AndyLin2020
commented
1 year ago ASUS RT-ACRH17也一样
Open mitsukileung opened 1 year ago
AndyLin2020
commented
1 year ago ASUS RT-ACRH17也一样
Y-ZD-heheka
commented
1 year ago 7921＋1
xfmly
commented
1 year ago rac2v1k +1
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.242 (runner@fv-az246-371) (gcc version 11.3.0 (OpenWrt GCC 11.3.0 r5946-b6e9dac2c)) #0 SMP Sat May 6 03:29:11 2023
[ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: Askey RT4230W REV6
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 253952
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 57344 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 15 pages/cpu s30348 r8192 d22900 u61440
[ 0.000000] pcpu-alloc: s30348 r8192 d22900 u61440 alloc=15*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 252224
[ 0.000000] Kernel command line: rootfstype=squashfs noinitrd
[ 0.000000] Bootloader command line (ignored):
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 996172K/1015808K available (6447K kernel code, 198K rwdata, 1552K rodata, 1024K init, 231K bss, 19636K reserved, 0K cma-reserved, 229376K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[ 0.000006] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[ 0.000020] Switching to timer-based delay loop, resolution 160ns
[ 0.000343] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[ 0.000365] pid_max: default: 32768 minimum: 301
[ 0.000562] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000583] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001628] CPU: Testing write buffer coherency: ok
[ 0.002956] Setting up static identity map for 0x42300000 - 0x42300060
[ 0.003162] rcu: Hierarchical SRCU implementation.
[ 0.003745] smp: Bringing up secondary CPUs ...
[ 0.005743] smp: Brought up 1 node, 2 CPUs
[ 0.005756] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[ 0.005765] CPU: All CPU(s) started in SVC mode.
[ 0.017044] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[ 0.017204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017234] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.017390] pinctrl core: initialized pinctrl subsystem
[ 0.019062] NET: Registered protocol family 16
[ 0.019390] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.020825] cpuidle: using governor ladder
[ 0.020893] cpuidle: using governor menu
[ 0.056744] usbcore: registered new interface driver usbfs
[ 0.056827] usbcore: registered new interface driver hub
[ 0.056899] usbcore: registered new device driver usb
[ 0.056960] pps_core: LinuxPPS API ver. 1 registered
[ 0.056972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.057005] PTP clock support registered
[ 0.057855] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[ 0.059088] clocksource: Switched to clocksource dg_timer
[ 0.059977] thermal_sys: Registered thermal governor 'step_wise'
[ 0.062490] NET: Registered protocol family 2
[ 0.062746] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.063971] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.064020] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.064079] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.064172] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.064278] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.064318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.064603] NET: Registered protocol family 1
[ 0.064654] PCI: CLS 0 bytes, default 64
[ 0.066025] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.072712] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.072731] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.111737] bounce: pool size: 64 pages
[ 0.113565] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[ 0.113708] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[ 0.113810] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[ 0.114077] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
[ 0.114103] qcom-pcie 1b500000.pci: Parsing ranges property...
[ 0.114148] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[ 0.114185] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
[ 0.334750] qcom-pcie 1b500000.pci: Link up
[ 0.334913] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[ 0.334937] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.334955] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[ 0.334973] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[ 0.334990] pci_bus 0000:00: scanning bus
[ 0.335035] pci 0000:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.335205] pci 0000:00:00.0: supports D1
[ 0.335220] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 0.335240] pci 0000:00:00.0: PME# disabled
[ 0.339383] pci_bus 0000:00: fixups for bus
[ 0.339408] PCI: bus0: Fast back to back transfers disabled
[ 0.339427] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.339552] pci_bus 0000:01: scanning bus
[ 0.339730] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.340084] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.341227] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.341273] pci 0000:01:00.0: PME# disabled
[ 0.345452] pci_bus 0000:01: fixups for bus
[ 0.345523] PCI: bus1: Fast back to back transfers disabled
[ 0.345540] pci_bus 0000:01: bus scan returning with max=01
[ 0.345559] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.345575] pci_bus 0000:00: bus scan returning with max=ff
[ 0.345608] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[ 0.345632] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[ 0.345761] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.345787] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
[ 0.345986] pcieport 0000:00:00.0: assign IRQ: got 38
[ 0.346591] pcieport 0000:00:00.0: AER: enabled with IRQ 39
[ 0.347113] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[ 0.347240] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[ 0.347367] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[ 0.347627] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
[ 0.347650] qcom-pcie 1b700000.pci: Parsing ranges property...
[ 0.347687] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
[ 0.347722] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
[ 0.576486] qcom-pcie 1b700000.pci: Link up
[ 0.576629] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[ 0.576648] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.576665] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 0.576679] pci_bus 0001:00: scanning bus
[ 0.576715] pci 0001:00:00.0: [17cb:0101] type 01 class 0xff0000
[ 0.576858] pci 0001:00:00.0: supports D1
[ 0.576872] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 0.576889] pci 0001:00:00.0: PME# disabled
[ 0.580954] pci_bus 0001:00: fixups for bus
[ 0.580973] PCI: bus0: Fast back to back transfers disabled
[ 0.580992] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 0.581107] pci_bus 0001:01: scanning bus
[ 0.581294] pci 0001:01:00.0: [168c:0046] type 00 class 0x028000
[ 0.581671] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[ 0.582902] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.582950] pci 0001:01:00.0: PME# disabled
[ 0.583204] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
[ 0.587175] pci_bus 0001:01: fixups for bus
[ 0.587250] PCI: bus1: Fast back to back transfers disabled
[ 0.587265] pci_bus 0001:01: bus scan returning with max=01
[ 0.587282] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 0.587299] pci_bus 0001:00: bus scan returning with max=ff
[ 0.587328] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[ 0.587351] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[ 0.587483] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 0.587505] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
[ 0.587682] pcieport 0001:00:00.0: assign IRQ: got 40
[ 0.588545] pcieport 0001:00:00.0: AER: enabled with IRQ 41
[ 0.591359] L2 @ QSB rate. Forcing new rate.
[ 0.591584] L2 @ 384000 KHz
[ 0.591764] CPU0 @ 800000 KHz
[ 0.591780] CPU1 @ QSB rate. Forcing new rate.
[ 0.591911] CPU1 @ 384000 KHz
[ 0.595579] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[ 0.597098] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[ 0.598871] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.599834] msm_serial 16340000.serial: msm_serial: detected port #0
[ 0.599884] msm_serial 16340000.serial: uartclk = 7372800
[ 0.599955] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 42, base_baud = 460800) is a MSM
[ 0.599991] msm_serial: console setup on port #0
[ 1.385276] printk: console [ttyMSM0] enabled
[ 1.390307] msm_serial: driver initialized
[ 1.399454] loop: module loaded
[ 1.401063] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xaa
[ 1.401404] nand: AMD/Spansion S34MS02G2
[ 1.408001] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.412204] 21 fixed-partitions partitions found on MTD device qcom_nand.0
[ 1.419286] Creating 21 MTD partitions on "qcom_nand.0":
[ 1.426315] 0x000000000000-0x000000040000 : "0:SBL1"
[ 1.433183] 0x000000040000-0x000000180000 : "0:MIBIB"
[ 1.439738] 0x000000180000-0x0000002c0000 : "0:SBL2"
[ 1.444540] 0x0000002c0000-0x000000540000 : "0:SBL3"
[ 1.451752] 0x000000540000-0x000000660000 : "0:DDRCONFIG"
[ 1.454512] 0x000000660000-0x000000780000 : "0:SSD"
[ 1.459694] 0x000000780000-0x000000a00000 : "0:TZ"
[ 1.466550] 0x000000a00000-0x000000c80000 : "0:RPM"
[ 1.471622] 0x000000c80000-0x000001180000 : "0:APPSBL"
[ 1.480867] 0x000001180000-0x000001200000 : "0:APPSBLENV"
[ 1.482628] 0x000001200000-0x000001340000 : "0:ART"
[ 1.488189] 0x000001340000-0x0000013a0000 : "0:BOOTCONFIG"
[ 1.491548] 0x0000013a0000-0x0000014e0000 : "0:SBL2_1"
[ 1.498411] 0x0000014e0000-0x000001760000 : "0:SBL3_1"
[ 1.505792] 0x000001760000-0x000001880000 : "0:DDRCONFIG_1"
[ 1.508550] 0x000001880000-0x0000019a0000 : "0:SSD_1"
[ 1.514055] 0x0000019a0000-0x000001c20000 : "0:TZ_1"
[ 1.521499] 0x000001c20000-0x000001ea0000 : "0:RPM_1"
[ 1.526563] 0x000001ea0000-0x000001f00000 : "0:BOOTCONFIG1"
[ 1.528135] 0x000001f00000-0x000002400000 : "0:APPSBL_1"
[ 1.540986] 0x000002400000-0x00001c400000 : "ubi"
[ 1.541016] mtd: partition "ubi" extends beyond the end of device "qcom_nand.0" -- size truncated to 0xdc00000
[ 1.869634] random: crng init done
[ 1.908310] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.909440] spi-nor spi0.0: mr25h256 (32 Kbytes)
[ 1.937284] switch0: Atheros AR8337 rev. 2 switch registered on 37000000.mdio-mii
[ 2.777063] ar8327: qca,phy-rgmii-en is not specified
[ 2.778200] i2c /dev entries driver
[ 2.784761] sdhci: Secure Digital Host Controller Interface driver
[ 2.784789] sdhci: Copyright(c) Pierre Ossman
[ 2.790711] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.796795] NET: Registered protocol family 10
[ 2.802104] Segment Routing with IPv6
[ 2.805135] NET: Registered protocol family 17
[ 2.808886] Bridge firewalling registered
[ 2.813462] 8021q: 802.1Q VLAN Support v1.8
[ 2.817280] Registering SWP/SWPB emulation handler
[ 2.849660] qcom_rpm 108000.rpm: RPM firmware 3.0.16777377
[ 2.863401] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.863666] s1a: supplied by regulator-dummy
[ 2.867575] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.871967] s1b: supplied by regulator-dummy
[ 2.876763] s2a: Bringing 0uV into 775000-775000uV
[ 2.881196] s2a: supplied by regulator-dummy
[ 2.885621] s2b: Bringing 0uV into 775000-775000uV
[ 2.890204] s2b: supplied by regulator-dummy
[ 2.906090] UBI: auto-attach mtd20
[ 2.906112] ubi0: attaching mtd20
[ 4.502773] ubi0: scanning is finished
[ 4.512969] ubi0: attached mtd20 (name "ubi", size 220 MiB)
[ 4.512987] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.517335] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.524338] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.531208] ubi0: good PEBs: 1760, bad PEBs: 0, corrupted PEBs: 0
[ 4.537907] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[ 4.544237] ubi0: max/mean erase counter: 79/71, WL threshold: 4096, image sequence number: 1297316727
[ 4.551325] ubi0: available PEBs: 0, total reserved PEBs: 1760, PEBs reserved for bad PEB handling: 40
[ 4.560712] ubi0: background thread "ubi_bgt0d" started, PID 68
[ 4.561893] block ubiblock0_1: created from ubi0:1(rootfs)
[ 4.575668] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[ 4.581302] hctosys: unable to open rtc device (rtc0)
[ 4.591540] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
[ 4.592082] Freeing unused kernel memory: 1024K
[ 4.649878] Run /sbin/init as init process
[ 5.516573] init: Console is alive
[ 5.516867] init: - watchdog -
[ 5.519028] init: Watchdog has previously reset the system
[ 8.631143] kmodloader: loading kernel modules from /etc/modules-boot.d/
[ 8.760331] exfat: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.761231] exFAT: Version 1.3.0
[ 8.788972] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.792106] SCSI subsystem initialized
[ 8.798417] libata version 3.00 loaded.
