请问这是什么问题 mac format error: : ## mac num = 0

反馈bug/问题模板，提建议请删除

1.关于你要提交的问题

Q：是否搜索了issue (使用 "x" 选择)

[x ] 没有类似的issue

2. 详细叙述

(1) 具体问题

A：启动出现这个错误 [ 11.972887] #########show app status########## [ 11.974063] [ 11.974063] [ 11.974063] [ 11.991844] config size: 45,data = { "op": 4, "data": { "mac_list": [ ":" ] } } [ 11.991844] [ 11.993921] mac format error: : [ 11.994833] ## mac num = 0

(2) 路由器型号和固件版本

A：OpenWrt R20.7.20 / LuCI Master (git-20.223.26773-d18ef13)，PVE直通网卡虚拟openwrt

(3) 详细日志

A：[ 0.000000] Linux version 5.4.51 (runner@fv-az195) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0-46524d9)) #0 SMP Mon Aug 17 17:41:42 2020 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=a16a0916-fda4-0be8-ba4c-cfdf3c25ac02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'

[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffddfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bffde000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 23d5001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 2954925861868 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000010] tsc: Detected 2294.674 MHz processor [ 0.002375] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002377] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002381] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.002409] MTRR default type: write-back [ 0.002410] MTRR fixed ranges enabled: [ 0.002411] 00000-9FFFF write-back [ 0.002412] A0000-BFFFF uncachable [ 0.002412] C0000-FFFFF write-protect [ 0.002413] MTRR variable ranges enabled: [ 0.002414] 0 base 00C0000000 mask FFC0000000 uncachable [ 0.002415] 1 disabled [ 0.002415] 2 disabled [ 0.002415] 3 disabled [ 0.002416] 4 disabled [ 0.002416] 5 disabled [ 0.002417] 6 disabled [ 0.002417] 7 disabled [ 0.012792] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.022938] last_pfn = 0xbffde max_arch_pfn = 0x400000000 [ 0.033681] found SMP MP-table at [mem 0x000f5a80-0x000f5a8f] [ 0.033769] Using GB pages for direct mapping [ 0.034061] ACPI: Early table checksum verification disabled [ 0.034084] ACPI: RSDP 0x00000000000F5880 000014 (v00 BOCHS ) [ 0.034092] ACPI: RSDT 0x00000000BFFE15A0 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.034100] ACPI: FACP 0x00000000BFFE139A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.034106] ACPI: DSDT 0x00000000BFFDF040 00235A (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.034110] ACPI: FACS 0x00000000BFFDF000 000040 [ 0.034114] ACPI: APIC 0x00000000BFFE140E 000090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.034118] ACPI: SSDT 0x00000000BFFE149E 0000CA (v01 BOCHS VMGENID 00000001 BXPC 00000001) [ 0.034122] ACPI: HPET 0x00000000BFFE1568 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.034139] ACPI: Local APIC address 0xfee00000 [ 0.034323] Zone ranges: [ 0.034325] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.034326] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.034329] Normal [mem 0x0000000100000000-0x000000013fffffff] [ 0.034331] Movable zone start for each node [ 0.034331] Early memory node ranges [ 0.034333] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.034336] node 0: [mem 0x0000000000100000-0x00000000bffddfff] [ 0.034337] node 0: [mem 0x0000000100000000-0x000000013fffffff] [ 0.034349] Zeroed struct page in unavailable ranges: 132 pages [ 0.034351] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff] [ 0.034352] On node 0 totalpages: 1048444 [ 0.034357] DMA zone: 64 pages used for memmap [ 0.034357] DMA zone: 21 pages reserved [ 0.034358] DMA zone: 3998 pages, LIFO batch:0 [ 0.034408] DMA32 zone: 12224 pages used for memmap [ 0.034409] DMA32 zone: 782302 pages, LIFO batch:63 [ 0.043928] Normal zone: 4096 pages used for memmap [ 0.043929] Normal zone: 262144 pages, LIFO batch:63 [ 0.048065] ACPI: PM-Timer IO Port: 0x608 [ 0.048068] ACPI: Local APIC address 0xfee00000 [ 0.048086] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.048136] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.048164] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.048166] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.048167] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.048173] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.048174] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.048176] ACPI: IRQ0 used by override. [ 0.048177] ACPI: IRQ5 used by override. [ 0.048178] ACPI: IRQ9 used by override. [ 0.048178] ACPI: IRQ10 used by override. [ 0.048179] ACPI: IRQ11 used by override. [ 0.048181] Using ACPI (MADT) for SMP configuration information [ 