S0SL
commented
2 years ago 依赖没安装吧 curses configure: error: no enhanced curses library found; disable TUI
Open Destroy-God opened 2 years ago
S0SL
commented
2 years ago 依赖没安装吧 curses configure: error: no enhanced curses library found; disable TUI
Destroy-God
commented
2 years ago 谢谢，编译问题已经解决了，但是现在还有一个问题，就是使用MTK的HWNAT时wan状态好长一段时间都是未连接，要等一段时间才能用，这是为什么啊 内核日志在这里： [ 0.000000] Linux version 5.4.215 (runner@fv-az341-509) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r5209-758af54df)) #0 SMP Tue Oct 4 03:37:15 2022 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Xiaomi Mi Router 3G [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] On node 0 totalpages: 65536 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 14 pages/cpu s27184 r8192 d21968 u57344 [ 0.000000] pcpu-alloc: s27184 r8192 d21968 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000848 [ 0.000000] Readback ErrCtl register=00000848 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 249828K/262144K available (6378K kernel code, 273K rwdata, 1320K rodata, 1292K init, 236K bss, 12316K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns [ 0.007887] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.074058] pid_max: default: 32768 minimum: 301 [ 0.078856] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.086057] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.096892] rcu: Hierarchical SRCU implementation. [ 0.102376] smp: Bringing up secondary CPUs ... [ 1.254391] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 1.254402] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 1.254415] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 1.254520] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.167178] Synchronize counters for CPU 1: done. [ 2.563069] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 2.563078] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 2.563086] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 2.563140] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.258080] Synchronize counters for CPU 2: done. [ 2.327024] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 2.327033] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 2.327041] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 2.327101] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.343276] Synchronize counters for CPU 3: done. [ 0.373144] smp: Brought up 1 node, 4 CPUs [ 0.382061] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.391848] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.398884] pinctrl core: initialized pinctrl subsystem [ 0.406079] NET: Registered protocol family 16 [ 0.423888] FPU Affinity set after 11720 emulations [ 0.444267] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.455688] clocksource: Switched to clocksource GIC [ 0.462279] NET: Registered protocol family 2 [ 0.466927] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.475031] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.483390] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.491018] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.498100] TCP: Hash tables configured (established 2048 bind 2048) [ 0.504546] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.511027] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.518274] NET: Registered protocol family 1 [ 0.522566] PCI: CLS 0 bytes, default 32 [ 0.765615] 4 CPUs re-calibrate udelay(lpj = 2924544) [ 0.772363] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 0.791170] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.796965] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.810987] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.816898] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.822712] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.829201] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.837415] printk: console [ttyS0] disabled [ 0.841688] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.850698] printk: console [ttyS0] enabled [ 0.858958] printk: bootconsole [early0] disabled [ 0.870703] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 [ 0.878134] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1 [ 0.884454] nand: ESMT NAND 128MiB 3,3V 8-bit [ 0.888825] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.896381] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits [ 0.902902] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388 [ 0.910194] Scanning device for bad blocks [ 0.939941] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 0.947144] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 0.954327] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 3.032957] 10 fixed-partitions partitions found on MTD device mt7621-nand [ 3.039821] Creating 10 MTD partitions on "mt7621-nand": [ 3.045134] 0x000000000000-0x000000080000 : "Bootloader" [ 3.051883] 0x000000080000-0x0000000c0000 : "Config" [ 3.058389] 0x0000000c0000-0x000000100000 : "Bdata" [ 3.064583] 0x000000100000-0x000000140000 : "factory" [ 3.070999] 0x000000140000-0x000000180000 : "crash" [ 3.077406] 0x000000180000-0x0000001c0000 : "crash_syslog" [ 3.084223] 0x0000001c0000-0x000000200000 : "reserved0" [ 3.091035] 0x000000200000-0x000000600000 : "kernel_stock" [ 3.097950] 0x000000600000-0x000000a00000 : "kernel" [ 3.104493] 0x000000a00000-0x000007f80000 : "ubi" [ 3.115372] [mtk_hw_init] reset_lock:0, force:0 [ 3.119958] [mtk_hw_init] execute fe cold reset [ 3.136215] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.144058] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22 [ 3.152444] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 [ 3.162433] mt7621-pci 1e140000.pcie: Parsing DT failed [ 3.170684] NET: Registered protocol family 10 [ 3.176918] Segment Routing with IPv6 [ 3.180674] NET: Registered protocol family 17 [ 3.185192] Bridge firewalling registered [ 3.189556] 8021q: 802.1Q VLAN Support v1.8 [ 3.198178] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 3.223105] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] [ 3.233019] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] [ 3.242983] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] [ 3.253032] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 3.264170] DSA: tree 0 setup [ 3.267529] rt2880-pinmux pinctrl: pcie is already enabled [ 3.273151] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 3.280766] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 3.288232] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22 [ 3.395384] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 3.400965] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 3.506475] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 3.513408] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 3.518278] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 3.523138] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 3.532609] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 3.538991] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 3.545861] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 3.552705] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.558228] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 3.564240] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.570504] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 3.576838] pci 0000:00:00.0: supports D1 [ 3.580829] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.587014] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 3.593029] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.599314] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000ffff] [ 3.605613] pci 0000:00:01.0: supports D1 [ 3.609624] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 3.616969] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.624951] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 3.633190] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 [ 3.639258] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.645673] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 3.653349] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.658595] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 3.664662] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 3.671450] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref] [ 3.678667] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.685526] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000 [ 3.691601] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 3.698421] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 3.705198] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.712879] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 3.718124] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 3.724191] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff] [ 3.730968] pci 0000:00:01.0: bridge window [mem 0x00000000-0x000fffff pref] [ 3.738184] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 3.744819] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 3.751424] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.758378] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 3.764961] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.771915] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 3.778698] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 3.785912] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 3.792670] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 3.799890] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 3.806678] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 3.813437] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 3.820217] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 3.827005] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] [ 3.833765] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.838728] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 3.845486] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.852263] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 3.859489] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] [ 3.866800] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] [ 3.873989] pci 0000:00:01.0: PCI bridge to [bus 02] [ 3.878951] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 3.885730] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 3.892486] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 3.901145] UBI: auto-attach mtd9 [ 3.904472] ubi0: attaching mtd9 [ 3.917395] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 4.647913] UBI: EOF marker found, PEBs from 534 will be erased [ 4.654260] ubi0: scanning is finished [ 4.703604] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 384 LEBs [ 4.711261] ubi0: attached mtd9 (name "ubi", size 117 MiB) [ 4.716761] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 4.723600] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 4.730368] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 4.737308] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0 [ 4.743284] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 [ 