ufk119
commented
1 year ago 麻烦大佬帮忙看下，开机日志： [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 5.15.74 (runner@fv-az377-726) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r5343-10f2bed40) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP PREEMPT Sat Oct 29 13:33:49 2022 [ 0.000000] Machine model: FriendlyElec NanoPi R5S [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 8 MiB at 0x00000000ef000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s33432 r8192 d32104 u73728 [ 0.000000] pcpu-alloc: s33432 r8192 d32104 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: detected: Hardware dirty bit management [ 0.000000] alternatives: patching kernel code [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 967176 [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio32,0xfe660000 root=PARTUUID=5452574f-02 rw rootwait [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 3829924K/3930112K available (8704K kernel code, 2376K rwdata, 2468K rodata, 1664K init, 725K bss, 91996K reserved, 8192K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: MBI range [296:319] [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001384] Console: colour dummy device 80x25 [ 0.001873] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002925] pid_max: default: 32768 minimum: 301 [ 0.003625] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.004382] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.007523] rcu: Hierarchical SRCU implementation. [ 0.008278] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.009807] smp: Bringing up secondary CPUs ... [ 0.010982] Detected VIPT I-cache on CPU1 [ 0.011032] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.011092] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.011896] Detected VIPT I-cache on CPU2 [ 0.011934] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.011976] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.012739] Detected VIPT I-cache on CPU3 [ 0.012777] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.012816] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.012933] smp: Brought up 1 node, 4 CPUs [ 0.018534] SMP: Total of 4 processors activated. [ 0.019001] CPU features: detected: 32-bit EL0 Support [ 0.019523] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.020367] CPU features: detected: Common not Private translations [ 0.020983] CPU features: detected: CRC32 instructions [ 0.021488] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.022051] CPU features: detected: Privileged Access Never [ 0.022596] CPU features: detected: RAS Extension Support [ 0.023124] CPU features: detected: Hardware update of the Access flag [ 0.023802] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.024800] CPU: All CPU(s) started at EL2 [ 0.035594] KASLR disabled due to lack of seed [ 0.036222] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.037195] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.038275] pinctrl core: initialized pinctrl subsystem [ 0.039931] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.042405] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.043369] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.044423] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.046913] thermal_sys: Registered thermal governor 'step_wise' [ 0.046925] thermal_sys: Registered thermal governor 'power_allocator' [ 0.047921] cpuidle: using governor menu [ 0.049050] ASID allocator initialised with 65536 entries [ 0.049707] Serial: AMBA PL011 UART driver [ 0.071968] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.073164] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.074361] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.075532] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.076719] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.091924] cryptd: max_cpu_qlen set to 1000 [ 0.094646] vcc3v3_sys: supplied