search

commaai / opendbc

a Python API for your car
MIT License
1.96k stars 1.15k forks source link

Getting car unrecognized message on supported car #1141

Open kushal-joshi-sada opened 7 months ago

kushal-joshi-sada commented 7 months ago

Describe the bug

Comma3X displays "Dashcam Mode car unrecognized" intermittently. I would say around 50% of the time I turn on my vehicle this occurs. Alongside that when I remove the USB and plug the unit back in it syncs up fine.

Comma3X is hooked up to a fully supported car: Honda CRV 2019 EX

Which car does this affect?

Honda CRV 2019 EX

Provide a route where the issue occurs

4a76a1c956f48b33|2024-03-22-23-00-48

openpilot version

0.9.6

Additional info

No response

sshane commented 7 months ago

Can you plug the device in to constant power, or use your comma power? I don't see any of the non-fingerprinting routes uploaded. The only two are on March 19 and 22

kushal-joshi-sada commented 7 months ago

@sshane I have only been utilizing comma power with my device. Do I need to just keep it connected to my hotspot for a while for it to upload correctly? Thanks in advance.

kushal-joshi-sada commented 7 months ago

@sshane connected to another power source and let it upload. Validated on Comma Connect that Upload queue now shows no uploads Please let me know if you need me to take anymore action on my end! Cheers.

kushal-joshi-sada commented 7 months ago

Occurred again on route id: 4a76a1c956f48b33/2024-04-01--17-04-10/0

kushal-joshi-sada commented 7 months ago

![Uploading IMG_5773.jpeg…]()

Verylukyguy commented 7 months ago

I have been having a similar unresolved issue https://github.com/commaai/opendbc/issues/1093 Every other start up results in Dashcam Mode and I need to restart the vehicle.

sshane commented 7 months ago

I'll get to checking this out soon, currently busy with another project.

sshane commented 7 months ago

@mrkushaljoshi can you check out master and try again?

https://installer.comma.ai/commaai/master

kushal-joshi-sada commented 6 months ago

@sshane,

Went ahead and reset + reinstalled openpilot via https://installer.comma.ai/commaai/master. Issue persists about the same amount as before and now occasionally get 'Branch not tested' error on boot.

Plugging it back in when I get the error resolves is around 3/4 of the time, if I plug it in a second time I have had 100% success rate so far.

Let me know if there is anything else I can try!

sshane commented 6 months ago

I've only seen routes from release3, you need to try the branch link above and connect to WiFi so the logs can upload.

kushal-joshi-sada commented 6 months ago

@sshane,

Forgot to ping back here but the Comma3x was connected to Wi-Fi and logs updated! Let me know if you need anything else from my end!

sshane commented 5 months ago

Requested full log upload of a recent drive, please put it on WiFi again

haram-KONA commented 5 months ago

Requested full log upload of a recent drive, please put it on WiFi again

It seems to rarely appear these days. I think May 22nd was the last day it occurred. The route is "1618132d68afc876/0000001d--ade82d6865/0", but the log is not saved well.

These days, I almost give up and just turn it off and on when it happens and drive, but it doesn't seem to happen as frequently as it used to.

sshane commented 5 months ago

@mrkushaljoshi do you have any additional diagnostic devices in the car connected to the OBD2 port?

kushal-joshi-sada commented 5 months ago

@sshane only thing plugged into the ODB port is the Comma. Nothing else.