挺尴尬的，又出现了，newifi-d2使用5.10.108内核时lan口不工作，WiFi正常，wan口正常。按照#8925修复之后出现flow_offload_hw_path错误

uniessey commented 2 years ago

反馈bug/问题模板，提建议请删除

1.关于你要提交的问题

Q：是否搜索了issue (使用 "x" 选择)

[ ] 没有类似的issue 有，但是没起作用；
2. 详细叙述

(1) 具体问题

A：newifi-d2使用5.10.108内核时lan口不工作，WiFi正常，wan口正常。按照#8925修复之后出现flow_offload_hw_path错误。编译信息附后

(2) 路由器型号和固件版本

A：newifi-d2使用5.10.108内核

(3) 详细日志

A：内核日志： [ 0.000000] Linux version 5.10.108 (uniessey@uniessey-machine) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 8.4.0 r4369-5a916c954) 8.4.0, GNU ld (GNU Binutils) 2.34) #0 SMP Fri Mar 25 15:00:09 2022 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Newifi-D2 [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff] [ 0.000000] On node 0 totalpages: 131072 [ 0.000000] Normal zone: 576 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 [ 0.000000] percpu: Embedded 15 pages/cpu s30608 r8192 d22640 u61440 [ 0.000000] pcpu-alloc: s30608 r8192 d22640 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130496 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00039a10 [ 0.000000] Readback ErrCtl register=00039a10 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 508392K/524288K available (6705K kernel code, 623K rwdata, 1396K rodata, 1244K init, 235K bss, 15896K reserved, 0K cma-reserved, 262144K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x3d0/0x5e4 with crng_init=0 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000013] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns [ 0.007950] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.016937] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.083101] pid_max: default: 32768 minimum: 301 [ 0.087873] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.095077] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.105687] rcu: Hierarchical SRCU implementation. [ 0.110703] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.118760] smp: Bringing up secondary CPUs ... [ 0.123986] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.123996] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.124010] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.124096] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.178627] Synchronize counters for CPU 1: done. [ 0.210966] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.210976] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.210987] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.211043] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.269939] Synchronize counters for CPU 2: done. [ 0.300483] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.300492] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.300501] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.300560] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.355142] Synchronize counters for CPU 3: done. [ 0.385026] smp: Brought up 1 node, 4 CPUs [ 0.393403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.403243] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.410299] pinctrl core: initialized pinctrl subsystem [ 0.417503] NET: Registered protocol family 16 [ 0.424035] cpuidle: using governor teo [ 0.448381] FPU Affinity set after 11720 emulations [ 0.456440] random: fast init done [ 0.478588] clocksource: Switched to clocksource GIC [ 0.485705] NET: Registered protocol family 2 [ 0.490309] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.498652] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.506977] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.514614] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.521696] TCP: Hash tables configured (established 2048 bind 2048) [ 0.528126] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.534615] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.541786] NET: Registered protocol family 1 [ 0.546083] PCI: CLS 0 bytes, default 32 [ 0.552011] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.563597] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.569655] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.580695] bounce: pool size: 64 pages [ 0.586613] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.592594] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.598445] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.605193] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.613384] printk: console [ttyS0] disabled [ 0.617705] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.626734] printk: console [ttyS0] enabled [ 0.634990] printk: bootconsole [early0] disabled [ 0.647554] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 0.654278] spi-nor spi0.0: w25q256 (32768 Kbytes) [ 0.659250] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.665575] Creating 4 MTD partitions on "spi0.0": [ 0.670520] 0x000000000000-0x000000030000 : "u-boot" [ 0.676466] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.682731] 0x000000040000-0x000000050000 : "factory" [ 0.688750] 