search

consulttelecom / ekahau-cisco-ap-name

Python script to add the names of access points into the Ekahau survey project file. Cisco WLC config file is used as the source of data about AP names.
MIT License
4 stars 0 forks source link

With ekahau-cisco-ap-name code #2

Closed tredinbaugh closed 10 months ago

tredinbaugh commented 10 months ago

I'm running the script add ap name.py and are having triuble with 9800 configuration and large Ekahau file i would like some help to see what i;m missing thanks for the help

Troy show_run_9800.txt Contact me if you have any thoughts Ekahau file it to large to upload

consulttelecom commented 10 months ago

@tredinbaugh, I have checked your config file, there are no problems with its parsing (see log message below). "The WLC config file is parsed, the number of BSSID-AP name pairs is 415" Could you please share your Ekahau file via other file sharing platforms to make complete test with your data? Thanks!

tredinbaugh commented 10 months ago

Roman, can you send me a link to upload the files as it very large file over 1 gig.

Thanks, again for looking into this!

Troy

From: Roman @.> Sent: Monday, October 30, 2023 5:05 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; Mention @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

@tredinbaughhttps://github.com/tredinbaugh, I have checked your config file, there are no problems with its parsing (see log message below). "The WLC config file is parsed, the number of BSSID-AP name pairs is 415" Could you please share your Ekahau file via other file sharing platforms to make complete test with your data? Thanks!

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#issuecomment-1784759809, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGVIWUKS6BLY3MV5VQDYB5UTRAVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBUG42TSOBQHE. You are receiving this because you were mentioned.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

consulttelecom commented 10 months ago

@tredinbaugh Troy, please share your email address with me to proceed. You can do it in private messages in LinkedIn to avoid exposing sensitive personal data.

tredinbaugh commented 10 months ago

Roman, You can use work email for this issue @.**@.>

Thanks Troy

From: Roman @.> Sent: Monday, October 30, 2023 9:38 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; Mention @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

@tredinbaughhttps://github.com/tredinbaugh Troy, please share your email address with me to proceed. You can do it in private messages in LinkedIn to avoid exposing sensitive personal data.

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#issuecomment-1785221300, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGTKL6DW7CZBVBSOP7DYB6UU3AVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBVGIZDCMZQGA. You are receiving this because you were mentioned.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

consulttelecom commented 10 months ago

@tredinbaugh , your work email is anonymized by Github and I could not see it here.

tredinbaugh commented 10 months ago

My email is troy.redinbaugh@wwt.com here is a log file I'm see also Ekahau.log Ekahau.log

Cmd line

add_ap_names.py show_run_9800 ANTHC Hospital Day-1d.esx

consulttelecom commented 10 months ago

I have shared the folder to upload data to your email, please check your inbox. Based on log file, the tool is getting "confused" by input arguments due to spaces in file name. Try to rename the project file from "ANTHC Hospital Day-1d.esx" to "ANTHC_Hospital_Day-1d.esx" and use the following cmd line: python add_ap_names.py show_run_9800.txt ANTHC_Hospital_Day-1d.esx

tredinbaugh commented 10 months ago

Output of tool

C:\Users\redinbat\AppData\Local\Programs\Python\Python39>cd C:\Users\redinbat\Desktop\Ekahau_tools

C:\Users\redinbat\Desktop\Ekahau_tools>add_ap_names.py show_run_9800 ANTHC_Hospital_Day-1d.esx Called the function to extract BSSIDs from config file C:\Users\redinbat\Desktop\Ekahau_tools\show_run_9800 Try to open file with name C:\Users\redinbat\Desktop\Ekahau_tools\show_run_9800 File error, please check the file name and folder are correct! WLC platform is not found in file, make sure that you used the correct file and filename The WLC config file is parsed, the number of BSSID-AP name pairs is 0 {} No BSSID found in supplied WLC config file

C:\Users\redinbat\Desktop\Ekahau_tools>

Thanks , I was trying to fine the link to upload the Ekahau file!

Troy

From: Roman @.> Sent: Monday, October 30, 2023 11:02 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; Mention @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

I have shared the folder to upload data to your email, please check your inbox. Based on log file, the tool is getting "confused" by input arguments due to spaces in file name. Try to rename the project file from "ANTHC Hospital Day-1d.esx" to "ANTHC_Hospital_Day-1d.esx" and use the following cmd line: python add_ap_names.py show_run_9800.txt ANTHC_Hospital_Day-1d.esx

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#issuecomment-1785411788, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGXVMZPO5I5T7FCDYH3YB66OFAVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBVGQYTCNZYHA. You are receiving this because you were mentioned.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

consulttelecom commented 10 months ago

"File error, please check the file name and folder are correct!" The config file that you shared previously had .txt extension. Try to use "show_run_9800.txt" as the second argument: "python add_ap_names.py show_run_9800.txt ANTHC_Hospital_Day-1d.esx"

tredinbaugh commented 10 months ago

The code working now thanks it was the syntax that was messed up

Troy

From: Roman @.> Sent: Monday, October 30, 2023 11:25 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; State change @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

"File error, please check the file name and folder are correct!" The config file that you shared previously had .txt extension. Try to use "show_run_9800.txt" as the second argument: "python add_ap_names.py show_run_9800.txt ANTHC_Hospital_Day-1d.esx"

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#issuecomment-1785458089, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGQAR76FVB5RUE5PKXTYB7BDDAVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBVGQ2TQMBYHE. You are receiving this because you modified the open/close state.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

consulttelecom commented 10 months ago

Glad to know that the issue is solved! Please consider adding star and spreading the word for useful tool.

tredinbaugh commented 10 months ago

Roman is possible you have one for Aruba Wireless Controllers that works the same ?

Thanks Troy

From: Roman @.> Sent: Monday, October 30, 2023 11:41 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; State change @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

Closed #2https://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2 as completed.

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#event-10809704347, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGXBFAXLWDF4YCSINVDYB7DAHAVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJQHAYDSNZQGQZTINY. You are receiving this because you modified the open/close state.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.

consulttelecom commented 10 months ago

Please share the example of full config for Aruba WLC, I will check how much effort is required.

tredinbaugh commented 10 months ago

Roman, I'm asking my other colleagues to see if they have one handy, I will let you know if I find one.

Troy

From: Roman @.> Sent: Tuesday, October 31, 2023 6:13 AM To: consulttelecom/ekahau-cisco-ap-name @.> Cc: Redinbaugh, Troy @.>; State change @.> Subject: [EXTERNAL] Re: [consulttelecom/ekahau-cisco-ap-name] With ekahau-cisco-ap-name code (Issue #2)

Please share the example of full config for Aruba WLC, I will check how much effort is required.

- Reply to this email directly, view it on GitHubhttps://github.com/consulttelecom/ekahau-cisco-ap-name/issues/2#issuecomment-1786907987, or unsubscribehttps://github.com/notifications/unsubscribe-auth/BDSJDGUF55I5NVNDKKFPAT3YCDFLBAVCNFSM6AAAAAA6THMIGCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTOOBWHEYDOOJYG4. You are receiving this because you modified the open/close state.Message ID: @.**@.>> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.