[ 8.805717] fsl-ehci: Freescale EHCI Host controller driver
[ 8.806743] ehci-platform: EHCI generic platform driver
[ 8.816274] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 8.817132] ohci-platform: OHCI generic platform driver
[ 8.824307] dwc3-qcom 110f8800.usb3: IRQ hs_phy_irq not found
[ 8.826672] dwc3-qcom 110f8800.usb3: IRQ dp_hs_phy_irq not found
[ 8.832668] dwc3-qcom 110f8800.usb3: IRQ dm_hs_phy_irq not found
[ 8.838655] dwc3-qcom 110f8800.usb3: IRQ ss_phy_irq not found
[ 8.846824] dwc3-qcom 100f8800.usb3: IRQ hs_phy_irq not found
[ 8.850373] dwc3-qcom 100f8800.usb3: IRQ dp_hs_phy_irq not found
[ 8.856013] dwc3-qcom 100f8800.usb3: IRQ dm_hs_phy_irq not found
[ 8.862183] dwc3-qcom 100f8800.usb3: IRQ ss_phy_irq not found
[ 8.870647] dwc3 11000000.dwc3: Failed to get clk 'ref': -2
[ 8.928388] dwc3 10000000.dwc3: Failed to get clk 'ref': -2
[ 9.005719] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.005832] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 9.010524] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 9.017787] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x11000000
[ 9.027647] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 9.033063] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 9.038522] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 9.047537] hub 1-0:1.0: USB hub found
[ 9.052904] hub 1-0:1.0: 1 port detected
[ 9.057279] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.063910] hub 2-0:1.0: USB hub found
[ 9.068573] hub 2-0:1.0: 1 port detected
[ 9.072840] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.076187] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 9.081750] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000000002010010
[ 9.089067] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x10000000
[ 9.098728] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 9.104388] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 9.109915] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 9.118144] hub 3-0:1.0: USB hub found
[ 9.124131] hub 3-0:1.0: 1 port detected
[ 9.128123] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 9.132556] hub 4-0:1.0: USB hub found
[ 9.140024] hub 4-0:1.0: 1 port detected
[ 9.146209] usbcore: registered new interface driver usb-storage
[ 9.148393] usbcore: registered new interface driver uas
[ 9.153782] kmodloader: done loading kernel modules from /etc/modules-boot.d/
[ 9.162845] init: - preinit -
[ 16.935356] mount_root: loading kmods from internal overlay
[ 16.983205] kmodloader: loading kernel modules from //etc/modules-boot.d/
[ 16.993463] kmodloader: done loading kernel modules from //etc/modules-boot.d/
[ 17.456981] block: attempting to load /etc/config/fstab
[ 17.460976] block: unable to load configuration (fstab: Entry not found)
[ 17.461122] block: no usable configuration
[ 17.470138] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 17.472384] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 155
[ 17.544399] UBIFS (ubi0:2): recovery needed
[ 18.559999] UBIFS (ubi0:2): recovery completed
[ 18.560202] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 18.563346] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 18.571373] UBIFS (ubi0:2): FS size: 178147328 bytes (169 MiB, 1403 LEBs), journal size 8888320 bytes (8 MiB, 70 LEBs)
[ 18.581225] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
[ 18.591820] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID B93765C6-04C1-40E5-A467-B524AE0FEF0A, small LPT model
[ 18.716937] block: attempting to load /etc/config/fstab
[ 18.717039] block: unable to load configuration (fstab: Entry not found)
[ 18.721071] block: no usable configuration
[ 18.728861] mount_root: overlay filesystem has not been fully initialized yet
[ 18.733084] mount_root: switching to ubifs overlay
[ 18.775924] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 18.954136] procd: - early -
[ 18.954453] procd: - watchdog -
[ 18.956355] procd: Watchdog has previously reset the system
[ 19.884188] procd: - watchdog -
[ 19.884314] procd: Watchdog has previously reset the system
[ 19.889866] procd: - ubus -
[ 20.299942] procd: - init -
[ 21.141298] urngd: v1.0.2 started.
[ 21.167613] kmodloader: loading kernel modules from /etc/modules.d/*
[ 21.272429] NET: Registered protocol family 38
[ 21.283540] ntfs3: Max link count 4000
[ 21.283563] ntfs3: Enabled Linux POSIX ACLs support
[ 21.286172] ntfs3: Read-only LZX/Xpress compression included
[ 21.295493] NET: Registered protocol family 15
[ 21.298269] Initializing XFRM netlink socket
[ 21.302641] tun: Universal TUN/TAP device driver, 1.6
[ 21.309244] **
[ 21.310611] Driver :NSS GMAC Driver - RTL v(3.72a)
[ 21.316905] Version :1.0
[ 21.322085] * Copyright :Copyright (c) 2013-2018 The Linux Foundation. All rights reserved.
[ 21.325153] **
[ 21.421075] nss_driver - fw of size 536324 bytes copied to load addr: 40000000, nss_id : 0
[ 21.421653] nss_driver - Turbo Support 1
[ 21.428224] Supported Frequencies -
[ 21.428227] 800Mhz
[ 21.432454] 800Mhz
[ 21.435943] 800Mhz
[ 21.437765]
[ 21.442153] cc2641c1: meminfo init succeed
[ 21.454315] nss_driver - fw of size 218224 bytes copied to load addr: 40800000, nss_id : 1
[ 21.454604] 4a4600b9: meminfo init succeed
[ 21.461625] debugfs: File 'n2h' in directory 'stats' already present!
[ 21.465637] debugfs: File 'qrfs' in directory 'stats' already present!
[ 21.472237] debugfs: File 'c2c_tx' in directory 'stats' already present!
[ 21.472743] node size 1 # items 2
[ 21.478575] debugfs: File 'c2c_rx' in directory 'stats' already present!
[ 21.485504] memory: 0 0 (avl 1021140992) items 2 active_cores 2
[ 21.488635] debugfs: File 'unaligned' in directory 'stats' already present!
[ 21.495472] cc2641c1: nss core 0 booted successfully
[ 21.509728] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 21.510813] node size 1 # items 2
[ 21.516519] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 21.518868] memory: 0 0 (avl 1021140992) items 2 active_cores 2
[ 21.528760] 4a4600b9: nss core 1 booted successfully
[ 21.553556] cryptodev: driver 1.12 loaded.
