**Output of `buildah version`:**
Version: 1.15.1
Go Version: go1.14.7
Image Spec: 1.0.1-dev
Runtime Spec: 1.0.2-dev
CNI Spec: 0.4.0
libcni Version:
image Version: 5.5.1
Git Commit:
Built: Wed Dec 31 18:00:00 1969
OS/Arch: linux/amd64
**Output of `cat /etc/*release`:**
NAME="Red Hat Enterprise Linux"
VERSION="8.3 (Ootpa)"
ID="rhel"
ID_LIKE="fedora"
VERSION_ID="8.3"
PLATFORM_ID="platform:el8"
PRETTY_NAME="Red Hat Enterprise Linux 8.3 (Ootpa)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:redhat:enterprise_linux:8.3:GA"
HOME_URL="https://www.redhat.com/"
BUG_REPORT_URL="https://bugzilla.redhat.com/"
REDHAT_BUGZILLA_PRODUCT="Red Hat Enterprise Linux 8"
REDHAT_BUGZILLA_PRODUCT_VERSION=8.3
REDHAT_SUPPORT_PRODUCT="Red Hat Enterprise Linux"
REDHAT_SUPPORT_PRODUCT_VERSION="8.3"
Red Hat Enterprise Linux release 8.3 (Ootpa)
Red Hat Enterprise Linux release 8.3 (Ootpa)
**Output of `uname -a`:**
Linux founders.oakridge 4.18.0-240.1.1.el8_3.x86_64 #1 SMP Fri Oct 16 13:36:46 EDT 2020 x86_64 x86_64 x86_64 GNU/Linux
Output of cat /etc/containers/storage.conf:
# This file is is the configuration file for all tools
# that use the containers/storage library.
# See man 5 containers-storage.conf for more information
# The "container storage" table contains all of the server options.
[storage]
# Default Storage Driver
driver = "overlay"
# Temporary storage location
runroot = "/var/run/containers/storage"
# Primary Read/Write location of container storage
graphroot = "/var/lib/containers/storage"
# Storage path for rootless users
#
# rootless_storage_path = "$HOME/.local/share/containers/storage"
[storage.options]
# Storage options to be passed to underlying storage drivers
# AdditionalImageStores is used to pass paths to additional Read/Only image stores
# Must be comma separated list.
additionalimagestores = [
]
# Remap-UIDs/GIDs is the mapping from UIDs/GIDs as they should appear inside of
# a container, to the UIDs/GIDs as they should appear outside of the container,
# and the length of the range of UIDs/GIDs. Additional mapped sets can be
# listed and will be heeded by libraries, but there are limits to the number of
# mappings which the kernel will allow when you later attempt to run a
# container.
#
# remap-uids = 0:1668442479:65536
# remap-gids = 0:1668442479:65536
# Remap-User/Group is a user name which can be used to look up one or more UID/GID
# ranges in the /etc/subuid or /etc/subgid file. Mappings are set up starting
# with an in-container ID of 0 and then a host-level ID taken from the lowest
# range that matches the specified name, and using the length of that range.
# Additional ranges are then assigned, using the ranges which specify the
# lowest host-level IDs first, to the lowest not-yet-mapped in-container ID,
# until all of the entries have been used for maps.
#
# remap-user = "containers"
# remap-group = "containers"
# Root-auto-userns-user is a user name which can be used to look up one or more UID/GID
# ranges in the /etc/subuid and /etc/subgid file. These ranges will be partioned
# to containers configured to create automatically a user namespace. Containers
# configured to automatically create a user namespace can still overlap with containers
# having an explicit mapping set.
# This setting is ignored when running as rootless.
# root-auto-userns-user = "storage"
#
# Auto-userns-min-size is the minimum size for a user namespace created automatically.
# auto-userns-min-size=1024
#
# Auto-userns-max-size is the minimum size for a user namespace created automatically.
# auto-userns-max-size=65536
[storage.options.overlay]
# ignore_chown_errors can be set to allow a non privileged user running with
# a single UID within a user namespace to run containers. The user can pull
# and use any image even those with multiple uids. Note multiple UIDs will be
# squashed down to the default uid in the container. These images will have no
# separation between the users in the container. Only supported for the overlay
# and vfs drivers.
#ignore_chown_errors = "false"
# Path to an helper program to use for mounting the file system instead of mounting it
# directly.
#mount_program = "/usr/bin/fuse-overlayfs"
# mountopt specifies comma separated list of extra mount options
mountopt = "nodev,metacopy=on"