by vdd_5v [ 0.095635] vcc3v3_sysp: supplied by vdd_5v [ 0.096480] vcc5v0_sysp: supplied by vcc3v3_sysp [ 0.097584] vcc5v0_usb_host: supplied by vcc5v0_sysp [ 0.098533] vcc3v3_pcie: supplied by vcc3v3_sysp [ 0.099477] iommu: Default domain type: Translated [ 0.099962] iommu: DMA domain TLB invalidation policy: strict mode [ 0.101111] SCSI subsystem initialized [ 0.101690] usbcore: registered new interface driver usbfs [ 0.102302] usbcore: registered new interface driver hub [ 0.102869] usbcore: registered new device driver usb [ 0.104271] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.104988] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 0.107132] clocksource: Switched to clocksource arch_sys_counter [ 0.107993] VFS: Disk quotas dquot_6.6.0 [ 0.108443] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.113270] NET: Registered PF_INET protocol family [ 0.114078] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.117261] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.118154] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.118925] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.119997] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.121206] TCP: Hash tables configured (established 32768 bind 32768) [ 0.121979] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.122717] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.123710] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.124300] PCI: CLS 0 bytes, default 64 [ 0.130224] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.137401] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.137989] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.140534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.141490] io scheduler mq-deadline registered [ 0.148959] rockchip-snps-pcie3-phy fe8c0000.phy: failed to find rockchip,pipe_grf regmap [ 0.152093] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 0.152852] rockchip-dw-pcie 3c0000000.pcie: IO 0x033ef00000..0x033effffff -> 0x003ef00000 [ 0.153728] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033eefffff -> 0x0000000000 [ 0.154710] rockchip-dw-pcie 3c0000000.pcie: iATU unroll: enabled [ 0.155350] rockchip-dw-pcie 3c0000000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 0.363167] rockchip-dw-pcie 3c0000000.pcie: Link up [ 0.363784] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 0.364476] pci_bus 0000:00: root bus resource [bus 00-0f] [ 0.365025] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x3ef00000-0x3effffff]) [ 0.365964] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33eefffff] (bus address [0x00000000-0x3eefffff]) [ 0.367013] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 [ 0.367667] pci 0000:00:00.0: reg 0x38: [mem 0x300000000-0x30000ffff pref] [ 0.368416] pci 0000:00:00.0: supports D1 D2 [ 0.368841] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 0.373729] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 0.374949] pci 0000:01:00.0: [10ec:8125] type 00 class 0x020000 [ 0.375641] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 0.376338] pci 0000:01:00.0: reg 0x10: [io size 0x0100] [ 0.376955] pci 0000:01:00.0: reg 0x18: [mem 0x300000000-0x30000ffff 64bit] [ 0.377695] pci 0000:01:00.0: reg 0x20: [mem 0x300000000-0x300003fff 64bit] [ 0.378882] pci 0000:01:00.0: supports D1 D2 [ 0.379324] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395117] pci 0000:00:00.0: BAR 8: assigned [mem 0x300000000-0x3000fffff] [ 0.395817] pci 0000:00:00.0: BAR 6: assigned [mem 0x300100000-0x30010ffff pref] [ 0.396548] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 0.397158] pci 0000:01:00.0: BAR 2: assigned [mem 0x300000000-0x30000ffff 64bit] [ 0.397941] pci 0000:01:00.0: BAR 4: assigned [mem 0x300010000-0x300013fff 64bit] [ 0.398722] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 