[ 21.556805] PPP generic driver version 2.4.2
[ 21.557483] NET: Registered protocol family 24
[ 21.565010] QCA multicast snooping installed successfully
[ 21.567208]
btguigui
commented
1 year ago MobiPromo CM520-79F，更新后无线也挂了
zhdot
commented
1 year ago Linksys EA8500 也挂了
Y-ZD-heheka
commented
1 year ago 7921＋1
今天更新源码后7921、7922可以用了，但QCNFA765依然不能用
fengjiaqi927
commented
1 year ago mips mt7628dan has the same error on wireless
particlewong
commented
1 year ago 竞斗云也炸了，今天最新源码依旧无线不能用
zwillhill
commented
1 year ago 同k3，还以为是云编译改配置出问题了，刷了个四月份云编译版本，有无线，但是有线挂了
mitsukileung
commented
1 year ago 同k3，还以为是云编译改配置出问题了，刷了个四月份云编译版本，有无线，但是有线挂了
我的4月份有线没有问题
mitsukileung
commented
1 year ago ipq807x / Ax6 Ax3600
跳过这个PR https://github.com/coolsnowwolf/lede/commit/31673339464df901c9c5a70dcc8ba00953149ab1 可以顺利编译，并且WIFI正常了
fengqi
commented
1 year ago ipq807x / Ax6 Ax3600 跳过这个PR 3167333可以顺势编译，并且WIFI正常了
编译时 怎么跳过呢？
试试 git revert 31673339464df901c9c5a70dcc8ba00953149ab1
zhdot
commented
1 year ago ipq807x / Ax6 Ax3600 跳过这个PR 3167333可以顺势编译，并且WIFI正常了
编译时 怎么跳过呢？
试试
git revert 31673339464df901c9c5a70dcc8ba00953149ab1
error: could not revert 316733394... mac80211: update to v6.1.24
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add
报错了 小白一个 不知道怎么弄啊
taibei123
commented
1 year ago acrh17同样问题，不可用
fichenx
commented
1 year ago +1 5月4日编译时没问题，5月4日以后一直到现在编译的都没有无线
mitsukileung
commented
1 year ago 是不是这个patchhttps://github.com/coolsnowwolf/lede/commit/aa4e4dae343c785bbe3f65dfda32114af357cf74
不知道呀 回滚到 https://github.com/coolsnowwolf/lede/commit/26f3634631244eedfbdfd61ea6cc3a2d7f5d896f 这个PR就可以正常编译，无线正常，往后的就不行了
ddvcx
commented
1 year ago 同样问题
xiaiohuan
commented
1 year ago 昨天也遇到同样的问题 用以前的老版本源码编译现在直接报错无法编译 拉最新的编译 直接没无线
xiaiohuan
commented
1 year ago 目前解决了 退回源码 拉去最新源码 然后 cd lede 在 git checkout 26f3634631244eedfbdfd61ea6cc3a2d7f5d896f 在 git checkout -b 26f363463 切换就行了
xiaiohuan
commented
1 year ago 
WYC-2020
commented
1 year ago 哈哈可怜的孩子，因该是他们升级了mac80211 导致的，毕竟一下从5.15 升级到了6.1 很多机型肯定都还没测试自然会出现各种奇葩问题
mitsukileung
commented
1 year ago 想用新版可以用 immortalwrt 来编译，immortalwrt升级后没有无WIFI这样的问题 但SSRP无法科学上网，内存会用得更多
mitsukileung
commented
1 year ago 请尝试替换成官方提供的无线 fw: https://github.com/openwrt/firmware_qca-wireless/raw/main/board-redmi_ax6.ipq8074
好的，我试试
xiaiohuan
commented
1 year ago 想用新版可以用immortalwrt 来编，immortalwrt升级后没有无WIFI这种的问题 但是SSRP无法科学网上，内存会用得更多
我是过用他的编译完 刷了直接不启动
xiaiohuan
commented
1 year ago 试过替换后一样不行 510内核编译依然没无线 5.15内核编译 还是直接不启动
mitsukileung
commented
1 year ago 想用新版可以用immortalwrt 来编，immortalwrt升级后没有无WIFI这种的问题 但是SSRP无法科学网上，内存会用得更多
我是过用他的编译完 刷了直接不启动
用 xiaomi_ax3600-stock 和 redmi_ax6-stock 可以正常启动，建议用23.05。好像出了RC1了 但我用SSRP不知为何翻不了墙，用passwall 和 homeproxy 可以。就是内存掉得比较快
xiaiohuan
commented
1 year ago 开源源码 都吃内存 改了1G就没事了 edmi_ax6-stock xiaomi_ax3600-stock 的 库链接有不 发一个我看看
mitsukileung
commented
1 year ago 开源源码 都吃内存 改了1G就没事了 edmi_ax6-stock xiaomi_ax3600-stock 的 库链接有不 发一个我看看
https://github.com/immortalwrt/immortalwrt/tree/openwrt-23.05
fichenx
commented
1 year ago 快两个月了，这个问题修复了吗？
mitsukileung
commented
1 year ago 快两个月了，这个问题修复了吗？
不清楚，这段时间在用 immortalwrt
fengqi
commented
1 year ago 都是老机型大概率不会修复了，也没必要追新，用旧版吧。
M4TRIX04
commented
1 year ago 这个问题会解决吗？
重新拉库不带设置文件再编译出来的固件没有“无线”的选项。
系统日志：
Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] Wed May 17 13:25:26 2023 kern.notice kernel: [ 0.000000] Linux version 5.15.110 (koysuke@koysuke) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r5971-a6f1cc5b5) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed May 17 05:25:11 2023 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Machine model: Redmi AX6 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Zone ranges: Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] DMA32 empty Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Normal empty Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Movable zone start for each node Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Early memory node ranges Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a4fffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e8fffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] node 0: [mem 0x000000004e900000-0x000000005fffffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: probing for conduit method from DT. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: SMC Calling Convention v1.0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] psci: OSI mode supported. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] percpu: Embedded 17 pages/cpu s30424 r8192 d31016 u69632 Wed May 17 13:25:26 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: s30424 r8192 d31016 u69632 alloc=17*4096 Wed May 17 13:25:26 2023 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Detected VIPT I-cache on CPU0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 Wed May 17 13:25:26 2023 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Memory: 415648K/524288K available (7680K kernel code, 896K rwdata, 2032K rodata, 1216K init, 288K bss, 108640K reserved, 0K cma-reserved) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Tracing variant of Tasks RCU enabled. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] Root IRQ handler: gic_handle_irq Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000187] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000204] pid_max: default: 32768 minimum: 301 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000353] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.000369] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.002055] rcu: Hierarchical SRCU implementation. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.002234] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build Wed May 17 13:25:26 2023 kern.info kernel: [ 0.002721] smp: Bringing up secondary CPUs ... Wed May 17 13:25:26 2023 kern.info kernel: [ 0.003349] Detected VIPT I-cache on CPU1 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.003417] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004059] Detected VIPT I-cache on CPU2 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004100] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004703] Detected VIPT I-cache on CPU3 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004740] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004808] smp: Brought up 1 node, 4 CPUs Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004836] SMP: Total of 4 processors activated. Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004844] CPU features: detected: 32-bit EL0 Support Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004851] CPU features: detected: CRC32 instructions Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004904] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004914] CPU: All CPU(s) started at EL1 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.004936] alternatives: patching kernel code Wed May 17 13:25:26 2023 kern.info kernel: [ 0.011953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Wed May 17 13:25:26 2023 kern.info kernel: [ 0.011989] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.012151] pinctrl core: initialized pinctrl subsystem Wed May 17 13:25:26 2023 kern.info kernel: [ 0.013213] NET: Registered PF_NETLINK/PF_ROUTE protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 0.013708] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations Wed May 17 13:25:26 2023 kern.info kernel: [ 0.013753] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations Wed May 17 13:25:26 2023 kern.info kernel: [ 0.013791] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations Wed May 17 13:25:26 2023 kern.info kernel: [ 0.014134] thermal_sys: Registered thermal governor 'step_wise' Wed May 17 13:25:26 2023 kern.info kernel: [ 0.015471] cpuidle: using governor menu Wed May 17 13:25:26 2023 kern.info kernel: [ 0.015703] ASID allocator initialised with 65536 entries Wed May 17 13:25:26 2023 kern.info kernel: [ 0.068169] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.076792] cryptd: max_cpu_qlen set to 1000 Wed May 17 13:25:26 2023 kern.notice kernel: [ 0.080236] SCSI subsystem initialized Wed May 17 13:25:26 2023 kern.info kernel: [ 0.080424] usbcore: registered new interface driver usbfs Wed May 17 13:25:26 2023 kern.info kernel: [ 0.080471] usbcore: registered new interface driver hub Wed May 17 13:25:26 2023 kern.info kernel: [ 0.080510] usbcore: registered new device driver usb Wed May 17 13:25:26 2023 kern.info kernel: [ 0.080751] qcom_scm: convention: smc arm 64 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.081990] clocksource: Switched to clocksource arch_sys_counter Wed May 17 13:25:26 2023 kern.info kernel: [ 0.082681] NET: Registered PF_INET protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 0.082809] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083413] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083438] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083453] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083561] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083648] TCP: Hash tables configured (established 4096 bind 4096) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083733] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083763] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083921] NET: Registered PF_UNIX/PF_LOCAL protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 0.083957] PCI: CLS 0 bytes, default 64 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.090225] workingset: timestamp_bits=46 max_order=17 bucket_order=0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.094098] squashfs: version 4.0 (2009/01/31) Phillip Lougher Wed May 17 13:25:26 2023 kern.info kernel: [ 0.094117] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Wed