4.750485] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1664854635 [ 4.759586] ubi0: available PEBs: 0, total reserved PEBs: 940, PEBs reserved for bad PEB handling: 20 [ 4.768802] ubi0: background thread "ubi_bgt0d" started, PID 491 [ 4.773418] block ubiblock0_0: created from ubi0:0(rootfs) [ 4.780314] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem [ 4.787283] hctosys: unable to open rtc device (rtc0) [ 4.813930] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. [ 4.826471] Freeing unused kernel memory: 1292K [ 4.831005] This architecture does not have kernel memory protection. [ 4.837453] Run /sbin/init as init process [ 6.160560] init: Console is alive [ 6.164334] init: - watchdog - [ 9.032881] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 9.586454] Key type encrypted registered [ 9.605201] usbcore: registered new interface driver usbfs [ 9.610811] usbcore: registered new interface driver hub [ 9.616236] usbcore: registered new device driver usb [ 9.623907] exfat: module is from the staging directory, the quality is unknown, you have been warned. [ 9.634912] exFAT: Version 1.3.0 [ 9.673980] SCSI subsystem initialized [ 9.688681] usbcore: registered new interface driver usb-storage [ 9.695454] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 9.706154] init: - preinit - [ 12.301988] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 12.310429] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 12.318905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.256921] random: jshn: uninitialized urandom read (4 bytes read) [ 13.334375] random: jshn: uninitialized urandom read (4 bytes read) [ 13.373718] random: jshn: uninitialized urandom read (4 bytes read) [ 17.037432] mount_root: loading kmods from internal overlay [ 17.100798] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 17.111073] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 17.888615] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 17.895889] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 17.903075] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 17.910118] blk_update_request: I/O error, dev mtdblock5, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 17.921011] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 17.928219] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 17.935402] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 17.942617] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 17.949658] blk_update_request: I/O error, dev mtdblock5, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 17.960543] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.0 [ 17.967751] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.1 [ 17.974934] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.2 [ 17.982139] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.3 [ 17.989180] blk_update_request: I/O error, dev mtdblock5, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 [ 18.000151] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.0 [ 18.007360] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.1 [ 18.014543] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.2 [ 18.021748] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.3 [ 18.028789] blk_update_request: I/O error, dev mtdblock5, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 18.040661] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 18.047943] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 18.055128] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 18.062172] blk_update_request: I/O error, dev mtdblock5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 18.072504] Buffer I/O error on dev mtdblock5, logical block 0, async page read [ 18.080878] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.0 [ 18.088106] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.1 [ 18.095293] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.2 [ 18.102493] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.3 [ 18.109534] blk_update_request: I/O error, dev mtdblock5, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 [ 18.120525] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.0 [ 18.127729] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.1 [ 18.134914] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.2 [ 18.142113] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.3 [ 18.149150] blk_update_request: I/O error, dev mtdblock5, sector 40 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 0 [ 18.168482] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 18.175708] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 18.182894] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 18.190094] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 18.197137] blk_update_request: I/O error, dev mtdblock5, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 18.207454] Buffer I/O error on dev mtdblock5, logical block 1, async page read [ 18.416893] block: attempting to load /etc/config/fstab [ 18.425910] block: unable to load configuration (fstab: Entry not found) [ 18.432796] block: no usable configuration [ 18.452950] UBIFS (ubi0:1): default file-system created [ 18.459647] UBIFS (ubi0:1): Mounting in unauthenticated mode [ 18.465570] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 669 [ 18.599319] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" [ 18.607180] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 18.617081] UBIFS (ubi0:1): FS size: 47489024 bytes (45 MiB, 374 LEBs), journal size 2412544 bytes (2 MiB, 19 LEBs) [ 18.627480] UBIFS (ubi0:1): reserved for root: 2243023 bytes (2190 KiB) [ 18.634067] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID EAF2B8B2-8754-4054-8947-114D57EC9091, small LPT model [ 18.840436] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 18.847702] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 18.854887] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 18.861954] blk_update_request: I/O error, dev mtdblock5, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 18.872841] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 18.880041] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 18.887239] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 18.894424] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 18.901455] blk_update_request: I/O error, dev mtdblock5, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 18.912340] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.0 [ 18.919540] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.1 [ 18.926738] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.2 [ 18.933923] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.3 [ 18.941170] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.0 [ 18.948369] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.1 [ 18.955552] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.2 [ 18.962749] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.3 [ 18.970906] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 18.978106] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 18.985290] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 18.992324] Buffer I/O error on dev mtdblock5, logical block 0, async page read [ 19.000537] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.0 [ 19.007778] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.1 [ 19.014965] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.2 [ 19.022190] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.3 [ 19.029455] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.0 [ 19.036656] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.1 [ 19.043839] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.2 [ 19.051039] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.3 [ 19.066647] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 19.073835] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 19.081034] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 19.088235] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 19.095258] Buffer I/O error on dev mtdblock5, logical block 1, async page read [ 19.312699] block: attempting to load /etc/config/fstab [ 19.318182] block: unable to load configuration (fstab: Entry not found) [ 19.325003] block: no usable configuration [ 19.331544] mount_root: overlay filesystem has not been fully initialized yet [ 19.339524] mount_root: switching to ubifs overlay [ 19.358608] urandom-seed: Seed file not found (/etc/urandom.seed) [ 19.500622] procd: - early - [ 19.503741] procd: - watchdog - [ 20.236003] procd: - watchdog - [ 20.241648] procd: - ubus - [ 20.596400] random: ubusd: uninitialized urandom read (4 bytes read) [ 20.605168] random: ubusd: uninitialized urandom read (4 bytes read) [ 20.612129] random: ubusd: uninitialized urandom read (4 bytes read) [ 20.622663] procd: - init - [ 21.429797] kmodloader: loading kernel modules from /etc/modules.d/ [ 21.533357] NET: Registered protocol family 38 [ 21.564534] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com [ 21.584016] Key type dns_resolver registered [ 21.606873] RPC: Registered named UNIX socket transport module. [ 21.612808] RPC: Registered udp transport module. [ 21.617558] RPC: Registered tcp transport module. [ 21.622244] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 21.642245] ntfs3: Max link count 4000 [ 21.646031] ntfs3: Enabled Linux POSIX ACLs support [ 21.650881] ntfs3: Read-only LZX/Xpress compression included [ 21.668933] NET: Registered protocol family 15 [ 21.677915] Initializing XFRM netlink socket [ 21.718746] tun: Universal TUN/TAP device driver, 1.6 [ 21.747830] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 21.773851] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 21.830687] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.855305] NFS: Registering the id_resolver key type [ 21.860728] Key type id_resolver registered [ 21.864945] Key type id_legacy registered [ 21.989929] cryptodev: driver 1.12 loaded. [ 22.003477] mediatek_soc_hnat 1e100000.hnat: wan = wan [ 22.008721] mediatek_soc_hnat 1e100000.hnat: lan = lan [ 22.013908] mediatek_soc_hnat 1e100000.hnat: ppd = lan [ 22.019134] mediatek_soc_hnat 1e100000.hnat: gmac num = 1 [ 22.024526] mediatek_soc_hnat 1e100000.hnat: wan dsa port = 4 [ 22.030268] mediatek_soc_hnat 1e100000.hnat: ppe num = 1 [ 22.036186] mediatek_soc_hnat 1e100000.hnat: ext devices = ra0 [ 22.042059] mediatek_soc_hnat 1e100000.hnat: ext devices = rai0 [ 22.048054] mediatek_soc_hnat 1e100000.hnat: ext devices = rax0 [ 22.053966] mediatek_soc_hnat 1e100000.hnat: ext devices = apcli0 [ 22.060073] mediatek_soc_hnat 1e100000.hnat: ext devices = apclii0 [ 22.066317] mediatek_soc_hnat 1e100000.hnat: ext devices = apclix0 [ 22.077110] mediatek_soc_hnat 1e100000.hnat: PPE0 entry number = 16384 [ 22.097485] mediatek_soc_hnat 1e100000.hnat: PPE0 hwnat start [ 22.103366] hnat roaming work enable [ 22.116357] fuse: init (API version 7.31) [ 22.137968] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace [ 22.145554] Backport generated by backports.git v5.15.33-1-0-g183c4ab2 [ 22.167263] mtk-eip93 1e004000.crypto: EIP93 Crypto Engine Initialized. [ 22.385234] usbcore: registered new interface driver ums-alauda [ 22.393882] usbcore: registered new interface driver ums-cypress [ 22.402684] usbcore: registered new interface driver ums-datafab [ 22.411331] usbcore: registered new interface driver ums-freecom [ 22.420028] usbcore: registered new interface driver ums-isd200 [ 22.428885] usbcore: registered new interface driver ums-jumpshot [ 22.437563] usbcore: registered new interface driver ums-karma [ 22.446911] usbcore: registered new interface driver ums-sddr09 [ 22.455584] usbcore: registered new interface driver ums-sddr55 [ 22.464687] usbcore: registered new interface driver ums-usbat [ 22.474076] usbcore: registered new interface driver usblp [ 22.523909] xt_time: kernel timezone is -0000 [ 22.647394] PPP generic driver version 2.4.2 [ 22.653601] PPP MPPE Compression module registered [ 22.660309] NET: Registered protocol family 24 [ 22.669596] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 22.677447] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 22.691563] kmodloader: done loading kernel modules from /etc/modules.d/ [ 24.034851] random: jshn: uninitialized urandom read (4 bytes read) [ 24.113298] random: jshn: uninitialized urandom read (4 bytes read) [ 24.153306] random: jshn: uninitialized urandom read (4 bytes read) [ 25.053957] random: dd: uninitialized urandom read (1 bytes read) [ 27.695687] random: crng init done [ 27.699097] random: 33 urandom warning(s) missed due to ratelimiting [ 35.075754] usb_vbus: disabling [ 56.280477] mtk_soc_eth 1e100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. [ 56.292690] mtk_soc_eth 1e100000.ethernet eth0: TX vlan offload cannot be enabled when dsa is attached. [ 92.450400] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 92.457658] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 92.465008] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 92.472091] print_req_error: 6 callbacks suppressed [ 92.472105] blk_update_request: I/O error, dev mtdblock5, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 92.487918] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 92.495204] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 92.502460] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 92.509774] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 92.516863] blk_update_request: I/O error, dev mtdblock5, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 0 [ 92.527911] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.0 [ 92.535188] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.1 [ 92.542489] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.2 [ 92.549791] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 772.3 [ 92.556895] blk_update_request: I/O error, dev mtdblock5, sector 16 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 0 [ 92.567965] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.0 [ 92.575242] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.1 [ 92.582510] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.2 [ 92.589799] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 774.3 [ 92.596889] blk_update_request: I/O error, dev mtdblock5, sector 24 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 92.608889] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.1 [ 92.616181] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.2 [ 92.623383] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 769.3 [ 92.630456] blk_update_request: I/O error, dev mtdblock5, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 92.640816] Buffer I/O error on dev mtdblock5, logical block 0, async page read [ 92.649260] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.0 [ 92.656663] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.1 [ 92.663943] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.2 [ 92.671334] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 776.3 [ 92.678431] blk_update_request: I/O error, dev mtdblock5, sector 32 op 0x0:(READ) flags 0x80700 phys_seg 8 prio class 0 [ 92.689485] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.0 [ 92.696894] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.1 [ 92.704199] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.2 [ 92.711573] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 778.3 [ 92.718665] blk_update_request: I/O error, dev mtdblock5, sector 40 op 0x0:(READ) flags 0x80700 phys_seg 7 prio class 0 [ 92.740161] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.0 [ 92.747473] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.1 [ 92.754881] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.2 [ 92.762238] mt7621-nand 1e003000.nand: Uncorrectable ECC error at page 770.3 [ 92.769335] blk_update_request: I/O error, dev mtdblock5, sector 8 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 92.779718] Buffer I/O error on dev mtdblock5, logical block 1, async page read [ 95.617054] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 95.658833] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 95.668057] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 95.670629] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 95.683763] 8021q: adding VLAN 0 to HW filter on device lan1 [ 95.692935] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 95.700786] br-lan: port 1(lan1) entered blocking state [ 95.706078] br-lan: port 1(lan1) entered disabled state [ 95.712766] device lan1 entered promiscuous mode [ 95.717450] device eth0 entered