0.399364] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.399887] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 0.400489] pci 0000:00:00.0: bridge window [mem 0x300000000-0x3000fffff] [ 0.401284] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 [ 0.404250] phy phy-fe8c0000.phy.7: lane number 0, val 1 [ 0.404787] phy phy-fe8c0000.phy.7: lane number 1, val 2 [ 0.405313] phy phy-fe8c0000.phy.7: bifurcation enabled [ 0.405922] rockchip-dw-pcie 3c0400000.pcie: host bridge /pcie@fe270000 ranges: [ 0.406674] rockchip-dw-pcie 3c0400000.pcie: IO 0x037ef00000..0x037effffff -> 0x003ef00000 [ 0.407579] rockchip-dw-pcie 3c0400000.pcie: MEM 0x0340000000..0x037eefffff -> 0x0000000000 [ 0.418067] rockchip-dw-pcie 3c0400000.pcie: iATU unroll: enabled [ 0.418672] rockchip-dw-pcie 3c0400000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 0.627164] rockchip-dw-pcie 3c0400000.pcie: Link up [ 0.627785] rockchip-dw-pcie 3c0400000.pcie: PCI host bridge to bus 0001:00 [ 0.628475] pci_bus 0001:00: root bus resource [bus 00-0f] [ 0.629022] pci_bus 0001:00: root bus resource [io 0x100000-0x1fffff] (bus address [0x3ef00000-0x3effffff]) [ 0.629985] pci_bus 0001:00: root bus resource [mem 0x340000000-0x37eefffff] (bus address [0x00000000-0x3eefffff]) [ 0.631033] pci 0001:00:00.0: [1d87:3566] type 01 class 0x060400 [ 0.631683] pci 0001:00:00.0: reg 0x38: [mem 0x340000000-0x34000ffff pref] [ 0.632432] pci 0001:00:00.0: supports D1 D2 [ 0.632857] pci 0001:00:00.0: PME# supported from D0 D1 D3hot [ 0.637617] pci_bus 0001:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 0.638839] pci 0001:01:00.0: [10ec:8125] type 00 class 0x020000 [ 0.639534] pci 0001:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.640174] pci 0001:01:00.0: reg 0x18: [mem 0x340000000-0x34000ffff 64bit] [ 0.640914] pci 0001:01:00.0: reg 0x20: [mem 0x340000000-0x340003fff 64bit] [ 0.642102] pci 0001:01:00.0: supports D1 D2 [ 0.642527] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.659044] pci 0001:00:00.0: BAR 8: assigned [mem 0x340000000-0x3400fffff] [ 0.659767] pci 0001:00:00.0: BAR 6: assigned [mem 0x340100000-0x34010ffff pref] [ 0.660501] pci 0001:00:00.0: BAR 7: assigned [io 0x100000-0x100fff] [ 0.661146] pci 0001:01:00.0: BAR 2: assigned [mem 0x340000000-0x34000ffff 64bit] [ 0.661930] pci 0001:01:00.0: BAR 4: assigned [mem 0x340010000-0x340013fff 64bit] [ 0.662709] pci 0001:01:00.0: BAR 0: assigned [io 0x100000-0x1000ff] [ 0.663383] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.663906] pci 0001:00:00.0: bridge window [io 0x100000-0x100fff] [ 0.664542] pci 0001:00:00.0: bridge window [mem 0x340000000-0x3400fffff] [ 0.666852] pcieport 0001:00:00.0: PME: Signaling with IRQ 60 [ 0.667857] pcieport 0001:00:00.0: AER: enabled with IRQ 60 [ 0.674716] rockchip-dw-pcie 3c0800000.pcie: host bridge /pcie@fe280000 ranges: [ 0.675501] rockchip-dw-pcie 3c0800000.pcie: IO 0x03bef00000..0x03beffffff -> 0x003ef00000 [ 0.676383] rockchip-dw-pcie 3c0800000.pcie: MEM 0x0380000000..0x03beefffff -> 0x0000000000 [ 0.686916] rockchip-dw-pcie 3c0800000.pcie: iATU unroll: enabled [ 0.687539] rockchip-dw-pcie 3c0800000.pcie: Detected iATU regions: 8 outbound, 8 inbound [ 0.895163] rockchip-dw-pcie 3c0800000.pcie: Link up [ 0.895782] rockchip-dw-pcie 3c0800000.pcie: PCI host bridge to bus 0002:00 [ 0.896473] pci_bus 0002:00: root bus resource [bus 00-0f] [ 0.897021] pci_bus 0002:00: root bus resource [io 0x200000-0x2fffff] (bus address [0x3ef00000-0x3effffff]) [ 0.897985] pci_bus 0002:00: root bus resource [mem 0x380000000-0x3beefffff] (bus address [0x00000000-0x3eefffff]) [ 0.899036] pci 0002:00:00.0: [1d87:3566] type 01 class 0x060400 [ 0.899679] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff] [ 0.900308] pci 0002:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff] [ 0.900931] pci 0002:00:00.0: reg 0x38: [mem 0x380000000-0x38000ffff pref] [ 0.901677] pci 0002:00:00.0: supports D1 D2 [ 0.902101] pci 