0.048184] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.048192] TSC deadline timer available [ 0.048200] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.048217] KVM setup pv sched yield [ 0.048244] [mem 0xc0000000-0xfeffbfff] available for PCI devices [ 0.048245] Booting paravirtualized kernel on KVM [ 0.048253] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.048262] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.048451] percpu: Embedded 42 pages/cpu s133208 r8192 d30632 u524288 [ 0.048455] pcpu-alloc: s133208 r8192 d30632 u524288 alloc=1*2097152 [ 0.048456] pcpu-alloc: [0] 0 1 2 3 [ 0.048478] KVM setup async PF for cpu 0 [ 0.048484] kvm-stealtime: cpu 0, msr 13bc17040 [ 0.048489] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.048499] Built 1 zonelists, mobility grouping on. Total pages: 1032039 [ 0.048500] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=a16a0916-fda4-0be8-ba4c-cfdf3c25ac02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd [ 0.048801] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.048918] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.049016] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.063789] Memory: 4032812K/4193776K available (12290K kernel code, 575K rwdata, 2896K rodata, 1088K init, 2332K bss, 160964K reserved, 0K cma-reserved) [ 0.063859] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.063878] Kernel/User page tables isolation: enabled [ 0.063954] rcu: Hierarchical RCU implementation. [ 0.063955] rcu: CONFIG_RCU_FANOUT set to non-default value of 32. [ 0.063956] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.063960] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.063961] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.063976] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.064375] random: get_random_bytes called from start_kernel+0x2eb/0x567 with crng_init=0 [ 0.078198] Console: colour VGA+ 80x25 [ 0.130517] printk: console [tty0] enabled [ 0.193747] printk: console [ttyS0] enabled [ 0.194682] ACPI: Core revision 20190816 [ 0.195736] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.197707] APIC: Switch to symmetric I/O mode setup [ 0.199070] x2apic enabled [ 0.200135] Switched APIC routing to physical x2apic. [ 0.201177] KVM setup pv IPIs [ 0.203450] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.204669] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21138e1d4be, max_idle_ns: 440795314416 ns [ 0.207369] Calibrating delay loop (skipped) preset value.. 4589.34 BogoMIPS (lpj=9178696) [ 0.209084] pid_max: default: 32768 minimum: 301 [ 0.211416] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.213096] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.215595] x86/cpu: User Mode Instruction Prevention (UMIP) activated [ 0.216926] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.218006] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.219172] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.219372] Spectre V2 : Mitigation: Full generic retpoline [ 0.220489] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.223369] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.224685] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.226420] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.227372] SRBDS: Unknown: Dependent on hypervisor status [ 0.228474] MDS: Mitigation: Clear CPU buffers [ 0.231381] Freeing SMP alternatives memory: 36K [ 0.235271] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1268L v3 @ 2.30GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ 0.235367] Performance Events: Haswell events, Intel PMU driver. [ 0.235375] ... version: 2 [ 0.236635] ... bit width: 48 [ 0.237908] ... generic registers: 4 [ 0.239175] ... value mask: 0000ffffffffffff [ 0.239371] ... max period: 000000007fffffff [ 0.240821] ... fixed-purpose events: 3 [ 0.242087] ... event mask: 000000070000000f [ 0.243419] rcu: Hierarchical SRCU implementation. [ 0.244868] smp: Bringing up secondary CPUs ... [ 0.246491] x86: Booting SMP configuration: [ 0.247376] .... node #0, CPUs: #1 [ 0.135142] kvm-clock: cpu 1, msr 23d5041, secondary cpu clock [ 0.249054] KVM setup async PF for cpu 1 [ 0.249054] kvm-stealtime: cpu 1, msr 13bc97040 [ 0.253342] #2 [ 0.135142] kvm-clock: cpu 2, msr 23d5081, secondary cpu clock [ 0.254825] KVM setup async PF for cpu 2 [ 0.254825] kvm-stealtime: cpu 2, msr 13bd17040 [ 0.259086] #3 [ 0.135142] kvm-clock: cpu 3, msr 23d50c1, secondary cpu clock [ 0.259934] KVM setup async PF for cpu 3 [ 0.259934] kvm-stealtime: cpu 3, msr 13bd97040 [ 0.265312] smp: Brought up 1 node, 4 CPUs [ 0.267259] smpboot: Max