f1owkang
commented
5 months ago 这里是LEDE编译固件刷入之后产生的日志，刚启动之后一会儿死机 [ 13.747209] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 13.747397] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab [ 13.754892] block: unable to load configuration (fstab: Entry not found) [ 13.761536] block: attempting to load /tmp/ext4_cfg/etc/config/fstab [ 13.768399] block: unable to load configuration (fstab: Entry not found) [ 13.774797] block: attempting to load /etc/config/fstab [ 13.783414] block: unable to load configuration (fstab: Entry not found) [ 13.786336] block: no usable configuration [ 13.793605] EXT4-fs (loop0): unmounting filesystem. [ 13.798546] loop0: detected capacity change from 0 to 231464 [ 13.851367] loop0: detected capacity change from 231464 to 102568 [ 13.855040] EXT4-fs (loop0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 13.979154] block: attempting to load /tmp/ext4_cfg/upper/etc/config/fstab [ 13.979248] block: unable to load configuration (fstab: Entry not found) [ 13.985015] block: attempting to load /tmp/ext4_cfg/etc/config/fstab [ 13.991930] block: unable to load configuration (fstab: Entry not found) [ 13.998150] block: attempting to load /etc/config/fstab [ 14.004854] block: unable to load configuration (fstab: Entry not found) [ 14.009778] block: no usable configuration [ 14.017653] mount_root: overlay filesystem has not been fully initialized yet [ 14.021417] mount_root: switching to ext4 overlay [ 14.030894] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 14.037720] urandom-seed: Seed file not found (/etc/urandom.seed) Scanning for Btrfs filesystems [ 14.459796] procd: - early - [ 14.459899] procd: - watchdog - [ 15.080391] procd: - watchdog - [ 15.132556] procd: - ubus - [ 15.322555] procd: - init - Please press Enter to activate this console. [ 15.833179] urngd: v1.0.2 started. [ 16.466189] kmodloader: loading kernel modules from /etc/modules.d/* [ 16.557935] NET: Registered PF_ALG protocol family [ 16.568800] FS-Cache: Loaded [ 16.570006] CacheFiles: Loaded [ 16.572523] Key type dns_resolver registered [ 16.605932] NET: Registered PF_RXRPC protocol family [ 16.605970] Key type rxrpc registered [ 16.609961] Key type rxrpc_s registered [ 16.616170] kAFS: Red Hat AFS client v0.1 registering. [ 16.751369] kAFS: failed to register: -97 [ 16.857637] tun: Universal TUN/TAP device driver, 1.6 [ 16.868229] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 16.961197] cryptodev: driver 1.13 loaded. [ 16.964768] ntfs3: Max link count 4000 [ 16.964805] ntfs3: Enabled Linux POSIX ACLs support [ 17.001160] Bridge firewalling registered [ 17.001820] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b [ 17.004157] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 [ 17.059383] NET: Registered PF_QIPCRTR protocol family [ 17.065238] usbcore: registered new interface driver ums-alauda [ 17.066312] usbcore: registered new interface driver ums-cypress [ 17.071008] usbcore: registered new interface driver ums-datafab [ 17.077195] usbcore: registered new interface driver ums-freecom [ 17.083212] usbcore: registered new interface driver ums-isd200 [ 17.089119] usbcore: registered new interface driver ums-jumpshot [ 17.094726] usbcore: registered new interface driver ums-karma [ 17.101121] usbcore: registered new interface driver ums-sddr09 [ 17.106786] usbcore: registered new interface driver ums-sddr55 [ 17.112674] usbcore: registered new interface driver ums-usbat [ 