0002:00:00.0: PME# supported from D0 D1 D3hot [ 0.906861] pci_bus 0002:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 0.908119] pci 0002:01:00.0: [1e4b:1202] type 00 class 0x010802 [ 0.908819] pci 0002:01:00.0: reg 0x10: [mem 0x380000000-0x380003fff 64bit] [ 0.910130] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 0.910908] pci 0002:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 0.916395] pci 0002:00:00.0: BAR 0: no space for [mem size 0x40000000] [ 0.917055] pci 0002:00:00.0: BAR 0: failed to assign [mem size 0x40000000] [ 0.917743] pci 0002:00:00.0: BAR 1: no space for [mem size 0x40000000] [ 0.918395] pci 0002:00:00.0: BAR 1: failed to assign [mem size 0x40000000] [ 0.919082] pci 0002:00:00.0: BAR 8: assigned [mem 0x380000000-0x3800fffff] [ 0.919813] pci 0002:00:00.0: BAR 6: assigned [mem 0x380100000-0x38010ffff pref] [ 0.920553] pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x380003fff 64bit] [ 0.921338] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 0.921858] pci 0002:00:00.0: bridge window [mem 0x380000000-0x3800fffff] [ 0.924212] pcieport 0002:00:00.0: PME: Signaling with IRQ 61 [ 0.925181] pcieport 0002:00:00.0: AER: enabled with IRQ 61 [ 0.930988] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.931719] dma-pl330 fe530000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.934560] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330 [ 0.935285] dma-pl330 fe550000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 0.937161] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active. [ 0.939550] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.941666] printk: console [ttyS2] disabled [ 0.942155] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 38, base_baud = 1500000) is a 16550A [ 0.943319] printk: console [ttyS2] enabled [ 0.944103] printk: bootconsole [uart8250] disabled [ 0.947378] random: crng init done [ 0.947577] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.952255] loop: module loaded [ 0.952559] mtip32xx Version 1.3.1 [ 0.954214] nvme nvme0: pci function 0002:01:00.0 [ 0.954710] nvme 0002:01:00.0: enabling device (0000 -> 0002) [ 0.954953] SPI driver spidev has no spi_device_id for siliconlabs,si3210 [ 0.959454] rk_gmac-dwmac fe2a0000.ethernet: IRQ eth_lpi not found [ 0.960392] rk_gmac-dwmac fe2a0000.ethernet: no regulator found [ 0.960925] rk_gmac-dwmac fe2a0000.ethernet: clock input or output? (output). [ 0.961559] rk_gmac-dwmac fe2a0000.ethernet: TX delay(0x3c). [ 0.962063] rk_gmac-dwmac fe2a0000.ethernet: RX delay(0x2f). [ 0.962575] rk_gmac-dwmac fe2a0000.ethernet: integrated PHY? (no). [ 0.966874] nvme nvme0: missing or invalid SUBNQN field. [ 0.968204] rk_gmac-dwmac fe2a0000.ethernet: init for RGMII_ID [ 0.969165] rk_gmac-dwmac fe2a0000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 0.969808] rk_gmac-dwmac fe2a0000.ethernet: DWMAC4/5 [ 0.970267] rk_gmac-dwmac fe2a0000.ethernet: DMA HW capability register supported [ 0.970926] rk_gmac-dwmac fe2a0000.ethernet: RX Checksum Offload Engine supported [ 0.971572] nvme nvme0: allocated 16 MiB host memory buffer. [ 0.972103] rk_gmac-dwmac fe2a0000.ethernet: TX Checksum insertion supported [ 0.972726] rk_gmac-dwmac fe2a0000.ethernet: Wake-Up On Lan supported [ 0.973296] rk_gmac-dwmac fe2a0000.ethernet: TSO supported [ 0.973782] rk_gmac-dwmac fe2a0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.974494] rk_gmac-dwmac fe2a0000.ethernet: device MAC address 9a:54:cb:1d:3b:35 [ 0.975178] rk_gmac-dwmac fe2a0000.ethernet: Enabled RFS Flow TC (entries=8) [ 0.975806] rk_gmac-dwmac fe2a0000.ethernet: TSO feature enabled [ 0.976339] rk_gmac-dwmac fe2a0000.ethernet: Using 32 bits DMA width [ 0.993097] nvme nvme0: 4/0/0 default/read/poll queues [ 1.000209] nvme nvme0: Ignoring bogus Namespace Identifiers [ 1.002910] nvme0n1: p1 [ 1.070922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.071545] ehci-pci: EHCI PCI platform driver [ 1.072011] ehci-platform: EHCI generic platform driver [ 1.074803] ehci-platform fd800000.usb: EHCI Host Controller [ 1.075355] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1 [ 1.076183] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000 [ 1.091136] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 1.092247] hub 1-0:1.0: USB hub found [ 1.092622] hub 1-0:1.0: 1 port detected [ 1.095753] ehci-platform fd880000.usb: EHCI Host Controller [ 1.096275] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2 [ 1.097068] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000 [ 1.111136] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 1.112216] hub 2-0:1.0: USB hub found [ 1.112591] hub 2-0:1.0: 1 port detected [ 1.113650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.114227] ohci-platform: OHCI generic platform driver [ 1.114950] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 1.115608] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3 [ 1.116407] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000 [ 1.179651] hub 3-0:1.0: USB hub found [ 1.180027] hub 3-0:1.0: 1 port detected [ 1.181081] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 1.181693] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 1.182485] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000 [ 1.243610] hub 4-0:1.0: USB hub found [ 1.243987] hub 4-0:1.0: 1 port detected [ 1.245645] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.246155] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5 [ 1.246989] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010 [ 1.247917] xhci-hcd xhci-hcd.0.auto: irq 18, io mem 0xfcc00000 [ 1.248605] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.249104] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6 [ 1.249788] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.250886] hub 5-0:1.0: USB hub found [ 1.251296] hub 5-0:1.0: 1 port detected [ 1.252053] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.253236] hub 6-0:1.0: USB hub found [ 1.253617] hub 6-0:1.0: 1 port detected [ 1.254418] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.254926] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 1.255773] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000002002010010 [ 1.256650] xhci-hcd xhci-hcd.1.auto: irq 19, io mem 0xfd000000 [ 1.257333] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.257834] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8 [ 1.258519] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.259610] hub 7-0:1.0: USB hub found [ 1.259983] hub 7-0:1.0: 1 port detected [ 1.260722] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.261894] hub 8-0:1.0: USB hub found [ 1.262267] hub 8-0:1.0: 1 port detected [ 1.263164] usbcore: registered new interface driver usb-storage [ 1.263889] i2c_dev: i2c /dev entries driver [ 1.265513] fan53555-regulator 0-001c: FAN53555 Option[12] Rev[15] Detected! [ 1.266742] vdd_cpu: supplied by vcc3v3_sys [ 1.269558] rk808 0-0020: chip id: 0x8090 [ 1.284185] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 1.284764] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 1.285999] vdd_logic: supplied by vcc3v3_sys [ 1.288292] vdd_gpu: supplied by vcc3v3_sys [ 1.290211] vcc_ddr: supplied by vcc3v3_sys [ 1.292510] vdd_npu: supplied by vcc3v3_sys [ 1.293295] vcc_1v8: supplied by vcc3v3_sys [ 1.295245] vdda0v9_image: supplied by vcc3v3_sys [ 1.296078] vdda_0v9: supplied by vcc3v3_sys [ 1.298387] vdda0v9_pmu: supplied by vcc3v3_sys [ 1.300706] vccio_acodec: supplied by vcc3v3_sys [ 1.303222] vccio_sd: supplied by vcc3v3_sys [ 1.304165] vcc3v3_pmu: supplied by vcc3v3_sys [ 1.306500] vcca_1v8: supplied by vcc3v3_sys [ 1.308812] vcca1v8_pmu: supplied by vcc3v3_sys [ 1.311422] vcca1v8_image: supplied by vcc3v3_sys [ 1.312131] vcc_3v3: supplied by vcc3v3_sys [ 1.313318] vcc3v3_sd: supplied