redmi-router-ax6000无WIFI信号问题

详细叙述

使用最新源码编译 6.6.37内核终端找不到路由器的WIFI信号;手机电脑均找不到路由器后台可以看到无线选项和网卡均正常

重复 issue

[X] 没有类似的 issue

具体型号

redmi-router-ax6000

详细日志

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.6.37 (runner@fv-az1114-140) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r6747-7ecb40bb3) 11.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Sat Jul 13 15:02:08 2024 [ 0.000000] Machine model: Xiaomi Redmi Router AX6000 [ 0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000 [ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000 [ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000 [ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000 [ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000 [ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff] [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff] [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff] [ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff] [ 0.000000] node 0: [mem 0x000000004ffc0000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 18 pages/cpu s34920 r8192 d30616 u73728 [ 0.000000] pcpu-alloc: s34920 r8192 d30616 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 firmware=1 uart_en=1 [ 0.000000] Unknown kernel command line parameters "firmware=1 uart_en=1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 0MB [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000005fcc7000-0x000000005fdc7000] (1MB) [ 0.000000] Memory: 495880K/524288K available (8640K kernel code, 916K rwdata, 2516K rodata, 384K init, 291K bss, 28408K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 640 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns [ 0.000055] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000) [ 0.000062] pid_max: default: 32768 minimum: 301 [ 0.002065] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.002072] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.003636] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.004021] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.004123] rcu: Hierarchical SRCU implementation. [ 0.004126] rcu: Max phase no-delay instances is 1000. [ 0.004427] smp: Bringing up secondary CPUs ... [ 0.004685] Detected VIPT I-cache on CPU1 [ 0.004720] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000 [ 0.004749] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005036] Detected VIPT I-cache on CPU2 [ 0.005056] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000 [ 0.005067] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005325] Detected VIPT I-cache on CPU3 [ 0.005343] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000 [ 0.005352] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005379] smp: Brought up 1 node, 4 CPUs [ 0.005383] SMP: Total of 4 processors activated. [ 0.005386] CPU features: detected: 32-bit EL0 Support [ 0.005388] CPU features: detected: CRC32 instructions [ 0.005413] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.005415] CPU: All CPU(s) started at EL2 [ 0.005417] alternatives: applying system-wide alternatives [ 0.007630] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.007646] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.008515] pinctrl core: initialized pinctrl subsystem [ 0.009314] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.009830] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.009849] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.009864] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.010180] thermal_sys: Registered thermal governor 'fair_share' [ 0.010183] thermal_sys: Registered thermal governor 'bang_bang' [ 0.010185] thermal_sys: Registered thermal governor 'step_wise' [ 0.010187] thermal_sys: Registered thermal governor 'user_space' [ 0.010238] ASID allocator initialised with 65536 entries [ 0.010828] pstore: Using crash dump compression: deflate [ 0.010832] pstore: Registered ramoops as persistent store backend [ 0.010834] ramoops: using 0x10000@0x42ff0000, ecc: 0 [ 0.015874] Modules: 29552 pages in range for non-PLT usage [ 0.015884] Modules: 521072 pages in range for PLT usage [ 0.016795] cryptd: max_cpu_qlen set to 1000 [ 0.018236] SCSI subsystem initialized [ 0.018320] libata version 3.00 loaded. [ 0.019299] clocksource: Switched to clocksource arch_sys_counter [ 0.020945] NET: Registered PF_INET protocol family [ 0.021026] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.021839] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.021848] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.021855] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.021881] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.021968] TCP: Hash tables configured (established 4096 bind 4096) [ 0.022210] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear) [ 0.022289] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.022300] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.022432] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.022458] PCI: CLS 0 bytes, default 64 [ 0.023395] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.026601] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.026606] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.050663] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.051694] printk: console [ttyS0] disabled [ 0.072020] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2 [ 0.072059] printk: console [ttyS0] enabled [ 0.858485] mtk_rng 1020f000.rng: registered RNG driver [ 0.866720] loop: module loaded [ 0.871393] spi-nand spi0.0: ESMT SPI NAND was found. [ 0.876442] spi-nand spi0.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64 [ 0.885090] Signature found at block 1023 [0x07fe0000] [ 0.890231] NMBM management region starts at block 960 [0x07800000] [ 0.898055] First info table with writecount 0 found in block 960 [ 0.908911] Second info table with writecount 0 found in block 963 [ 0.915093] NMBM has been successfully attached [ 0.919876] 8 fixed-partitions partitions found on MTD device spi0.0 [ 0.926220] Creating 8 MTD partitions on "spi0.0": [ 0.931005] 0x000000000000-0x000000100000 : "BL2" [ 0.936749] 0x000000100000-0x000000140000 : "Nvram" [ 0.942121] 0x000000140000-0x000000180000 : "Bdata" [ 0.947434] 0x000000180000-0x000000380000 : "Factory" [ 0.954131] 0x000000380000-0x000000580000 : "FIP" [ 0.960421] 0x000000580000-0x0000005c0000 : "crash" [ 0.965726] 0x0000005c0000-0x000000600000 : "crash_log" [ 0.971418] 0x000000600000-0x000007400000 : "ubi" [ 1.183546] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc081580000, irq 121 [ 1.193244] i2c_dev: i2c /dev entries driver [ 1.198777] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0) [ 1.207507] NET: Registered PF_INET6 protocol family [ 1.213194] Segment Routing with IPv6 [ 1.216869] In-situ OAM (IOAM) with IPv6 [ 1.220839] NET: Registered PF_PACKET protocol family [ 1.225943] 8021q: 802.1Q VLAN Support v1.8 [ 1.298256] mt7530-mdio mdio-bus:1f: configuring for fixed/2500base-x link mode [ 1.307281] mt7530-mdio mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 1.316662] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=125) [ 1.337140] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=126) [ 1.357239] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=127) [ 1.377336] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=128) [ 1.388403] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode [ 1.395123] DSA: tree 0 setup [ 1.398696] UBI: auto-attach mtd7 [ 1.402027] ubi0: default fastmap pool size: 40 [ 1.406541] ubi0: default fastmap WL pool size: 20 [ 1.411324] ubi0: attaching mtd7 [ 2.039342] ubi0: scanning is finished [ 2.051742] ubi0: attached mtd7 (name "ubi", size 110 MiB) [ 2.057225] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 2.064092] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 2.070863] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 2.077803] ubi0: good PEBs: 880, bad PEBs: 0, corrupted PEBs: 0 [ 2.083793] ubi0: user volume: 4, internal volumes: 1, max. volumes count: 128 [ 2.090997] ubi0: max/mean erase counter: 50/30, WL threshold: 4096, image sequence number: 1698608956 [ 2.100279] ubi0: available PEBs: 0, total reserved PEBs: 880, PEBs reserved for bad PEB handling: 19 [ 2.109483] ubi0: background thread "ubi_bgt0d" started, PID 545 [ 2.117091] block ubiblock0_1: created from ubi0:1(fit) [ 2.123885] block ubiblock0_2: created from ubi0:2(rootfs) [ 2.129376] ubiblock: device ubiblock0_2 (rootfs) set to be root filesystem [ 2.136396] clk: Disabling unused clocks [ 2.147822] VFS: Mounted root (squashfs filesystem) readonly on device 254:1. [ 2.155086] Freeing unused