京东亚瑟云ax1800 pro编译好后无法通过uboot安装

[jeasonliang]

详细叙述

京东亚瑟云ax1800pro 128G 已经开启了ssh 通过面包多买了coolsonowwolf老大的Uboot,成功刷入了,网上试验了下istoreos的系统,,可以使用,自行利用github Actions编译也成功了,但是在uboot上传编译好的lede固件一直亮红灯,无法启用, 有没有类似故障的朋友? .config的配置文件如下:(篇幅有限,我只贴架构 等重要的) #

Automatically generated file; DO NOT EDIT.

OpenWrt Configuration

# CONFIG_MODULES=y CONFIG_HAVE_DOT_CONFIG=y CONFIG_HOST_OS_LINUX=y CONFIG_TARGET_qualcommax=y CONFIG_TARGET_qualcommax_ipq60xx=y CONFIG_TARGET_qualcommax_ipq60xx_DEVICE_jdcloud_re-ss-01=y CONFIG_HAS_SUBTARGETS=y CONFIG_HAS_DEVICES=y CONFIG_TARGET_BOARD="qualcommax" CONFIG_TARGET_SUBTARGET="ipq60xx" CONFIG_TARGET_PROFILE="DEVICE_jdcloud_re-ss-01" CONFIG_TARGET_ARCH_PACKAGES="aarch64_cortex-a53" CONFIG_DEFAULT_TARGET_OPTIMIZATION="-Os -pipe -mcpu=cortex-a53" CONFIG_CPU_TYPE="cortex-a53" CONFIG_LINUX_6_1=y CONFIG_DEFAULT_ath11k-firmware-ipq6018=y CONFIG_DEFAULT_autocore-arm=y CONFIG_DEFAULT_base-files=y CONFIG_DEFAULT_block-mount=y CONFIG_DEFAULT_busybox=y CONFIG_DEFAULT_ca-bundle=y CONFIG_DEFAULT_ca-certificates=y CONFIG_DEFAULT_coremark=y CONFIG_DEFAULT_curl=y CONFIG_DEFAULT_ddns-scripts_aliyun=y CONFIG_DEFAULT_ddns-scripts_dnspod=y CONFIG_DEFAULT_default-settings=y CONFIG_DEFAULT_dnsmasq-full=y CONFIG_DEFAULT_dropbear=y CONFIG_DEFAULT_e2fsprogs=y CONFIG_DEFAULT_firewall=y CONFIG_DEFAULT_fstools=y CONFIG_DEFAULT_ip-full=y CONFIG_DEFAULT_ipq-wifi-jdcloud_ax1800pro=y CONFIG_DEFAULT_ipset=y CONFIG_DEFAULT_iptables=y CONFIG_DEFAULT_iptables-mod-extra=y CONFIG_DEFAULT_iptables-mod-tproxy=y CONFIG_DEFAULT_iwinfo=y CONFIG_DEFAULT_kmod-ath11k-ahb=y CONFIG_DEFAULT_kmod-fs-ext4=y CONFIG_DEFAULT_kmod-gpio-button-hotplug=y CONFIG_DEFAULT_kmod-ipt-raw=y CONFIG_DEFAULT_kmod-leds-gpio=y