0x000000050000-0x000002000000 : "firmware" [ 0.695172] 2 uimage-fw partitions found on MTD device firmware [ 0.701171] Creating 2 MTD partitions on "firmware": [ 0.706125] 0x000000000000-0x00000029edd2 : "kernel" [ 0.711080] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only [ 0.720190] 0x00000029edd2-0x000001fb0000 : "rootfs" [ 0.725162] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 0.735173] mtd: device 5 (rootfs) set to be root filesystem [ 0.741015] 1 squashfs-split partitions found on MTD device rootfs [ 0.747183] 0x000001020000-0x000001fb0000 : "rootfs_data" [ 0.764053] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 0.770826] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 0.779022] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 0.787264] mt7621-pci 1e140000.pcie: Parsing DT failed [ 0.794672] NET: Registered protocol family 10 [ 0.800794] Segment Routing with IPv6 [ 0.804554] NET: Registered protocol family 17 [ 0.809454] 8021q: 802.1Q VLAN Support v1.8 [ 0.817406] gpio-export gpio_export: 1 gpio(s) exported [ 0.823086] rt2880-pinmux pinctrl: pcie is already enabled [ 0.828726] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 0.835452] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 0.843622] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 0.851897] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 0.859693] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 0.967540] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 0.973143] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 1.078812] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 1.085750] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 1.090618] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.095483] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 1.104944] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 1.111315] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 1.118168] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.125042] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.130525] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff]) [ 1.140730] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 1.146731] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.152990] pci 0000:00:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 1.160023] pci 0000:00:00.0: reg 0x14: [mem size 0x00010000] [ 1.165818] pci 0000:00:00.0: supports D1 [ 1.169825] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.176041] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 1.182127] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.188390] pci 0000:00:01.0: reg 0x14: initial BAR value 0x00000000 invalid [ 1.195428] pci 0000:00:01.0: reg 0x14: [mem size 0x00010000] [ 1.201229] pci 0000:00:01.0: supports D1 [ 1.205222] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 1.212473] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.220493] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.228796] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 [ 1.234830] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.241887] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000 64bit] [ 1.248166] pci 0000:01:00.0: reg 0x30: initial BAR value 0x00000000 invalid [ 1.255199] pci 0000:01:00.0: reg 0x30: [mem size 0x00010000 pref] [ 1.261474] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.269119] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.274353] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.280438] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.287199] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff pref] [ 1.294422] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.301324] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 [ 1.307348] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.314395] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000] [ 1.320272] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.327861] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 1.333115] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 1.339199] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff] [ 1.345960] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff pref] [ 1.353170] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.359845] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 1.366432] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.373382] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 1.379980] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.386915] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.393692] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 1.400914] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 1.407675] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 1.414884] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 1.421675] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 