kernel memory: 384K [ 2.159576] Run /sbin/init as init process [ 2.163656] with arguments: [ 2.166607] /sbin/init [ 2.169309] with environment: [ 2.172434] HOME=/ [ 2.174779] TERM=linux [ 2.177470] firmware=1 [ 2.180184] uart_en=1 [ 2.579320] random: crng init done [ 2.672711] init: Console is alive [ 2.676209] init: - watchdog - [ 3.266875] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 3.366131] gpio_button_hotplug: loading out-of-tree module taints kernel. [ 3.376786] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 3.384652] init: - preinit - [ 4.386737] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 4.395237] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 8.669897] mount_root: loading kmods from internal overlay [ 8.684316] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 8.693769] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 9.008625] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 9.015503] block: unable to load configuration (fstab: Entry not found) [ 9.022225] block: attempting to load /tmp/overlay/etc/config/fstab [ 9.028509] block: unable to load configuration (fstab: Entry not found) [ 9.035219] block: attempting to load /etc/config/fstab [ 9.043980] block: unable to load configuration (fstab: Entry not found) [ 9.050768] block: no usable configuration [ 9.057315] UBIFS (ubi0:3): Mounting in unauthenticated mode [ 9.063050] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 627 [ 9.107554] UBIFS (ubi0:3): recovery needed [ 9.207798] UBIFS (ubi0:3): recovery completed [ 9.212316] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data" [ 9.220132] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.230025] UBIFS (ubi0:3): FS size: 72884224 bytes (69 MiB, 574 LEBs), max 584 LEBs, journal size 3682304 bytes (3 MiB, 29 LEBs) [ 9.241651] UBIFS (ubi0:3): reserved for root: 3442501 bytes (3361 KiB) [ 9.248246] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID BC142A0A-0658-48B4-A7EF-47D5423FAA1D, small LPT model [ 9.261861] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 9.275444] block: extroot: not configured [ 9.279653] UBIFS (ubi0:3): un-mount UBI device 0 [ 9.284354] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" stops [ 9.294020] UBIFS (ubi0:3): Mounting in unauthenticated mode [ 9.299753] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 630 [ 9.408607] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "rootfs_data" [ 9.416431] UBIFS (ubi0:3): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 9.426327] UBIFS (ubi0:3): FS size: 72884224 bytes (69 MiB, 574 LEBs), max 584 LEBs, journal size 3682304 bytes (3 MiB, 29 LEBs) [ 9.437952] UBIFS (ubi0:3): reserved for root: 3442501 bytes (3361 KiB) [ 9.444549] UBIFS (ubi0:3): media format: w5/r0 (latest is w5/r0), UUID BC142A0A-0658-48B4-A7EF-47D5423FAA1D, small LPT model [ 9.461018] mount_root: loading kmods from internal overlay [ 9.472905] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 9.482917] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 9.587376] block: attempting to load /tmp/overlay/upper/etc/config/fstab [ 9.598686] block: extroot: not configured [ 9.604256] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab [ 9.611340] block: extroot: not configured [ 9.618059] mount_root: switching to ubifs overlay [ 9.634099] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [ 9.657412] urandom-seed: Seed file not found (/etc/urandom.seed) [ 9.745570] procd: - early - [ 9.748502] procd: - watchdog - [ 10.355234] procd: - watchdog - [ 10.363900] procd: - ubus - [ 10.523424] procd: - init - [ 11.273176] kmodloader: loading kernel modules from /etc/modules.d/ [ 11.363148] urngd: v1.0.2 started. [ 11.432766] NET: Registered PF_ALG protocol family [ 11.442112] tun: Universal TUN/TAP device driver, 1.6 [ 11.465135] cryptodev: driver 1.13 loaded. [ 11.471859] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0 [ 11.499102] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b [ 11.506589] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36 [ 11.526915] xt_time: kernel timezone is -0000 [ 11.900129] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221012174648a [ 11.900129] [ 12.102223] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221012174725 [ 12.143245] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221012174937 [ 12.249578] mt798x-wmac 18000000.wifi: registering led 'mt76-phy0' [ 12.257766] mt798x-wmac 18000000.wifi: registering led 'mt76-phy1' [ 16.093763] PPP generic driver version 2.4.2 [ 16.098784] PPP MPPE Compression module registered [ 16.104211] NET: Registered PF_PPPOX protocol family [ 16.118324] kmodloader: done loading kernel modules from /etc/modules.d/ [ 18.784751] mtk_soc_eth 15100000.ethernet eth0: Link is Down [ 18.802564] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 18.811011] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 18.811813] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode [ 18.830866] br-lan: port 1(lan2) entered blocking state [ 18.833081] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 18.836093] br-lan: port 1(lan2) entered disabled state [ 18.849322] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode [ 18.855586] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode [ 18.865151] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode [ 18.874173] br-lan: port 1(lan2) entered blocking state [ 18.879404] br-lan: port 1(lan2) entered forwarding state [ 18.888099] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode [ 18.898819] br-lan: port 2(lan3) entered blocking state [ 18.904053] br-lan: port 2(lan3) entered disabled state [ 18.909302] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode [ 18.917163] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode [ 18.926482] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode [ 18.937188] br-lan: port 3(lan4) entered blocking state [ 18.942423] br-lan: port 3(lan4) entered disabled state [ 18.947663] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode [ 18.955761] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode [ 18.966228] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode [ 18.988136] mt7530-mdio mdio-bus:1f wan: Link is Up - 100Mbps/Full - flow control off [ 30.604256] br-lan: port 1(lan2) entered disabled state [ 30.610572] mt7530-mdio mdio-bus:1f lan2: left allmulticast mode [ 30.616589] mt7530-mdio mdio-bus:1f lan2: left promiscuous mode [ 30.622647] br-lan: port 1(lan2) entered disabled state [ 30.671425] mt7530-mdio mdio-bus:1f lan2: Link is Down [ 30.679488] mt7530-mdio mdio-bus:1f lan3: left allmulticast mode [ 30.685489] mt7530-mdio mdio-bus:1f lan3: left promiscuous mode [ 30.691474] br-lan: port 2(lan3) entered disabled state [ 30.731764] mt7530-mdio mdio-bus:1f lan4: left allmulticast mode [ 30.737763] mtk_soc_eth 15100000.ethernet eth0: left allmulticast mode [ 30.744289] mt7530-mdio mdio-bus:1f lan4: left promiscuous mode [ 30.750239] br-lan: port 3(lan4) entered disabled state [ 30.966414] mt7530-mdio mdio-bus:1f wan: Link is Down [ 30.973368] mtk_soc_eth 15100000.ethernet eth0: Link is Down [ 32.427146] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode [ 32.435895] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 32.436477] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode [ 32.455639] br-lan: port 1(lan2) entered blocking state [ 32.460865] br-lan: port 1(lan2) entered disabled state [ 32.466086] mt7530-mdio mdio-bus:1f lan2: entered allmulticast mode [ 32.472350] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode [ 32.481622] mt7530-mdio mdio-bus:1f lan2: entered promiscuous mode [ 32.493382] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode [ 32.504372] br-lan: port 2(lan3) entered blocking state [ 32.509637] br-lan: port 2(lan3) entered disabled state [ 32.514888] mt7530-mdio mdio-bus:1f lan3: entered allmulticast mode [ 32.522581] mt7530-mdio mdio-bus:1f lan3: entered promiscuous mode [ 32.531911] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode [ 32.542831] br-lan: port 3(lan4) entered blocking state [ 32.548043] br-lan: port 3(lan4) entered disabled state [ 32.553279] mt7530-mdio mdio-bus:1f lan4: entered allmulticast mode [ 32.561036] mt7530-mdio mdio-bus:1f lan4: entered promiscuous mode [ 32.570664] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode [ 34.293490] mt7530-mdio mdio-bus:1f wan: Link is Up - 100Mbps/Full - flow control off [ 34.943168] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx [ 34.951113] br-lan: port 1(lan2) entered blocking state [ 34.956323] br-lan: port 1(lan2) entered forwarding state

coolsnowwolf / lede