CONFIG_DEFAULT_kmod-nf-nathelper=y CONFIG_DEFAULT_kmod-nf-nathelper-extra=y CONFIG_DEFAULT_kmod-qca-nss-dp=y CONFIG_DEFAULT_kmod-qca-nss-drv=y CONFIG_DEFAULT_kmod-qca-nss-drv-bridge-mgr=y CONFIG_DEFAULT_kmod-qca-nss-drv-pppoe=y CONFIG_DEFAULT_kmod-qca-nss-drv-vlan=y CONFIG_DEFAULT_kmod-qca-nss-ecm=y CONFIG_DEFAULT_kmod-qca-ssdk=y CONFIG_DEFAULT_kmod-tun=y CONFIG_DEFAULT_kmod-usb-dwc3=y CONFIG_DEFAULT_kmod-usb-dwc3-qcom=y CONFIG_DEFAULT_kmod-usb3=y CONFIG_DEFAULT_libc=y CONFIG_DEFAULT_libgcc=y CONFIG_DEFAULT_libustream-openssl=y CONFIG_DEFAULT_logd=y CONFIG_DEFAULT_losetup=y CONFIG_DEFAULT_luci=y CONFIG_DEFAULT_luci-app-accesscontrol=y CONFIG_DEFAULT_luci-app-arpbind=y CONFIG_DEFAULT_luci-app-autoreboot=y CONFIG_DEFAULT_luci-app-ddns=y CONFIG_DEFAULT_luci-app-filetransfer=y CONFIG_DEFAULT_luci-app-nlbwmon=y CONFIG_DEFAULT_luci-app-ssr-plus=y CONFIG_DEFAULT_luci-app-turboacc=y CONFIG_DEFAULT_luci-app-upnp=y CONFIG_DEFAULT_luci-app-vlmcsd=y CONFIG_DEFAULT_luci-app-vsftpd=y CONFIG_DEFAULT_luci-app-wol=y CONFIG_DEFAULT_mtd=y CONFIG_DEFAULT_netifd=y CONFIG_DEFAULT_nss-firmware-ipq6018=y CONFIG_DEFAULT_opkg=y CONFIG_DEFAULT_ppp=y CONFIG_DEFAULT_ppp-mod-pppoe=y CONFIG_DEFAULT_procd=y CONFIG_DEFAULT_procd-ujail=y CONFIG_DEFAULT_uboot-envtools=y CONFIG_DEFAULT_uci=y CONFIG_DEFAULT_uclient-fetch=y CONFIG_DEFAULT_urandom-seed=y CONFIG_DEFAULT_urngd=y CONFIG_DEFAULT_wpad-openssl=y CONFIG_HAS_FPU=y CONFIG_AUDIO_SUPPORT=y CONFIG_GPIO_SUPPORT=y CONFIG_PCI_SUPPORT=y CONFIG_PCIE_SUPPORT=y CONFIG_USB_SUPPORT=y CONFIG_RTC_SUPPORT=y CONFIG_USES_DEVICETREE=y CONFIG_USES_INITRAMFS=y CONFIG_USES_SQUASHFS=y CONFIG_EMMC_SUPPORT=y CONFIG_NAND_SUPPORT=y CONFIG_ARCH_64BIT=y CONFIG_VIRTIO_SUPPORT=y CONFIG_aarch64=y CONFIG_ARCH="aarch64"

