search

coolio986 / Marlin_2.0.x_Anycubic_Chiron

GNU General Public License v3.0
55 stars 24 forks source link

Documentation update #4

Open data-toaster opened 4 years ago

data-toaster commented 4 years ago

Description

Documentation update

Additional Information

I think it's worth mentioning in the project's README that when compiling the sketch, if you don't have the TMCStepper library enabled in Arduino you will receive an error similar to TMCStepper.h missing.

Install the library via Tools -> Manage Libraries then filter by TMC, select TMCStepper and install it.

greensky7000 commented 4 years ago

Description

Documentation update

Additional Information

I think it's worth mentioning in the project's README that when compiling the sketch, if you don't have the TMCStepper library enabled in Arduino you will receive an error similar to TMCStepper.h missing.

Install the library via Tools -> Manage Libraries then filter by TMC, select TMCStepper and install it.

Really GOOD advice!

greensky7000 commented 4 years ago

Can't find the .hex file that you mentioned as

I provided three different precompiled hex files: One for no modifications on the stepper motor drivers - good for people who didn't touch anything yet, one for boards with TMC2208 installed and where the connectors have been flipped and one with TMC2208 and the connectors in original orientation.

Can't compile the project, when i follow

Download and install Arduino IDE Clone or download this repo Browse into the Marlin folder and run Marlin.ino In the IDE, under Tools -> Board select Genuino Mega 2560 and ATmega2560 Open Marlin.ino in the Marlin directory of this repo Customize if needed(e.g. motor directions and type at line 559 to 566 and line 857 to 865 in Configuration.h) In the IDE, select Tools -> Port and select the port. Click Upload,

Compile errors in Arduino IDE

  1. redefine Macros in pins_TRIGORILLA_14.h redefine HEATER_0_PIN in line 100 and 142 redefine HEATER_BED_PIN in line 102 and 146 so I delleted them.

  2. Can't find the right version library for TMC so I comment out the TMC2208 in configuration.h

  3. Compiler returns Error -1073740791 when linking. I tried on win10 and win8 in two different PC, same error in both.

Sorry for my poor english. Appreciate your project very much.