search

coolsnowwolf / lede

Lean's LEDE source
Other
29.87k stars 19.54k forks source link

路由重启之后所有的设置丢失 #5826

Closed zonyck closed 3 years ago

zonyck commented 3 years ago

反馈bug/问题模板，提建议请删除

1.关于你要提交的问题

Q：是否搜索了issue (使用 "x" 选择)

2. 详细叙述

(1) 具体问题

A：路由重启之后所有的设置都恢复到原始状态了。包括上网账号也无法保存。

(2) 路由器型号和固件版本

Linksys WRT1900ACS

OpenWrt R20.7.1 / LuCI Master (git-20.256.12360-1a54222)

(3) 详细日志

Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] OF: fdt: Machine model: Linksys WRT1900ACS Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] On node 0 totalpages: 131072 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] Normal zone: 1152 pages used for memmap Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x7c/0x4f8 with crng_init=0 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] percpu: Embedded 11 pages/cpu s15436 r8192 d21428 u45056 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: s15436 r8192 d21428 u45056 alloc=11*4096 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] Bootloader command line (ignored): console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] Memory: 509392K/524288K available (6144K kernel code, 214K rwdata, 1516K rodata, 1024K init, 231K bss, 14896K reserved, 0K cma-reserved, 0K highmem) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] Virtual kernel memory layout: Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (7136 kB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 215 kB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 232 kB) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000006] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000015] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000027] Switching to timer-based delay loop, resolution 1ns Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000144] Ignoring duplicate/late registration of read_current_timer delay Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000151] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000289] pid_max: default: 32768 minimum: 301 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000352] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000357] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000659] CPU: Testing write buffer coherency: ok Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000670] CPU0: Spectre v2: using BPIALL workaround Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000782] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.000948] Setting up static identity map for 0x100000 - 0x100060 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001017] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001091] mvebu-pmsu: Initializing Power Management Service Unit Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001145] rcu: Hierarchical SRCU implementation. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001338] smp: Bringing up secondary CPUs ... Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001465] Booting CPU 1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001611] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001614] CPU1: Spectre v2: using BPIALL workaround Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001662] smp: Brought up 1 node, 2 CPUs Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001667] SMP: Total of 2 processors activated (3200.00 BogoMIPS). Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.001670] CPU: All CPU(s) started in SVC mode. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.003248] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.003304] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.003312] futex hash table entries: 512 (order: 3, 32768 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.003380] pinctrl core: initialized pinctrl subsystem Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.003644] NET: Registered protocol family 16 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.004190] DMA: preallocated 256 KiB pool for atomic coherent allocations Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.004883] cpuidle: using governor ladder Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 0.005048] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 0.005055] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.011011] cryptd: max_cpu_qlen set to 1000 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.011403] SCSI subsystem initialized Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.011563] libata version 3.00 loaded. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.011668] usbcore: registered new interface driver usbfs Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.011691] usbcore: registered new interface driver hub Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.011714] usbcore: registered new device driver usb Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.012643] clocksource: Switched to clocksource arm_global_timer Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013001] NET: Registered protocol family 2 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013218] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013233] TCP established hash table entries: 4096 (order: 2, 16384 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013254] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013286] TCP: Hash tables configured (established 4096 bind 4096) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013321] UDP hash table entries: 256 (order: 1, 8192 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013336] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.013415] NET: Registered protocol family 1 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.013428] PCI: CLS 0 bytes, default 64 Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 0.014507] Crashlog allocated RAM at address 0x3f00000 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.014581] workingset: timestamp_bits=14 max_order=17 bucket_order=3 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.016532] squashfs: version 4.0 (2009/01/31) Phillip Lougher Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.016537] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.019180] io scheduler noop registered Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.019188] io scheduler deadline registered (default) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.019764] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.020762] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.020773] pci_bus 0000:00: root bus resource [bus 00-ff] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.020778] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.020783] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff] Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.020849] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.020969] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.021800] PCI: bus0: Fast back to back transfers disabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.021807] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.021814] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.021865] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.021888] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.021898] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.021956] pci 0000:01:00.0: supports D1 D2 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.021960] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.022829] PCI: bus1: Fast back to back transfers disabled Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.022837] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.022890] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.022919] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.022931] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.023010] pci 0000:02:00.0: supports D1 D2 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.023013] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023032] pci 0000:02:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:02.