#

Target Images

# CONFIG_TARGET_ROOTFS_INITRAMFS=y CONFIG_TARGET_INITRAMFS_COMPRESSION_ZSTD=y CONFIG_EXTERNAL_CPIO="" #

Root filesystem images

#

CONFIG_TARGET_ROOTFS_EXT4FS is not set

CONFIG_TARGET_ROOTFS_SQUASHFS=y CONFIG_TARGET_SQUASHFS_BLOCK_SIZE=1024 CONFIG_TARGET_UBIFS_FREE_SPACE_FIXUP=y CONFIG_TARGET_UBIFS_JOURNAL_SIZE=""

#

Image Options

#

CONFIG_TARGET_ROOTFS_PERSIST_VAR is not set

end of Target Images

CONFIG_EXPERIMENTAL is not set

#

Global build settings

# CONFIG_JSON_OVERVIEW_IMAGE_INFO=y

CONFIG_ALL_NONSHARED is not set

CONFIG_ALL_KMODS is not set

CONFIG_ALL is not set

CONFIG_BUILDBOT is not set

CONFIG_SIGNED_PACKAGES=y CONFIG_SIGNATURE_CHECK=y CONFIG_DOWNLOAD_CHECK_CERTIFICATE=y

#

General build options

#

CONFIG_DISPLAY_SUPPORT is not set

CONFIG_BUILD_PATENTED is not set

CONFIG_BUILD_NLS is not set

CONFIG_SHADOW_PASSWORDS=y

CONFIG_CLEAN_IPKG is not set

CONFIG_IPK_FILES_CHECKSUMS is not set

CONFIG_INCLUDE_CONFIG is not set

CONFIG_REPRODUCIBLE_DEBUG_INFO is not set

CONFIG_COLLECT_KERNEL_DEBUG is not set

#

Kernel build options

# CONFIG_KERNEL_BUILD_USER="" CONFIG_KERNEL_BUILD_DOMAIN="" CONFIG_KERNEL_PRINTK=y CONFIG_KERNEL_SWAP=y

CONFIG_KERNEL_PROC_STRIPPED is not set

CONFIG_KERNEL_DEBUG_FS=y

CONFIG_KERNEL_ARM_PMU is not set

CONFIG_KERNEL_PERF_EVENTS is not set

CONFIG_KERNEL_PROFILING is not set

CONFIG_KERNEL_UBSAN is not set

CONFIG_KERNEL_KASAN is not set

CONFIG_KERNEL_KCOV is not set

CONFIG_KERNEL_TASKSTATS is not set

CONFIG_KERNEL_KALLSYMS=y

CONFIG_KERNEL_FTRACE is not set

CONFIG_KERNEL_DEBUG_KERNEL=y CONFIG_KERNEL_DEBUG_INFO=y CONFIG_KERNEL_DEBUG_INFO_REDUCED=y CONFIG_KERNEL_FRAME_WARN=2048

CONFIG_KERNEL_DEBUG_VIRTUAL is not set

CONFIG_KERNEL_DYNAMIC_DEBUG is not set

CONFIG_KERNEL_KPROBES is not set

CONFIG_KERNEL_BPF_EVENTS is not set

CONFIG_KERNEL_AIO=y CONFIG_KERNEL_IO_URING=y CONFIG_KERNEL_FHANDLE=y CONFIG_KERNEL_FANOTIFY=y

CONFIG_KERNEL_BLK_DEV_BSG is not set

CONFIG_KERNEL_HUGETLBFS is not set

CONFIG_KERNEL_HUGETLB_PAGE is not set

CONFIG_KERNEL_MAGIC_SYSRQ=y

CONFIG_KERNEL_DEBUG_PINCTRL is not set

CONFIG_KERNEL_DEBUG_GPIO is not set

CONFIG_KERNEL_COREDUMP=y CONFIG_KERNEL_ELF_CORE=y

CONFIG_KERNEL_PROVE_LOCKING is not set

CONFIG_KERNEL_SOFTLOCKUP_DETECTOR is not set

CONFIG_KERNEL_DETECT_HUNG_TASK is not set

CONFIG_KERNEL_WQ_WATCHDOG is not set

CONFIG_KERNEL_DEBUG_ATOMIC_SLEEP is not set

CONFIG_KERNEL_DEBUG_VM is not set

CONFIG_KERNEL_PRINTK_TIME=y

CONFIG_KERNEL_SLABINFO is not set

CONFIG_KERNEL_PROC_PAGE_MONITOR is not set

CONFIG_KERNEL_KEXEC is not set

CONFIG_USE_RFKILL is not set

CONFIG_USE_SPARSE is not set

CONFIG_KERNEL_DEVTMPFS is not set

CONFIG_KERNEL_KEYS=y

CONFIG_KERNEL_PERSISTENT_KEYRINGS is not set

CONFIG_KERNEL_KEYS_REQUEST_CACHE is not set

CONFIG_KERNEL_BIG_KEYS is not set

CONFIG_KERNEL_CGROUPS=y

CONFIG_KERNEL_CGROUP_DEBUG is not set

CONFIG_KERNEL_FREEZER=y

CONFIG_KERNEL_CGROUP_FREEZER is not set

CONFIG_KERNEL_CGROUP_DEVICE is not set

CONFIG_KERNEL_CGROUP_HUGETLB is not set

CONFIG_KERNEL_CGROUP_PIDS=y CONFIG_KERNEL_CGROUP_RDMA=y CONFIG_KERNEL_CGROUP_BPF=y CONFIG_KERNEL_CPUSETS=y

CONFIG_KERNEL_PROC_PID_CPUSET is not set

CONFIG_KERNEL_CGROUP_CPUACCT=y CONFIG_KERNEL_RESOURCE_COUNTERS=y CONFIG_KERNEL_MM_OWNER=y CONFIG_KERNEL_MEMCG=y CONFIG_KERNEL_MEMCG_SWAP=y

CONFIG_KERNEL_MEMCG_SWAP_ENABLED is not set

CONFIG_KERNEL_MEMCG_KMEM=y

CONFIG_KERNEL_CGROUP_PERF is not set

CONFIG_KERNEL_CGROUP_SCHED=y CONFIG_KERNEL_FAIR_GROUP_SCHED=y CONFIG_KERNEL_CFS_BANDWIDTH=y CONFIG_KERNEL_RT_GROUP_SCHED=y CONFIG_KERNEL_BLK_CGROUP=y

CONFIG_KERNEL_CFQ_GROUP_IOSCHED is not set

CONFIG_KERNEL_BLK_DEV_THROTTLING=y

CONFIG_KERNEL_BLK_DEV_THROTTLING_LOW is not set

CONFIG_KERNEL_DEBUG_BLK_CGROUP is not set

CONFIG_KERNEL_NET_CLS_CGROUP is not set

CONFIG_KERNEL_CGROUP_NET_CLASSID is not set

CONFIG_KERNEL_CGROUP_NET_PRIO is not set

CONFIG_KERNEL_NAMESPACES=y CONFIG_KERNEL_UTS_NS=y CONFIG_KERNEL_IPC_NS=y CONFIG_KERNEL_USER_NS=y CONFIG_KERNEL_PID_NS=y CONFIG_KERNEL_NET_NS=y CONFIG_KERNEL_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_KERNEL_POSIX_MQUEUE=y CONFIG_KERNEL_SECCOMP_FILTER=y CONFIG_KERNEL_SECCOMP=y CONFIG_KERNEL_IP_MROUTE=y CONFIG_KERNEL_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_KERNEL_IP_PIMSM_V1=y CONFIG_KERNEL_IP_PIMSM_V2=y CONFIG_KERNEL_MPTCP=y CONFIG_KERNEL_IPV6=y CONFIG_KERNEL_IPV6_MULTIPLE_TABLES=y CONFIG_KERNEL_IPV6_SUBTREES=y CONFIG_KERNEL_IPV6_MROUTE=y CONFIG_KERNEL_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_KERNEL_IPV6_PIMSM_V2=y CONFIG_KERNEL_IPV6_SEG6_LWTUNNEL=y

CONFIG_KERNEL_LWTUNNEL_BPF is not set

CONFIG_KERNEL_MPTCP_IPV6=y

重复 issue

• [X] 没有类似的 issue

具体型号

京东亚瑟云ax1800pro 128G

详细日志

编译成功了的

[coolsnowwolf]

recovery 安装

[jeasonliang]

recovery 安装成功,但是无法保存配置,更改好后,openwt一断电重新启动就又恢复到了初始状态!

[Cipher2020]

recovery 安装成功,但是无法保存配置,更改好后,openwt一断电重新启动就又恢复到了初始状态!

请教一下 “recovery 安装”是怎么操作的啊。因为我现在遇到的情况跟是一摸一样，能编译，但是刷不上

[jeasonliang]

recovery 安装成功,但是无法保存配置,更改好后,openwt一断电重新启动就又恢复到了初始状态!

请教一下 “recovery 安装”是怎么操作的啊。因为我现在遇到的情况跟是一摸一样，能编译，但是刷不上

编译后有个openwrt-qualcommax-ipq60xx-jdcloud_re-ss-01-squashfs-recovery.bin的文件 在Uboot界面下 上传刷机

[Cipher2020]

recovery 安装成功,但是无法保存配置,更改好后,openwt一断电重新启动就又恢复到了初始状态!

请教一下 “recovery 安装”是怎么操作的啊。因为我现在遇到的情况跟是一摸一样，能编译，但是刷不上

编译后有个openwrt-qualcommax-ipq60xx-jdcloud_re-ss-01-squashfs-recovery.bin的文件 在Uboot界面下 上传刷机

谢谢，我试试看。

[forzaseb]

recovery 安装成功,但是无法保存配置,更改好后,openwt一断电重新启动就又恢复到了初始状态!

target/linux/qualcommax/image/ipq60xx.mk 23行后面加入IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata这一行试试，我的AX5JDC是这样解决的

[hulisang]

亚瑟的设备名不是jdc_ax1800_pro吗，为什么config里是jdcloud_re-ss-01