by vcc3v3_sys [ 1.318151] rk808-rtc rk808-rtc: registered as rtc0 [ 1.319425] rk808-rtc rk808-rtc: setting system clock to 2017-08-05T10:33:53 UTC (1501929233) [ 1.328282] sdhci: Secure Digital Host Controller Interface driver [ 1.328847] sdhci: Copyright(c) Pierre Ossman [ 1.329233] Synopsys Designware Multimedia Card Interface Driver [ 1.330156] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.331369] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 1.332074] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 1.332837] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 1.333369] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo [ 1.334367] ledtrig-cpu: registered to indicate activity on CPUs [ 1.335170] dwmmc_rockchip fe2b0000.mmc: Got CD GPIO [ 1.335257] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 1.336349] usbcore: registered new interface driver usbhid [ 1.336842] usbhid: USB HID core driver [ 1.338387] NET: Registered PF_INET6 protocol family [ 1.339757] Segment Routing with IPv6 [ 1.340105] In-situ OAM (IOAM) with IPv6 [ 1.340492] NET: Registered PF_PACKET protocol family [ 1.340980] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.342110] 8021q: 802.1Q VLAN Support v1.8 [ 1.349053] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 1.362217] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 1.363838] mmc1: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 1.364543] Waiting for root device PARTUUID=5452574f-02... [ 1.434485] mmc1: new HS200 MMC card at address 0001 [ 1.435774] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB [ 1.437828] mmcblk1: p1 p2 [ 1.438766] mmcblk1boot0: mmc1:0001 AJTD4R 4.00 MiB [ 1.440514] mmcblk1boot1: mmc1:0001 AJTD4R 4.00 MiB [ 1.441924] mmcblk1rpmb: mmc1:0001 AJTD4R 4.00 MiB, chardev (249:0) [ 1.446784] VFS: Mounted root (squashfs filesystem) readonly on device 179:2. [ 1.448337] Freeing unused kernel memory: 1664K [ 1.479193] Run /sbin/init as init process [ 1.479567] with arguments: [ 1.479570] /sbin/init [ 1.479572] with environment: [ 1.479574] HOME=/ [ 1.479577] TERM=linux [ 1.685276] init: Console is alive [ 2.309478] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 2.421909] Key type encrypted registered [ 2.424280] raid6: skip pq benchmark and using algorithm neonx8 [ 2.424816] raid6: using neon recovery algorithm [ 2.427729] xor: measuring software checksum speed [ 2.431415] 8regs : 3065 MB/sec [ 2.434233] 32regs : 4233 MB/sec [ 2.437241] arm64_neon : 3758 MB/sec [ 2.437625] xor: using function: 32regs (4233 MB/sec) [ 2.450095] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.454229] ehci-fsl: Freescale EHCI Host controller driver [ 2.456420] usbcore: registered new interface driver uas [ 2.457127] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.462258] init: - preinit - [ 6.266163] mount_root: loading kmods from internal overlay [ 6.280889] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.283952] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 6.378663] loop0: detected capacity change from 0 to 2097152 [ 6.395119] loop0: detected capacity change from 2097152 to 1764224 [ 6.396162] block: overlay filesystem in /dev/loop0 has not been formatted yet [ 6.658547] F2FS-fs (loop0): Found nat_bits in checkpoint [ 6.664874] F2FS-fs (loop0): Mounted with checkpoint version = 6044f695 [ 6.665658] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab [ 6.666483] block: unable to load configuration (fstab: Entry not found) [ 6.667166] block: attempting to load /tmp/f2fs_cfg/etc/config/fstab [ 6.667815] block: unable to load configuration (fstab: Entry not found) [ 6.668462] block: attempting to load /etc/config/fstab [ 6.671265] block: unable to load configuration (fstab: Entry not found) [ 6.671920] block: no usable configuration [ 6.695953] loop0: detected capacity change from 0 to 2097152 [ 6.723169] loop0: detected