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023880] PCI: bus2: Fast back to back transfers disabled Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 0.023887] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023911] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023917] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023924] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023934] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023943] pci 0000:00:01.0: PCI bridge to [bus 01] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023949] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023956] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023966] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023976] pci 0000:00:02.0: PCI bridge to [bus 02] Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.023981] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff] Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.024209] mv_xor f1060800.xor: Marvell shared XOR driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.083006] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 0.083122] mv_xor f1060900.xor: Marvell shared XOR driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.142993] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr ) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.143154] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.143426] console [ttyS0] disabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.163498] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.944606] console [ttyS0] enabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.949685] loop: module loaded Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.953142] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.962229] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.971403] scsi host0: ahci-mvebu Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.975032] scsi host1: ahci-mvebu Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.978509] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.986470] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 0.995008] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.001388] nand: AMD/Spansion S34ML01G2 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.005339] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.013140] Bad block table found at page 65472, version 0x01 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.019242] Bad block table found at page 65408, version 0x01 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.025285] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.032362] Creating 10 MTD partitions on "pxa3xx_nand-0": Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.037881] 0x000000000000-0x000000200000 : "u-boot" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.043138] 0x000000200000-0x000000240000 : "u_env" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.048227] 0x000000240000-0x000000280000 : "s_env" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.053354] 0x000000900000-0x000000a00000 : "devinfo" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.058620] 0x000000a00000-0x000003200000 : "kernel1" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.064124] 0x000001000000-0x000003200000 : "rootfs1" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.069571] 0x000003200000-0x000005a00000 : "kernel2" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.075068] 0x000003800000-0x000005a00000 : "ubi" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.080166] 0x000005a00000-0x000008000000 : "syscfg" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.085578] 0x000000280000-0x000000900000 : "unused_area" Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.091570] libphy: Fixed MDIO Bus: probed Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.095994] libphy: orion_mdio_bus: probed Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.100263] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.109093] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:d7:36:cb Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.118475] mvneta f1034000.ethernet eth1: Using random mac address 86:f9:eb:ef:64:66 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.126500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.133063] ehci-platform: EHCI generic platform driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.138374] ehci-orion: EHCI orion driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.142479] orion-ehci f1058000.usb: EHCI Host Controller Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.147919] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.155567] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.182620] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.188787] hub 1-0:1.0: USB hub found Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.192565] hub 1-0:1.0: 1 port detected Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.196945] usbcore: registered new interface driver usb-storage Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.203145] i2c /dev entries driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.209209] orion_wdt: Initial timeout 171 sec Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.213996] sdhci: Secure Digital Host Controller Interface driver Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.220200] sdhci: Copyright(c) Pierre Ossman Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.224675] sdhci-pltfm: SDHCI platform and OF driver helper Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.233997] marvell-cesa f1090000.crypto: CESA device successfully registered Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.241643] NET: Registered protocol family 10 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.246631] Segment Routing with IPv6 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.250341] NET: Registered protocol family 17 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.254962] 8021q: 802.1Q VLAN Support v1.8 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.259220] Registering SWP/SWPB emulation handler Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.265636] usb_phy_generic usb3_1-phy: Linked as a consumer to regulator.1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.272789] xhci-hcd f10f8000.usb3: xHCI Host Controller Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.278132] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.285711] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.294995] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.301069] hub 2-0:1.0: USB hub found Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.304870] hub 2-0:1.0: 1 port detected Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.308922] xhci-hcd f10f8000.usb3: xHCI Host Controller Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.314275] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.321796] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.328215] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.328825] ata2: SATA link down (SStatus 0 SControl 300) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.336522] hub 3-0:1.0: USB hub found Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.341839] ata1: SATA link down (SStatus 0 SControl 300) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.345604] hub 3-0:1.0: 1 port detected Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.355304] UBI: auto-attach mtd7 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.358635] ubi0: attaching mtd7 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.467965] ubi0: scanning is finished Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 1.475828] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 19, need 20 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.522825] ubi0: attached mtd7 (name "ubi", size 34 MiB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.528247] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.535161] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.541976] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.548971] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.555005] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.562256] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1598515870 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.571430] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 19 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.580980] ubi0: background thread "ubi_bgt0d" started, PID 715 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.581093] block ubiblock0_0: created from ubi0:0(rootfs) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 1.592527] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.599712] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mii:10 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.606539] mvsw61xx 10.mvsw61xx: Using direct addressing Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.620871] hctosys: unable to open rtc device (rtc0) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 1.626297] Waiting 1 sec before mounting root device... Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.052638] usb 3-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.083525] usb-storage 3-1:1.0: USB Mass Storage device detected Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.089735] scsi host2: usb-storage 3-1:1.0 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.644569] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.652311] Freeing unused kernel memory: 1024K Thu Aug 27 16:11:16 2020 kern.info kernel: [ 2.692719] Run /sbin/init as init process Thu Aug 27 16:11:16 2020 user.info kernel: [ 2.872539] init: Console is alive Thu Aug 27 16:11:16 2020 user.info kernel: [ 2.876048] init: - watchdog - Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 3.123002] scsi 2:0:0:0: Direct-Access Seagate BUP BL 0304 PQ: 0 ANSI: 6 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 3.132418] sd 2:0:0:0: [sda] Spinning up disk... Thu Aug 27 16:11:16 2020 user.info kernel: [ 3.145668] kmodloader: loading kernel modules from /etc/modules-boot.d/ Thu Aug 27 16:11:16 2020 user.info kernel: [ 3.181551] kmodloader: done loading kernel modules from /etc/modules-boot.d/ Thu Aug 27 16:11:16 2020 user.info kernel: [ 3.192850] init: - preinit - Thu Aug 27 16:11:16 2020 kern.info kernel: [ 3.499546] mvneta f1070000.ethernet tmp0: renamed from eth0 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 3.525511] random: procd: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 3.544545] mvneta f1034000.ethernet eth0: renamed from eth1 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 3.584365] mvneta f1070000.ethernet eth1: renamed from tmp0 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 4.052771] random: jshn: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 4.089750] random: jshn: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 4.162621] . Thu Aug 27 16:11:16 2020 kern.info kernel: [ 4.276458] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode Thu Aug 27 16:11:16 2020 kern.info kernel: [ 4.285825] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Thu Aug 27 16:11:16 2020 kern.info kernel: [ 4.291892] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Thu Aug 27 16:11:16 2020 kern.info kernel: [ 4.299896] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 5.202614] ... Thu Aug 27 16:11:16 2020 user.info kernel: [ 7.386109] mount_root: loading kmods from internal overlay Thu Aug 27 16:11:16 2020 user.info kernel: [ 7.399324] kmodloader: loading kernel modules from //etc/modules-boot.d/ Thu Aug 27 16:11:16 2020 user.info kernel: [ 7.407317] kmodloader: done loading kernel modules from //etc/modules-boot.d/ Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.527652] UBIFS error (ubi0:1 pid 840): ubifs_mount: too few LEBs (9), min. is 17 Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.535863] UBIFS error (ubi0:1 pid 837): ubifs_mount: too few LEBs (9), min. is 17 Thu Aug 27 16:11:16 2020 user.err kernel: [ 7.543676] mount_root: failed to mount -t ubifs /dev/ubi0_1 /tmp/overlay: Invalid argument Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.645196] UBIFS error (ubi0:1 pid 845): ubifs_mount: too few LEBs (9), min. is 17 Thu Aug 27 16:11:16 2020 user.err kernel: [ 7.653361] mount_root: unable to set filesystem state Thu Aug 27 16:11:16 2020 user.info kernel: [ 7.658540] mount_root: switching to ubifs overlay Thu Aug 27 16:11:16 2020 user.err kernel: [ 7.663385] mount_root: switching to ubifs failed - fallback to ramoverlay Thu Aug 27 16:11:16 2020 kern.info kernel: [ 7.689194] F2FS-fs (mtdblock8): Magic Mismatch, valid(0xf2f52010) - read(0x0) Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.696464] F2FS-fs (mtdblock8): Can't find valid F2FS filesystem in 1th superblock Thu Aug 27 16:11:16 2020 kern.info kernel: [ 7.705568] F2FS-fs (mtdblock8): Magic Mismatch, valid(0xf2f52010) - read(0xffffffff) Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.713441] F2FS-fs (mtdblock8): Can't find valid F2FS filesystem in 2th superblock Thu Aug 27 16:11:16 2020 kern.info kernel: [ 7.721135] F2FS-fs (mtdblock8): Magic Mismatch, valid(0xf2f52010) - read(0x0) Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.728425] F2FS-fs (mtdblock8): Can't find valid F2FS filesystem in 1th superblock Thu Aug 27 16:11:16 2020 kern.info kernel: [ 7.736118] F2FS-fs (mtdblock8): Magic Mismatch, valid(0xf2f52010) - read(0xffffffff) Thu Aug 27 16:11:16 2020 kern.err kernel: [ 7.743983] F2FS-fs (mtdblock8): Can't find valid F2FS filesystem in 2th superblock Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 7.791064] ubi1: attaching mtd8 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.016529] ubi1: scanning is finished Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.062876] ubi1: attached mtd8 (name "syscfg", size 38 MiB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.068560] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.075472] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.082288] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.089288] ubi1: good PEBs: 296, bad PEBs: 8, corrupted PEBs: 0 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.095323] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.102575] ubi1: max/mean erase counter: 106/70, WL threshold: 4096, image sequence number: 2048739632 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.112009] ubi1: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.121275] ubi1: background thread "ubi_bgt1d" started, PID 869 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.142643] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 873 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.214102] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg" Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.221531] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.231499] UBIFS (ubi1:0): FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.241980] UBIFS (ubi1:0): reserved for root: 1619295 bytes (1581 KiB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 8.248626] UBIFS (ubi1:0): media format: w4/r0 (latest is w5/r0), UUID F64DDC46-5523-4738-9F5F-BF303C598DFC, small LPT model Thu Aug 27 16:11:16 2020 user.warn kernel: [ 8.261164] urandom-seed: Seed file not found (/etc/urandom.seed) Thu Aug 27 16:11:16 2020 kern.info kernel: [ 8.313168] mvneta f1034000.ethernet eth0: Link is Down Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 8.322626] . Thu Aug 27 16:11:16 2020 user.info kernel: [ 8.374603] procd: - early - Thu Aug 27 16:11:16 2020 user.info kernel: [ 8.379102] procd: - watchdog - Thu Aug 27 16:11:16 2020 user.info kernel: [ 8.984385] procd: - watchdog - Thu Aug 27 16:11:16 2020 user.info kernel: [ 8.987624] procd: - ubus - Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 9.008128] urandom_read: 3 callbacks suppressed Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.008131] random: ubusd: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.060156] random: ubusd: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.066651] random: ubusd: uninitialized urandom read (4 bytes read) Thu Aug 27 16:11:16 2020 user.info kernel: [ 9.073261] procd: - init - Thu Aug 27 16:11:16 2020 user.info kernel: [ 9.246999] kmodloader: loading kernel modules from /etc/modules.d/ Thu Aug 27 16:11:16 2020 user.info kernel: [ 9.269374] urngd: v1.0.2 started. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.273268] NET: Registered protocol family 38 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.293894] cryptodev: driver 1.10 loaded. Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.298439] Loading modules backported from Linux version v4.19.98-0-gd183c8e2647a Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.298777] random: crng init done Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.306067] Backport generated by backports.git v4.19.98-1-0-g8204eb99 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.309480] random: 1 urandom warning(s) missed due to ratelimiting Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.351355] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181210>> Thu Aug 27 16:11:16 2020 kern.info kernel: [ 9.359429] pci 0000:00:01.0: enabling device (0140 -> 0142) Thu Aug 27 16:11:16 2020 kern.warn kernel: [ 9.362637] .ready Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 9.365227] ieee80211 phy0: priv->pcmd_buf = 2b1a293c priv->pphys_cmd_buf = 403250a2 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.367271] sd 2:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 9.372642] ieee80211 phy0: fw download start Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.382627] sd 2:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB) Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.390404] sd 2:0:0:0: [sda] 2048-byte physical blocks Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 9.491326] ieee80211 phy0: FwSize = 118776 downloaded Size = 118776 curr_iteration 65497 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.494320] sd 2:0:0:0: [sda] Write Protect is off Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 9.499132] sd 2:0:0:0: [sda] Mode Sense: 4f 00 00 00 Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.499332] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Thu Aug 27 16:11:16 2020 kern.notice kernel: [ 9.534648] sd 2:0:0:0: [sda] Attached SCSI disk Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 10.458621] ieee80211 phy0: fw download complete Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.458647] ieee80211 phy0: device node: pcie@1,0 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 10.463883] ieee80211 phy0: pcmd = 2b1a293c Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.481635] ieee80211 phy0: firmware version: 