1.428437] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 1.435212] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 1.441995] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] [ 1.449301] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] [ 1.456494] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.461452] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 1.468212] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.474985] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.482207] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff] [ 1.488985] pci 0000:00:01.0: PCI bridge to [bus 02] [ 1.493929] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 1.500702] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 1.507461] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 1.524649] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.536437] Freeing unused kernel memory: 1244K [ 1.541023] This architecture does not have kernel memory protection. [ 1.547456] Run /sbin/init as init process [ 1.551565] with arguments: [ 1.551573] /sbin/init [ 1.551577] with environment: [ 1.551583] HOME=/ [ 1.551588] TERM=linux [ 2.433768] init: Console is alive [ 2.437538] init: - watchdog - [ 4.543214] kmodloader: loading kernel modules from /etc/modules-boot.d/ [ 4.932490] usbcore: registered new interface driver usbfs [ 4.938198] usbcore: registered new interface driver hub [ 4.943709] usbcore: registered new device driver usb [ 4.991381] SCSI subsystem initialized [ 5.007745] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator [ 5.015496] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator [ 5.023393] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 5.028762] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 [ 5.048834] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 [ 5.058023] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000 [ 5.065263] hub 1-0:1.0: USB hub found [ 5.069285] hub 1-0:1.0: 2 ports detected [ 5.074052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 5.079518] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 [ 5.086999] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed [ 5.093600] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.102857] hub 2-0:1.0: USB hub found [ 5.106763] hub 2-0:1.0: 1 port detected [ 5.123952] usbcore: registered new interface driver usb-storage [ 5.130702] kmodloader: done loading kernel modules from /etc/modules-boot.d/ [ 5.139090] init: - preinit - [ 5.205816] random: crng init done [ 5.608834] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-mtk [ 5.641613] usb-storage 2-1:1.0: USB Mass Storage device detected [ 5.649595] scsi host0: usb-storage 2-1:1.0 [ 8.220324] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC44 PQ: 0 ANSI: 6 [ 8.231854] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 8.240165] sd 0:0:0:0: [sda] Write Protect is off [ 8.244988] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 8.245495] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 13.650198] mount_root: loading kmods from internal overlay [ 13.689133] kmodloader: loading kernel modules from //etc/modules-boot.d/ [ 13.699250] kmodloader: done loading kernel modules from //etc/modules-boot.d/ [ 13.968232] sda: sda1 sda2 [ 13.974715] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.654522] block: attempting to load /etc/config/fstab [ 14.666738] block: unable to load configuration (fstab: Entry not found) [ 14.673721] block: no usable configuration [ 14.679028] mount_root: jffs2 not ready yet, using temporary tmpfs overlay [ 14.701410] urandom-seed: Seed file not found (/etc/urandom.seed) [ 15.117724] register mt7603_drv [ 15.121043] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=25 [ 15.126446] pci 0000:00:01.0: enabling device (0004 -> 0007) [ 15.132118] mt7603_drv 0000:02:00.0: enabling device (0000 -> 0002) [ 15.144707] [ 15.144707] [ 15.144707] === pAd = 158d9365, size = 1648296 === [ 15.144707] [ 15.154441] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x [ 15.161112] <-- RTMPAllocAdapterBlock, Status=0 [ 15.165630] pAd->CSRBaseAddress =0xc0a00000, csr_addr=0xc0a00000! [ 15.171718] device_id =0x7603 [ 15.174680] MT7603 AP Driver version 4.1.2.0 [ 15.178950] mt7603_init()--> [ 15.181826] mt_bcn_buf_init(224): Not support for HIF_MT yet! [ 15.187541] <--mt7603_init() [ 15.190422] load_dev_l1profile()--> [ 15.555716] match_index_by_chipname() MT7603 found as INDEX0 [ 15.561514] l1set_profile_path() profile update from /etc/Wireless/RT2860/RT2860AP.dat to /etc/wireless/mt7615/mt7615.1.dat [ 15.572648] l1set_eeprom_offset() eeprom offset remain 0x0 [ 15.578122] l1set_eeprom_size() eeprom size update from 0x200 to 0x400 [ 15.584654] l1set_ifname() ifname rename from ra0 to ra [ 15.589874] l1set_ifname() ifname remain ra [ 15.594054] l1set_ifname() ifname remain ra [ 15.598230] l1set_ifname() ifname remain apcli [ 