promiscuous mode [ 95.755077] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 95.762392] 8021q: adding VLAN 0 to HW filter on device lan2 [ 95.771956] br-lan: port 2(lan2) entered blocking state [ 95.777263] br-lan: port 2(lan2) entered disabled state [ 95.783919] device lan2 entered promiscuous mode [ 95.808496] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode [ 95.815753] 8021q: adding VLAN 0 to HW filter on device wan [ 99.316338] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 99.323855] br-lan: port 2(lan2) entered blocking state [ 99.329135] br-lan: port 2(lan2) entered forwarding state [ 99.337150] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 109.716464] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control off [ 109.727359] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready [ 127.469127] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 127.477127] NFSD: Using legacy client tracking operations. [ 127.482609] NFSD: starting 10-second grace period (net f00000a0) [ 260.356051] mt7530 mdio-bus:1f wan: Link is Down [ 262.436155] mt7530 mdio-bus:1f lan2: Link is Down [ 262.441106] br-lan: port 2(lan2) entered disabled state [ 276.996236] mt7530 mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 277.003756] br-lan: port 2(lan2) entered blocking state [ 277.009025] br-lan: port 2(lan2) entered forwarding state [ 295.716315] mt7530 mdio-bus:1f wan: Link is Up - 100Mbps/Full - flow control off
Destroy-God
commented
2 years ago 又发现一个问题，无线直接给干没了，就好像设备里根本就没有无线一样，什么错误也没有出现
xsj520
commented
2 years ago 没有无线的问题修复好了吗？
1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
2. 详细叙述
MT7621 小米R3G编译最新版出错，使用来自Mtk SDK的Hwnat驱动
(1) 具体问题
A：编译最新版出错
(2) 路由器型号和固件版本
A： 小米R3G
(3) 详细日志
u171785@s099-n018:~/lede$ make V=s -j1 WARNING: Makefile 'package/feeds/kenzo/luci-app-bypass/Makefile' has a dependency on 'luci-lib-ipkg', which does not exist make[1]: Entering directory '/home/u171785/lede' make[2]: Entering directory '/home/u171785/lede'
make[4]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1' make[5]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libiberty' make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libiberty/testsuite' make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libiberty/testsuite' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libiberty' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/intl' make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/intl' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/zlib' true "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-O2 -I/home/u171785/lede/staging_dir/host/include " "CXXFLAGS=-g -O2 " "CFLAGS_FOR_BUILD=-O2 -I/home/u171785/lede/staging_dir/host/include " "CFLAGS_FOR_TARGET=-g -O2 -minterlink-mips16" "INSTALL=/home/u171785/lede/staging_dir/host/bin/install -c" "INSTALL_DATA=/home/u171785/lede/staging_dir/host/bin/install -c -m 644" "INSTALL_PROGRAM=/home/u171785/lede/staging_dir/host/bin/install -c" "INSTALL_SCRIPT=/home/u171785/lede/staging_dir/host/bin/install -c" "LDFLAGS=-L/home/u171785/lede/staging_dir/host/lib " "LIBCFLAGS=-O2 -I/home/u171785/lede/staging_dir/host/include " "LIBCFLAGS_FOR_TARGET=-g -O2 -minterlink-mips16" "MAKE=make" "MAKEINFO=/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/missing makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICFLAG_FOR_TARGET=" "SHELL=/usr/bin/env bash" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl" "infodir=/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/share/info" "libdir=/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/lib" "prefix=/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl" "tooldir=/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/mipsel-openwrt-linux-musl" "AR=ar " "AS=as" "CC=gcc" "CXX=g++" "LD=ld" "LIBCFLAGS=-O2 -I/home/u171785/lede/staging_dir/host/include " "NM=nm" "PICFLAG=" "RANLIB=ranlib " "DESTDIR=" DO=all multi-do # make make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/zlib' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' Making info in po make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd/po' make[7]: Nothing to be done for 'info'. make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd/po' make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make[7]: Circular doc/bfd.stamp <- doc/bfd.texi dependency dropped. make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make all-recursive make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' Making all in po make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd/po' make[8]: Nothing to be done for 'all'. make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd/po' make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make[8]: Circular doc/bfd.stamp <- doc/bfd.texi dependency dropped. make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/bfd' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' make all-recursive make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' Making all in . make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' Making all in po make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes/po' make[8]: Nothing to be done for 'all'. make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes/po' make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/opcodes' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/etc' make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/etc' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libbacktrace' make all-am