May 17 13:25:26 2023 kern.err kernel: [ 0.153883] bam-dma-engine 704000.dma: num-channels unspecified in dt Wed May 17 13:25:26 2023 kern.err kernel: [ 0.153909] bam-dma-engine 704000.dma: num-ees unspecified in dt Wed May 17 13:25:26 2023 kern.info kernel: [ 0.157500] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Wed May 17 13:25:26 2023 kern.info kernel: [ 0.157967] msm_serial 78b3000.serial: msm_serial: detected port #0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.158000] msm_serial 78b3000.serial: uartclk = 3686400 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.158038] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM Wed May 17 13:25:26 2023 kern.info kernel: [ 0.158067] msm_serial: console setup on port #0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.762794] printk: console [ttyMSM0] enabled Wed May 17 13:25:26 2023 kern.info kernel: [ 0.767918] msm_serial: driver initialized Wed May 17 13:25:26 2023 kern.info kernel: [ 0.775837] loop: module loaded Wed May 17 13:25:26 2023 kern.info kernel: [ 0.777183] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.778750] nand: ESMT PSR1GA30DT Wed May 17 13:25:26 2023 kern.info kernel: [ 0.785359] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.789326] spmi spmi-0: PMIC arbiter version v2 (0x20010000) Wed May 17 13:25:26 2023 kern.info kernel: [ 0.796901] pmd9655_s3: supplied by regulator-dummy Wed May 17 13:25:26 2023 kern.info kernel: [ 0.802175] pmd9655_s4: supplied by regulator-dummy Wed May 17 13:25:26 2023 kern.info kernel: [ 0.806919] pmd9655_ldo11: supplied by regulator-dummy Wed May 17 13:25:26 2023 kern.info kernel: [ 0.824907] i2c_dev: i2c /dev entries driver Wed May 17 13:25:26 2023 kern.info kernel: [ 0.828428] sdhci: Secure Digital Host Controller Interface driver Wed May 17 13:25:26 2023 kern.info kernel: [ 0.828479] sdhci: Copyright(c) Pierre Ossman Wed May 17 13:25:26 2023 kern.info kernel: [ 0.834263] sdhci-pltfm: SDHCI platform and OF driver helper Wed May 17 13:25:26 2023 kern.info kernel: [ 0.839302] remoteproc remoteproc0: releasing cd00000.q6v5_wcss Wed May 17 13:25:26 2023 kern.info kernel: [ 0.845246] NET: Registered PF_INET6 protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 0.850856] Segment Routing with IPv6 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.855300] In-situ OAM (IOAM) with IPv6 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.858864] NET: Registered PF_PACKET protocol family Wed May 17 13:25:26 2023 kern.notice kernel: [ 0.862871] Bridge firewalling registered Wed May 17 13:25:26 2023 kern.info kernel: [ 0.867745] 8021q: 802.1Q VLAN Support v1.8 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.887405] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.887695] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.893705] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.900131] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.907803] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable Wed May 17 13:25:26 2023 kern.info kernel: [ 0.915315] cpr3_mem_acc_init: apc: not using memory accelerator regulator Wed May 17 13:25:26 2023 kern.info kernel: [ 0.924445] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 728000 uV Wed May 17 13:25:26 2023 kern.info kernel: [ 0.931385] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 864000 uV Wed May 17 13:25:26 2023 kern.info kernel: [ 0.941376] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 928000 uV Wed May 17 13:25:26 2023 kern.info kernel: [ 0.951184] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1032000 uV Wed May 17 13:25:26 2023 kern.info kernel: [ 0.961040] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 720, quot_offset[ 7]= 0 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.970805] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 973, quot_offset[ 7]= 250 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.981655] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1078, quot_offset[ 7]= 105 Wed May 17 13:25:26 2023 kern.info kernel: [ 0.992592] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1255, quot_offset[ 7]= 175 Wed May 17 13:25:26 2023 kern.info kernel: [ 1.003666] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop Wed May 17 13:25:26 2023 kern.info kernel: [ 1.005919] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61 Wed May 17 13:25:26 2023 kern.info kernel: [ 1.021223] nand: ESMT PSR1GA30DT Wed May 17 13:25:26 2023 kern.info kernel: [ 1.027651] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.031138] 14 qcomsmem partitions found on MTD device qcom_nand.0 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.038340] Creating 14 MTD partitions on "qcom_nand.0": Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.044540] 0x000000000000-0x000000100000 : "0:sbl1" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.051365] 0x000000100000-0x000000200000 : "0:mibib" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.056275] 0x000000200000-0x000000500000 : "0:qsee" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.063080] 0x000000500000-0x000000580000 : "0:devcfg" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.065712] 0x000000580000-0x000000600000 : "0:rpm" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.070653] 0x000000600000-0x000000680000 : "0:cdt" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.075521] 0x000000680000-0x000000700000 : "0:appsblenv" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.080289] 0x000000700000-0x000000800000 : "0:appsbl" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.086357] 0x000000800000-0x000000880000 : "0:art" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.090878] 0x000000880000-0x000000900000 : "bdata" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.095720] 0x000000900000-0x000000980000 : "crash" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.100529] 0x000000980000-0x000000a00000 : "crash_syslog" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.105422] 0x000000a00000-0x000007040000 : "rootfs" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.203657] mtd: device 12 (rootfs) set to be root filesystem Wed May 17 13:25:26 2023 kern.alert kernel: [ 1.204019] mtdsplit: no squashfs found in "rootfs" Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.208398] 0x000007040000-0x0000070c0000 : "rsvd0" Wed May 17 13:25:26 2023 kern.info kernel: [ 1.218838] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz Wed May 17 13:25:26 2023 kern.info kernel: [ 1.220001] remoteproc remoteproc0: cd00000.q6v5_wcss is available Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.229338] ubi0: attaching mtd12 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.729770] ubi0: scanning is finished Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.737564] ubi0: attached mtd12 (name "rootfs", size 102 MiB) Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.737612] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.742323] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.749162] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.756025] ubi0: good PEBs: 818, bad PEBs: 0, corrupted PEBs: 0 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.762794] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.769040] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1684301111 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.776080] ubi0: available PEBs: 0, total reserved PEBs: 818, PEBs reserved for bad PEB handling: 20 Wed May 17 13:25:26 2023 kern.notice kernel: [ 1.785379] ubi0: background thread "ubi_bgt0d" started, PID 452 Wed May 17 13:25:26 2023 kern.info kernel: [ 1.786177] block ubiblock0_1: created from ubi0:1(rootfs) Wed May 17 13:25:26 2023 kern.info kernel: [ 1.838195] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Wed May 17 13:25:26 2023 kern.info kernel: [ 1.838842] Freeing unused kernel memory: 1216K Wed May 17 13:25:26 2023 kern.info kernel: [ 1.882077] Run /sbin/init as init process Wed May 17 13:25:26 2023 kern.debug kernel: [ 1.882100] with arguments: Wed May 17 13:25:26 2023 kern.debug kernel: [ 1.882102] /sbin/init Wed May 17 13:25:26 2023 kern.debug kernel: [ 1.882106] with environment: Wed May 17 13:25:26 2023 kern.debug kernel: [ 1.882108] HOME=/ Wed May 17 13:25:26 2023 kern.debug kernel: [ 1.882111] TERM=linux Wed May 17 13:25:26 2023 user.info kernel: [ 2.529001] init: Console is alive Wed May 17 13:25:26 2023 user.info kernel: [ 2.529164] init: - watchdog - Wed May 17 13:25:26 2023 kern.notice kernel: [ 3.042011] random: crng init done Wed May 17 13:25:26 2023 user.info kernel: [ 3.707443] kmodloader: loading kernel modules from /etc/modules-boot.d/ Wed May 17 13:25:26 2023 user.info kernel: [ 3.774743] kmodloader: done loading kernel modules from /etc/modules-boot.d/ Wed May 17 13:25:26 2023 user.info kernel: [ 3.781046] init: - preinit - Wed May 17 13:25:26 2023 user.info kernel: [ 8.597152] mount_root: loading kmods from internal overlay Wed May 17 13:25:26 2023 user.info kernel: [ 8.609965] kmodloader: loading kernel modules from //etc/modules-boot.d/ Wed May 17 13:25:26 2023 user.info kernel: [ 8.610628] kmodloader: done loading kernel modules from //etc/modules-boot.d/ Wed May 17 13:25:26 2023 kern.warn kernel: [ 8.778121] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. Wed May 17 13:25:26 2023 user.info kernel: [ 8.810304] block: attempting to load /etc/config/fstab Wed May 17 13:25:26 2023 user.err kernel: [ 8.813986] block: unable to load configuration (fstab: Entry not found) Wed May 17 13:25:26 2023 user.err kernel: [ 8.814394] block: no usable configuration Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.830515] UBIFS (ubi0:2): default file-system created Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.831128] UBIFS (ubi0:2): Mounting in unauthenticated mode Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.834665] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 553 Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.900791] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.900828] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.907625] UBIFS (ubi0:2): FS size: 31363072 bytes (29 MiB, 247 LEBs), max 257 LEBs, journal size 1523712 bytes (1 MiB, 12 LEBs) Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.917519] UBIFS (ubi0:2): reserved for root: 1481354 bytes (1446 KiB) Wed May 17 13:25:26 2023 kern.notice kernel: [ 8.929137] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 051A8683-E420-44E3-A8BC-D9ACD466EDA6, small LPT model Wed May 17 13:25:26 2023 kern.warn kernel: [ 8.940249] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. Wed May 17 13:25:26 2023 user.info kernel: [ 8.973735] block: attempting to load /etc/config/fstab Wed May 17 13:25:26 2023 user.err kernel: [ 8.973841] block: unable to load configuration (fstab: Entry not found) Wed May 17 13:25:26 2023 user.err kernel: [ 8.977814] block: no usable configuration Wed May 17 13:25:26 2023 user.info kernel: [ 8.985807] mount_root: overlay filesystem has not been fully initialized yet Wed May 17 13:25:26 2023 user.info kernel: [ 8.988873] mount_root: switching to ubifs overlay Wed May 17 13:25:26 2023 kern.warn kernel: [ 9.001958] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. Wed May 17 13:25:26 2023 user.warn kernel: [ 9.009831] urandom-seed: Seed file not found (/etc/urandom.seed) Wed May 17 13:25:26 2023 user.info kernel: [ 9.152817] procd: - early - Wed May 17 13:25:26 2023 user.info kernel: [ 9.152935] procd: - watchdog - Wed May 17 13:25:26 2023 user.info kernel: [ 9.830594] procd: - watchdog - Wed May 17 13:25:26 2023 user.info kernel: [ 9.937104] procd: - ubus - Wed May 17 13:25:26 2023 user.info kernel: [ 10.192993] procd: - init - Wed May 17 13:25:26 2023 user.info kernel: [ 11.164158] kmodloader: loading kernel modules from /etc/modules.d/* Wed May 17 13:25:26 2023 kern.info kernel: [ 11.225275] NET: Registered PF_ALG protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 11.230973] NET: Registered PF_KEY protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 11.232488] Initializing XFRM netlink socket Wed May 17 13:25:26 2023 user.info kernel: [ 11.255801] urngd: v1.0.2 started. Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.318263] ssdk_switch_device_num_init[1211]:INFO:ess-switch dts node number: 1 Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.318372] ssdk_dt_get_switch_node[1016]:INFO:ess-switch DT exist! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.324768] ssdk_dt_parse_access_mode[902]:INFO:switch_access_mode: local bus Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.330727] ssdk_dt_parse_access_mode[915]:INFO:switchreg_base_addr: 0x3a000000 Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.338031] ssdk_dt_parse_access_mode[916]:INFO:switchreg_size: 0x1000000 Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.345141] ssdk_dt_parse_mac_mode[304]:INFO:mac mode = 0x0 Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.352088] ssdk_dt_parse_mac_mode[313]:INFO:mac mode1 = 0xff Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.357461] ssdk_dt_parse_mac_mode[322]:INFO:mac mode2 = 0xff Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.363418] ssdk_dt_parse_uniphy[341]:INFO:ess-uniphy DT exist! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.369259] ssdk_dt_parse_intf_mac[845]:INFO:dp2 MAC 3c:cd:57:3c:1d:e9 Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.374875] ssdk_dt_parse_intf_mac[845]:INFO:dp3 MAC 5c:02:14:c3:30:2a Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.381456] ssdk_dt_parse_intf_mac[845]:INFO:dp4 MAC 5c:02:14:c3:30:2a Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.387973] ssdk_dt_parse_intf_mac[845]:INFO:dp5 MAC 5c:02:14:c3:30:2a Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.394497] ssdk_plat_init start Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.523476] ssdk_gcc_clock_init[1206]:INFO:SSDK gcc clock init successfully! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.524888] malibu_phy_api_ops_init[2866]:INFO:qca probe malibu phy driver succeeded! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.535220] regi_init[3754]:INFO:Initializing HPPE!! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.772053] ssdk_ppe_reset_init[1464]:INFO:ppe reset successfully! Wed May 17 13:25:26 2023 kern.warn kernel: [ 11.775504] qca_hppe_portctrl_hw_init[111]:INFO:Hawkeye PPE port initializing Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.007169] adpt_hppe_port_mux_mac_type_set[2690]:WARN:port 6 need not to configure mux and mac type Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.007263] ssdk_switch_register[1867]:INFO:Chip version 0x1500 Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.015408] qca_link_polling_select[1367]:INFO:link-polling-required node does not exist Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.021028] ssdk_switch_register[1893]:INFO:polling is selected Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.029368] regi_init[3758]:INFO:Initializing HPPE Done!! Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.035097] ssdk_genl_init[211]:INFO:ssdk genl family register success. Wed May 17 13:25:26 2023 kern.warn kernel: [ 12.040563] regi_init[3821]:INFO:qca-ssdk module init succeeded! Wed May 17 13:25:26 2023 kern.info kernel: [ 12.049529] tun: Universal TUN/TAP device driver, 1.6 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.059147] EDMA ver 1 hw init Wed May 17 13:25:26 2023 kern.info kernel: [ 12.059404] EDMA HW Reset completed succesfully Wed May 17 13:25:26 2023 kern.info kernel: [ 12.061157] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.065590] RxDesc:1 (15-15) RxFill:1 (7-7) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.072126] nss-dp 3a001200.dp2 eth0: Registered netdev eth0(qcom-id:2) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.076043] nss-dp 3a001400.dp3 eth1: Registered netdev eth1(qcom-id:3) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.083437] nss-dp 3a001600.dp4 eth2: Registered netdev eth2(qcom-id:4) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.089326] nss-dp 3a001800.dp5 eth3: Registered netdev eth3(qcom-id:5) Wed May 17 13:25:26 2023 kern.info kernel: [ 12.095002] ** Wed May 17 13:25:26 2023 kern.info kernel: [ 12.101323] * NSS Data Plane driver Wed May 17 13:25:26 2023 kern.info kernel: [ 12.107940] ** Wed May 17 13:25:26 2023 kern.info kernel: [ 12.119833] l2tp_core: L2TP core driver, V2.0 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.120840] l2tp_netlink: L2TP netlink interface Wed May 17 13:25:26 2023 kern.alert kernel: [ 12.130664] qca-nss-drv.ko is loaded for symbol link Wed May 17 13:25:26 2023 kern.info kernel: [ 12.132641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Wed May 17 13:25:26 2023 kern.info kernel: [ 12.170238] cryptodev: driver 1.12 loaded. Wed May 17 13:25:26 2023 kern.info kernel: [ 12.176041] PPP generic driver version 2.4.2 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.177246] NET: Registered PF_PPPOX protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 12.185099] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b Wed May 17 13:25:26 2023 kern.info kernel: [ 12.185154] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.199092] l2tp_ppp: PPPoL2TP kernel driver, V2.0 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.248598] PPP MPPE Compression module registered Wed May 17 13:25:26 2023 kern.info kernel: [ 12.251376] NET: Registered PF_QIPCRTR protocol family Wed May 17 13:25:26 2023 kern.info kernel: [ 12.257449] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. Wed May 17 13:25:26 2023 kern.info kernel: [ 12.257495] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. Wed May 17 13:25:26 2023 kern.info kernel: [ 12.283591] xt_time: kernel timezone is -0000 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.315132] ath11k c000000.wifi: ipq8074 hw2.0 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.315171] ath11k c000000.wifi: FW memory mode: 0 Wed May 17 13:25:26 2023 kern.info kernel: [ 12.318753] remoteproc remoteproc0: powering up cd00000.q6v5_wcss Wed May 17 13:25:26 2023 kern.info kernel: [ 12.402897] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 Wed May 17 13:25:26 2023 kern.info kernel: [ 13.525416] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up Wed May 17 13:25:26 2023 user.info kernel: [ 13.526819] kmodloader: done loading kernel modules from /etc/modules.d/* Wed May 17 13:25:26 2023 kern.warn kernel: [ 13.527371] ath11k c000000.wifi: qmi ignore invalid mem req type 3 Wed May 17 13:25:26 2023 kern.info kernel: [ 13.539223] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff Wed May 17 13:25:26 2023 kern.info kernel: [ 13.544688] ath11k c000000.wifi: fw_version 0x250a04a5 fw_build_timestamp 2021-12-20 07:09 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Wed May 17 13:25:26 2023 kern.err kernel: [ 13.887515] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Redmi-AX6 from ath11k/IPQ8074/hw2.0/board-2.bin Wed May 17 13:25:26 2023 kern.err kernel: [ 13.887580] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ8074/hw2.0/board-2.bin Wed May 17 13:25:26 2023 kern.err kernel: [ 13.900647] ath11k c000000.wifi: failed to fetch board.bin from IPQ8074/hw2.0 Wed May 17 13:25:26 2023 kern.warn kernel: [ 13.913365] ath11k c000000.wifi: qmi failed