15.685715] register rtpci [ 15.688683] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24 [ 15.694091] pci 0000:00:00.0: enabling device (0004 -> 0007) [ 15.699752] rtpci 0000:01:00.0: enabling device (0000 -> 0002) [ 15.710878] [ 15.710878] [ 15.710878] === pAd = 7640d3c3, size = 1403632 === [ 15.710878] [ 15.720595] <-- RTMPAllocTxRxRingMemory, Status=0 [ 15.726092] <-- RTMPAllocAdapterBlock, Status=0 [ 15.730631] pAd->CSRBaseAddress =0xc0e00000, csr_addr=0xc0e00000! [ 15.736700] device_id =0x7662 [ 15.739674] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a [ 15.749310] MT76x2 AP Driver version: 3.0.5.0 [ 15.753681] ====> mt76x2_ePA_per_rate_compensate_init: 5944 is_ePA: 1 [ 15.760106] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5 [ 15.765478] RtmpEepromGetDefault::e2p_default=2 [ 15.770004] NVM is FLASH mode [ 15.772962] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai [ 15.780717] WiFi PCI Startup Time: 0.090s [ 15.802333] procd: - early - [ 15.805472] procd: - watchdog - [ 16.398837] procd: - watchdog - [ 16.406516] procd: - ubus - [ 16.679997] procd: - init - [ 17.480240] kmodloader: loading kernel modules from /etc/modules.d/ [ 17.509418] NET: Registered protocol family 38 [ 17.543352] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 17.630295] cryptodev: driver 1.12 loaded. [ 17.650466] mtk-eip93 1e004000.crypto: PRNG initialized [ 17.662266] mtk-eip93 1e004000.crypto: EIP93 initialized succesfull [ 17.766618] ntfs3: Index binary search [ 17.770413] ntfs3: Hot fix free clusters [ 17.774315] ntfs3: Max link count 1024 [ 17.778042] ntfs3: Activated 32 bits per cluster [ 17.791656] usbcore: registered new interface driver ums-alauda [ 17.799764] usbcore: registered new interface driver ums-cypress [ 17.807977] usbcore: registered new interface driver ums-datafab [ 17.816161] usbcore: registered new interface driver ums-freecom [ 17.824406] usbcore: registered new interface driver ums-isd200 [ 17.832685] usbcore: registered new interface driver ums-jumpshot [ 17.840914] usbcore: registered new interface driver ums-karma [ 17.849461] usbcore: registered new interface driver ums-sddr09 [ 17.857642] usbcore: registered new interface driver ums-sddr55 [ 17.866576] usbcore: registered new interface driver ums-usbat [ 17.918116] xt_time: kernel timezone is -0000 [ 17.927533] PPP generic driver version 2.4.2 [ 17.934039] PPP MPPE Compression module registered [ 17.940573] NET: Registered protocol family 24 [ 17.949746] kmodloader: done loading kernel modules from /etc/modules.d/ [ 51.459629] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 62.428227] load_dev_l1profile()--> [ 62.432005] l1set_profile_path() profile remain /etc/wireless/mt7615/mt7615.1.dat [ 62.440011] l1set_eeprom_offset() eeprom offset remain 0x0 [ 62.445521] l1set_eeprom_size() eeprom size remain 0x400 [ 62.451050] l1set_ifname() ifname rename from ra0 to ra [ 62.456275] l1set_ifname() ifname remain ra [ 62.460698] l1set_ifname() ifname remain ra [ 62.464909] l1set_ifname() ifname remain apcli [ 62.470185] TX_BCN DESC e7a958d7 size = 320 [ 62.474665] RX[0] DESC 7b992197 size = 2048 [ 62.479759] RX[1] DESC 5222cbc9 size = 2048 [ 62.490132] E2pAccessMode=2 [ 62.493894] cfg_mode=9 [ 62.496260] cfg_mode=9 [ 62.498896] wmode_band_equal(): Band Equal! [ 62.506891] APSDCapable[0]=1 [ 62.509851] APSDCapable[1]=1 [ 62.512733] APSDCapable[2]=1 [ 62.515615] APSDCapable[3]=1 [ 62.518526] APSDCapable[4]=1 [ 62.521420] APSDCapable[5]=1 [ 62.524303] APSDCapable[6]=1 [ 62.527181] APSDCapable[7]=1 [ 62.530101] APSDCapable[8]=1 [ 62.533161] APSDCapable[9]=1 [ 62.536039] APSDCapable[10]=1 [ 62.539052] APSDCapable[11]=1 [ 62.542209] APSDCapable[12]=1 [ 62.545173] APSDCapable[13]=1 [ 62.548134] APSDCapable[14]=1 [ 62.551145] APSDCapable[15]=1 [ 62.554302] default ApCliAPSDCapable[0]=1 [ 62.558309] default ApCliAPSDCapable[1]=1 [ 62.696325] Key1Str is Invalid key length(0) or Type(0) [ 62.701911] Key2Str is Invalid key length(0) or Type(0) [ 62.707446] Key3Str is Invalid key length(0) or Type(0) [ 62.713387] Key4Str is Invalid key length(0) or Type(0) [ 62.756203] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1 [ 62.761981] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 [ 62.767733] [PMF]Set_PMFSHA256Proc:: apidx=0, Desired PMFSHA256=0 [ 62.775218] FW Version: [ 62.775232] C [ 62.777683] L [ 62.779306] 1 [ 62.780892] 7 [ 62.782471] 3 [ 62.784050] 7 [ 62.785632] 6 [ 62.787211] 6 [ 62.788830] [ 62.790605] R [ 62.792188] [ 62.795249] FW Build Date: [ 62.795255] 2 [ 62.797957] 0 [ 62.799798] 1 [ 62.801383] 7 [ 62.802962] 1 [ 62.804540] 1 [ 62.806119] 1 [ 62.807695] 0 [ 62.809326] 1 [ 62.811126] 0 [ 62.812710] 5 [ 62.814290] 9 [ 62.815867] 3 [ 62.817444] 2 [ 62.819071] [ 62.820659] [ 62.823892] CmdAddressLenReq:(ret = 0) [ 62.828433] CmdFwStartReq: override = 1, address = 1048576 [ 62.834544] CmdStartDLRsp: WiFI FW Download Success [ 