Closed NitramLegov closed 4 years ago
Bett Thermister ist defekt und ein neuer muss bestellt werden. @Pakue95 bestellt einen.
Ich glaube Erik braucht auch einen :)
From: Kim Almasan notifications@github.com Sent: Wednesday, February 12, 2020 8:38:17 PM To: comakingspace/do-something do-something@noreply.github.com Cc: NitramLegov Martin_Vogel@live.com; Author author@noreply.github.com Subject: Re: [comakingspace/do-something] P5 - Err: MINTEMP BED (#180)
Bett Thermister ist defekt und ein neuer muss bestellt werden. @Pakue95https://github.com/Pakue95 bestellt einen.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/comakingspace/do-something/issues/180?email_source=notifications&email_token=AB3SRC7C5656UDQZ5LOXMPTRCRF2TA5CNFSM4KSELMW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOELSDHSQ#issuecomment-585380810, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AB3SRC5X4KD4FO3DGH7L4JDRCRF2TANCNFSM4KSELMWQ.
JA Bitte!!!-- Diese Nachricht wurde von meinem Android Mobiltelefon mit WEB.DE Mail gesendet.Am 12.02.20, 21:43 schrieb NitramLegov notifications@github.com:
Ich glaube Erik braucht auch einen :)
From: Kim Almasan notifications@github.com Sent: Wednesday, February 12, 2020 8:38:17 PM To: comakingspace/do-something do-something@noreply.github.com Cc: NitramLegov Martin_Vogel@live.com; Author author@noreply.github.com Subject: Re: [comakingspace/do-something] P5 - Err: MINTEMP BED (#180)
Bett Thermister ist defekt und ein neuer muss bestellt werden. @Pakue95https://github.com/Pakue95 bestellt einen.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/comakingspace/do-something/issues/180?email_source=notifications&email_token=AB3SRC7C5656UDQZ5LOXMPTRCRF2TA5CNFSM4KSELMW2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOELSDHSQ#issuecomment-585380810, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AB3SRC5X4KD4FO3DGH7L4JDRCRF2TANCNFSM4KSELMWQ.
—You are receiving this because you are subscribed to this thread.Reply to this email directly, view it on GitHub, or unsubscribe.
Ich werde nächste Woche einen neuen Sensor bei Prusa bestellen.
@ErikSchatz: Über den Space kann ich dir leider keine privaten Ersatzteile bestellen, den musst du selbst ordern.
Die Sensoren sind angekommen und sind oben im 3D-Druck Regal deponiert.
Habe heute den neuen Sensor eingebaut und der Drucker funktioniert wieder. Sind dann noch 2 weitere Sensoren übrig.
P5 schmeißt aktuell den folgenden Fehler:
Der Fehler ist hier ganz gut beschrieben: https://help.prusa3d.com/article/am4dykf2rw-mintemp
Ich denke wir sollten den Fühler checken und falls er wirklich kaputt ist austauschen.
Es kann auch sein, dass einfach der Raum zu kalt ist. Allerdings sollte das in diesem Fall eigentlich auch für alle anderen Drucker gelten