capacity change from 2097152 to 1764224 [ 6.725780] F2FS-fs (loop0): Found nat_bits in checkpoint [ 6.733544] F2FS-fs (loop0): Mounted with checkpoint version = 6044f697 [ 6.766515] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab [ 6.767227] block: unable to load configuration (fstab: Entry not found) [ 6.767852] block: attempting to load /tmp/f2fs_cfg/etc/config/fstab [ 6.768479] block: unable to load configuration (fstab: Entry not found) [ 6.769103] block: attempting to load /etc/config/fstab [ 6.769611] block: unable to load configuration (fstab: Entry not found) [ 6.770232] block: no usable configuration [ 6.771719] mount_root: overlay filesystem has not been fully initialized yet [ 6.773132] mount_root: switching to f2fs overlay [ 7.017657] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: (null). Quota mode: none. [ 7.076995] urandom-seed: Seed file not found (/etc/urandom.seed) [ 7.330476] procd: - early - [ 8.112853] procd: - ubus - [ 8.233871] procd: - init - [ 9.225506] kmodloader: loading kernel modules from /etc/modules.d/* [ 9.297660] NET: Registered PF_ALG protocol family [ 9.311269] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 9.316120] Key type dns_resolver registered [ 9.322536] Key type cifs.idmap registered [ 9.330044] RPC: Registered named UNIX socket transport module. [ 9.330581] RPC: Registered udp transport module. [ 9.330994] RPC: Registered tcp transport module. [ 9.331432] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.336214] ntfs3: Max link count 4000 [ 9.336564] ntfs3: Enabled Linux POSIX ACLs support [ 9.336993] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this [ 9.337696] ntfs3: Read-only LZX/Xpress compression included [ 9.342762] NET: Registered PF_KEY protocol family [ 9.344763] Initializing XFRM netlink socket [ 9.346628] tun: Universal TUN/TAP device driver, 1.6 [ 9.360518] l2tp_core: L2TP core driver, V2.0 [ 9.361650] l2tp_netlink: L2TP netlink interface [ 9.363055] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 9.377099] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 9.381697] NFS: Registering the id_resolver key type [ 9.382177] Key type id_resolver registered [ 9.382545] Key type id_legacy registered [ 9.411145] cryptodev: driver 1.12 loaded. [ 9.413080] GACT probability on [ 9.414020] Mirror/redirect action on [ 9.418684] u32 classifier [ 9.418941] input device check on [ 9.419310] Actions configured [ 9.425623] Simple TC action Loaded [ 9.438546] Bridge firewalling registered [ 9.439528] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace [ 9.440197] Backport generated by backports.git v5.15.33-1-0-g183c4ab2 [ 9.484990] appfilter version:5.0 [ 9.485339] open feature file failed [ 9.485654] error, feature buf is null [ 9.485983] load feature failed [ 9.534832] r8125 0000:01:00.0: of_irq_parse_pci: failed with rc=-22 [ 9.535438] r8125 2.5Gigabit Ethernet driver 9.009.02-NAPI-RSS loaded [ 9.536073] r8125 0000:01:00.0: enabling device (0000 -> 0003) [ 9.555734] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 9.556597] r8125 0000:01:00.0 (unnamed net_device) (uninitialized): Random ether addr 4a:ae:e0:81:60:a0 [ 9.558038] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 9.561063] r8125 Copyright (C) 2022 Realtek NIC software team nicfae@realtek.com [ 9.561063] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. [ 9.561063] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. [ 9.563886] r8125 2.5Gigabit Ethernet driver 9.009.02-NAPI-RSS loaded [ 9.564509] r8125 0001:01:00.0: enabling device (0000 -> 0003) [ 9.565569] r8125 0001:01:00.0: no MSI/MSI-X. Back to INTx. [ 9.582311] r8125 0001:01:00.0 (unnamed net_device) (uninitialized): Invalid ether addr 00:00:00:00:00:00 [ 9.583184] r8125 0001:01:00.0 (unnamed net_device) (uninitialized): Random ether addr 26:64:e3:95:a3:25 [ 9.584552] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 