62.853698] AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC) [ 62.859582] efuse_probe: efuse = 10000002 [ 62.863585] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 [ 62.869242] RtmpEepromGetDefault::e2p_dafault=1 [ 62.873953] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 [ 62.881763] NVM is FLASH mode, flash_offset = 0x0 [ 62.886509] 1. Phy Mode = 14 [ 62.890063] @@@ NICReadEEPROMParameters : pAd->FWLoad=0 [ 63.050761] Country Region from e2p = ffff [ 63.054893] tssi_1_target_pwr_g_band = 46 [ 63.059232] 2. Phy Mode = 14 [ 63.062247] 3. Phy Mode = 14 [ 63.065138] NICInitPwrPinCfg(14): Not support for HIF_MT yet! [ 63.070938] NICInitializeAsic(588): Not support rtmp_mac_sys_reset () for HIF_MT yet! [ 63.078791] mt_mac_init()--> [ 63.081678] mt7603_init_mac_cr()--> [ 63.085470] AsicSetMacMaxLen(1907): Set the Max RxPktLen=1024! [ 63.091564] <--mt_mac_init() [ 63.094601] WTBL Segment 1 info: [ 63.097911] MemBaseAddr/FID:0x28000/0 [ 63.102014] EntrySize/Cnt:32/128 [ 63.105419] WTBL Segment 2 info: [ 63.109002] MemBaseAddr/FID:0x40000/0 [ 63.112837] EntrySize/Cnt:64/128 [ 63.116231] WTBL Segment 3 info: [ 63.119585] MemBaseAddr/FID:0x42000/64 [ 63.123723] EntrySize/Cnt:64/128 [ 63.127119] WTBL Segment 4 info: [ 63.130472] MemBaseAddr/FID:0x44000/128 [ 63.134691] EntrySize/Cnt:32/128 [ 63.138191] AntCfgInit(2689): Not support for HIF_MT yet! [ 63.143925] MCS Set = ff ff 00 00 01 [ 65.040204] SYNC - BBP R4 to 20MHz.l [ 67.542561] SYNC - BBP R4 to 20MHz.l [ 68.180581] EXT4-fs (sda2): recovery complete [ 68.185057] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: [ 70.040251] SYNC - BBP R4 to 20MHz.l [ 70.639571] SYNC - BBP R4 to 20MHz.l [ 71.239544] SYNC - BBP R4 to 20MHz.l [ 71.839681] SYNC - BBP R4 to 20MHz.l [ 72.439558] SYNC - BBP R4 to 20MHz.l [ 73.039582] SYNC - BBP R4 to 20MHz.l [ 73.639540] SYNC - BBP R4 to 20MHz.l [ 74.239558] SYNC - BBP R4 to 20MHz.l [ 74.839542] SYNC - BBP R4 to 20MHz.l [ 75.438614] [PMF]ap_pmf_init:: Security is not WPA2/WPA2PSK AES [ 75.444544] [PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0 [ 75.450897] AsicSetRalinkBurstMode(4325): Not support for HIF_MT yet! [ 75.457321] RTMPSetPiggyBack(943): Not support for HIF_MT yet! [ 75.469855] AsicSetTxPreamble(4312): Not support for HIF_MT yet! [ 75.475948] The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4 [ 75.484022] AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0 [ 75.489981] Main bssid = 20:76:93:55:e0:f6 [ 75.494158] <==== rt28xx_init, Status=0 [ 75.501843] @@@ ed_monitor_exit : ===> [ 75.505678] @@@ ed_monitor_exit : <=== [ 75.509971] mt7603_set_ed_cca: TURN OFF EDCCA mac 0x10618 = 0x8564267c, EDCCA_Status=0 [ 75.517958] WiFi Startup Cost (ra0): 13.090s [ 75.523694] br-lan: port 1(ra0) entered blocking state [ 75.528915] br-lan: port 1(ra0) entered disabled state [ 75.534500] device ra0 entered promiscuous mode [ 75.542726] br-lan: port 1(ra0) entered blocking state [ 75.547896] br-lan: port 1(ra0) entered forwarding state [ 75.554011] IPv6: ADDRCONF(NETDEVCHANGE): br-lan: link becomes ready [ 75.576088] build time = [ 75.576110] 2 [ 75.579188] 0 [ 75.580922] 1 [ 75.582497] 4 [ 75.584078] 1 [ 75.585653] 1 [ 75.587225] 1 [ 75.589229] 5 [ 75.591045] 0 [ 75.592617] 6 [ 75.594187] 0 [ 75.595754] 6 [ 75.597331] 0 [ 75.599024] 6 [ 75.600984] a [ 75.602559] [ 75.605610] [ 75.607099] rom patch for E3 IC [ 75.610671] [ 75.612362] platform = [ 75.612375] A [ 75.614823] L [ 75.616580] P [ 75.618177] S [ 75.620266] [ 75.623758] hw/sw version = [ 75.623769] 8a [ 75.626800] 10 [ 75.628464] 8a [ 75.630202] 10 [ 75.631870] [ 75.635004] patch version = [ 75.635009] 0 [ 75.637983] 0 [ 75.639645] 0 [ 75.641230] 10 [ 75.642798] [ 75.658033] FW Version:0.0.00 [ 75.658051] Build:1 [ 75.663411] Build Time: [ 75.663419] 2 [ 75.665859] 0 [ 75.667437] 1 [ 75.669066] 6 [ 75.670655] 0 [ 75.672229] 7 [ 75.673803] 1 [ 75.675551] 1 [ 75.677144] 1 [ 75.678932] 4 [ 75.680538] 4 [ 75.682111] 3 [ 75.683787] [ 75.685372] [ 75.686946] [ 75.688587] _ [ 75.690173] [ 75.693219] fw for E3 IC [ 75.712125] RX[0] DESC cf5ac770 size = 4096 [ 75.717366] RX[1] DESC e0b10c7c size = 512 [ 75.724371] E2pAccessMode=2 [ 75.727773] cfg_mode=14 [ 75.730284] cfg_mode=14 [ 75.732741] wmode_band_equal(): Band Not Equal! [ 75.854998] Key1Str is Invalid key length(0) or Type(0) [ 75.860475] Key2Str is Invalid key length(0) or Type(0) [ 75.865913] Key3Str is Invalid key length(0) or Type(0) [ 75.871376] Key4Str is Invalid key length(0) or Type(0) [ 75.892639] 1. Phy Mode = 49 [ 75.895777] Initialize MAC Address from E2PROM [ 75.900347] E2PROM MAC: 20:76:93:55:e0:f8 [ 75.904351] Use the MAC address what is assigned from EEPROM. [ 75.910215] Current MAC: 20:76:93:55:e0:f8 [ 75.914346] get_chl_grp:illegal channel (167) [ 75.918717] get_chl_grp:illegal channel (167) [ 75.923065] get_chl_grp:illegal channel (169) [ 75.927408] get_chl_grp:illegal channel (169) [ 