17.130302] xt_time: kernel timezone is -0000 [ 17.150693] PPP generic driver version 2.4.2 [ 17.151764] PPP MPPE Compression module registered [ 17.154976] NET: Registered PF_PPPOX protocol family [ 17.166919] ath11k c000000.wifi: ipq6018 hw1.0 [ 17.166954] ath11k c000000.wifi: FW memory mode: 1 [ 17.170581] remoteproc remoteproc0: powering up cd00000.remoteproc [ 17.175964] remoteproc remoteproc0: Booting fw image IPQ6018/q6_fw.mdt, size 7340 [ 17.857692] remoteproc remoteproc0: remote processor cd00000.remoteproc is now up [ 17.858944] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [ 17.864794] ath11k c000000.wifi: chip_id 0x0 chip_family 0x4 board_id 0xff soc_id 0xffffffff [ 17.870253] ath11k c000000.wifi: fw_version 0x250a04b8 fw_build_timestamp 2021-12-20 07:20 fw_build_id WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 [ 17.879404] kAFS: Red Hat AFS client v0.1 registering. [ 18.071383] kAFS: failed to register: -97 [ 18.241740] kmodloader: 1 module could not be probed [ 18.241859] kmodloader: - kafs - 0 [ 37.794262] EXT4-fs (mmcblk0p22): recovery complete [ 37.794305] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Quota mode: disabled. [ 37.797972] ext4 filesystem being mounted at /mnt/mmcblk0p22 supports timestamps until 2038 (0x7fffffff) [ 37.810312] EXT4-fs (mmcblk0p24): recovery complete [ 37.816633] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Quota mode: disabled. [ 37.829309] EXT4-fs (mmcblk0p25): recovery complete [ 37.830249] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Quota mode: disabled. [ 41.626789] nss-dp 3a001200.dp2 lan1: PHY Link up speed: 1000 [ 41.627480] br-lan: port 1(lan1) entered blocking state [ 41.631585] br-lan: port 1(lan1) entered disabled state [ 41.636790] device lan1 entered promiscuous mode [ 41.650593] br-lan: port 2(lan2) entered blocking state [ 41.650642] br-lan: port 2(lan2) entered disabled state [ 41.654981] device lan2 entered promiscuous mode [ 41.664561] br-lan: port 3(lan3) entered blocking state [ 41.664711] br-lan: port 3(lan3) entered disabled state [ 41.669908] device lan3 entered promiscuous mode [ 42.495757] br-lan: port 4(wlan0) entered blocking state [ 42.495801] br-lan: port 4(wlan0) entered disabled state [ 42.500428] device wlan0 entered promiscuous mode [ 42.505657] br-lan: port 4(wlan0) entered blocking state [ 42.510044] br-lan: port 4(wlan0) entered forwarding state [ 42.515679] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 42.623170] br-lan: port 5(wlan1) entered blocking state [ 42.623214] br-lan: port 5(wlan1) entered disabled state [ 42.627771] device wlan1 entered promiscuous mode [ 42.632999] br-lan: port 5(wlan1) entered blocking state [ 42.637453] br-lan: port 5(wlan1) entered forwarding state [ 42.642989] br-lan: port 1(lan1) entered blocking state [ 42.648140] br-lan: port 1(lan1) entered forwarding state [ 42.654162] br-lan: port 4(wlan0) entered disabled state [ 42.664157] br-lan: port 5(wlan1) entered disabled state [ 42.726623] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 42.726813] br-lan: port 5(wlan1) entered blocking state [ 42.732080] br-lan: port 5(wlan1) entered forwarding state [ 43.030759] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 43.030984] br-lan: port 4(wlan0) entered blocking state [ 43.036290] br-lan: port 4(wlan0) entered forwarding state [ 51.610773] qcom-q6v5-wcss-pil cd00000.remoteproc: fatal error received: [ 51.610773] QC Image Version: QC_IMAGE_VERSION_STRING=WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 [ 51.610773] Image Variant : IMAGE_VARIANT_STRING=6018.wlanfw.evalQ [ 51.610773] [ 51.610773] NOC_error.c:474 NOCError: FATAL ERRORparam0 :zero, param1 :zero, param2 :zero. [ 51.610773] Thread ID : 0x0000006f Thread name : ABTIST182 Process ID : 0 [ 51.610773] Register: [ 51.610773] SP : 0x4af81ef8 [ 51.610773] FP : 0x4af81f00 [ 51.610773] PC : 0x4ac8d548 [ 51.610773] SSR : 0x00000008 [ 51.610773] BADVA : 0x00020000 [ 51.610773] LR : 0x4ac8cce4 [ 51.610773] [ 51.610773] Stack Dump [ 51.610773] from : 0x4af81ef8 [ 51.610773] to : 0x4af81fd0 [ 51.610773] [ 51.657671] remoteproc remoteproc0: crash detected in cd00000.remoteproc: type fatal error [ 51.679940] remoteproc remoteproc0: handling crash #1 in cd00000.remoteproc [ 51.687965] remoteproc remoteproc0: recovering cd00000.remoteproc
Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC_IMAGE_VERSION_STRING=BOOT.XF.0.3-00077-IPQ60xxLZB-2 S - IMAGE_VARIANT_STRING=IPQ6018LA S - OEM_IMAGE_VERSION_STRING=crm-ubuntu64 S - Boot Interface: eMMC S - Secure Boot: Off S - Boot Config @ 0x000a602c = 0x000002e3 S - JTAG ID @ 0x000a607c = 0x001390e1 S - OEM ID @ 0x000a6080 = 0x00000000 S - Serial Number @ 0x000a4128 = 0x3f7c9a2a S - OEM Config Row 0 @ 0x000a4188 = 0x0000000000000000 S - OEM Config Row 1 @ 0x000a4190 = 0x0000000000000000 S - Feature Config Row 0 @ 0x000a4130 = 0x0000800018200021 S - Feature Config Row 1 @ 0x000a4138 = 0x02c3e83783000009 S - PBL Patch Ver: 1 S - I-cache: On S - D-cache: On B - 3413 - PBL, Start B - 592 - bootable_media_detect_entry, Start B - 4339 - bootable_media_detect_success, Start B - 32254 - elf_loader_entry, Start B - 32425 - auth_hash_seg_entry, Start B - 33407 - auth_hash_seg_exit, Start B - 33904 - elf_segs_hash_verify_entry, Start B - 61721 - elf_segs_hash_verify_exit, Start B - 66147 - auth_xbl_sec_hash_seg_entry, Start B - 66289 - auth_xbl_sec_hash_seg_exit, Start B - 72834 - xbl_sec_segs_hash_verify_entry, Start B - 72835 - xbl_sec_segs_hash_verify_exit, Start B - 73764 - PBL, End B - 65239 - SBL1, Start B - 205295 - GCC [RstStat:0x2, RstDbg:0x420100] WDog Stat : 0x4 B - 207735 - clock_init, Start D - 2897 - clock_init, Delta B - 216367 - boot_flash_init, Start D - 55022 - boot_flash_init, Delta B - 274683 - sbl1_ddr_set_default_params, Start D - 244 - sbl1_ddr_set_default_params, Delta B - 281118 - boot_config_data_table_init, Start D - 2165 - boot_config_data_table_init, Delta - (575 Bytes) B - 290268 - CDT Version:2,Platform ID:8,Major ID:3,Minor ID:2,Subtype:0 B - 295819 - Image Load, Start D - 6588 - OEM_MISC Image Loaded, Delta - (0 Bytes) B - 305152 - Image Load, Start D - 5063 - PMIC Image Loaded, Delta - (0 Bytes) B - 313021 - sbl1_ddr_set_params, Start B - 317993 - CPR configuration: 0x366 B - 321195 - Pre_DDR_clock_init, Start D - 213 - Pre_DDR_clock_init, Delta D - 0 - sbl1_ddr_set_params, Delta
FreshKai
详细叙述
听您说是uboot 参数问题，我尝试自己修复了RA5的设备树。但是无法编译通过，又尝试移植了https://github.com/JiaY-shi/openwrt 的仓库，也是出现很多问题例如
CC drivers/thermal/thermal_trip.o drivers/thermal/thermal_trip.c: In function '__thermal_zone_get_trip': drivers/thermal/thermal_trip.c:118:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation] 118 | if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip) | ^~ drivers/thermal/thermal_trip.c:121:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 121 | if (tz->trips) { | ^~种种无奈请求大佬修复或者指点一下，感激不尽重复 issue
具体型号
RA50
详细日志
lede正常编译，编译固件无法启动