logical packages: 1 [ 0.267378] smpboot: Total of 4 processors activated (18357.39 BogoMIPS) [ 0.272204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.274972] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.275456] pinctrl core: initialized pinctrl subsystem [ 0.277224] NET: Registered protocol family 16 [ 0.278878] cpuidle: using governor ladder [ 0.278878] KVM setup pv remote TLB flush [ 0.278878] ACPI: bus type PCI registered [ 0.279386] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.281695] PCI: Using configuration type 1 for base access [ 0.283368] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 0.290266] cryptd: max_cpu_qlen set to 1000 [ 0.293051] ACPI: Added _OSI(Module Device) [ 0.294382] ACPI: Added _OSI(Processor Device) [ 0.295381] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.296787] ACPI: Added _OSI(Processor Aggregator Device) [ 0.298272] ACPI: Added _OSI(Linux-Dell-Video) [ 0.299376] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.301019] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.303802] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.306592] ACPI: Interpreter enabled [ 0.307379] ACPI: (supports S0 S5) [ 0.308577] ACPI: Using IOAPIC for interrupt routing [ 0.310026] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.311561] ACPI: Enabled 3 GPEs in block 00 to 0F [ 0.318133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.319387] acpi PNP0A03:00: _OSC: OS supports [Segments MSI HPX-Type3] [ 0.321210] acpiphp: Slot [3] registered [ 0.322511] acpiphp: Slot [4] registered [ 0.323402] acpiphp: Slot [5] registered [ 0.324701] acpiphp: Slot [6] registered [ 0.325997] acpiphp: Slot [7] registered [ 0.327294] acpiphp: Slot [8] registered [ 0.327416] acpiphp: Slot [9] registered [ 0.328731] acpiphp: Slot [10] registered [ 0.330058] acpiphp: Slot [11] registered [ 0.331372] acpiphp: Slot [12] registered [ 0.332684] acpiphp: Slot [13] registered [ 0.333994] acpiphp: Slot [14] registered [ 0.335310] acpiphp: Slot [15] registered [ 0.335399] acpiphp: Slot [16] registered [ 0.336714] acpiphp: Slot [17] registered [ 0.338032] acpiphp: Slot [18] registered [ 0.339340] acpiphp: Slot [19] registered [ 0.339400] acpiphp: Slot [20] registered [ 0.341411] acpiphp: Slot [21] registered [ 0.342735] acpiphp: Slot [22] registered [ 0.343417] acpiphp: Slot [23] registered [ 0.344735] acpiphp: Slot [24] registered [ 0.346044] acpiphp: Slot [25] registered [ 0.347363] acpiphp: Slot [26] registered [ 0.347401] acpiphp: Slot [27] registered [ 0.348711] acpiphp: Slot [28] registered [ 0.350027] acpiphp: Slot [29] registered [ 0.351350] PCI host bridge to bus 0000:00 [ 0.351374] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.353074] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.354757] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.355372] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.357745] pci_bus 0000:00: root bus resource [mem 0x140000000-0x1bfffffff window] [ 0.359372] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.360912] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.363090] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.364150] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.368079] pci 0000:00:01.1: reg 0x20: [io 0xe0a0-0xe0af] [ 0.370542] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.371373] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.373018] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.374759] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.375585] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300 [ 0.379603] pci 0000:00:01.2: reg 0x20: [io 0xe000-0xe01f] [ 0.382395] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.384531] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.386902] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.387687] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.391289] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfcffffff pref] [ 0.395030] pci 0000:00:02.0: reg 0x18: [mem 0xfea34000-0xfea34fff] [ 0.402695] pci 0000:00:02.0: reg 0x30: [mem 0xfea20000-0xfea2ffff pref] [ 0.403812] pci 0000:00:03.0: [1af4:1002] type 00 class 0x00ff00 [ 0.406098] pci 0000:00:03.0: reg 0x10: [io 0xe020-0xe03f] [ 0.409601] pci 0000:00:03.0: reg 0x20: [mem 0xfd400000-0xfd403fff 64bit pref] [ 0.412666] pci 0000:00:07.0: [8086:2922] type 00 class 0x010601 [ 0.416984] pci 0000:00:07.0: reg 0x20: [io 0xe040-0xe05f] [ 0.419117] pci 0000:00:07.0: reg 0x24: [mem 0xfea35000-0xfea35fff] [ 0.420631] pci 0000:00:10.0: [8086:153a] type 00 class 0x020000 [ 0.423404] pci 0000:00:10.0: reg 0x10: [mem 0xfea00000-0xfea1ffff] [ 0.426092] pci 0000:00:10.0: reg 0x14: [mem 0xfea36000-0xfea36fff] [ 0.428439] pci 0000:00:10.0: reg 0x18: [io 0xe060-0xe07f] [ 0.435435] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.438298] pci 0000:00:11.0: [8086:1533] type 00 class 0x020000 [ 0.440699] pci 0000:00:11.0: reg 0x10: [mem 0xfe800000-0xfe8fffff] [ 0.444518] pci 0000:00:11.0: reg 0x18: [io 0xe080-0xe09f] [ 0.447223] pci 0000:00:11.0: reg 0x1c: [mem 0xfea30000-0xfea33fff] [ 0.450490] pci 0000:00:11.0: reg 0x30: [mem 0xfe900000-0xfe9fffff pref] [ 0.452172] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 0.454462] pci 0000:00:1e.0: [1b36:0001] type 01 class 0x060400 [ 0.456395] pci 0000:00:1e.0: reg 0x10: [mem 0xfea37000-0xfea370ff 64bit] [ 0.459593] pci 0000:00:1f.0: [1b36:0001] type 01 class 0x060400 [ 0.462176] pci 0000:00:1f.0: reg 0x10: [mem 0xfea38000-0xfea380ff 64bit] [ 0.465564] pci_bus 0000:01: extended config space not accessible [ 0.467430] acpiphp: Slot [0] registered [ 0.469013] acpiphp: Slot [1] registered [ 0.470333] acpiphp: Slot [2] registered [ 0.471404] acpiphp: Slot [3-1] registered [ 0.472735] acpiphp: Slot [4-1] registered [ 0.474085] acpiphp: Slot [5-1] registered [ 0.475401] acpiphp: Slot [6-1] registered [ 0.476736] acpiphp: Slot [7-1] registered [ 0.478173] acpiphp: Slot [8-1] registered [ 0.479403] acpiphp: Slot [9-1] registered [ 0.480729] acpiphp: Slot [10-1] registered [ 0.482085] acpiphp: Slot [11-1] registered [ 0.483400] acpiphp: Slot [12-1] registered [ 0.484749] acpiphp: Slot [13-1] registered [ 0.486103] acpiphp: Slot [14-1] registered [ 0.487401] acpiphp: Slot [15-1] registered [ 0.488739] acpiphp: Slot [16-1] registered [ 0.490083] acpiphp: Slot [17-1] registered [ 0.491404] acpiphp: Slot [18-1] registered [ 0.492743] acpiphp: Slot [19-1] registered [ 0.494100] acpiphp: Slot [20-1] registered [ 0.495420] acpiphp: Slot [21-1] registered [ 0.496835] acpiphp: Slot [22-1] registered [ 0.498231] acpiphp: Slot [23-1] registered [ 0.499404] acpiphp: Slot [24-1] registered [ 0.500753] acpiphp: Slot [25-1] registered [ 0.502091] acpiphp: Slot [26-1] registered [ 0.503404] acpiphp: Slot [27-1] registered [ 0.504753] acpiphp: Slot [28-1] registered [ 0.506089] acpiphp: Slot [29-1] registered [ 0.507401] acpiphp: Slot [30] registered [ 0.508720] acpiphp: Slot [31] registered [ 0.510323] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.511393] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.513150] pci 0000:00:1e.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.514875] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfd3fffff 64bit pref] [ 0.515920] pci_bus 0000:02: extended config space not accessible [ 0.517555] acpiphp: Slot [0-1] registered [ 0.518893] acpiphp: Slot [1-1] registered [ 0.519402] acpiphp: Slot [2-1] registered [ 0.521321] acpiphp: Slot [3-2] registered [ 0.522665] acpiphp: Slot [4-2] registered [ 0.523404] acpiphp: Slot [5-2] registered [ 0.524742] acpiphp: Slot [6-2] registered [ 0.526070] acpiphp: Slot [7-2] registered [ 0.527391] acpiphp: Slot [8-2] registered [ 0.528726] acpiphp: Slot [9-2] registered [ 0.530066] acpiphp: Slot [10-2] registered [ 0.531403] acpiphp: Slot [11-2] registered [ 0.532750] acpiphp: Slot [12-2] registered [ 0.534086] acpiphp: Slot [13-2] registered [ 0.535402] acpiphp: Slot [14-2] registered [ 0.536849] acpiphp: Slot [15-2] registered [ 0.538189] acpiphp: Slot [16-2] registered [ 0.539407] acpiphp: Slot [17-2] registered [ 0.540755] acpiphp: Slot [18-2] registered [ 0.542256] acpiphp: Slot [19-2] registered [ 0.543407] acpiphp: Slot [20-2] registered [ 0.544760] acpiphp: Slot [21-2] registered [ 0.546100] acpiphp: Slot [22-2] registered [ 0.547402] acpiphp: Slot [23-2] registered [ 0.548749] acpiphp: Slot [24-2] registered [ 0.550100] acpiphp: Slot [25-2] registered [ 0.551402] acpiphp: Slot [26-2] registered [ 0.552754] acpiphp: Slot [27-2] registered [ 0.554092] acpiphp: Slot [28-2] registered [ 0.555401] acpiphp: Slot [29-2] registered [ 0.556745] acpiphp: Slot [30-1] registered [ 0.558085] acpiphp: Slot [31-1] registered [ 0.559691] pci 0000:00:1f.0: PCI bridge to [bus 02] [ 0.561144] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff] [ 0.562747] pci 0000:00:1f.0: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.563412] pci 0000:00:1f.0: bridge window [mem 0xfd000000-0xfd1fffff 64bit pref] [ 0.566663] pci_bus 0000:00: on NUMA node 0 [ 0.567191] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 10 11) [ 0.571484] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 11) [ 0.573593] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) [ 0.575529] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) [ 0.579414] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.582855] SCSI subsystem initialized [ 0.583433] libata version 3.00 loaded. [ 0.583433] ACPI: bus type USB registered [ 0.583433] usbcore: registered new interface driver usbfs [ 0.583433] usbcore: registered new interface driver hub [ 0.587416] usbcore: registered new device driver usb [ 0.589512] PCI: Using ACPI for IRQ routing [ 0.591374] PCI: pci_cache_line_size set to 64 bytes [ 0.591576] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.591582] e820: reserve RAM buffer [mem 0xbffde000-0xbfffffff] [ 0.593498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.593498] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.599377] clocksource: Switched to clocksource kvm-clock [ 0.602430] pnp: PnP ACPI init [ 0.602562] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.602562] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.602562] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.602562] pnp 00:03: [dma 2] [ 0.602562] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.602618] pnp: PnP ACPI: found 4 devices [ 0.604672] thermal_sys: Registered thermal governor 'step_wise' [ 0.604673] thermal_sys: Registered thermal governor 'user_space' [ 0.610845] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.628744] pci 0000:00:1e.0: PCI bridge to [bus 01] [ 0.630280] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.632635] pci 0000:00:1e.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.634786] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfd3fffff 64bit pref] [ 0.638155] pci 0000:00:1f.0: PCI bridge to [bus 02] [ 0.639606] pci 0000:00:1f.0: bridge window [io 0xc000-0xcfff] [ 0.641896] pci 0000:00:1f.0: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.644064] pci 0000:00:1f.0: bridge window [mem 0xfd000000-0xfd1fffff 64bit pref] [ 0.647462] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.649756] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.651356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.653466] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window] [ 0.655170] pci_bus 0000:00: resource 8 [mem 0x140000000-0x1bfffffff window] [ 0.656914] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.658426] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff] [ 0.660041] pci_bus 0000:01: resource 2 [mem 0xfd200000-0xfd3fffff 64bit pref] [ 0.662399] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 0.663915] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe5fffff] [ 0.665551] pci_bus 0000:02: resource 2 [mem 0xfd000000-0xfd1fffff 64bit pref] [ 0.668007] NET: Registered protocol family 2 [ 0.669501] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.672061] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.674548] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.676970] TCP: Hash tables configured (established 32768 bind 32768) [ 0.679271] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.680985] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.682778] NET: Registered protocol family 1 [ 0.684154] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.685712] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.687288] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.714089] PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.740716] pci 0000:00:01.2: quirk_usb_early_handoff+0x0/0x5f5 took 50577 usecs [ 0.743147] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.745766] PCI: CLS 64 bytes, default 64 [ 0.747169] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.748862] software IO TLB: mapped [mem 0xbbfde000-0xbffde000] (64MB) [ 0.750599] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21138e1d4be, max_idle_ns: 440795314416 ns [ 0.754253] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.756921] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.759560] hv_vmbus: registering driver hv_pci [ 0.761420] hv_vmbus: registering driver hyperv_fb [ 0.763554] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.766807] ACPI: Power Button [PWRF] [ 0.794252] PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.797401] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.800027] Non-volatile memory driver v1.3 [ 0.801472] Linux agpgart interface v0.103 [ 0.803029] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 0: 0xfc000000 -> 0xfcffffff [ 0.805737] bochs-drm 0000:00:02.0: remove_conflicting_pci_framebuffers: bar 2: 0xfea34000 -> 0xfea34fff [ 0.808502] [drm] Found bochs VGA, ID 0xb0c0. [ 0.809830] [drm] Framebuffer size 16384 kB @ 0xfc000000, mmio @ 0xfea34000. [ 0.811750] [TTM] Zone kernel: Available graphics memory: 2016424 KiB [ 0.813409] [TTM] Initializing pool allocator [ 0.814738] [TTM] Initializing DMA pool allocator [ 0.817738] [drm] Found EDID data blob. [ 0.819071] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0 [ 0.822044] fbcon: bochs-drmdrmfb (fb0) is primary device [ 0.999466] Console: switching to colour frame buffer device 128x48 [ 1.004753] bochs-drm 0000:00:02.0: fb0: bochs-drmdrmfb frame buffer device [ 1.169684] loop: module loaded [ 1.171480] Guest personality initialized and is inactive [ 1.172127] VMCI host device registered (name=vmci, major=10, minor=63) [ 1.172876] Initialized host personality [ 1.173378] VMware PVSCSI driver - version 1.0.7.0-k [ 1.173963] hv_vmbus: registering driver hv_storvsc [ 1.187795] ahci 0000:00:07.0: version 3.0 [ 1.214137] ahci 0000:00:07.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.215070] ahci 0000:00:07.0: flags: 64bit ncq only [ 1.219503] scsi host0: ahci [ 1.220336] scsi host1: ahci [ 1.221176] scsi host2: ahci [ 1.222045] scsi host3: ahci [ 1.222841] scsi host4: ahci [ 1.223720] scsi host5: ahci [ 1.224447] ata1: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35100 irq 24 [ 1.225983] ata2: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35180 irq 24 [ 1.227526] ata3: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35200 irq 24 [ 1.229073] ata4: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35280 irq 24 [ 1.230597] ata5: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35300 irq 24 [ 1.232142] ata6: SATA max UDMA/133 abar m4096@0xfea35000 port 0xfea35380 irq 24 [ 1.233743] ata_piix 0000:00:01.1: version 2.13 [ 1.234841] scsi host6: ata_piix [ 1.236537] scsi host7: ata_piix [ 1.238097] ata7: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xe0a0 irq 14 [ 1.240326] ata8: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xe0a8 irq 15 [ 1.242683] VMware vmxnet3 virtual NIC driver - version 1.4.17.0-k-NAPI [ 1.244859] hv_vmbus: registering driver hv_netvsc [ 1.246005] Fusion MPT base driver 3.04.20 [ 1.247052] Copyright (c) 1999-2008 LSI Corporation [ 1.248214] Fusion MPT SPI Host driver 3.04.20 [ 1.249338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.250652] ehci-pci: EHCI PCI platform driver [ 1.253801] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.255095] ohci-pci: OHCI PCI platform driver [ 1.256396] ohci-platform: OHCI generic platform driver [ 1.257580] uhci_hcd: USB Universal Host Controller Interface driver [ 1.284170] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 1.285432] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 1.286994] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000e000 [ 1.288425] hub 1-0:1.0: USB hub found [ 1.289423] hub 1-0:1.0: 2 ports detected [ 1.290610] usbcore: registered new interface driver usb-storage [ 1.291903] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.294798] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.296088] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.297284] hv_vmbus: registering driver hyperv_keyboard [ 1.298541] rtc_cmos 00:00: RTC can wake from S4 [ 1.300069] rtc_cmos 00:00: registered as rtc0 [ 1.301122] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 1.302567] intel_pstate: CPU model not supported [ 1.303689] sdhci: Secure Digital Host Controller Interface driver [ 1.304960] sdhci: Copyright(c) Pierre Ossman [ 1.306068] hidraw: raw HID events driver (C) Jiri Kosina [ 1.307244] hv_vmbus: registering driver hid_hyperv [ 1.308363] usbcore: registered new interface driver usbhid [ 1.309542] usbhid: USB HID core driver [ 1.310507] hv_utils: Registering HyperV Utility Driver [ 1.311650] hv_vmbus: registering driver hv_utils [ 1.312736] hv_vmbus: registering driver hv_balloon [ 1.313984] NET: Registered protocol family 10 [ 1.315326] Segment Routing with IPv6 [ 1.315624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.316529] NET: Registered protocol family 17 [ 1.319288] 8021q: 802.1Q VLAN Support v1.8 [ 1.320461] NET: Registered protocol family 40 [ 1.408154] IPI shorthand broadcast: enabled [ 1.409347] AVX2 version of gcm_enc/dec engaged. [ 1.410456] AES CTR mode by8 optimization enabled [ 1.412576] sched_clock: Marking stable (1280264585, 131142649)->(1588815516, -177408282) [ 1.414377] rtc_cmos 00:00: setting system clock to 2020-08-23T16:22:45 UTC (1598199765) [ 1.546733] ata3: SATA link down (SStatus 0 SControl 300) [ 1.548252] ata6: SATA link down (SStatus 0 SControl 300) [ 1.550647] ata2: SATA link down (SStatus 0 SControl 300) [ 1.552053] ata5: SATA link down (SStatus 0 SControl 300) [ 1.553541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.555099] ata4: SATA link down (SStatus 0 SControl 300) [ 1.556448] ata1.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 1.557767] ata1.00: 729088 sectors, multi 16: LBA48 NCQ (depth 32) [ 1.559094] ata1.00: applying bridge limits [ 1.560369] ata1.00: configured for UDMA/100 [ 1.561623] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 1.563325] sd 0:0:0:0: [sda] 729088 512-byte logical blocks: (373 MB/356 MiB) [ 1.564783] sd 0:0:0:0: [sda] Write Protect is off [ 1.565917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.565929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.569830] Alternate GPT is invalid, using primary GPT. [ 1.571085] sda: sda1 sda2 sda128 [ 1.572415] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.575783] VFS: Mounted root (squashfs filesystem) readonly on device 8:2. [ 1.577932] Freeing unused kernel image memory: 1088K [ 1.623420] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 1.821465] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.823471] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0 [ 2.055461] Write protecting the kernel read-only data: 18432k [ 2.058563] Freeing unused kernel image memory: 2016K [ 2.060306] Freeing unused kernel image memory: 1200K [ 2.061805] Run /sbin/init as init process [ 2.322392] init: Console is alive [ 2.732255] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 2.746944] pps_core: LinuxPPS API ver. 1 registered [ 2.748237] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it [ 2.750356] PTP clock support registered [ 2.752532] ANTFS Module: Version 07.19-b41ba529 [ 2.754135] ehci-fsl: Freescale EHCI Host controller driver [ 2.755844] ehci-platform: EHCI generic platform driver [ 2.757908] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.759611] usbcore: registered new interface driver uas [ 2.761003] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 2.771562] init: - preinit - [ 2.901484] random: jshn: uninitialized urandom read (4 bytes read) [ 2.907309] random: jshn: uninitialized urandom read (4 bytes read) [ 2.910677] random: jshn: uninitialized urandom read (4 bytes read) [ 6.942190] urandom_read: 4 callbacks suppressed [ 6.942191] random: jshn: uninitialized urandom read (4 bytes read) [ 6.969651] mount_root: loading kmods from internal overlay [ 6.976789] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 6.979000] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 7.026964] block: attempting to load /etc/config/fstab [ 7.028324] block: unable to load configuration (fstab: Entry not found) [ 7.029855] block: no usable configuration [ 7.039222] random: procd: uninitialized urandom read (4 bytes read) [ 7.331639] F2FS-fs (loop0): Mounted with checkpoint version = 47c30efe [ 7.335604] mount_root: loading kmods from internal overlay [ 7.346404] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 7.349306] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/ [ 7.364864] block: attempting to load /etc/config/fstab [ 7.366231] block: unable to load configuration (fstab: Entry not found) [ 7.367779] block: no usable configuration [ 7.369199] mount_root: switching to f2fs overlay [ 7.375640] overlayfs: "xino" feature enabled using 32 upper inode bits. [ 7.422746] urandom-seed: Seeding with /etc/urandom.seed [ 7.434517] procd: - early - [ 7.790178] random: fast init done [ 8.021673] squashfs: Unknown parameter 'discard' [ 8.028297] F2FS-fs (sda128): Magic Mismatch, valid(0xf2f52010) - read(0xd44d89e4) [ 8.030418] F2FS-fs (sda128): Can't find valid F2FS filesystem in 1th superblock [ 8.032874] F2FS-fs (sda128): Magic Mismatch, valid(0xf2f52010) - read(0x66fdb73a) [ 8.034964] F2FS-fs (sda128): Can't find valid F2FS filesystem in 2th superblock [ 8.169652] procd: - ubus - [ 8.184642] random: ubusd: uninitialized urandom read (4 bytes read) [ 8.221973] procd: - init - [ 8.306342] urngd: v1.0.2 started. [ 8.311689] kmodloader: loading kernel modules from /etc/modules.d/ [ 8.315987] random: crng init done [ 8.323525] NET: Registered protocol family 38 [ 8.327822] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.330649] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 8.332167] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 8.334455] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 8.336246] igb: Copyright (c) 2007-2014 Intel Corporation. [ 8.362991] PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 8.409706] pps pps0: new PPS source ptp0 [ 8.410924] igb 0000:00:11.0: added PHC on eth0 [ 8.412173] igb 0000:00:11.0: Intel(R) Gigabit Ethernet Network Connection [ 8.413681] igb 0000:00:11.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:31:11:06:10:85 [ 8.415279] igb 0000:00:11.0: eth0: PBA No: 000200-000 [ 8.416584] igb 0000:00:11.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 8.418986] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 8.420914] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 8.423795] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 8.425414] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 8.427827] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 8.442164] cryptodev: driver 1.10 loaded. [ 8.443732] i2c /dev entries driver [ 8.445638] Mirror/redirect action on [ 8.448694] u32 classifier [ 8.449739] input device check on [ 8.451100] Actions configured [ 8.454517] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 8.458317] Loading modules backported from Linux version v5.8-0-gbcf876870b95 [ 8.459876] Backport generated by backports.git v5.8-1-0-g79400d9e [ 8.462542] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 8.463909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 8.491194] e1000e 0000:00:10.0: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode [ 8.493052] e1000e 0000:00:10.0: Interrupt Mode set to 1 [ 8.582471] e1000e 0000:00:10.0 0000:00:10.0 (uninitialized): registered PHC clock [ 8.653157] e1000e 0000:00:10.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:23:24:78:79:8e [ 8.655119] e1000e 0000:00:10.0 eth1: Intel(R) PRO/1000 Network Connection [ 8.657304] e1000e 0000:00:10.0 eth1: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 8.662316] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.8.20-k [ 8.664385] i40e: Copyright (c) 2013 - 2019 Intel Corporation. [ 8.700495] init oaf sysctl...ok [ 8.701820] register char dev....ok [ 8.715204] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 8.717798] usbcore: registered new interface driver r8152 [ 8.720536] usbcore: registered new interface driver rtl8150 [ 8.723011] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) [ 8.724867] usbcore: registered new interface driver ums-alauda [ 8.726541] usbcore: registered new interface driver ums-cypress [ 8.728224] usbcore: registered new interface driver ums-datafab [ 8.729881] usbcore: registered new interface driver ums-freecom [ 8.731559] usbcore: registered new interface driver ums-isd200 [ 8.733194] usbcore: registered new interface driver ums-jumpshot [ 8.734837] usbcore: registered new interface driver ums-karma [ 8.736471] usbcore: registered new interface driver ums-sddr09 [ 8.738282] usbcore: registered new interface driver ums-sddr55 [ 8.739927] usbcore: registered new interface driver ums-usbat [ 8.746936] xt_time: kernel timezone is -0000 [ 8.848104] [drm] amdgpu kernel modesetting enabled. [ 8.850404] usbcore: registered new interface driver asix [ 8.852171] usbcore: registered new interface driver ax88179_178a [ 8.864446] PPP generic driver version 2.4.2 [ 8.865803] PPP MPPE Compression module registered [ 8.867255] NET: Registered protocol family 24 [ 8.877996] usbcore: registered new interface driver rt2800usb [ 8.880631] usbcore: registered new interface driver ath9k_htc [ 8.882736] kmodloader: done loading kernel modules from /etc/modules.d/ [ 10.843442] e1000e 0000:00:10.0 eth1: MSI interrupt test failed, using legacy interrupt. [ 10.847525] br-lan: port 1(eth1) entered blocking state [ 10.849409] br-lan: port 1(eth1) entered disabled state [ 10.851566] device eth1 entered promiscuous mode [ 11.010740] 8021q: adding VLAN 0 to HW filter on device eth0 [ 11.045406] fast-classifier (PBR safe v2.1.4a): starting up [ 11.047418] fast-classifier: registered [ 11.970768] config size: 25,data = { "op": 3, "data": { } } [ 11.970768] [ 11.972887] #########show app status########## [ 11.974063] [ 11.974063] [ 11.974063] [ 11.991844] config size: 45,data = { "op": 4, "data": { "mac_list": [ ":" ] } } [ 11.991844] [ 11.993921] mac format error: : [ 11.994833] ## mac num = 0 [ 11.995678] #########show app status########## [ 11.996793] [ 11.996793] [ 11.996793] [ 13.690066] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.858957] br-lan: port 1(eth1) entered blocking state [ 13.860055] br-lan: port 1(eth1) entered forwarding state [ 14.022440] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 14.024406] igb 0000:00:11.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 19.312754] pppoe-wan: renamed from ppp0

coolsnowwolf / lede