9.587652] r8125 Copyright (C) 2022 Realtek NIC software team nicfae@realtek.com [ 9.587652] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. [ 9.587652] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. [ 9.593241] usbcore: registered new interface driver ums-alauda [ 9.594192] usbcore: registered new interface driver ums-cypress [ 9.595200] usbcore: registered new interface driver ums-datafab [ 9.596148] usbcore: registered new interface driver ums-freecom [ 9.597110] usbcore: registered new interface driver ums-isd200 [ 9.598088] usbcore: registered new interface driver ums-jumpshot [ 9.599050] usbcore: registered new interface driver ums-karma [ 9.600096] usbcore: registered new interface driver ums-sddr09 [ 9.601102] usbcore: registered new interface driver ums-sddr55 [ 9.602098] usbcore: registered new interface driver ums-usbat [ 9.619140] xt_time: kernel timezone is -0000 [ 9.655271] PPP generic driver version 2.4.2 [ 9.656526] PPP MPPE Compression module registered [ 9.658138] NET: Registered PF_PPPOX protocol family [ 9.673971] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 9.674669] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 9.677332] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 9.684349] usbcore: registered new interface driver rt2800usb [ 9.687858] usbcore: registered new interface driver rtw_8821cu [ 9.697650] appfilter version:5.0 [ 9.698000] open feature file failed [ 9.698315] error, feature buf is null [ 9.698643] load feature failed [ 9.751873] kmodloader: 1 module could not be probed [ 9.752465] kmodloader: - oaf - 0 [ 31.711436] vdd_npu: disabling [ 31.712268] vdda0v9_image: disabling [ 31.713273] vcca1v8_image: disabling [ 38.830601] EXT4-fs (mmcblk1p1): mounted filesystem without journal. Opts: . Quota mode: none. [ 38.859911] EXT4-fs (nvme0n1p1): recovery complete [ 38.860761] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: . Quota mode: none. [ 39.659910] eth1: 0xffff800009e90000, 62:57:de:50:73:6b, IRQ 0 [ 39.707217] br-lan: port 1(eth1) entered blocking state [ 39.707708] br-lan: port 1(eth1) entered disabled state [ 39.708370] device eth1 entered promiscuous mode [ 39.715355] eth2: 0xffff800009d10000, 62:57:de:50:73:6b, IRQ 60 [ 39.772949] br-lan: port 2(eth2) entered blocking state [ 39.773431] br-lan: port 2(eth2) entered disabled state [ 39.774195] device eth2 entered promiscuous mode [ 39.779336] rk_gmac-dwmac fe2a0000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 39.871166] rk_gmac-dwmac fe2a0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=67) [ 39.879118] dwmac4: Master AXI performs any burst length [ 39.879622] rk_gmac-dwmac fe2a0000.ethernet eth0: No Safety Features support found [ 39.880311] rk_gmac-dwmac fe2a0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported [ 39.881411] rk_gmac-dwmac fe2a0000.ethernet eth0: configuring for phy/rgmii-id link mode [ 42.365283] rk_gmac-dwmac fe2a0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 42.366095] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 58.318038] overlayfs: filesystem on '/opt/check-overlayfs-support3741842495/upper' not supported as upperdir [ 58.337042] overlayfs: filesystem on '/opt/check-overlayfs-support2209529693/upper' not supported as upperdir [ 66.349991] appfilter version:5.0 [ 66.351463] init oaf sysctl...ok [ 84.205938] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 84.206666] NFSD: Using legacy client tracking operations. [ 84.207153] NFSD: starting 10-second grace period (net f0000000) [ 111.217787] r8125: eth2: link up [ 111.218155] br-lan: port 2(eth2) entered blocking state [ 111.218627] br-lan: port 2(eth2) entered forwarding state [ 111.219726] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
xiangfeidexiaohuo
iKenzo
qingtian110
1.友善R5S，使用内核5.15（具体目前是5.15.74）编译后，在插上内置nvme固态后LAN1不可用，不差nvme时LAN1工作正常！ 官方固件是可以正常使用的。已经重新编译以及重刷多次，问题依旧。