# Set to skip a PRIVATE bind mount on the storage home directory.
# skip_mount_home = "false"
# Size is used to set a maximum size of the container image.
# size = ""
[storage.options.thinpool]
# Storage Options for thinpool
# autoextend_percent determines the amount by which pool needs to be
# grown. This is specified in terms of % of pool size. So a value of 20 means
# that when threshold is hit, pool will be grown by 20% of existing
# pool size.
# autoextend_percent = "20"
# autoextend_threshold determines the pool extension threshold in terms
# of percentage of pool size. For example, if threshold is 60, that means when
# pool is 60% full, threshold has been hit.
# autoextend_threshold = "80"
# basesize specifies the size to use when creating the base device, which
# limits the size of images and containers.
# basesize = "10G"
# blocksize specifies a custom blocksize to use for the thin pool.
# blocksize="64k"
# directlvm_device specifies a custom block storage device to use for the
# thin pool. Required if you setup devicemapper.
# directlvm_device = ""
# directlvm_device_force wipes device even if device already has a filesystem.
# directlvm_device_force = "True"
# fs specifies the filesystem type to use for the base device.
# fs="xfs"
# log_level sets the log level of devicemapper.
# 0: LogLevelSuppress 0 (Default)
# 2: LogLevelFatal
# 3: LogLevelErr
# 4: LogLevelWarn
# 5: LogLevelNotice
# 6: LogLevelInfo
# 7: LogLevelDebug
# log_level = "7"
# min_free_space specifies the min free space percent in a thin pool require for
# new device creation to succeed. Valid values are from 0% - 99%.
# Value 0% disables
# min_free_space = "10%"
# mkfsarg specifies extra mkfs arguments to be used when creating the base
# device.
# mkfsarg = ""
# Size is used to set a maximum size of the container image.
# size = ""
# use_deferred_removal marks devicemapper block device for deferred removal.
# If the thinpool is in use when the driver attempts to remove it, the driver
# tells the kernel to remove it as soon as possible. Note this does not free
# up the disk space, use deferred deletion to fully remove the thinpool.
# use_deferred_removal = "True"
# use_deferred_deletion marks thinpool device for deferred deletion.
# If the device is busy when the driver attempts to delete it, the driver
# will attempt to delete device every 30 seconds until successful.
# If the program using the driver exits, the driver will continue attempting
# to cleanup the next time the driver is used. Deferred deletion permanently
# deletes the device and all data stored in device will be lost.
# use_deferred_deletion = "True"
# xfs_nospace_max_retries specifies the maximum number of retries XFS should
# attempt to complete IO when ENOSPC (no space) error is returned by
# underlying storage device.
# xfs_nospace_max_retries = "0"
Description
Steps to reproduce the issue: 1.Follow steps in [intro tutorial] (https://github.com/containers/buildah/blob/master/docs/tutorials/01-intro.md) until this step
Describe the results you received: cannot mount using driver overlay in rootless mode. You need to run it in a
buildah unshare
sessionDescribe the results you expected:
For the mount to be created properly -
Either alter the instructions accordingly for the unshare command, or refer to https://github.com/containers/buildah/blob/master/docs/buildah-mount.md
Output of
rpm -q buildah
orapt list buildah
:buildah-1.15.1-2.module+el8.3.0+8221+97165c3f.x86_64
NAME="Red Hat Enterprise Linux" VERSION="8.3 (Ootpa)" ID="rhel" ID_LIKE="fedora" VERSION_ID="8.3" PLATFORM_ID="platform:el8" PRETTY_NAME="Red Hat Enterprise Linux 8.3 (Ootpa)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:8.3:GA" HOME_URL="https://www.redhat.com/" BUG_REPORT_URL="https://bugzilla.redhat.com/"
REDHAT_BUGZILLA_PRODUCT="Red Hat Enterprise Linux 8" REDHAT_BUGZILLA_PRODUCT_VERSION=8.3 REDHAT_SUPPORT_PRODUCT="Red Hat Enterprise Linux" REDHAT_SUPPORT_PRODUCT_VERSION="8.3" Red Hat Enterprise Linux release 8.3 (Ootpa) Red Hat Enterprise Linux release 8.3 (Ootpa)
Linux founders.oakridge 4.18.0-240.1.1.el8_3.x86_64 #1 SMP Fri Oct 16 13:36:46 EDT 2020 x86_64 x86_64 x86_64 GNU/Linux
Output of
cat /etc/containers/storage.conf
: