Closed ghhccghk closed 1 year ago
反馈bug/问题模板，提建议请删除
Q：是否搜索了issue (使用 "x" 选择)
系统存在不稳定性，偶然可能导致重新启动，有的时候sfp模块划分的vlan无法正常连接，但是sfp模块信息可以正常获取
A： 出现这个问题极有可能导致无线连接不上进而导致系统重新启动 [ 68.667265] ieee80211 phy0: WA: free done event [ 68.667265] 1022c380 [ 68.667265] len = 24 [ 68.667265] DW0 : 18 00 03 30 [ 68.667265] DW1 : 01 10 04 98 [ 68.667265] DW2 : 00 80 00 90 [ 68.667265] DW3 : 1c 70 00 41 [ 68.667265] DW4 : 00 80 01 00 [ 68.667265] DW5 : 1e 80 ff 3f
A：
A：``` [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.110 (ghhc@ghhccghk-pc) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r0-07ad0eef) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed May 17 07:55:31 2023 [ 0.000000] Machine model: Bananapi BPI-R3 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff] [ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff] [ 0.000000] node 0: [mem 0x000000004ffc0000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632 [ 0.000000] pcpu-alloc: s29592 r8192 d31848 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: root=/dev/mmcblk0p65 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2040640K/2097152K available (8192K kernel code, 888K rwdata, 2144K rodata, 384K init, 289K bss, 56512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000142] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.000150] pid_max: default: 32768 minimum: 301 [ 0.000233] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000245] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001163] rcu: Hierarchical SRCU implementation. [ 0.001252] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.001466] smp: Bringing up secondary CPUs ... [ 0.001706] Detected VIPT I-cache on CPU1 [ 0.001730] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.001755] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.002021] Detected VIPT I-cache on CPU2 [ 0.002033] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 [ 0.002044] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.002269] Detected VIPT I-cache on CPU3 [ 0.002280] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000 [ 0.002288] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.002313] smp: Brought up 1 node, 4 CPUs [ 0.002327] SMP: Total of 4 processors activated. [ 0.002331] CPU features: detected: 32-bit EL0 Support [ 0.002334] CPU features: detected: CRC32 instructions [ 0.002409] CPU: All CPU(s) started at EL2 [ 0.002418] alternatives: patching kernel code [ 0.004801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.004824] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.004939] pinctrl core: initialized pinctrl subsystem [ 0.005382] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.005604] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.005636] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.005664] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.005888] thermal_sys: Registered thermal governor 'fair_share' [ 0.005891] thermal_sys: Registered thermal governor 'bang_bang' [ 0.005894] thermal_sys: Registered thermal governor 'step_wise' [ 0.005897] thermal_sys: Registered thermal governor 'user_space' [ 0.006077] ASID allocator initialised with 65536 entries [ 0.006328] pstore: Registered ramoops as persistent store backend [ 0.006332] ramoops: using 0x10000@0x42ff0000, ecc: 0 [ 0.015092] cryptd: max_cpu_qlen set to 1000 [ 0.016832] SCSI subsystem initialized [ 0.016915] libata version 3.00 loaded. [ 0.017684] clocksource: Switched to clocksource arch_sys_counter [ 0.018098] NET: Registered PF_INET protocol family [ 0.018213] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.018762] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.018783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.018791] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.018858] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.019032] TCP: Hash tables configured (established 16384 bind 16384) [ 0.019104] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.019131] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.019228] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.019250] PCI: CLS 0 bytes, default 64 [ 0.021058] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.023014] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.023026] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.045644] pwm-mediatek 10048000.pwm: clock: top fail: -517 [ 0.045933] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges: [ 0.045955] mtk-pcie-gen3 11280000.pcie: Parsing ranges property... [ 0.045964] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000 [ 0.046011] phy phy-soc:t-phy@11c00000.0: u3 auto load valid efuse: ENABLE with value: 1 [ 0.046039] phy phy-soc:t-phy@11c00000.0: pcie auto load valid efuse: ENABLE with value: 1 [ 0.046060] phy phy-soc:t-phy@11c00000.0: u3 lane1 efuse - intr 29, rx_imp f, tx_imp e [ 0.046143] /soc/pcie@11280000: Failed to get clk index: 0 ret: -517 [ 0.046154] mtk-pcie-gen3 11280000.pcie: failed to get clocks [ 0.048340] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.048920] printk: console [ttyS0] disabled [ 0.069080] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 122, base_baud = 2500000) is a ST16650V2 [ 0.764750] printk: console [ttyS0] enabled [ 0.789479] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 123, base_baud = 1625000) is a ST16650V2 [ 0.799312] mtk_rng 1020f000.trng: registered RNG driver [ 0.799371] hwrng: no data available [ 0.808216] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.816116] loop: module loaded [ 0.820314] spi-nand spi0.0: Winbond SPI NAND was found. [ 0.825622] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.833856] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.840197] Creating 4 MTD partitions on "spi0.0": [ 0.844971] 0x000000580000-0x000008000000 : "ubi" [ 0.972734] 0x000000380000-0x000000580000 : "fip" [ 0.979650] 0x000000080000-0x000000380000 : "reserved" [ 0.988108] 0x000000000000-0x000000080000 : "bl2" [ 1.130732] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009600000, irq 134 [ 1.140481] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc009600000, irq 134 [ 1.150034] i2c_dev: i2c /dev entries driver [ 1.155685] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.164102] NET: Registered PF_INET6 protocol family [ 1.169655] Segment Routing with IPv6 [ 1.173329] In-situ OAM (IOAM) with IPv6 [ 1.177264] NET: Registered PF_PACKET protocol family [ 1.182334] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.195448] 8021q: 802.1Q VLAN Support v1.8 [ 1.200539] pstore: Using crash dump compression: deflate [ 1.211360] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges: [ 1.218709] mtk-pcie-gen3 11280000.pcie: Parsing ranges property... [ 1.224964] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000 [ 1.233433] phy phy-soc:t-phy@11c00000.0: u3 auto load valid efuse: ENABLE with value: 1 [ 1.241528] phy phy-soc:t-phy@11c00000.0: pcie auto load valid efuse: ENABLE with value: 1 [ 1.249790] phy phy-soc:t-phy@11c00000.0: u3 lane1 efuse - intr 29, rx_imp f, tx_imp e [ 1.331089] mmc0: new MMC card at address 0001 [ 1.336319] mmcblk0: mmc0:0001 008GB0 7.28 GiB [ 1.344913] Alternate GPT is invalid, using primary GPT. [ 1.351365] FIT: Default configuration: "config-mt7986a-bananapi-bpi-r3" (OpenWrt bananapi_bpi-r3) [ 1.360314] FIT: kernel sub-image 0x00001000 - 0x005059df "kernel-1" (ARM64 OpenWrt Linux-5.15.110) [ 1.370300] FIT: flat_dt sub-image 0x00506000 - 0x0050e000 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r3 device tree blob) [ 1.381591] FIT: flat_dt sub-image 0x0050e000 - 0x00516000 "fdt-mt7986a-bananapi-bpi-r3-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nor) [ 1.397821] FIT: flat_dt sub-image 0x00516000 - 0x0051e000 "fdt-mt7986a-bananapi-bpi-r3-emmc-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-nor) [ 1.414917] FIT: flat_dt sub-image 0x0051e000 - 0x00526000 "fdt-mt7986a-bananapi-bpi-r3-emmc-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-snand) [ 1.432357] FIT: flat_dt sub-image 0x00526000 - 0x0052e000 "fdt-mt7986a-bananapi-bpi-r3-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-snand) [ 1.448931] FIT: filesystem sub-image 0x0052e000 - 0x07af9000 "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r3 rootfs) [ 1.459603] FIT: selecting configured loadable "rootfs-1" to be root filesystem [ 1.466896] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p65(rootfs-1) p66(rootfs_data) [ 1.474859] mmcblk0boot0: mmc0:0001 008GB0 4.00 MiB [ 1.480639] mmcblk0boot1: mmc0:0001 008GB0 4.00 MiB [ 1.481593] mtk-pcie-gen3 11280000.pcie: PCIe link down, ltssm reg val: 0x1000001 [ 1.485790] mmcblk0rpmb: mmc0:0001 008GB0 4.00 MiB, chardev (251:0) [ 1.493113] mtk-pcie-gen3: probe of 11280000.pcie failed with error -110 [ 1.528439] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode [ 1.535577] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 1.544519] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=142) [ 1.564334] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=143) [ 1.583926] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=144) [ 1.603476] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=145) [ 1.623020] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=146) [ 1.633648] DSA: tree 0 setup [ 1.638801] UBI: auto-attach mtd0 [ 1.642117] ubi0: default fastmap pool size: 45 [ 1.646630] ubi0: default fastmap WL pool size: 22 [ 1.651430] ubi0: attaching mtd0 [ 5.264303] ubi0: scanning is finished [ 5.309292] ubi0: attached mtd0 (name "ubi", size 122 MiB) [ 5.314771] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.321636] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.328408] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.335347] ubi0: good PEBs: 980, bad PEBs: 0, corrupted PEBs: 0 [ 5.341336] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 5.348539] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1650113974 [ 5.357645] ubi0: available PEBs: 465, total reserved PEBs: 515, PEBs reserved for bad PEB handling: 20 [ 5.367018] ubi0: background thread "ubi_bgt0d" started, PID 470 [ 5.378986] block ubiblock0_1: created from ubi0:1(rootfs) [ 5.393787] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. [ 5.401056] Freeing unused kernel memory: 384K [ 5.477743] Run /sbin/init as init process [ 5.481823] with arguments: [ 5.484773] /sbin/init [ 5.487464] with environment: [ 5.490597] HOME=/ [ 5.492941] TERM=linux [ 5.807036] init: Console is alive [ 5.810547] init: - watchdog - [ 7.130843] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 7.226368] Key type encrypted registered [ 7.234137] usbcore: registered new interface driver usbfs [ 7.239666] usbcore: registered new interface driver hub [ 7.244993] usbcore: registered new device driver usb [ 7.251295] raid6: skip pq benchmark and using algorithm neonx8 [ 7.257215] raid6: using neon recovery algorithm [ 7.262504] xor: measuring software checksum speed [ 7.269797] 8regs : 3951 MB/sec [ 7.276239] 32regs : 4678 MB/sec [ 7.283050] arm64_neon : 3986 MB/sec [ 7.287389] xor: using function: 32regs (4678 MB/sec) [ 7.300096] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 7.315558] SGI XFS with security attributes, no debug enabled [ 7.324507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.331756] fsl-ehci: Freescale EHCI Host controller driver [ 7.337969] ehci-platform: EHCI generic platform driver [ 7.344778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.351538] ohci-platform: OHCI generic platform driver [ 7.357607] uhci_hcd: USB Universal Host Controller Interface driver [ 7.366909] phy phy-soc:t-phy@11e10000.1: u2 auto load valid efuse: ENABLE with value: 1 [ 7.375068] phy phy-soc:t-phy@11e10000.2: u3 auto load valid efuse: ENABLE with value: 1 [ 7.383201] phy phy-soc:t-phy@11e10000.3: u2 auto load valid efuse: ENABLE with value: 1 [ 7.391743] xhci-mtk 11200000.usb: xHCI Host Controller [ 7.396973] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1 [ 7.407429] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010 [ 7.416617] xhci-mtk 11200000.usb: irq 126, io mem 0x11200000 [ 7.422436] xhci-mtk 11200000.usb: xHCI Host Controller [ 7.427647] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2 [ 7.435029] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 7.442509] hub 1-0:1.0: USB hub found [ 7.446263] hub 1-0:1.0: 2 ports detected [ 7.450574] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.458899] hub 2-0:1.0: USB hub found [ 7.462647] hub 2-0:1.0: 1 port detected [ 7.470787] usbcore: registered new interface driver usb-storage [ 7.477539] usbcore: registered new interface driver uas [ 7.483176] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 7.495794] init: - preinit - [ 7.897696] usb 1-1: new high-speed USB device number 2 using xhci-mtk [ 8.078408] hub 1-1:1.0: USB hub found [ 8.082187] hub 1-1:1.0: 4 ports detected [ 8.094433] random: procd: uninitialized urandom read (4 bytes read) [ 8.373527] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 8.382001] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 8.397861] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 11.367938] random: crng init done [ 12.632520] mount_root: loading kmods from internal overlay [ 12.654245] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 12.664551] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 14.354797] F2FS-fs (mmcblk0p66): Mounted with checkpoint version = 1666a7cb [ 14.362014] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab [ 14.378099] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 14.388373] mount_root: switched to extroot [ 14.401525] urandom-seed: Seeding with /etc/urandom.seed [ 16.006818] procd: - early - [ 16.009764] procd: - watchdog - [ 16.702876] procd: - watchdog - [ 16.707487] procd: - ubus - [ 16.763334] procd: - init - [ 17.743893] urngd: v1.0.2 started. [ 18.599406] kmodloader: loading kernel modules from /etc/modules.d/ [ 18.657282] NET: Registered PF_ALG protocol family [ 18.672333] async_tx: api initialized (async) [ 18.682242] NET: Registered PF_ATMPVC protocol family [ 18.687308] NET: Registered PF_ATMSVC protocol family [ 18.696642] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 18.709500] Key type dns_resolver registered [ 18.720749] RPC: Registered named UNIX socket transport module. [ 18.726664] RPC: Registered udp transport module. [ 18.731404] RPC: Registered tcp transport module. [ 18.736107] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.745506] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 18.752655] ntfs3: Max link count 4000 [ 18.756441] ntfs3: Enabled Linux POSIX ACLs support [ 18.761315] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this [ 18.769383] ntfs3: Read-only LZX/Xpress compression included [ 18.792035] tun: Universal TUN/TAP device driver, 1.6 [ 18.805280] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 18.813739] l2tp_core: L2TP core driver, V2.0 [ 18.818860] l2tp_netlink: L2TP netlink interface [ 18.826690] sctp: Hash tables configured (bind 256/256) [ 18.833170] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 18.840468] nat46: module (version 95ca1c3b99376da2d0306919f2df4a8d3c9bb78b) loaded. [ 18.851318] gre: GRE over IPv4 demultiplexor driver [ 18.857121] ip_gre: GRE over IPv4 tunneling driver [ 18.871413] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.880259] PPP generic driver version 2.4.2 [ 18.888066] NFS: Registering the id_resolver key type [ 18.893135] Key type id_resolver registered [ 18.897301] Key type id_legacy registered [ 18.929258] cryptodev: driver 1.12 loaded. [ 18.935407] i2c-gpio i2c-gpio-0: using lines 427 (SDA) and 428 (SCL) [ 18.942090] i2c-gpio i2c-gpio-1: using lines 429 (SDA) and 430 (SCL) [ 18.956262] GACT probability on [ 18.960167] Mirror/redirect action on [ 18.968177] u32 classifier [ 18.970887] input device check on [ 18.974532] Actions configured [ 18.983964] fuse: init (API version 7.34) [ 18.992090] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.3 [ 18.998175] usbcore: registered new interface driver GobiNet [ 19.005173] usbcore: registered new interface driver cdc_wdm [ 19.012052] usbcore: registered new interface driver qmi_wwan_q [ 19.019839] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0 [ 19.035291] Bridge firewalling registered [ 19.041247] usbcore: registered new interface driver cdc_acm [ 19.046923] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 19.055925] usbcore: registered new interface driver cdc_ether [ 19.063222] usbcore: registered new interface driver cdc_ncm [ 19.069493] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b [ 19.076971] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 [ 19.086097] usbcore: registered new interface driver huawei_cdc_ncm [ 19.146354] PPP MPPE Compression module registered [ 19.152026] NET: Registered PF_PPPOX protocol family [ 19.157767] PPTP driver version 0.8.5 [ 19.162939] usbcore: registered new interface driver qmi_wwan [ 19.170239] usbcore: registered new interface driver rndis_host [ 19.178071] sfp sfp1: Host maximum power 1.0W [ 19.183192] sfp sfp2: Host maximum power 1.0W [ 19.189333] usbcore: registered new interface driver sierra_net [ 19.201828] usbcore: registered new interface driver ums-alauda [ 19.208934] usbcore: registered new interface driver ums-cypress [ 19.216197] usbcore: registered new interface driver ums-datafab [ 19.223440] usbcore: registered new interface driver ums-freecom [ 19.230696] usbcore: registered new interface driver ums-isd200 [ 19.237917] usbcore: registered new interface driver ums-jumpshot [ 19.245178] usbcore: registered new interface driver ums-karma [ 19.252467] usbcore: registered new interface driver ums-sddr09 [ 19.259627] usbcore: registered new interface driver ums-sddr55 [ 19.266874] usbcore: registered new interface driver ums-usbat [ 19.275818] usbcore: registered new device driver usbip-host [ 19.283110] usbcore: registered new interface driver usblp [ 19.291362] usbcore: registered new interface driver usbserial_generic [ 19.297936] usbserial: USB Serial support registered for generic [ 19.305835] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 19.311771] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3 [ 19.318998] vhci_hcd: created sysfs vhci_hcd.0 [ 19.323784] hub 3-0:1.0: USB hub found [ 19.327558] hub 3-0:1.0: 8 ports detected [ 19.332002] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 19.337922] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 4 [ 19.345173] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 19.353570] hub 4-0:1.0: USB hub found [ 19.357337] hub 4-0:1.0: 8 ports detected [ 19.382432] xt_time: kernel timezone is -0000 [ 19.388170] usbcore: registered new interface driver yealink [ 19.395189] usbcore: registered new interface driver cdc_mbim [ 19.414496] usbcore: registered new interface driver ch341 [ 19.420075] usbserial: USB Serial support registered for ch341-uart [ 19.449111] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 19.517291] sfp sfp1: module ALCATELLUCENT G010SP rev 10 sn ALCLFAB7BD2D dc 171023 [ 19.923409] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20221012174743a [ 19.923409] [ 20.067171] mt7986-wmac 18000000.wmac: WM Firmware Version: ____000000, Build Time: 20221012174805 [ 20.107749] mt7986-wmac 18000000.wmac: WA Firmware Version: DEV_000000, Build Time: 20221012174937 [ 22.865337] usbcore: registered new interface driver snd-usb-audio [ 22.875567] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 22.883409] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 22.895570] batman_adv: B.A.T.M.A.N. advanced 2022.3-openwrt-1 (compatibility version 15) loaded [ 22.905640] usbcore: registered new interface driver option [ 22.911286] usbserial: USB Serial support registered for GSM modem (1-port) [ 22.919407] usbcore: registered new interface driver qcserial [ 22.925185] usbserial: USB Serial support registered for Qualcomm USB modem [ 22.932403] kmodloader: done loading kernel modules from /etc/modules.d/ [ 24.446631] /dev/ubiblock0_1: Can't open blockdev [ 24.451526] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 24.451616] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 1623 [ 24.686675] UBIFS (ubi0:2): recovery needed [ 25.159922] UBIFS (ubi0:2): recovery completed [ 25.160008] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 25.160015] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 25.160021] UBIFS (ubi0:2): FS size: 29839360 bytes (28 MiB, 235 LEBs), max 245 LEBs, journal size 1523712 bytes (1 MiB, 12 LEBs) [ 25.160028] UBIFS (ubi0:2): reserved for root: 1409386 bytes (1376 KiB) [ 25.160031] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID A626D3AC-6E6F-4F58-9630-AB9290803E46, small LPT model [ 26.959046] /dev/ubiblock0_1: Can't open blockdev [ 29.678246] hwmon hwmon3: temp1_input not attached to any thermal zone [ 30.308063] mtk_soc_eth 15100000.ethernet eth0: Link is Down [ 30.313084] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 30.313264] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 30.313334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.314251] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 30.317187] br-lan: port 1(lan1) entered blocking state [ 30.317195] br-lan: port 1(lan1) entered disabled state [ 30.318612] device lan1 entered promiscuous mode [ 30.318618] device eth0 entered promiscuous mode [ 30.326443] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 30.329255] br-lan: port 2(lan2) entered blocking state [ 30.329268] br-lan: port 2(lan2) entered disabled state [ 30.330911] device lan2 entered promiscuous mode [ 30.335127] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 30.338448] br-lan: port 3(lan3) entered blocking state [ 30.338461] br-lan: port 3(lan3) entered disabled state [ 30.340293] device lan3 entered promiscuous mode [ 30.344553] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode [ 30.347334] br-lan: port 4(lan4) entered blocking state [ 30.347346] br-lan: port 4(lan4) entered disabled state [ 30.349446] device lan4 entered promiscuous mode [ 30.353694] mt7530 mdio-bus:1f sfp2: configuring for inband/2500base-x link mode [ 30.354942] br-lan: port 5(sfp2) entered blocking state [ 30.354952] br-lan: port 5(sfp2) entered disabled state [ 30.357074] device sfp2 entered promiscuous mode [ 30.360417] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode [ 31.622295] br-lan: port 6(wlan0) entered blocking state [ 31.622321] br-lan: port 6(wlan0) entered disabled state [ 31.622522] device wlan0 entered promiscuous mode [ 32.720221] br-lan: port 7(wlan1) entered blocking state [ 32.720243] br-lan: port 7(wlan1) entered disabled state [ 32.720419] device wlan1 entered promiscuous mode [ 32.720516] br-lan: port 7(wlan1) entered blocking state [ 32.720522] br-lan: port 7(wlan1) entered forwarding state [ 32.737933] br-lan: port 7(wlan1) entered disabled state [ 34.000796] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.000951] br-lan: port 6(wlan0) entered blocking state [ 34.000964] br-lan: port 6(wlan0) entered forwarding state [ 34.001165] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 40.070628] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control off [ 40.070686] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 40.071047] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.41: link becomes ready [ 40.071218] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.46: link becomes ready [ 43.949691] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 43.949869] br-lan: port 7(wlan1) entered blocking state [ 43.949886] br-lan: port 7(wlan1) entered forwarding state [ 68.667265] ieee80211 phy0: WA: free done event [ 68.667265] 1022c380 [ 68.667265] len = 24 [ 68.667265] DW0 : 18 00 03 30 [ 68.667265] DW1 : 01 10 04 98 [ 68.667265] DW2 : 00 80 00 90 [ 68.667265] DW3 : 1c 70 00 41 [ 68.667265] DW4 : 00 80 01 00 [ 68.667265] DW5 : 1e 80 ff 3f [ 69.786309] overlayfs: filesystem on '/opt/docker/check-overlayfs-support2592970344/upper' not supported as upperdir [ 69.865097] overlayfs: filesystem on '/opt/docker/check-overlayfs-support3499376559/upper' not supported as upperdir [ 72.398613] pppoe-WAN1: renamed from ppp0 [ 82.334207] svc: failed to register nfsdv3 RPC service (errno 111).
关闭猫棒上的tty即可解决
ghhccghk
commented
1 year ago ghhccghk
commented
1 year ago
反馈bug/问题模板，提建议请删除
1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
2. 详细叙述
系统存在不稳定性，偶然可能导致重新启动，有的时候sfp模块划分的vlan无法正常连接，但是sfp模块信息可以正常获取
(1) 具体问题
A： 出现这个问题极有可能导致无线连接不上进而导致系统重新启动 [ 68.667265] ieee80211 phy0: WA: free done event [ 68.667265] 1022c380 [ 68.667265] len = 24 [ 68.667265] DW0 : 18 00 03 30 [ 68.667265] DW1 : 01 10 04 98 [ 68.667265] DW2 : 00 80 00 90 [ 68.667265] DW3 : 1c 70 00 41 [ 68.667265] DW4 : 00 80 01 00 [ 68.667265] DW5 : 1e 80 ff 3f
(2) 路由器型号和固件版本
A：
(3) 详细日志
A：``` [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.110 (ghhc@ghhccghk-pc) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r0-07ad0eef) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Wed May 17 07:55:31 2023 [ 0.000000] Machine model: Bananapi BPI-R3 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff] [ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff] [ 0.000000] node 0: [mem 0x000000004ffc0000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 17 pages/cpu s29592 r8192 d31848 u69632 [ 0.000000] pcpu-alloc: s29592 r8192 d31848 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Kernel command line: root=/dev/mmcblk0p65 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 2040640K/2097152K available (8192K kernel code, 888K rwdata, 2144K rodata, 384K init, 289K bss, 56512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000142] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.000150] pid_max: default: 32768 minimum: 301 [ 0.000233] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000245] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.001163] rcu: Hierarchical SRCU implementation. [ 0.001252] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.001466] smp: Bringing up secondary CPUs ... [ 0.001706] Detected VIPT I-cache on CPU1 [ 0.001730] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.001755] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.002021] Detected VIPT I-cache on CPU2 [ 0.002033] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 [ 0.002044] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.002269] Detected VIPT I-cache on CPU3 [ 0.002280] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000 [ 0.002288] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.002313] smp: Brought up 1 node, 4 CPUs [ 0.002327] SMP: Total of 4 processors activated. [ 0.002331] CPU features: detected: 32-bit EL0 Support [ 0.002334] CPU features: detected: CRC32 instructions [ 0.002409] CPU: All CPU(s) started at EL2 [ 0.002418] alternatives: patching kernel code [ 0.004801] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.004824] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.004939] pinctrl core: initialized pinctrl subsystem [ 0.005382] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.005604] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.005636] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.005664] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.005888] thermal_sys: Registered thermal governor 'fair_share' [ 0.005891] thermal_sys: Registered thermal governor 'bang_bang' [ 0.005894] thermal_sys: Registered thermal governor 'step_wise' [ 0.005897] thermal_sys: Registered thermal governor 'user_space' [ 0.006077] ASID allocator initialised with 65536 entries [ 0.006328] pstore: Registered ramoops as persistent store backend [ 0.006332] ramoops: using 0x10000@0x42ff0000, ecc: 0 [ 0.015092] cryptd: max_cpu_qlen set to 1000 [ 0.016832] SCSI subsystem initialized [ 0.016915] libata version 3.00 loaded. [ 0.017684] clocksource: Switched to clocksource arch_sys_counter [ 0.018098] NET: Registered PF_INET protocol family [ 0.018213] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.018762] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.018783] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.018791] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.018858] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.019032] TCP: Hash tables configured (established 16384 bind 16384) [ 0.019104] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.019131] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.019228] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.019250] PCI: CLS 0 bytes, default 64 [ 0.021058] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.023014] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.023026] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.045644] pwm-mediatek 10048000.pwm: clock: top fail: -517 [ 0.045933] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges: [ 0.045955] mtk-pcie-gen3 11280000.pcie: Parsing ranges property... [ 0.045964] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000 [ 0.046011] phy phy-soc:t-phy@11c00000.0: u3 auto load valid efuse: ENABLE with value: 1 [ 0.046039] phy phy-soc:t-phy@11c00000.0: pcie auto load valid efuse: ENABLE with value: 1 [ 0.046060] phy phy-soc:t-phy@11c00000.0: u3 lane1 efuse - intr 29, rx_imp f, tx_imp e [ 0.046143] /soc/pcie@11280000: Failed to get clk index: 0 ret: -517 [ 0.046154] mtk-pcie-gen3 11280000.pcie: failed to get clocks [ 0.048340] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.048920] printk: console [ttyS0] disabled [ 0.069080] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 122, base_baud = 2500000) is a ST16650V2 [ 0.764750] printk: console [ttyS0] enabled [ 0.789479] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 123, base_baud = 1625000) is a ST16650V2 [ 0.799312] mtk_rng 1020f000.trng: registered RNG driver [ 0.799371] hwrng: no data available [ 0.808216] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.816116] loop: module loaded [ 0.820314] spi-nand spi0.0: Winbond SPI NAND was found. [ 0.825622] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.833856] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.840197] Creating 4 MTD partitions on "spi0.0": [ 0.844971] 0x000000580000-0x000008000000 : "ubi" [ 0.972734] 0x000000380000-0x000000580000 : "fip" [ 0.979650] 0x000000080000-0x000000380000 : "reserved" [ 0.988108] 0x000000000000-0x000000080000 : "bl2" [ 1.130732] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc009600000, irq 134 [ 1.140481] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc009600000, irq 134 [ 1.150034] i2c_dev: i2c /dev entries driver [ 1.155685] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.164102] NET: Registered PF_INET6 protocol family [ 1.169655] Segment Routing with IPv6 [ 1.173329] In-situ OAM (IOAM) with IPv6 [ 1.177264] NET: Registered PF_PACKET protocol family [ 1.182334] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 1.195448] 8021q: 802.1Q VLAN Support v1.8 [ 1.200539] pstore: Using crash dump compression: deflate [ 1.211360] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges: [ 1.218709] mtk-pcie-gen3 11280000.pcie: Parsing ranges property... [ 1.224964] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000 [ 1.233433] phy phy-soc:t-phy@11c00000.0: u3 auto load valid efuse: ENABLE with value: 1 [ 1.241528] phy phy-soc:t-phy@11c00000.0: pcie auto load valid efuse: ENABLE with value: 1 [ 1.249790] phy phy-soc:t-phy@11c00000.0: u3 lane1 efuse - intr 29, rx_imp f, tx_imp e [ 1.331089] mmc0: new MMC card at address 0001 [ 1.336319] mmcblk0: mmc0:0001 008GB0 7.28 GiB [ 1.344913] Alternate GPT is invalid, using primary GPT. [ 1.351365] FIT: Default configuration: "config-mt7986a-bananapi-bpi-r3" (OpenWrt bananapi_bpi-r3) [ 1.360314] FIT: kernel sub-image 0x00001000 - 0x005059df "kernel-1" (ARM64 OpenWrt Linux-5.15.110) [ 1.370300] FIT: flat_dt sub-image 0x00506000 - 0x0050e000 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r3 device tree blob) [ 1.381591] FIT: flat_dt sub-image 0x0050e000 - 0x00516000 "fdt-mt7986a-bananapi-bpi-r3-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-nor) [ 1.397821] FIT: flat_dt sub-image 0x00516000 - 0x0051e000 "fdt-mt7986a-bananapi-bpi-r3-emmc-nor" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-nor) [ 1.414917] FIT: flat_dt sub-image 0x0051e000 - 0x00526000 "fdt-mt7986a-bananapi-bpi-r3-emmc-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-emmc-snand) [ 1.432357] FIT: flat_dt sub-image 0x00526000 - 0x0052e000 "fdt-mt7986a-bananapi-bpi-r3-snand" (ARM64 OpenWrt bananapi_bpi-r3 device tree overlay mt7986a-bananapi-bpi-r3-snand) [ 1.448931] FIT: filesystem sub-image 0x0052e000 - 0x07af9000 "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r3 rootfs) [ 1.459603] FIT: selecting configured loadable "rootfs-1" to be root filesystem [ 1.466896] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p65(rootfs-1) p66(rootfs_data) [ 1.474859] mmcblk0boot0: mmc0:0001 008GB0 4.00 MiB [ 1.480639] mmcblk0boot1: mmc0:0001 008GB0 4.00 MiB [ 1.481593] mtk-pcie-gen3 11280000.pcie: PCIe link down, ltssm reg val: 0x1000001 [ 1.485790] mmcblk0rpmb: mmc0:0001 008GB0 4.00 MiB, chardev (251:0) [ 1.493113] mtk-pcie-gen3: probe of 11280000.pcie failed with error -110 [ 1.528439] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode [ 1.535577] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 1.544519] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=142) [ 1.564334] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=143) [ 1.583926] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=144) [ 1.603476] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=145) [ 1.623020] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=146) [ 1.633648] DSA: tree 0 setup [ 1.638801] UBI: auto-attach mtd0 [ 1.642117] ubi0: default fastmap pool size: 45 [ 1.646630] ubi0: default fastmap WL pool size: 22 [ 1.651430] ubi0: attaching mtd0 [ 5.264303] ubi0: scanning is finished [ 5.309292] ubi0: attached mtd0 (name "ubi", size 122 MiB) [ 5.314771] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 5.321636] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 5.328408] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 5.335347] ubi0: good PEBs: 980, bad PEBs: 0, corrupted PEBs: 0 [ 5.341336] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [ 5.348539] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1650113974 [ 5.357645] ubi0: available PEBs: 465, total reserved PEBs: 515, PEBs reserved for bad PEB handling: 20 [ 5.367018] ubi0: background thread "ubi_bgt0d" started, PID 470 [ 5.378986] block ubiblock0_1: created from ubi0:1(rootfs) [ 5.393787] VFS: Mounted root (squashfs filesystem) readonly on device 259:0. [ 5.401056] Freeing unused kernel memory: 384K [ 5.477743] Run /sbin/init as init process [ 5.481823] with arguments: [ 5.484773] /sbin/init [ 5.487464] with environment: [ 5.490597] HOME=/ [ 5.492941] TERM=linux [ 5.807036] init: Console is alive [ 5.810547] init: - watchdog - [ 7.130843] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 7.226368] Key type encrypted registered [ 7.234137] usbcore: registered new interface driver usbfs [ 7.239666] usbcore: registered new interface driver hub [ 7.244993] usbcore: registered new device driver usb [ 7.251295] raid6: skip pq benchmark and using algorithm neonx8 [ 7.257215] raid6: using neon recovery algorithm [ 7.262504] xor: measuring software checksum speed [ 7.269797] 8regs : 3951 MB/sec [ 7.276239] 32regs : 4678 MB/sec [ 7.283050] arm64_neon : 3986 MB/sec [ 7.287389] xor: using function: 32regs (4678 MB/sec) [ 7.300096] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 7.315558] SGI XFS with security attributes, no debug enabled [ 7.324507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.331756] fsl-ehci: Freescale EHCI Host controller driver [ 7.337969] ehci-platform: EHCI generic platform driver [ 7.344778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.351538] ohci-platform: OHCI generic platform driver [ 7.357607] uhci_hcd: USB Universal Host Controller Interface driver [ 7.366909] phy phy-soc:t-phy@11e10000.1: u2 auto load valid efuse: ENABLE with value: 1 [ 7.375068] phy phy-soc:t-phy@11e10000.2: u3 auto load valid efuse: ENABLE with value: 1 [ 7.383201] phy phy-soc:t-phy@11e10000.3: u2 auto load valid efuse: ENABLE with value: 1 [ 7.391743] xhci-mtk 11200000.usb: xHCI Host Controller [ 7.396973] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1 [ 7.407429] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010 [ 7.416617] xhci-mtk 11200000.usb: irq 126, io mem 0x11200000 [ 7.422436] xhci-mtk 11200000.usb: xHCI Host Controller [ 7.427647] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2 [ 7.435029] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed [ 7.442509] hub 1-0:1.0: USB hub found [ 7.446263] hub 1-0:1.0: 2 ports detected [ 7.450574] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 7.458899] hub 2-0:1.0: USB hub found [ 7.462647] hub 2-0:1.0: 1 port detected [ 7.470787] usbcore: registered new interface driver usb-storage [ 7.477539] usbcore: registered new interface driver uas [ 7.483176] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 7.495794] init: - preinit - [ 7.897696] usb 1-1: new high-speed USB device number 2 using xhci-mtk [ 8.078408] hub 1-1:1.0: USB hub found [ 8.082187] hub 1-1:1.0: 4 ports detected [ 8.094433] random: procd: uninitialized urandom read (4 bytes read) [ 8.373527] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 8.382001] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 8.397861] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 11.367938] random: crng init done [ 12.632520] mount_root: loading kmods from internal overlay [ 12.654245] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 12.664551] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 14.354797] F2FS-fs (mmcblk0p66): Mounted with checkpoint version = 1666a7cb [ 14.362014] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab [ 14.378099] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 14.388373] mount_root: switched to extroot [ 14.401525] urandom-seed: Seeding with /etc/urandom.seed [ 16.006818] procd: - early - [ 16.009764] procd: - watchdog - [ 16.702876] procd: - watchdog - [ 16.707487] procd: - ubus - [ 16.763334] procd: - init - [ 17.743893] urngd: v1.0.2 started. [ 18.599406] kmodloader: loading kernel modules from /etc/modules.d/ [ 18.657282] NET: Registered PF_ALG protocol family [ 18.672333] async_tx: api initialized (async) [ 18.682242] NET: Registered PF_ATMPVC protocol family [ 18.687308] NET: Registered PF_ATMSVC protocol family [ 18.696642] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 18.709500] Key type dns_resolver registered [ 18.720749] RPC: Registered named UNIX socket transport module. [ 18.726664] RPC: Registered udp transport module. [ 18.731404] RPC: Registered tcp transport module. [ 18.736107] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.745506] ntfs: driver 2.1.32 [Flags: R/O MODULE]. [ 18.752655] ntfs3: Max link count 4000 [ 18.756441] ntfs3: Enabled Linux POSIX ACLs support [ 18.761315] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this [ 18.769383] ntfs3: Read-only LZX/Xpress compression included [ 18.792035] tun: Universal TUN/TAP device driver, 1.6 [ 18.805280] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 18.813739] l2tp_core: L2TP core driver, V2.0 [ 18.818860] l2tp_netlink: L2TP netlink interface [ 18.826690] sctp: Hash tables configured (bind 256/256) [ 18.833170] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 18.840468] nat46: module (version 95ca1c3b99376da2d0306919f2df4a8d3c9bb78b) loaded. [ 18.851318] gre: GRE over IPv4 demultiplexor driver [ 18.857121] ip_gre: GRE over IPv4 tunneling driver [ 18.871413] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.880259] PPP generic driver version 2.4.2 [ 18.888066] NFS: Registering the id_resolver key type [ 18.893135] Key type id_resolver registered [ 18.897301] Key type id_legacy registered [ 18.929258] cryptodev: driver 1.12 loaded. [ 18.935407] i2c-gpio i2c-gpio-0: using lines 427 (SDA) and 428 (SCL) [ 18.942090] i2c-gpio i2c-gpio-1: using lines 429 (SDA) and 430 (SCL) [ 18.956262] GACT probability on [ 18.960167] Mirror/redirect action on [ 18.968177] u32 classifier [ 18.970887] input device check on [ 18.974532] Actions configured [ 18.983964] fuse: init (API version 7.34) [ 18.992090] GobiNet: Quectel_Linux&Android_GobiNet_Driver_V1.6.3 [ 18.998175] usbcore: registered new interface driver GobiNet [ 19.005173] usbcore: registered new interface driver cdc_wdm [ 19.012052] usbcore: registered new interface driver qmi_wwan_q [ 19.019839] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0 [ 19.035291] Bridge firewalling registered [ 19.041247] usbcore: registered new interface driver cdc_acm [ 19.046923] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 19.055925] usbcore: registered new interface driver cdc_ether [ 19.063222] usbcore: registered new interface driver cdc_ncm [ 19.069493] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b [ 19.076971] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 [ 19.086097] usbcore: registered new interface driver huawei_cdc_ncm [ 19.146354] PPP MPPE Compression module registered [ 19.152026] NET: Registered PF_PPPOX protocol family [ 19.157767] PPTP driver version 0.8.5 [ 19.162939] usbcore: registered new interface driver qmi_wwan [ 19.170239] usbcore: registered new interface driver rndis_host [ 19.178071] sfp sfp1: Host maximum power 1.0W [ 19.183192] sfp sfp2: Host maximum power 1.0W [ 19.189333] usbcore: registered new interface driver sierra_net [ 19.201828] usbcore: registered new interface driver ums-alauda [ 19.208934] usbcore: registered new interface driver ums-cypress [ 19.216197] usbcore: registered new interface driver ums-datafab [ 19.223440] usbcore: registered new interface driver ums-freecom [ 19.230696] usbcore: registered new interface driver ums-isd200 [ 19.237917] usbcore: registered new interface driver ums-jumpshot [ 19.245178] usbcore: registered new interface driver ums-karma [ 19.252467] usbcore: registered new interface driver ums-sddr09 [ 19.259627] usbcore: registered new interface driver ums-sddr55 [ 19.266874] usbcore: registered new interface driver ums-usbat [ 19.275818] usbcore: registered new device driver usbip-host [ 19.283110] usbcore: registered new interface driver usblp [ 19.291362] usbcore: registered new interface driver usbserial_generic [ 19.297936] usbserial: USB Serial support registered for generic [ 19.305835] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 19.311771] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 3 [ 19.318998] vhci_hcd: created sysfs vhci_hcd.0 [ 19.323784] hub 3-0:1.0: USB hub found [ 19.327558] hub 3-0:1.0: 8 ports detected [ 19.332002] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 19.337922] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 4 [ 19.345173] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 19.353570] hub 4-0:1.0: USB hub found [ 19.357337] hub 4-0:1.0: 8 ports detected [ 19.382432] xt_time: kernel timezone is -0000 [ 19.388170] usbcore: registered new interface driver yealink [ 19.395189] usbcore: registered new interface driver cdc_mbim [ 19.414496] usbcore: registered new interface driver ch341 [ 19.420075] usbserial: USB Serial support registered for ch341-uart [ 19.449111] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 19.517291] sfp sfp1: module ALCATELLUCENT G010SP rev 10 sn ALCLFAB7BD2D dc 171023
[ 19.923409] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20221012174743a [ 19.923409] [ 20.067171] mt7986-wmac 18000000.wmac: WM Firmware Version: ____000000, Build Time: 20221012174805 [ 20.107749] mt7986-wmac 18000000.wmac: WA Firmware Version: DEV_000000, Build Time: 20221012174937 [ 22.865337] usbcore: registered new interface driver snd-usb-audio [ 22.875567] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 22.883409] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld Jason@zx2c4.com. All Rights Reserved. [ 22.895570] batman_adv: B.A.T.M.A.N. advanced 2022.3-openwrt-1 (compatibility version 15) loaded [ 22.905640] usbcore: registered new interface driver option [ 22.911286] usbserial: USB Serial support registered for GSM modem (1-port) [ 22.919407] usbcore: registered new interface driver qcserial [ 22.925185] usbserial: USB Serial support registered for Qualcomm USB modem [ 22.932403] kmodloader: done loading kernel modules from /etc/modules.d/ [ 24.446631] /dev/ubiblock0_1: Can't open blockdev [ 24.451526] UBIFS (ubi0:2): Mounting in unauthenticated mode [ 24.451616] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 1623 [ 24.686675] UBIFS (ubi0:2): recovery needed [ 25.159922] UBIFS (ubi0:2): recovery completed [ 25.160008] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [ 25.160015] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 25.160021] UBIFS (ubi0:2): FS size: 29839360 bytes (28 MiB, 235 LEBs), max 245 LEBs, journal size 1523712 bytes (1 MiB, 12 LEBs) [ 25.160028] UBIFS (ubi0:2): reserved for root: 1409386 bytes (1376 KiB) [ 25.160031] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID A626D3AC-6E6F-4F58-9630-AB9290803E46, small LPT model [ 26.959046] /dev/ubiblock0_1: Can't open blockdev [ 29.678246] hwmon hwmon3: temp1_input not attached to any thermal zone [ 30.308063] mtk_soc_eth 15100000.ethernet eth0: Link is Down [ 30.313084] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 30.313264] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 30.313334] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 30.314251] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 30.317187] br-lan: port 1(lan1) entered blocking state [ 30.317195] br-lan: port 1(lan1) entered disabled state [ 30.318612] device lan1 entered promiscuous mode [ 30.318618] device eth0 entered promiscuous mode [ 30.326443] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 30.329255] br-lan: port 2(lan2) entered blocking state [ 30.329268] br-lan: port 2(lan2) entered disabled state [ 30.330911] device lan2 entered promiscuous mode [ 30.335127] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 30.338448] br-lan: port 3(lan3) entered blocking state [ 30.338461] br-lan: port 3(lan3) entered disabled state [ 30.340293] device lan3 entered promiscuous mode [ 30.344553] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode [ 30.347334] br-lan: port 4(lan4) entered blocking state [ 30.347346] br-lan: port 4(lan4) entered disabled state [ 30.349446] device lan4 entered promiscuous mode [ 30.353694] mt7530 mdio-bus:1f sfp2: configuring for inband/2500base-x link mode [ 30.354942] br-lan: port 5(sfp2) entered blocking state [ 30.354952] br-lan: port 5(sfp2) entered disabled state [ 30.357074] device sfp2 entered promiscuous mode [ 30.360417] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode [ 31.622295] br-lan: port 6(wlan0) entered blocking state [ 31.622321] br-lan: port 6(wlan0) entered disabled state [ 31.622522] device wlan0 entered promiscuous mode [ 32.720221] br-lan: port 7(wlan1) entered blocking state [ 32.720243] br-lan: port 7(wlan1) entered disabled state [ 32.720419] device wlan1 entered promiscuous mode [ 32.720516] br-lan: port 7(wlan1) entered blocking state [ 32.720522] br-lan: port 7(wlan1) entered forwarding state [ 32.737933] br-lan: port 7(wlan1) entered disabled state [ 34.000796] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.000951] br-lan: port 6(wlan0) entered blocking state [ 34.000964] br-lan: port 6(wlan0) entered forwarding state [ 34.001165] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 40.070628] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control off [ 40.070686] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 40.071047] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.41: link becomes ready [ 40.071218] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.46: link becomes ready [ 43.949691] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 43.949869] br-lan: port 7(wlan1) entered blocking state [ 43.949886] br-lan: port 7(wlan1) entered forwarding state [ 68.667265] ieee80211 phy0: WA: free done event [ 68.667265] 1022c380 [ 68.667265] len = 24 [ 68.667265] DW0 : 18 00 03 30 [ 68.667265] DW1 : 01 10 04 98 [ 68.667265] DW2 : 00 80 00 90 [ 68.667265] DW3 : 1c 70 00 41 [ 68.667265] DW4 : 00 80 01 00 [ 68.667265] DW5 : 1e 80 ff 3f [ 69.786309] overlayfs: filesystem on '/opt/docker/check-overlayfs-support2592970344/upper' not supported as upperdir [ 69.865097] overlayfs: filesystem on '/opt/docker/check-overlayfs-support3499376559/upper' not supported as upperdir [ 72.398613] pppoe-WAN1: renamed from ppp0 [ 82.334207] svc: failed to register nfsdv3 RPC service (errno 111).