make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libbacktrace' true DO=all multi-do # make make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libbacktrace' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libbacktrace' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libdecnumber' make[6]: Nothing to be done for 'all'. make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/libdecnumber' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline' Making all in readline make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline/readline' make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline/readline' make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline' make[7]: Nothing to be done for 'all-am'. make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/readline' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' make all-recursive make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' Making all in import make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make all-recursive make[9]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make[10]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make[10]: Nothing to be done for 'all-am'. make[10]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make[9]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib/import' make[8]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' make[8]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gnulib' make[6]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gdbsupport' make all-am make[7]: Entering directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gdbsupport' make[7]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gdbsupport' make[6]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/gdbsupport' Configuring in ./gdb configure: loading cache ./config.cache checking whether to enable maintainer-specific portions of Makefiles... no checking for x86_64-pc-linux-gnu-gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /home/u171785/lede/staging_dir/host/bin/grep checking for egrep... /home/u171785/lede/staging_dir/host/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking whether it is safe to define EXTENSIONS... yes checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... mipsel-openwrt-linux-musl checking for dlfcn.h... yes checking for windows.h... no checking for library containing dlsym... -ldl checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking whether g++ supports C++11 features by default... yes checking dependency style of gcc... gcc3 checking whether NLS is requested... yes checking for catalogs to be installed... checking whether /home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/missing makeinfo --split-size=5000000 supports @click... yes checking for default auto-load directory... $debugdir:$datadir/auto-load checking for default auto-load safe-path... $debugdir:$datadir/auto-load checking size of void ... 8 checking pkg-config is at least version 0.9.0... yes checking whether to use debuginfod... auto checking for libdebuginfod >= 0.179... no configure: WARNING: libdebuginfod is missing or unusable; some features may be unavailable. checking libunwind-ia64.h usability... no checking libunwind-ia64.h presence... no checking for libunwind-ia64.h... no checking for monstartup... yes checking for _mcleanup... yes checking for _etext... yes checking for etext... yes checking for gawk... mawk checking for a BSD-compatible install... /home/u171785/lede/staging_dir/host/bin/install -c checking whether ln -s works... yes checking for x86_64-pc-linux-gnu-ranlib... ranlib checking for bison... bison -y checking for x86_64-pc-linux-gnu-ar... ar checking for x86_64-pc-linux-gnu-dlltool... dlltool checking for x86_64-pc-linux-gnu-windres... windres checking for main in -lm... yes checking for library containing gethostbyname... none required checking for library containing socketpair... none required checking for ld used by GCC... ld checking if the linker (ld) is GNU ld... yes checking for shared library run path origin... done checking for iconv... yes checking for iconv declaration... extern size_t iconv (iconv_t cd, char inbuf, size_t inbytesleft, char outbuf, size_t *outbytesleft); checking for library containing waddstr... no configure: error: no enhanced curses library found; disable TUI Makefile:11425: recipe for target 'configure-gdb' failed make[5]: [configure-gdb] Error 1 make[5]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1' Makefile:1001: recipe for target 'all' failed make[4]: [all] Error 2 make[4]: Leaving directory '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1' Makefile:73: recipe for target '/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/.built' failed make[3]: [/home/u171785/lede/build_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/gdb-12.1/.built] Error 2 make[3]: Leaving directory '/home/u171785/lede/toolchain/gdb' time: toolchain/gdb/compile#3.71#3.80#13.83 ERROR: toolchain/gdb failed to build. toolchain/Makefile:95: recipe for target 'toolchain/gdb/compile' failed make[2]: [toolchain/gdb/compile] Error 1 make[2]: Leaving directory '/home/u171785/lede' toolchain/Makefile:93: recipe for target '/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/stamp/.toolchain_compile' failed make[1]: [/home/u171785/lede/staging_dir/toolchain-mipsel_24kc_gcc-8.4.0_musl/stamp/.toolchain_compile] Error 2 make[1]: Leaving directory '/home/u171785/lede' /home/u171785/lede/include/toplevel.mk:228: recipe for target 'world' failed make: [world] Error 2