to fetch board file: -12 Wed May 17 13:25:26 2023 kern.warn kernel: [ 13.920382] ath11k c000000.wifi: failed to load board data file: -12 Wed May 17 13:25:26 2023 kern.warn kernel: [ 26.245350] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. Wed May 17 13:25:26 2023 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf Wed May 17 13:25:26 2023 daemon.notice procd: /etc/rc.d/S13openssl: Enabling engine devcrypto Wed May 17 13:25:26 2023 daemon.notice procd: /etc/rc.d/S16qca-ssdk: /etc/rc.common: line 23: ssdk_sh: not found Wed May 17 13:25:26 2023 daemon.notice procd: /etc/rc.d/S16qca-ssdk: starting Wed May 17 13:25:28 2023 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Wed May 17 13:25:28 2023 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Wed May 17 13:25:30 2023 kern.info kernel: [ 30.303662] ECM init Wed May 17 13:25:30 2023 kern.info kernel: [ 30.303731] ECM database jhash random seed: 0x30759831 Wed May 17 13:25:30 2023 kern.info kernel: [ 30.306231] ECM init complete Wed May 17 13:25:30 2023 daemon.notice procd: /etc/rc.d/S19qca-nss-ecm: net.bridge.bridge-nf-call-ip6tables = 1 Wed May 17 13:25:30 2023 daemon.notice procd: /etc/rc.d/S19qca-nss-ecm: net.bridge.bridge-nf-call-iptables = 1 Wed May 17 13:25:30 2023 daemon.notice procd: /etc/rc.d/S19qca-nss-ecm: sysctl: error: 'dev.nss/general/redirect' is an unknown key Wed May 17 13:25:31 2023 user.notice : Added device handler type: 8021ad Wed May 17 13:25:31 2023 user.notice : Added device handler type: 8021q Wed May 17 13:25:31 2023 user.notice : Added device handler type: macvlan Wed May 17 13:25:31 2023 user.notice : Added device handler type: veth Wed May 17 13:25:31 2023 user.notice : Added device handler type: bridge Wed May 17 13:25:31 2023 user.notice : Added device handler type: Network device Wed May 17 13:25:31 2023 user.notice : Added device handler type: tunnel Wed May 17 13:25:31 2023 daemon.notice wpa_supplicant[3064]: Successfully initialized wpa_supplicant Wed May 17 13:25:31 2023 daemon.notice procd: /etc/rc.d/S50autoreboot: Command failed: ubus call service delete { "name": "cron" } (Not found) Wed May 17 13:25:31 2023 cron.err crond[3253]: crond (busybox 1.36.0) started, log level 5 Wed May 17 13:25:31 2023 daemon.notice procd: /etc/rc.d/S50autoreboot: Auto REBOOT has started. Wed May 17 13:25:32 2023 kern.info kernel: [ 31.832091] pmd9655_ldo11: disabling Wed May 17 13:25:32 2023 kern.info kernel: [ 31.857302] br-lan: port 1(eth1) entered blocking state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.857349] br-lan: port 1(eth1) entered disabled state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.861611] device eth1 entered promiscuous mode Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'lan' is enabled Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'lan' is setting up now Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'lan' is now up Wed May 17 13:25:32 2023 kern.info kernel: [ 31.874727] br-lan: port 2(eth2) entered blocking state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.874782] br-lan: port 2(eth2) entered disabled state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.879056] device eth2 entered promiscuous mode Wed May 17 13:25:32 2023 kern.info kernel: [ 31.887681] br-lan: port 3(eth3) entered blocking state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.888847] br-lan: port 3(eth3) entered disabled state Wed May 17 13:25:32 2023 kern.info kernel: [ 31.894133] device eth3 entered promiscuous mode Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'loopback' is enabled Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'loopback' is setting up now Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'loopback' is now up Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'wan' is enabled Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'wan6' is enabled Wed May 17 13:25:32 2023 daemon.notice netifd: Network device 'lo' link is up Wed May 17 13:25:32 2023 daemon.notice netifd: Interface 'loopback' has link connectivity Wed May 17 13:25:32 2023 daemon.notice procd: /etc/rc.d/S60dnsforwarder: luci for dnsforwarder Wed May 17 13:25:32 2023 daemon.notice procd: /etc/rc.d/S60dnsforwarder: dnsforwarder is not enabled Wed May 17 13:25:32 2023 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/dhcp Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/radvd Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/wireless reload dependency on /etc/config/network Wed May 17 13:25:32 2023 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan) Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/luci-splash Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/qos Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/firewall reload dependency on /etc/config/miniupnpd Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/odhcpd Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up non-init /etc/config/fstab reload handler: /sbin/block mount Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/system reload trigger for non-procd /etc/init.d/led Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/luci_statistics Wed May 17 13:25:32 2023 user.notice ucitrack: Setting up /etc/config/system reload dependency on /etc/config/dhcp Wed May 17 13:25:33 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:25:33 2023 authpriv.warn dropbear[4200]: Failed listening on '22': Error listening: Address not available Wed May 17 13:25:33 2023 authpriv.info dropbear[4200]: Not backgrounding Wed May 17 13:25:33 2023 user.notice ucitrack: Setting up /etc/config/luci-app-ipsec-server reload trigger for non-procd /etc/init.d/luci-app-ipsec-server Wed May 17 13:25:33 2023 user.notice ucitrack: Setting up /etc/config/socat reload trigger for non-procd /etc/init.d/luci_socat Wed May 17 13:25:33 2023 user.notice ucitrack: Setting up /etc/config/arpbind reload trigger for non-procd /etc/init.d/arpbind Wed May 17 13:25:33 2023 user.notice ucitrack: Setting up /etc/config/frp reload trigger for non-procd /etc/init.d/frp Wed May 17 13:25:33 2023 user.notice ucitrack: Setting up /etc/config/mia reload trigger for non-procd /etc/init.d/mia Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/openclash reload trigger for non-procd /etc/init.d/openclash Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/serverchan reload trigger for non-procd /etc/init.d/serverchan Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/softethervpn reload trigger for non-procd /etc/init.d/softethervpn Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/shadowsocksr reload trigger for non-procd /etc/init.d/shadowsocksr Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/turboacc reload trigger for non-procd /etc/init.d/turboacc Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/vlmcsd reload trigger for non-procd /etc/init.d/kms Wed May 17 13:25:34 2023 user.notice ucitrack: Setting up /etc/config/vsftpd reload trigger for non-procd /etc/init.d/vsftpd Wed May 17 13:25:34 2023 daemon.notice procd: /etc/rc.d/S90kms: KMS Server has started. Wed May 17 13:25:34 2023 daemon.notice procd: /etc/rc.d/S90kms: uci: Entry not found Wed May 17 13:25:37 2023 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: started, v1.36.0 Wed May 17 13:25:37 2023 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: broadcasting discover Wed May 17 13:25:37 2023 user.notice nlbwmon: Reloading nlbwmon due to ifup of loopback (lo) Wed May 17 13:25:40 2023 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: no lease, failing Wed May 17 13:25:41 2023 daemon.notice procd: /etc/rc.d/S90turboacc: net.ipv4.tcp_congestion_control = cubic Wed May 17 13:25:41 2023 daemon.notice procd: /etc/rc.d/S90turboacc: killall: dnscache: no process killed Wed May 17 13:25:41 2023 daemon.notice procd: /etc/rc.d/S90turboacc: sh: you need to specify whom to kill Wed May 17 13:25:41 2023 daemon.notice procd: /etc/rc.d/S90turboacc: Stop DNS Caching Wed May 17 13:25:41 2023 daemon.notice procd: /etc/rc.d/S90turboacc: DNSMASQ change Wed May 17 13:25:49 2023 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN Wed May 17 13:25:49 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:25:49 2023 daemon.notice procd: /etc/rc.d/S99bootcount: Warning: Bad CRC, using default environment Wed May 17 13:25:59 2023 daemon.info frps: Instance "main" disabled. Wed May 17 13:25:59 2023 daemon.notice procd: /etc/rc.d/S99frps: [info] Instance "main" disabled. Wed May 17 13:26:00 2023 daemon.notice procd: /etc/rc.d/S99openclash: OpenClash Restart... Wed May 17 13:26:05 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:26:07 2023 cron.err crond[7268]: crond (busybox 1.36.0) started, log level 5 Wed May 17 13:26:07 2023 daemon.notice procd: /etc/rc.d/S99openclash: OpenClash Already Stop! Wed May 17 13:26:07 2023 daemon.notice procd: /etc/rc.d/S99serverchan: serverchan is starting now ... Wed May 17 13:26:07 2023 daemon.notice procd: /etc/rc.d/S99zerotier: disabled in config Wed May 17 13:26:07 2023 daemon.info procd: - init complete - Wed May 17 13:26:07 2023 daemon.info urandom_seed[7489]: Seed saved (/etc/urandom.seed) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0159] N: ttyd 1.6.3 (libwebsockets 4.3.2-20220401-106-ga6f1cc5b5) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0161] N: tty configuration: Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0162] N: start command: /bin/login Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0162] N: close signal: SIGHUP (1) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0163] N: terminal type: xterm-256color Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0174] N: /usr/lib/libwebsockets-evlib_uv.so Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0176] N: lws_create_context: LWS: 4.3.2-20220401-106-ga6f1cc5b5, NET CLI SRV H1 H2 WS ConMon IPV6-off Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0177] N: elops_init_pt_uv: Using foreign event loop... Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0179] N: lws_lc_tag: ++ [wsi|0|pipe] (1) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0180] N: lws_lc_tag: ++ [vh|0|netlink] (1) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0182] N: lws_lc_tag: ++ [vh|1|default|br-lan|br-lan|7681] (2) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0190] N: [vh|1|default|br-lan|br-lan|7681]: lws_socket_bind: source ads 192.168.1.1 Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0193] N: lws_lc_tag: ++ [wsi|1|listen|default|br-lan|7681] (2) Wed May 17 13:26:08 2023 daemon.notice ttyd[7428]: [2023/05/17 13:26:08:0194] N: Listening on port: 7681 Wed May 17 13:26:08 2023 cron.err crond[7759]: crond (busybox 1.36.0) started, log level 5 Wed May 17 13:26:21 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:26:37 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:26:53 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:27:09 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:27:25 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:27:41 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:27:57 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:28:13 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:28:29 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:28:45 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:29:01 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:29:17 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:29:25 2023 kern.info kernel: [ 264.792247] nss-dp 3a001400.dp3 eth1: PHY Link up speed: 1000 Wed May 17 13:29:25 2023 kern.info kernel: [ 264.792336] br-lan: port 1(eth1) entered blocking state Wed May 17 13:29:25 2023 kern.info kernel: [ 264.796987] br-lan: port 1(eth1) entered forwarding state Wed May 17 13:29:25 2023 daemon.notice netifd: Network device 'eth1' link is up Wed May 17 13:29:25 2023 daemon.notice netifd: bridge 'br-lan' link is up Wed May 17 13:29:25 2023 daemon.notice netifd: Interface 'lan' has link connectivity Wed May 17 13:29:25 2023 kern.info kernel: [ 264.802388] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready Wed May 17 13:29:25 2023 daemon.err odhcpd[3169]: Failed to send to fe80::1c9:63a8:20bc:fcf2%lan@br-lan (Address not available) Wed May 17 13:29:25 2023 daemon.err odhcpd[3169]: Failed to send to fe80::1c9:63a8:20bc:fcf2%lan@br-lan (Address not available) Wed May 17 13:29:26 2023 daemon.err odhcpd[3169]: Failed to send to ff02::1%lan@br-lan (Address not available) Wed May 17 13:32:41 2023 daemon.err uhttpd[2105]: sh: out of range Wed May 17 13:32:41 2023 daemon.err uhttpd[2105]: sh: out of range
内核日志：
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.110 (koysuke@koysuke) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r5971-a6f1cc5b5) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed May 17 05:25:11 2023 [ 0.000000] Machine model: Redmi AX6 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff] [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff] [ 0.000000] node 0: [mem 0x000000004a400000-0x000000004a4fffff] [ 0.000000] node 0: [mem 0x000000004a500000-0x000000004a5fffff] [ 0.000000] node 0: [mem 0x000000004a600000-0x000000004e8fffff] [ 0.000000] node 0: [mem 0x000000004e900000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] psci: OSI mode supported. [ 0.000000] percpu: Embedded 17 pages/cpu s30424 r8192 d31016 u69632 [ 0.000000] pcpu-alloc: s30424 r8192 d31016 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] Kernel command line: console=ttyMSM0,115200n8 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait root=/dev/ubiblock0_1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 415648K/524288K available (7680K kernel code, 896K rwdata, 2032K rodata, 1216K init, 288K bss, 108640K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000187] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000204] pid_max: default: 32768 minimum: 301 [ 0.000353] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.000369] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.002055] rcu: Hierarchical SRCU implementation. [ 0.002234] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.002721] smp: Bringing up secondary CPUs ... [ 0.003349] Detected VIPT I-cache on CPU1 [ 0.003417] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004059] Detected VIPT I-cache on CPU2 [ 0.004100] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004703] Detected VIPT I-cache on CPU3 [ 0.004740] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.004808] smp: Brought up 1 node, 4 CPUs [ 0.004836] SMP: Total of 4 processors activated. [ 0.004844] CPU features: detected: 32-bit EL0 Support [ 0.004851] CPU features: detected: CRC32 instructions [ 0.004904] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.004914] CPU: All CPU(s) started at EL1 [ 0.004936] alternatives: patching kernel code [ 0.011953] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.011989] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.012151] pinctrl core: initialized pinctrl subsystem [ 0.013213] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.013708] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.013753] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.013791] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.014134] thermal_sys: Registered thermal governor 'step_wise' [ 0.015471] cpuidle: using governor menu [ 0.015703] ASID allocator initialised with 65536 entries [ 0.068169] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.076792] cryptd: max_cpu_qlen set to 1000 [ 0.080236] SCSI subsystem initialized [ 0.080424] usbcore: registered new interface driver usbfs [ 0.080471] usbcore: registered new interface driver hub [ 0.080510] usbcore: registered new device driver usb [ 0.080751] qcom_scm: convention: smc arm 64 [ 0.081990] clocksource: Switched to clocksource arch_sys_counter [ 0.082681] NET: Registered PF_INET protocol family [ 0.082809] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.083413] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.083438] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.083453] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.083561] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.083648] TCP: Hash tables configured (established 4096 bind 4096) [ 0.083733] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.083763] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.083921] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.083957] PCI: CLS 0 bytes, default 64 [ 0.090225] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.094098] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.094117] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.153883] bam-dma-engine 704000.dma: num-channels unspecified in dt [ 0.153909] bam-dma-engine 704000.dma: num-ees unspecified in dt [ 0.157500] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.157967] msm_serial 78b3000.serial: msm_serial: detected port #0 [ 0.158000] msm_serial 78b3000.serial: uartclk = 3686400 [ 0.158038] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM [ 0.158067] msm_serial: console setup on port #0 [ 0.762794] printk: console [ttyMSM0] enabled [ 0.767918] msm_serial: driver initialized [ 0.775837] loop: module loaded [ 0.777183] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61 [ 0.778750] nand: ESMT PSR1GA30DT [ 0.785359] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 0.789326] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [ 0.796901] pmd9655_s3: supplied by regulator-dummy [ 0.802175] pmd9655_s4: supplied by regulator-dummy [ 0.806919] pmd9655_ldo11: supplied by regulator-dummy [ 0.824907] i2c_dev: i2c /dev entries driver [ 0.828428] sdhci: Secure Digital Host Controller Interface driver [ 0.828479] sdhci: Copyright(c) Pierre Ossman [ 0.834263] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.839302] remoteproc remoteproc0: releasing cd00000.q6v5_wcss [ 0.845246] NET: Registered PF_INET6 protocol family [ 0.850856] Segment Routing with IPv6 [ 0.855300] In-situ OAM (IOAM) with IPv6 [ 0.858864] NET: Registered PF_PACKET protocol family [ 0.862871] Bridge firewalling registered [ 0.867745] 8021q: 802.1Q VLAN Support v1.8 [ 0.887405] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4 [ 0.887695] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0 [ 0.893705] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1 [ 0.900131] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0 [ 0.907803] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable [ 0.915315] cpr3_mem_acc_init: apc: not using memory accelerator regulator [ 0.924445] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 728000 uV [ 0.931385] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 864000 uV [ 0.941376] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 928000 uV [ 0.951184] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop=1032000 uV [ 0.961040] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 720, quot_offset[ 7]= 0 [ 0.970805] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 973, quot_offset[ 7]= 250 [ 0.981655] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1078, quot_offset[ 7]= 105 [ 0.992592] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1255, quot_offset[ 7]= 175 [ 1.003666] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop [ 1.005919] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0x61 [ 1.021223] nand: ESMT PSR1GA30DT [ 