75.931777] get_chl_grp:illegal channel (171) [ 75.936126] get_chl_grp:illegal channel (171) [ 75.940501] get_chl_grp:illegal channel (173) [ 75.944848] get_chl_grp:illegal channel (173) [ 75.949214] Country Region from e2p = ffff [ 75.953312] mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0 [ 75.961233] mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1 [ 75.968179] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9 [ 75.976966] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0 [ 75.985686] mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-7, tc_upper_bound=4 [ 75.994392] mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0 [ 76.003043] mt76x2_get_external_lna_gain::LNA type=0x1, BLNAGain=0xffffff8c, ALNAGain0=0xffffff8f, ALNAGain1=0xffffff8f, ALNAGain2=0xffffff8f [ 76.015735] 2. Phy Mode = 49 [ 76.018665] 3. Phy Mode = 49 [ 76.021567] andes_pci_fw_init [ 76.024603] 0x1300 = 00073200 [ 76.061921] AntCfgInit: primary/secondary ant 0/1 [ 76.066635] andes_load_cr:cr_type(2) [ 76.083941] MCS Set = ff ff 00 00 01 [ 80.208569] ch36 bssid=00:69:2d:f7:42:20 [ 80.212589] ch36 bssid=2c:b2:1a:69:f4:5f [ 80.216578] ch44 bssid=2c:c5:46:f7:3a:24 [ 80.220596] ch48 bssid=54:46:17:d2:71:18 [ 80.224588] ch48 bssid=56:46:17:d2:71:18 [ 80.228594] ch149 bssid=bc:2e:f6:74:da:48 [ 80.232672] ch149 bssid=bc:2e:f6:74:da:4a [ 80.236747] ch149 bssid=bc:2e:f6:f4:da:48 [ 80.240835] ch149 bssid=74:59:09:8e:1e:34 [ 80.244912] ch153 bssid=28:77:77:b1:8f:75 [ 80.249003] ch153 bssid=44:d7:91:27:f6:78 [ 80.253081] ch153 bssid=2a:77:77:d1:8f:75 [ 80.257157] ch153 bssid=54:46:17:d1:a8:fc [ 80.261245] ch153 bssid=56:46:17:d1:a8:fc [ 80.265324] ch153 bssid=44:d7:91:f7:f6:78 [ 80.269424] ch153 bssid=44:d7:91:27:f6:7a [ 80.273501] ch157 bssid=1a:f2:2c:54:21:82 [ 80.277577] ch157 bssid=78:53:0d:90:49:b6 [ 80.281677] ch157 bssid=18:f2:2c:64:21:83 [ 80.285753] ===================================================== [ 80.291837] Channel 36 : Dirty = 150, False CCA = 110, Busy Time = 0, Skip Channel = FALSE [ 80.300087] Channel 40 : Dirty = 96, False CCA = 472, Busy Time = 0, Skip Channel = FALSE [ 80.308226] Channel 44 : Dirty = 134, False CCA = 792, Busy Time = 0, Skip Channel = FALSE [ 80.316464] Channel 48 : Dirty = 172, False CCA = 1343, Busy Time = 0, Skip Channel = FALSE [ 80.324786] Channel 149 : Dirty = 504, False CCA = 0, Busy Time = 0, Skip Channel = FALSE [ 80.332948] Channel 153 : Dirty = 714, False CCA = 12, Busy Time = 0, Skip Channel = FALSE [ 80.341189] Channel 157 : Dirty = 434, False CCA = 4, Busy Time = 0, Skip Channel = FALSE [ 80.349342] Channel 161 : Dirty = 96, False CCA = 0, Busy Time = 0, Skip Channel = FALSE [ 80.357394] Channel 165 : Dirty = 0, False CCA = 0, Busy Time = 0, Skip Channel = FALSE [ 80.365365] ===================================================== [ 80.371480] Rule 1 CCA value : Min Dirtiness (Include extension channel) ==> Select Channel 149 [ 80.380235] Min Dirty = 1748 [ 80.383099] ExChannel = 0 , 0 [ 80.386048] BW = 80 [ 80.388949] mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=149, HT-CentCh=151, VHT-CentCh=155 [ 80.443598] APStartUp(): AP Set CentralFreq at 155(Prim=149, HT-CentCh=151, VHT-CentCh=155, BBP_BW=2) [ 80.462946] mt76x2_calibration(channel = 155) [ 80.834009] Main bssid = 20:76:93:55:e0:f8 [ 80.838107] mt76x2_reinit_agc_gain:original agc_vga0 = 0x42, agc_vga1 = 0x42 [ 80.845139] mt76x2_reinit_agc_gain:updated agc_vga0 = 0x42, agc_vga1 = 0x42 [ 80.852084] mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x36, hi_lna1 = 0x36 [ 80.859210] mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x36, hi_lna1 = 0x36 [ 80.866227] original vga value(chain0) = 42 [ 80.870412] original vga value(chain1) = 42 [ 80.874589] <==== rt28xx_init, Status=0 [ 80.878414] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi [ 80.886486] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi [ 80.894595] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi [ 80.902654] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi [ 80.910771] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=apclii [ 80.919078] RTMPDrvOpen(1):Check if PDMA is idle! [ 80.923839] RTMPDrvOpen(2):Check if PDMA is idle! [ 80.928584] WiFi Interface Up Time (rai0): 5.360s [ 80.935292] br-lan: port 2(rai0) entered blocking state [ 80.940577] br-lan: port 2(rai0) entered disabled state [ 80.946336] device rai0 entered promiscuous mode [ 80.951371] br-lan: port 2(rai0) entered blocking state [ 80.956618] br-lan: port 2(rai0) entered forwarding state [ 94.160003] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0 [ 94.166935] jffs2_build_filesystem(): unlocking the mtd device... [ 94.166941] done. [ 94.175075] jffs2_build_filesystem(): erasing all blocks after the end marker... [ 133.386948] done. [ 133.396549] jffs2: notice: (4359) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 134.386499] overlayfs: upper fs does not support tmpfile.