0x702091a Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.832614] ieee80211 phy0: firmware region code: 90 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.871476] ieee80211 phy0: 2G disabled, 5G enabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.876411] ieee80211 phy0: 4 TX antennas, 4 RX antennas Thu Aug 27 16:11:16 2020 kern.info kernel: [ 10.881948] pci 0000:00:02.0: enabling device (0140 -> 0142) Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 10.887741] ieee80211 phy1: priv->pcmd_buf = 047d6b0a priv->pphys_cmd_buf = de82c77f Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 10.892643] ieee80211 phy1: fw download start Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 11.010543] ieee80211 phy1: FwSize = 118776 downloaded Size = 118776 curr_iteration 65511 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 11.968621] ieee80211 phy1: fw download complete Thu Aug 27 16:11:16 2020 kern.info kernel: [ 11.968649] ieee80211 phy1: device node: pcie@2,0 Thu Aug 27 16:11:16 2020 kern.debug kernel: [ 11.973863] ieee80211 phy1: pcmd = 047d6b0a Thu Aug 27 16:11:16 2020 kern.info kernel: [ 11.991637] ieee80211 phy1: firmware version: 0x702091a Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.342613] ieee80211 phy1: firmware region code: 90 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.379423] ieee80211 phy1: 2G enabled, 5G disabled Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.384356] ieee80211 phy1: 4 TX antennas, 4 RX antennas Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.420116] xt_time: kernel timezone is -0000 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.440464] PPP generic driver version 2.4.2 Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.445642] PPP MPPE Compression module registered Thu Aug 27 16:11:16 2020 kern.info kernel: [ 12.451011] NET: Registered protocol family 24 Thu Aug 27 16:11:16 2020 user.info kernel: [ 12.460303] kmodloader: done loading kernel modules from /etc/modules.d/ Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: 8021ad Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: 8021q Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: macvlan Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: veth Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: bridge Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: Network device Thu Aug 27 16:11:19 2020 user.notice : Added device handler type: tunnel Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.720165] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.727697] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.733594] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.741462] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.752511] br-lan: port 1(eth0.1) entered blocking state Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.757970] br-lan: port 1(eth0.1) entered disabled state Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.763509] device eth0.1 entered promiscuous mode Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.768319] device eth0 entered promiscuous mode Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.776136] br-lan: port 1(eth0.1) entered blocking state Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.781566] br-lan: port 1(eth0.1) entered forwarding state Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.787242] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'lan' is enabled Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'lan' is setting up now Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'lan' is now up Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'loopback' is enabled Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'loopback' is setting up now Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'loopback' is now up Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.801062] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.809117] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.815045] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off Thu Aug 27 16:11:19 2020 kern.info kernel: [ 18.826582] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan' is enabled Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan6' is enabled Thu Aug 27 16:11:19 2020 daemon.notice netifd: bridge 'br-lan' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'lan' has link connectivity Thu Aug 27 16:11:19 2020 daemon.notice netifd: Network device 'eth0' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: VLAN 'eth0.1' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: Network device 'lo' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'loopback' has link connectivity Thu Aug 27 16:11:19 2020 daemon.notice netifd: Network device 'eth1' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: VLAN 'eth1.2' link is up Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan' has link connectivity Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan' is setting up now Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan6' has link connectivity Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan6' is setting up now Thu Aug 27 16:11:19 2020 daemon.notice netifd: Interface 'wan6' is now up Thu Aug 27 16:11:19 2020 daemon.notice netifd: wan (2511): udhcpc: started, v1.30.0 Thu Aug 27 16:11:19 2020 daemon.notice netifd: wan (2511): udhcpc: sending discover Thu Aug 27 16:11:19 2020 daemon.notice netifd: wan (2511): udhcpc: sending select for 192.168.1.2 Thu Aug 27 16:11:19 2020 daemon.notice netifd: wan (2511): udhcpc: lease of 192.168.1.2 obtained, lease time 604800 Thu Aug 27 16:11:19 2020 kern.notice kernel: [ 19.110397] jffs2: notice: (2427) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. Thu Aug 27 16:11:19 2020 daemon.err block: No "mount.ubi" utility available Thu Aug 27 16:11:19 2020 daemon.err block: mounting /dev/mtdblock7 (ubi) as /mnt/mtdblock7 failed (25) - Not a tty Thu Aug 27 16:11:19 2020 daemon.err block: No "mount.ubi" utility available Thu Aug 27 16:11:19 2020 daemon.err block: mounting /dev/mtdblock8 (ubi) as /mnt/mtdblock8 failed (2) - No such file or directory Thu Aug 27 16:11:19 2020 daemon.err block: /dev/ubiblock0_0 is already mounted on /rom Thu Aug 27 16:11:20 2020 daemon.notice netifd: Interface 'wan' is now up Thu Aug 27 16:11:20 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna 0xffffffff 0xffffffff Thu Aug 27 16:11:20 2020 daemon.notice netifd: radio1 (2467): command failed: Not supported (-95) Thu Aug 27 16:11:20 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna 0xffffffff 0xffffffff Thu Aug 27 16:11:20 2020 user.notice mac80211: Failed command: iw phy phy1 set distance 0 Thu Aug 27 16:11:20 2020 daemon.notice netifd: radio0 (2466): command failed: Not supported (-95) Thu Aug 27 16:11:20 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0 Thu Aug 27 16:11:20 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.527716] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 19.541054] ieee80211 phy1: change: 0xffffffff Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.600964] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.612996] br-lan: port 2(wlan1) entered blocking state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.618334] br-lan: port 2(wlan1) entered disabled state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.623827] device wlan1 entered promiscuous mode Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.628604] br-lan: port 2(wlan1) entered blocking state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.633952] br-lan: port 2(wlan1) entered forwarding state Thu Aug 27 16:11:20 2020 daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE Thu Aug 27 16:11:20 2020 daemon.err hostapd: Using interface wlan1 with hwaddr 60:38:e0:d7:36:cc and ssid "OpenWrt" Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 19.645094] ieee80211 phy1: change: 0x100 Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 19.655459] ieee80211 phy1: change: 0x42 Thu Aug 27 16:11:20 2020 cron.info crond[3045]: crond (busybox 1.30.0) started, log level 5 Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50autoreboot: Auto REBOOT has started. Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50cpufreq: /etc/rc.common: line 20: can't create /sys/devices/system/cpu/cpufreq/policy0/scaling_governor: nonexistent directory Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50cpufreq: /etc/rc.common: line 21: can't create /sys/devices/system/cpu/cpufreq/policy0/scaling_min_freq: nonexistent directory Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50cpufreq: /etc/rc.common: line 22: can't create /sys/devices/system/cpu/cpufreq/policy0/scaling_max_freq: nonexistent directory Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50cpufreq: /etc/rc.common: line 24: can't create /sys/devices/system/cpu/cpufreq/ondemand/up_threshold: nonexistent directory Thu Aug 27 16:11:20 2020 daemon.notice procd: /etc/rc.d/S50cpufreq: /etc/rc.common: line 25: can't create /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor: nonexistent directory Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.778836] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready Thu Aug 27 16:11:20 2020 kern.info kernel: [ 19.785477] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready Thu Aug 27 16:11:20 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf Thu Aug 27 16:11:20 2020 daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED Thu Aug 27 16:11:20 2020 daemon.notice hostapd: wlan1: AP-ENABLED Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 19.982966] ieee80211 phy0: change: 0xffffffff Thu Aug 27 16:11:20 2020 daemon.err uhttpd[3229]: bind(): Address in use Thu Aug 27 16:11:20 2020 daemon.err uhttpd[3229]: bind(): Address in use Thu Aug 27 16:11:20 2020 daemon.err uhttpd[3229]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:20 2020 authpriv.warn dropbear[3256]: Failed listening on '22': Error listening: Address not available Thu Aug 27 16:11:20 2020 authpriv.info dropbear[3256]: Not backgrounding Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.081740] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.090331] br-lan: port 3(wlan0) entered blocking state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.095743] br-lan: port 3(wlan0) entered disabled state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.101286] device wlan0 entered promiscuous mode Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.106088] br-lan: port 3(wlan0) entered blocking state Thu Aug 27 16:11:20 2020 kern.info kernel: [ 20.111426] br-lan: port 3(wlan0) entered forwarding state Thu Aug 27 16:11:20 2020 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE Thu Aug 27 16:11:20 2020 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 20.120536] ieee80211 phy0: change: 0x100 Thu Aug 27 16:11:20 2020 kern.debug kernel: [ 20.132948] ieee80211 phy0: change: 0x40 Thu Aug 27 16:11:20 2020 daemon.notice netifd: Network device 'wlan1' link is up Thu Aug 27 16:11:21 2020 daemon.notice procd: /etc/rc.d/S60dbus: Unknown group "netdev" in message bus configuration file Thu Aug 27 16:11:21 2020 kern.debug kernel: [ 20.342656] ieee80211 phy0: change: 0x40 Thu Aug 27 16:11:21 2020 kern.alert kernel: [ 20.512170] fast-classifier (PBR safe v2.1.4a): starting up Thu Aug 27 16:11:21 2020 kern.alert kernel: [ 20.517852] fast-classifier: registered Thu Aug 27 16:11:21 2020 kern.debug kernel: [ 20.522761] ieee80211 phy0: change: 0x40 Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Found user 'nobody' (UID 65534) and group 'nogroup' (GID 65534). Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Successfully dropped root privileges. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: avahi-daemon 0.8 starting up. Thu Aug 27 16:11:21 2020 daemon.warn avahi-daemon[3393]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: No service file found in /etc/avahi/services. Thu Aug 27 16:11:21 2020 kern.debug kernel: [ 20.589714] ieee80211 phy0: change: 0x100 Thu Aug 27 16:11:21 2020 daemon.err hostapd: Using interface wlan0 with hwaddr 60:38:e0:d7:36:cd and ssid "OpenWrt" Thu Aug 27 16:11:21 2020 kern.debug kernel: [ 20.599164] ieee80211 phy0: change: 0x100 Thu Aug 27 16:11:21 2020 kern.debug kernel: [ 20.607674] ieee80211 phy0: change: 0x42 Thu Aug 27 16:11:21 2020 daemon.notice procd: /etc/rc.d/S90kms: KMS Server has started. Thu Aug 27 16:11:21 2020 daemon.notice procd: /etc/rc.d/S90kms: uci: Entry not found Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface wlan1.IPv6 with address fe80::6238:e0ff:fed7:36cc. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface wlan1.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface eth1.2.IPv6 with address fe80::6038:e0ff:fed7:36cb. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface eth1.2.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface eth1.2.IPv4 with address 192.168.1.2. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface eth1.2.IPv4 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface br-lan.IPv6 with address fd0c:ff7:2b0e::1. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface br-lan.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface br-lan.IPv4 with address 192.168.1.1. Thu Aug 27 16:11:21 2020 kern.info kernel: [ 20.775645] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Thu Aug 27 16:11:21 2020 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: started, v1.30.0 Thu Aug 27 16:11:21 2020 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: sending discover Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface br-lan.IPv4 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::6238:e0ff:fed7:36cb. Thu Aug 27 16:11:21 2020 daemon.notice hostapd: wlan0: interface state HT_SCAN->ENABLED Thu Aug 27 16:11:21 2020 daemon.notice hostapd: wlan0: AP-ENABLED Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface eth0.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::6238:e0ff:fed7:36cd. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface wlan0.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80::6038:e0ff:fed7:36cb. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface eth1.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface lo.IPv6 with address ::1. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface lo.IPv6 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: New relevant interface lo.IPv4 for mDNS. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Network interface enumeration completed. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fe80::6238:e0ff:fed7:36cc on wlan1.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fe80::6038:e0ff:fed7:36cb on eth1.2.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for 192.168.1.2 on eth1.2.IPv4. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fd0c:ff7:2b0e::1 on br-lan.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for 192.168.1.1 on br-lan.IPv4. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fe80::6238:e0ff:fed7:36cb on eth0.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fe80::6238:e0ff:fed7:36cd on wlan0.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for fe80::6038:e0ff:fed7:36cb on eth1.. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for ::1 on lo.*. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering new address record for 127.0.0.1 on lo.IPv4. Thu Aug 27 16:11:21 2020 daemon.info avahi-daemon[3393]: Registering HINFO record with values 'ARMV7L'/'LINUX'. Thu Aug 27 16:11:21 2020 daemon.notice netifd: Network device 'wlan0' link is up Thu Aug 27 16:11:22 2020 daemon.info avahi-daemon[3393]: Server startup complete. Host name is OpenWrt.local. Local service cookie is 440267939. Thu Aug 27 16:11:24 2020 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: no lease, failing Thu Aug 27 16:11:24 2020 daemon.notice procd: /etc/rc.d/S90sfe: net.ipv4.tcp_congestion_control = cubic Thu Aug 27 16:11:24 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Thu Aug 27 16:11:24 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Thu Aug 27 16:11:24 2020 daemon.notice procd: /etc/rc.d/S90sfe: udhcpc: started, v1.30.0 Thu Aug 27 16:11:24 2020 daemon.notice procd: /etc/rc.d/S90sfe: udhcpc: sending discover Thu Aug 27 16:11:25 2020 daemon.err uhttpd[3634]: bind(): Address in use Thu Aug 27 16:11:25 2020 daemon.err uhttpd[3634]: bind(): Address in use Thu Aug 27 16:11:25 2020 daemon.err uhttpd[3634]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:27 2020 daemon.notice procd: /etc/rc.d/S90sfe: udhcpc: no lease, failing Thu Aug 27 16:11:27 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN Thu Aug 27 16:11:27 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 1 Thu Aug 27 16:11:27 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2 Thu Aug 27 16:11:27 2020 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2 SS Thu Aug 27 16:11:28 2020 cron.info crond[3854]: crond (busybox 1.30.0) started, log level 5 Thu Aug 27 16:11:28 2020 daemon.info aria2: Instance "main" disabled. Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: ttyd 1.6.0-eaf077020e (libwebsockets 2.4.1) Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: tty configuration: Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: start command: /usr/libexec/login.sh Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: close signal: SIGHUP (1) Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: terminal type: xterm-256color Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: Creating Vhost 'default' port 7681, 2 protocols, IPv6 off Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: Listening on port: 7681 Thu Aug 27 16:11:29 2020 daemon.notice ttyd[3981]: Using foreign event loop... Thu Aug 27 16:11:29 2020 daemon.info urandom_seed[3993]: Seed saved (/etc/urandom.seed) Thu Aug 27 16:11:29 2020 daemon.err nmbd[3898]: [2020/08/27 16:11:29.600188, 0] ../../lib/util/become_daemon.c:136(daemon_ready) Thu Aug 27 16:11:29 2020 daemon.err nmbd[3898]: daemon_ready: daemon 'nmbd' finished starting up and ready to serve connections Thu Aug 27 16:11:29 2020 daemon.info procd: - init complete - Thu Aug 27 16:11:29 2020 user.info wsdd2[4056]: starting. Thu Aug 27 16:11:29 2020 daemon.err smbd[3897]: [2020/08/27 16:11:29.899858, 0] ../../source3/passdb/pdb_smbpasswd.c:249(startsmbfilepwent) Thu Aug 27 16:11:29 2020 daemon.err smbd[3897]: startsmbfilepwent_internal: file /etc/samba/smbpasswd did not exist. File successfully created. Thu Aug 27 16:11:29 2020 daemon.err smbd[3897]: [2020/08/27 16:11:29.984936, 0] ../../lib/util/become_daemon.c:136(daemon_ready) Thu Aug 27 16:11:29 2020 daemon.err smbd[3897]: daemon_ready: daemon 'smbd' finished starting up and ready to serve connections Thu Aug 27 16:11:30 2020 daemon.err uhttpd[4073]: bind(): Address in use Thu Aug 27 16:11:30 2020 daemon.err uhttpd[4073]: bind(): Address in use Thu Aug 27 16:11:30 2020 daemon.err uhttpd[4073]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:31 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Thu Aug 27 16:11:31 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Thu Aug 27 16:11:34 2020 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Thu Aug 27 16:11:34 2020 daemon.info hostapd: wlan1: STA 80:7a:bf:6f:1f:f7 IEEE 802.11: authenticated Thu Aug 27 16:11:34 2020 daemon.info hostapd: wlan1: STA 80:7a:bf:6f:1f:f7 IEEE 802.11: associated (aid 1) Thu Aug 27 16:11:34 2020 daemon.notice hostapd: wlan1: AP-STA-CONNECTED 80:7a:bf:6f:1f:f7 Thu Aug 27 16:11:35 2020 daemon.err miniupnpd[4304]: could not open lease file: /var/upnp.leases Thu Aug 27 16:11:35 2020 daemon.notice miniupnpd[4304]: HTTP listening on port 5000 Thu Aug 27 16:11:35 2020 daemon.notice miniupnpd[4304]: Listening for NAT-PMP/PCP traffic on port 5351 Thu Aug 27 16:11:35 2020 daemon.err uhttpd[4347]: bind(): Address in use Thu Aug 27 16:11:35 2020 daemon.err uhttpd[4347]: bind(): Address in use Thu Aug 27 16:11:35 2020 daemon.err uhttpd[4347]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:40 2020 daemon.err uhttpd[4353]: bind(): Address in use Thu Aug 27 16:11:40 2020 daemon.err uhttpd[4353]: bind(): Address in use Thu Aug 27 16:11:40 2020 daemon.err uhttpd[4353]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:44 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Thu Aug 27 16:11:44 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Thu Aug 27 16:11:45 2020 daemon.err uhttpd[4469]: bind(): Address in use Thu Aug 27 16:11:45 2020 daemon.err uhttpd[4469]: bind(): Address in use Thu Aug 27 16:11:45 2020 daemon.err uhttpd[4469]: Error: No sockets bound, unable to continue Thu Aug 27 16:11:45 2020 daemon.info procd: Instance uhttpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash Thu Aug 27 16:11:47 2020 cron.info crond[4526]: crond (busybox 1.30.0) started, log level 5 Thu Aug 27 16:11:47 2020 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Thu Aug 27 16:11:47 2020 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: [2020/08/27 16:12:01.859011, 0] ../../source3/nmbd/nmbd_become_lmb.c:397(become_local_master_stage2) Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: Samba name server OPENWRT is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1 Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: Thu Aug 27 16:12:01 2020 daemon.err nmbd[3898]: Thu Aug 27 16:12:05 2020 user.notice firewall: Reloading firewall due to ifup of wan6 (eth1.2) Thu Aug 27 16:12:06 2020 user.notice ddns-scripts[4790]: myddns_ipv6: PID '4790' started at 2020-08-27 16:12 Thu Aug 27 16:12:07 2020 user.warn ddns-scripts[4790]: myddns_ipv6: Service section disabled! - TERMINATE Thu Aug 27 16:12:07 2020 user.warn ddns-scripts[4790]: myddns_ipv6: PID '4790' exit WITH ERROR '1' at 2020-08-27 16:12 Thu Aug 27 16:12:20 2020 user.notice firewall: Reloading firewall due to ifup of wan (eth1.2) Thu Aug 27 16:12:21 2020 user.notice ddns-scripts[6079]: myddns_ipv4: PID '6079' started at 2020-08-27 16:12 Thu Aug 27 16:12:22 2020 user.warn ddns-scripts[6079]: myddns_ipv4: Service section disabled! - TERMINATE Thu Aug 27 16:12:22 2020 user.warn ddns-scripts[6079]: myddns_ipv4: PID '6079' exit WITH ERROR '1' at 2020-08-27 16:12 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: has_emperor mode detected (fd: 10) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: [uWSGI] getting INI configuration from /etc/uwsgi/vassals/luci-webui.ini Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: Starting uWSGI 2.0.18 (32bit) on [Thu Aug 27 16:12:44 2020] Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: compiled with version: 7.5.0 on 27 August 2020 08:11:10 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: os: Linux-4.19.123 #0 SMP Thu Aug 27 08:11:10 2020 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: nodename: OpenWrt Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: machine: armv7l Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: clock source: unix Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: detected number of CPU cores: 2 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: current working directory: / Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: detected binary path: /usr/sbin/uwsgi Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: !!! no internal routing support, rebuild with pcre support !!! Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: chdir() to /usr/lib/lua/luci/ Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: your processes number limit is 3979 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: limiting address space of processes... Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: your process address space limit is 209715200 bytes (200 MB) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: your memory page size is 4096 bytes Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: detected max file descriptor number: 1024 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: lock engine: pthread robust mutexes Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: thunder lock: enabled Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uwsgi socket 0 inherited UNIX address /var/run//luci-webui.socket fd 0 Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: your server socket listen backlog is limited to 100 connections Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: your mercy for graceful operations on workers is 60 seconds Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: mapped 487200 bytes (475 KB) for 9 cores Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: Operational MODE: preforking+threaded Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: initialized CGI path: /www/ Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: no app loaded. going in full dynamic mode Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: uWSGI is running in multiple interpreter mode Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: spawned uWSGI master process (pid: 7133) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: cheap mode enabled: waiting for socket connection... Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: Thu Aug 27 16:12:44 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini has been spawned Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: spawned uWSGI worker 1 (pid: 7134, cores: 3) Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: Thu Aug 27 16:12:44 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini is ready to accept requests Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: announcing my loyalty to the Emperor... Thu Aug 27 16:12:44 2020 daemon.info uwsgi-emperor: Thu Aug 27 16:12:44 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini is now loyal Thu Aug 27 16:16:07 2020 daemon.info hostapd: wlan0: STA d4:bb:c8:26:12:ef IEEE 802.11: authenticated Thu Aug 27 16:16:07 2020 daemon.info hostapd: wlan0: STA d4:bb:c8:26:12:ef IEEE 802.11: associated (aid 1) Thu Aug 27 16:16:07 2020 daemon.notice hostapd: wlan0: AP-STA-CONNECTED d4:bb:c8:26:12:ef Thu Aug 27 16:16:22 2020 kern.debug kernel: [ 321.179159] ieee80211 phy0: Mac80211 start BA d4:bb:c8:26:12:ef Thu Aug 27 16:21:07 2020 daemon.notice netifd: wan (2511): udhcpc: received SIGTERM Thu Aug 27 16:21:07 2020 daemon.notice netifd: Interface 'wan' is now down Thu Aug 27 16:21:07 2020 daemon.notice netifd: Interface 'wan' has link connectivity loss Thu Aug 27 16:21:07 2020 daemon.notice netifd: Interface 'wan' has link connectivity Thu Aug 27 16:21:07 2020 daemon.notice netifd: Interface 'wan' is setting up now Thu Aug 27 16:21:07 2020 daemon.err miniupnpd[4304]: ioctl(s, SIOCGIFADDR, ...): Address not available Thu Aug 27 16:21:07 2020 daemon.err miniupnpd[4304]: Failed to get IP for interface eth1.2 Thu Aug 27 16:21:07 2020 daemon.warn miniupnpd[4304]: SendNATPMPPublicAddressChangeNotification: cannot get public IP address, stopping Thu Aug 27 16:21:07 2020 user.err wsdd2[4056]: error: wsdd-mcast-v4: wsd_send_soap_msg: send Thu Aug 27 16:21:07 2020 daemon.info avahi-daemon[3393]: Withdrawing address record for 192.168.1.2 on eth1.2. Thu Aug 27 16:21:07 2020 daemon.info avahi-daemon[3393]: Leaving mDNS multicast group on interface eth1.2.IPv4 with address 192.168.1.2. Thu Aug 27 16:21:07 2020 daemon.info avahi-daemon[3393]: Interface eth1.2.IPv4 no longer relevant for mDNS. Thu Aug 27 16:21:07 2020 daemon.err insmod: module is already loaded - slhc Thu Aug 27 16:21:07 2020 daemon.err insmod: module is already loaded - ppp_generic Thu Aug 27 16:21:07 2020 daemon.err insmod: module is already loaded - pppox Thu Aug 27 16:21:07 2020 daemon.err insmod: module is already loaded - pppoe Thu Aug 27 16:21:07 2020 daemon.notice netifd: wan (7368): uci: Entry not found Thu Aug 27 16:21:07 2020 daemon.notice netifd: wan (7368): sh: out of range Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: Plugin rp-pppoe.so loaded. Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.8 Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: pppd 2.4.8 started by root, uid 0 Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: PPP session is 21505 Thu Aug 27 16:21:07 2020 daemon.warn pppd[7403]: Connected to 2c:64:4b:6f:bb:c9 via interface eth1.2 Thu Aug 27 16:21:07 2020 kern.info kernel: [ 607.095680] pppoe-wan: renamed from ppp0 Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: Renamed interface ppp0 to pppoe-wan Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: Using interface pppoe-wan Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: Connect: pppoe-wan <--> eth1.2 Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: syncppp not active Thu Aug 27 16:21:07 2020 daemon.info pppd[7403]: Remote message: Authentication success,Welcome! Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: PAP authentication succeeded Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: peer from calling number 2C:64:4B:6F:BB:C9 authorized Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: local LL address fe80::c066:14aa:f2d0:1df2 Thu Aug 27 16:21:07 2020 daemon.notice pppd[7403]: remote LL address fe80::2e64:4bff:fe6f:bbc9 Thu Aug 27 16:21:07 2020 user.err wsdd2[4056]: error: wsdd-mcast-v4: wsd_send_soap_msg: send Thu Aug 27 16:21:08 2020 daemon.notice pppd[7403]: local IP address 119.130.241.183 Thu Aug 27 16:21:08 2020 user.err wsdd2[4056]: error: wsdd-mcast-v4: wsd_send_soap_msg: send Thu Aug 27 16:21:08 2020 daemon.notice pppd[7403]: remote IP address 119.130.240.1 Thu Aug 27 16:21:08 2020 daemon.notice pppd[7403]: primary DNS address 202.96.128.166 Thu Aug 27 16:21:08 2020 daemon.notice pppd[7403]: secondary DNS address 202.96.134.133 Thu Aug 27 16:21:08 2020 daemon.notice netifd: Network device 'pppoe-wan' link is up Thu Aug 27 16:21:08 2020 daemon.notice netifd: Interface 'wan' is now up Thu Aug 27 16:21:08 2020 daemon.notice netifd: Network alias 'pppoe-wan' link is up Thu Aug 27 16:21:08 2020 daemon.notice netifd: Interface 'wan_6' is enabled Thu Aug 27 16:21:08 2020 daemon.notice netifd: Interface 'wan_6' has link connectivity Thu Aug 27 16:21:08 2020 daemon.notice netifd: Interface 'wan_6' is setting up now Thu Aug 27 16:21:08 2020 daemon.notice netifd: Interface 'wan_6' is now up Thu Aug 27 16:21:18 2020 user.notice firewall: Reloading firewall due to ifup of wan (pppoe-wan) Thu Aug 27 16:21:18 2020 daemon.notice miniupnpd[4304]: shutting down MiniUPnPd Thu Aug 27 16:21:18 2020 daemon.err miniupnpd[7800]: could not open lease file: /var/upnp.leases Thu Aug 27 16:21:18 2020 daemon.notice miniupnpd[7800]: HTTP listening on port 5000 Thu Aug 27 16:21:18 2020 daemon.notice miniupnpd[7800]: Listening for NAT-PMP/PCP traffic on port 5351 Thu Aug 27 16:21:18 2020 user.notice firewall: Reloading firewall due to ifupdate of wan (pppoe-wan) Thu Aug 27 16:21:18 2020 user.notice ddns-scripts[7827]: myddns_ipv4: PID '7827' started at 2020-08-27 16:21 Thu Aug 27 16:21:19 2020 user.warn ddns-scripts[7827]: myddns_ipv4: Service section disabled! - TERMINATE Thu Aug 27 16:21:19 2020 user.warn ddns-scripts[7827]: myddns_ipv4: PID '7827' exit WITH ERROR '1' at 2020-08-27 16:21 Tue Nov 24 01:59:03 2020 daemon.info uwsgi-emperor: workers have been inactive for more than 360 seconds (1606154343-1598516491) Tue Nov 24 01:59:03 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:03 2020 - [emperor] bringing back instance /etc/uwsgi/vassals/luci-webui.ini to on-demand mode Tue Nov 24 01:59:03 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:03 2020 - received message 0 from emperor Tue Nov 24 01:59:03 2020 daemon.info uwsgi-emperor: SIGINT/SIGQUIT received...killing workers... Tue Nov 24 01:59:03 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:03 2020 - [emperor] curse the uwsgi instance /etc/uwsgi/vassals/luci-webui.ini (pid: 7133) Tue Nov 24 01:59:04 2020 daemon.info uwsgi-emperor: worker 1 buried after 1 seconds Tue Nov 24 01:59:04 2020 daemon.info uwsgi-emperor: goodbye to uWSGI. Tue Nov 24 01:59:05 2020 daemon.info uwsgi-emperor: [uwsgi-emperor] /etc/uwsgi/vassals/luci-webui.ini -> back to "on demand" mode, waiting for connections on socket "/var/run//luci-webui.socket" ... Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: has_emperor mode detected (fd: 10) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: [uWSGI] getting INI configuration from /etc/uwsgi/vassals/luci-webui.ini Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: Starting uWSGI 2.0.18 (32bit) on [Tue Nov 24 01:59:06 2020] Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: compiled with version: 7.5.0 on 27 August 2020 08:11:10 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: os: Linux-4.19.123 #0 SMP Thu Aug 27 08:11:10 2020 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: nodename: OpenWrt Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: machine: armv7l Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: clock source: unix Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: detected number of CPU cores: 2 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: current working directory: / Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: detected binary path: /usr/sbin/uwsgi Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: !!! no internal routing support, rebuild with pcre support !!! Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: chdir() to /usr/lib/lua/luci/ Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: your processes number limit is 3979 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: limiting address space of processes... Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: your process address space limit is 209715200 bytes (200 MB) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: your memory page size is 4096 bytes Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: detected max file descriptor number: 1024 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: lock engine: pthread robust mutexes Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: thunder lock: enabled Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uwsgi socket 0 inherited UNIX address /var/run//luci-webui.socket fd 0 Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: your server socket listen backlog is limited to 100 connections Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: your mercy for graceful operations on workers is 60 seconds Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: mapped 487200 bytes (475 KB) for 9 cores Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: Operational MODE: preforking+threaded Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: initialized CGI path: /www/ Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: no app loaded. going in full dynamic mode Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uWSGI running as root, you can use --uid/--gid/--chroot options Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: WARNING: you are running uWSGI as root !!! (use the --uid flag) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: uWSGI is running in multiple interpreter mode Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: spawned uWSGI master process (pid: 9064) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: cheap mode enabled: waiting for socket connection... Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:06 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini has been spawned Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: spawned uWSGI worker 1 (pid: 9065, cores: 3) Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:06 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini is ready to accept requests Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: announcing my loyalty to the Emperor... Tue Nov 24 01:59:06 2020 daemon.info uwsgi-emperor: Tue Nov 24 01:59:06 2020 - [emperor] vassal /etc/uwsgi/vassals/luci-webui.ini is now loyal Tue Nov 24 01:59:09 2020 daemon.info pppd[7403]: System time change detected. Tue Nov 24 01:59:31 2020 cron.err crond[4526]: time disparity of 127298 minutes detected

sxx1314 commented 3 years ago

df -h 看占用

zonyck commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下 确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

pangfeng161 commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下 确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

pangfeng161 commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下 确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下 确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

编译固件时加大空间不久ok了

JohnGodzilla commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

编译固件时加大空间不久ok了

我也遇到了同样的问题, 重启之后会恢复出厂设置.

查看过了空间占用看起来没有问题. image

sxx1314 commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

编译固件时加大空间不久ok了

我也遇到了同样的问题, 重启之后会恢复出厂设置.

查看过了空间占用看起来没有问题. image

XD,这叫没问题？你的 overlay都没挂载到硬盘上，东西都没地方写怎么给你保存设置！ tmp目录仅仅是ram掉电清空。

JohnGodzilla commented 3 years ago

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

df -h看占用

  • 原因：设置还原大概率overlay空间占满/异常
  • 修改：不要编译过多的东西/自行删除overlay中不需要的东西。如果硬件允许可以自行修改扩容overlayspace。

我看了一下确实是空间满了，后来编译的时候，选少一点插件，编译出来安装后可以保存设置了。但是overlay还是告急，得想办法增加overlay空间。 Snipaste_2020-11-24_22-52-04

编译固件时加大空间不久ok了

我也遇到了同样的问题, 重启之后会恢复出厂设置. 查看过了空间占用看起来没有问题. image

XD,这叫没问题？你的 overlay都没挂载到硬盘上，东西都没地方写怎么给你保存设置！ tmp目录仅仅是ram掉电清空。

学到了,学到了.

woalbb commented 3 years ago

我的wnr612v2现在只能用bb14.07的固件，3.3M大小的，安装完了剩余100多k，再加个upnp，中文都不能加，否则时间长了就完蛋了。更高版本的固件都大于3.3M，安装后也是无法保存任何设置，一重启就无效。