1.027651] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 [ 1.031138] 14 qcomsmem partitions found on MTD device qcom_nand.0 [ 1.038340] Creating 14 MTD partitions on "qcom_nand.0": [ 1.044540] 0x000000000000-0x000000100000 : "0:sbl1" [ 1.051365] 0x000000100000-0x000000200000 : "0:mibib" [ 1.056275] 0x000000200000-0x000000500000 : "0:qsee" [ 1.063080] 0x000000500000-0x000000580000 : "0:devcfg" [ 1.065712] 0x000000580000-0x000000600000 : "0:rpm" [ 1.070653] 0x000000600000-0x000000680000 : "0:cdt" [ 1.075521] 0x000000680000-0x000000700000 : "0:appsblenv" [ 1.080289] 0x000000700000-0x000000800000 : "0:appsbl" [ 1.086357] 0x000000800000-0x000000880000 : "0:art" [ 1.090878] 0x000000880000-0x000000900000 : "bdata" [ 1.095720] 0x000000900000-0x000000980000 : "crash" [ 1.100529] 0x000000980000-0x000000a00000 : "crash_syslog" [ 1.105422] 0x000000a00000-0x000007040000 : "rootfs" [ 1.203657] mtd: device 12 (rootfs) set to be root filesystem [ 1.204019] mtdsplit: no squashfs found in "rootfs" [ 1.208398] 0x000007040000-0x0000070c0000 : "rsvd0" [ 1.218838] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz [ 1.220001] remoteproc remoteproc0: cd00000.q6v5_wcss is available [ 1.229338] ubi0: attaching mtd12 [ 1.729770] ubi0: scanning is finished [ 1.737564] ubi0: attached mtd12 (name "rootfs", size 102 MiB) [ 1.737612] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.742323] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.749162] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.756025] ubi0: good PEBs: 818, bad PEBs: 0, corrupted PEBs: 0 [ 1.762794] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 1.769040] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1684301111 [ 1.776080] ubi0: available PEBs: 0, total reserved PEBs: 818, PEBs reserved for bad PEB handling: 20 [ 1.785379] ubi0: background thread "ubi_bgt0d" started, PID 452 [ 1.786177] block ubiblock0_1: created from ubi0:1(rootfs) [ 1.838195] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [ 1.838842] Freeing unused kernel memory: 1216K [ 1.882077] Run /sbin/init as init process [ 1.882100] with arguments: [ 1.882102] /sbin/init [ 1.882106] with environment: [ 1.882108] HOME=/ [ 1.882111] TERM=linux [ 2.529001] init: Console is alive [ 2.529164] init: - watchdog - [ 3.042011] random: crng init done [ 3.707443] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.774743] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.781046] init: - preinit - [ 8.597152] mount_root: loading kmods from internal overlay [ 8.609965] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 8.610628] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 8.778121] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 8.810304] block: attempting to load /etc/config/fstab [ 8.813986] block: unable to load configuration (fstab: Entry not found) [ 8.814394] block: no usable configuration [ 8.830515] UBIFS (ubi0:2): default file-system created [ 8.831128] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 8.834665] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 553 [ 8.900791] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 8.900828] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 8.907625] UBIFS (ubi0:2): FS size: 31363072 bytes (29 MiB, 247 LEBs), max 257 LEBs, journal size 1523712 bytes (1 MiB, 12 LEBs) [ 8.917519] UBIFS (ubi0:2): reserved for root: 1481354 bytes (1446 KiB) [ 8.929137] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 051A8683-E420-44E3-A8BC-D9ACD466EDA6, small LPT model [ 8.940249] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 8.973735] block: attempting to load /etc/config/fstab [ 8.973841] block: unable to load configuration (fstab: Entry not found) [ 8.977814] block: no usable configuration [ 8.985807] mount_root: overlay filesystem has not been fully initialized yet [ 8.988873] mount_root: switching to ubifs overlay [ 9.001958] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.009831] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.152817] procd: - early - [ 9.152935] procd: - watchdog - [ 9.830594] procd: - watchdog - [ 9.937104] procd: - ubus - [ 10.192993] procd: - init - [ 11.164158] kmodloader: loading kernel modules from /etc/modules.d/* [ 11.225275] NET: Registered PF_ALG protocol family [ 11.230973] NET: Registered PF_KEY protocol family [ 11.232488] Initializing XFRM netlink socket [ 11.255801] urngd: v1.0.2 started. [ 11.318263] ssdk_switch_device_num_init[1211]:INFO:ess-switch dts node number: 1 [ 11.318372] ssdk_dt_get_switch_node[1016]:INFO:ess-switch DT exist! [ 11.324768] ssdk_dt_parse_access_mode[902]:INFO:switch_access_mode: local bus [ 11.330727] ssdk_dt_parse_access_mode[915]:INFO:switchreg_base_addr: 0x3a000000 [ 11.338031] ssdk_dt_parse_access_mode[916]:INFO:switchreg_size: 0x1000000 [ 11.345141] ssdk_dt_parse_mac_mode[304]:INFO:mac mode = 0x0 [ 11.352088] ssdk_dt_parse_mac_mode[313]:INFO:mac mode1 = 0xff [ 11.357461] ssdk_dt_parse_mac_mode[322]:INFO:mac mode2 = 0xff [ 11.363418] ssdk_dt_parse_uniphy[341]:INFO:ess-uniphy DT exist! [ 11.369259] ssdk_dt_parse_intf_mac[845]:INFO:dp2 MAC 3c:cd:57:3c:1d:e9 [ 11.374875] ssdk_dt_parse_intf_mac[845]:INFO:dp3 MAC 5c:02:14:c3:30:2a [ 11.381456] ssdk_dt_parse_intf_mac[845]:INFO:dp4 MAC 5c:02:14:c3:30:2a [ 11.387973] ssdk_dt_parse_intf_mac[845]:INFO:dp5 MAC 5c:02:14:c3:30:2a [ 11.394497] ssdk_plat_init start [ 11.523476] ssdk_gcc_clock_init[1206]:INFO:SSDK gcc clock init successfully! [ 11.524888] malibu_phy_api_ops_init[2866]:INFO:qca probe malibu phy driver succeeded! [ 11.535220] regi_init[3754]:INFO:Initializing HPPE!! [ 11.772053] ssdk_ppe_reset_init[1464]:INFO:ppe reset successfully! [ 11.775504] qca_hppe_portctrl_hw_init[111]:INFO:Hawkeye PPE port initializing [ 12.007169] adpt_hppe_port_mux_mac_type_set[2690]:WARN:port 6 need not to configure mux and mac type [ 12.007263] ssdk_switch_register[1867]:INFO:Chip version 0x1500 [ 12.015408] qca_link_polling_select[1367]:INFO:link-polling-required node does not exist [ 12.021028] ssdk_switch_register[1893]:INFO:polling is selected [ 12.029368] regi_init[3758]:INFO:Initializing HPPE Done!! [ 12.035097] ssdk_genl_init[211]:INFO:ssdk genl family register success. [ 12.040563] regi_init[3821]:INFO:qca-ssdk module init succeeded! [ 12.049529] tun: Universal TUN/TAP device driver, 1.6 [ 12.059147] EDMA ver 1 hw init [ 12.059404] EDMA HW Reset completed succesfully [ 12.061157] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [ 12.065590] RxDesc:1 (15-15) RxFill:1 (7-7) [ 12.072126] nss-dp 3a001200.dp2 eth0: Registered netdev eth0(qcom-id:2) [ 12.076043] nss-dp 3a001400.dp3 eth1: Registered netdev eth1(qcom-id:3) [ 12.083437] nss-dp 3a001600.dp4 eth2: Registered netdev eth2(qcom-id:4) [ 12.089326] nss-dp 3a001800.dp5 eth3: Registered netdev eth3(qcom-id:5) [ 12.095002] ** [ 12.101323] * NSS Data Plane driver [ 12.107940] ** [ 12.119833] l2tp_core: L2TP core driver, V2.0 [ 12.120840] l2tp_netlink: L2TP netlink interface [ 12.130664] qca-nss-drv.ko is loaded for symbol link [ 12.132641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 12.170238] cryptodev: driver 1.12 loaded. [ 12.176041] PPP generic driver version 2.4.2 [ 12.177246] NET: Registered PF_PPPOX protocol family [ 12.185099] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b [ 12.185154] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 [ 12.199092] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 12.248598] PPP MPPE Compression module registered [ 12.251376] NET: Registered PF_QIPCRTR protocol family [ 12.257449] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 12.257495] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 12.283591] xt_time: kernel timezone is -0000 [ 12.315132] ath11k c000000.wifi: ipq8074 hw2.0 [ 12.315171] ath11k c000000.wifi: FW memory mode: 0 [ 12.318753] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [ 12.402897] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [ 13.525416] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [ 13.526819] kmodloader: done loading kernel modules from /etc/modules.d/* [ 13.527371] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 13.539223] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff [ 13.544688] ath11k c000000.wifi: fw_version 0x250a04a5 fw_build_timestamp 2021-12-20 07:09 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 [ 13.887515] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Redmi-AX6 from ath11k/IPQ8074/hw2.0/board-2.bin [ 13.887580] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ8074/hw2.0/board-2.bin [ 13.900647] ath11k c000000.wifi: failed to fetch board.bin from IPQ8074/hw2.0 [ 13.913365] ath11k c000000.wifi: qmi failed to fetch board file: -12 [ 13.920382] ath11k c000000.wifi: failed to load board data file: -12 [ 26.245350] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [ 30.303662] ECM init [ 30.303731] ECM database jhash random seed: 0x30759831 [ 30.306231] ECM init complete [ 31.832091] pmd9655_ldo11: disabling [ 31.857302] br-lan: port 1(eth1) entered blocking state [ 31.857349] br-lan: port 1(eth1) entered disabled state [ 31.861611] device eth1 entered promiscuous mode [ 31.874727] br-lan: port 2(eth2) entered blocking state [ 31.874782] br-lan: port 2(eth2) entered disabled state [ 31.879056] device eth2 entered promiscuous mode [ 31.887681] br-lan: port 3(eth3) entered blocking state [ 31.888847] br-lan: port 3(eth3) entered disabled state [ 31.894133] device eth3 entered promiscuous mode [ 264.792247] nss-dp 3a001400.dp3 eth1: PHY Link up speed: 1000 [ 264.792336] br-lan: port 1(eth1) entered blocking state [ 264.796987] br-lan: port 1(eth1) entered forwarding state [ 264.802388] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready