown SwingMode state 2

Those messages doesn't appear when it's running, just when is switched off (standby)

ursusHU commented 4 years ago

The first message is definitely related to the directions, as soon as I turn it to auto mode it disappears. @codyc1515 If you want I can collect, and check all the possibilities and note the messages of your plugin.

codyc1515 commented 4 years ago

It’s all good.

The swing mode thing just means the Swing Enabled indicator won’t show correctly for now. I have developed a fix for this.

The temperature being 126 impacts nothing. It’s just some extra logging because the temperature always shows an invalid temperature at startup (126). I have turned down this logging now unless you have debug mode enabled.

There’s also an issue with the Eve / FakeGato recording. I’m testing a fix for this now too.

The fixes for these should be pushed out tomorrow if all my testing goes well.

efipso commented 4 years ago

Yes, doesn't have any effect on functionality, just have log lines every few minutes

Thanks!

codyc1515 commented 4 years ago

Sorted now. Thanks for the feedback. There is also FakeGato support now if you use the Eve app.