uniessey commented 2 years ago

系统日志： Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.000000] Linux version 5.10.108 (uniessey@uniessey-machine) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 8.4.0 r4369-5a916c954) 8.4.0, GNU ld (GNU Binutils) 2.34) #0 SMP Fri Mar 25 15:00:09 2022 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] printk: bootconsole [early0] enabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] MIPS: machine is Newifi-D2 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Initrd not found or empty - disabling initrd Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] VPE topology {2,2} total 4 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Zone ranges: Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Movable zone start for each node Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Early memory node ranges Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000023ffffff] Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] On node 0 totalpages: 131072 Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] Normal zone: 576 pages used for memmap Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] percpu: Embedded 15 pages/cpu s30608 r8192 d22640 u61440 Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: s30608 r8192 d22640 u61440 alloc=15*4096 Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130496 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Writing ErrCtl register=00039a10 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Readback ErrCtl register=00039a10 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Memory: 508392K/524288K available (6705K kernel code, 623K rwdata, 1396K rodata, 1244K init, 235K bss, 15896K reserved, 0K cma-reserved, 262144K highmem) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] Tracing variant of Tasks RCU enabled. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] NR_IRQS: 256 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x3d0/0x5e4 with crng_init=0 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] CPU Clock: 880MHz Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.000013] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.007950] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.016937] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.083101] pid_max: default: 32768 minimum: 301 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.087873] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.095077] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.105687] rcu: Hierarchical SRCU implementation. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.110703] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.118760] smp: Bringing up secondary CPUs ... Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.123986] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.123996] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.124010] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.124096] CPU1 revision is: 0001992f (MIPS 1004Kc) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.178627] Synchronize counters for CPU 1: done. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.210966] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.210976] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.210987] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.211043] CPU2 revision is: 0001992f (MIPS 1004Kc) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.269939] Synchronize counters for CPU 2: done. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.300483] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.300492] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.300501] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.300560] CPU3 revision is: 0001992f (MIPS 1004Kc) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.355142] Synchronize counters for CPU 3: done. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.385026] smp: Brought up 1 node, 4 CPUs Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.393403] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.403243] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.410299] pinctrl core: initialized pinctrl subsystem Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.417503] NET: Registered protocol family 16 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.424035] cpuidle: using governor teo Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 0.448381] FPU Affinity set after 11720 emulations Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.456440] random: fast init done Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.478588] clocksource: Switched to clocksource GIC Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.485705] NET: Registered protocol family 2 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.490309] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.498652] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.506977] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.514614] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.521696] TCP: Hash tables configured (established 2048 bind 2048) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.528126] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.534615] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.541786] NET: Registered protocol family 1 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.546083] PCI: CLS 0 bytes, default 32 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.552011] workingset: timestamp_bits=14 max_order=17 bucket_order=3 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.563597] squashfs: version 4.0 (2009/01/31) Phillip Lougher Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.569655] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.580695] bounce: pool size: 64 pages Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.586613] mt7621_gpio 1e000600.gpio: registering 32 gpios Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.592594] mt7621_gpio 1e000600.gpio: registering 32 gpios Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.598445] mt7621_gpio 1e000600.gpio: registering 32 gpios Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.605193] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.613384] printk: console [ttyS0] disabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.617705] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.626734] printk: console [ttyS0] enabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.634990] printk: bootconsole [early0] disabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.647554] spi-mt7621 1e000b00.spi: sys_freq: 220000000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.654278] spi-nor spi0.0: w25q256 (32768 Kbytes) Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.659250] 4 fixed-partitions partitions found on MTD device spi0.0 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.665575] Creating 4 MTD partitions on "spi0.0": Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.670520] 0x000000000000-0x000000030000 : "u-boot" Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.676466] 0x000000030000-0x000000040000 : "u-boot-env" Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.682731] 0x000000040000-0x000000050000 : "factory" Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.688750] 0x000000050000-0x000002000000 : "firmware" Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.695172] 2 uimage-fw partitions found on MTD device firmware Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.701171] Creating 2 MTD partitions on "firmware": Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.706125] 0x000000000000-0x00000029edd2 : "kernel" Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.711080] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.720190] 0x00000029edd2-0x000001fb0000 : "rootfs" Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 0.725162] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.735173] mtd: device 5 (rootfs) set to be root filesystem Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.741015] 1 squashfs-split partitions found on MTD device rootfs Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 0.747183] 0x000001020000-0x000001fb0000 : "rootfs_data" Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.764053] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.770826] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.779022] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 Fri Mar 25 23:00:35 2022 kern.err kernel: [ 0.787264] mt7621-pci 1e140000.pcie: Parsing DT failed Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.794672] NET: Registered protocol family 10 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.800794] Segment Routing with IPv6 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.804554] NET: Registered protocol family 17 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.809454] 8021q: 802.1Q VLAN Support v1.8 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.817406] gpio-export gpio_export: 1 gpio(s) exported Fri Mar 25 23:00:35 2022 kern.err kernel: [ 0.823086] rt2880-pinmux pinctrl: pcie is already enabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.828726] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.835452] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.843622] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.851897] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.859693] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.967540] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz Fri Mar 25 23:00:35 2022 kern.info kernel: [ 0.973143] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz Fri Mar 25 23:00:35 2022 kern.err kernel: [ 1.078812] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.085750] mt7621-pci 1e140000.pcie: PCIE0 enabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.090618] mt7621-pci 1e140000.pcie: PCIE1 enabled Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.095483] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.104944] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.111315] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.118168] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.125042] pci_bus 0000:00: root bus resource [bus 00-ff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.130525] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff]) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.140730] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.146731] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.152990] pci 0000:00:00.0: reg 0x14: initial BAR value 0x00000000 invalid Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.160023] pci 0000:00:00.0: reg 0x14: [mem size 0x00010000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.165818] pci 0000:00:00.0: supports D1 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.169825] pci 0000:00:00.0: PME# supported from D0 D1 D3hot Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.176041] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.182127] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.188390] pci 0000:00:01.0: reg 0x14: initial BAR value 0x00000000 invalid Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.195428] pci 0000:00:01.0: reg 0x14: [mem size 0x00010000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.201229] pci 0000:00:01.0: supports D1 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.205222] pci 0000:00:01.0: PME# supported from D0 D1 D3hot Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.212473] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.220493] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.228796] pci 0000:01:00.0: [14c3:7662] type 00 class 0x028000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.234830] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.241887] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000 64bit] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.248166] pci 0000:01:00.0: reg 0x30: initial BAR value 0x00000000 invalid Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.255199] pci 0000:01:00.0: reg 0x30: [mem size 0x00010000 pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.261474] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.269119] pci 0000:00:00.0: PCI bridge to [bus 01-ff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.274353] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.280438] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.287199] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.294422] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.301324] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.307348] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.314395] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.320272] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.327861] pci 0000:00:01.0: PCI bridge to [bus 02-ff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.333115] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.339199] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.345960] pci 0000:00:01.0: bridge window [mem 0x60000000-0x600fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.353170] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.359845] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.366432] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.373382] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.379980] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.386915] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.393692] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.400914] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.407675] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.414884] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.421675] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.428437] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.435212] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.441995] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.449301] pci 0000:01:00.0: BAR 6: assigned [mem 0x60100000-0x6010ffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.456494] pci 0000:00:00.0: PCI bridge to [bus 01] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.461452] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.468212] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.474985] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.482207] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.488985] pci 0000:00:01.0: PCI bridge to [bus 02] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.493929] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.500702] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.507461] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.524649] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.536437] Freeing unused kernel memory: 1244K Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 1.541023] This architecture does not have kernel memory protection. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 1.547456] Run /sbin/init as init process Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 1.551565] with arguments: Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 1.551573] /sbin/init Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 1.551577] with environment: Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 1.551583] HOME=/ Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 1.551588] TERM=linux Fri Mar 25 23:00:35 2022 user.info kernel: [ 2.433768] init: Console is alive Fri Mar 25 23:00:35 2022 user.info kernel: [ 2.437538] init: - watchdog - Fri Mar 25 23:00:35 2022 user.info kernel: [ 4.543214] kmodloader: loading kernel modules from /etc/modules-boot.d/ Fri Mar 25 23:00:35 2022 kern.info kernel: [ 4.932490] usbcore: registered new interface driver usbfs Fri Mar 25 23:00:35 2022 kern.info kernel: [ 4.938198] usbcore: registered new interface driver hub Fri Mar 25 23:00:35 2022 kern.info kernel: [ 4.943709] usbcore: registered new device driver usb Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 4.991381] SCSI subsystem initialized Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 5.007745] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 5.015496] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.023393] xhci-mtk 1e1c0000.xhci: xHCI Host Controller Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.028762] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.048834] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.058023] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.065263] hub 1-0:1.0: USB hub found Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.069285] hub 1-0:1.0: 2 ports detected Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.074052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.079518] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.086999] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.093600] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.102857] hub 2-0:1.0: USB hub found Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.106763] hub 2-0:1.0: 1 port detected Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.123952] usbcore: registered new interface driver usb-storage Fri Mar 25 23:00:35 2022 user.info kernel: [ 5.130702] kmodloader: done loading kernel modules from /etc/modules-boot.d/ Fri Mar 25 23:00:35 2022 user.info kernel: [ 5.139090] init: - preinit - Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 5.205816] random: crng init done Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.608834] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-mtk Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.641613] usb-storage 2-1:1.0: USB Mass Storage device detected Fri Mar 25 23:00:35 2022 kern.info kernel: [ 5.649595] scsi host0: usb-storage 2-1:1.0 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 8.220324] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC44 PQ: 0 ANSI: 6 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 8.231854] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 8.240165] sd 0:0:0:0: [sda] Write Protect is off Fri Mar 25 23:00:35 2022 kern.debug kernel: [ 8.244988] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 8.245495] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA Fri Mar 25 23:00:35 2022 user.info kernel: [ 13.650198] mount_root: loading kmods from internal overlay Fri Mar 25 23:00:35 2022 user.info kernel: [ 13.689133] kmodloader: loading kernel modules from //etc/modules-boot.d/ Fri Mar 25 23:00:35 2022 user.info kernel: [ 13.699250] kmodloader: done loading kernel modules from //etc/modules-boot.d/ Fri Mar 25 23:00:35 2022 kern.info kernel: [ 13.968232] sda: sda1 sda2 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 13.974715] sd 0:0:0:0: [sda] Attached SCSI disk Fri Mar 25 23:00:35 2022 user.info kernel: [ 14.654522] block: attempting to load /etc/config/fstab Fri Mar 25 23:00:35 2022 user.err kernel: [ 14.666738] block: unable to load configuration (fstab: Entry not found) Fri Mar 25 23:00:35 2022 user.err kernel: [ 14.673721] block: no usable configuration Fri Mar 25 23:00:35 2022 user.notice kernel: [ 14.679028] mount_root: jffs2 not ready yet, using temporary tmpfs overlay Fri Mar 25 23:00:35 2022 user.warn kernel: [ 14.701410] urandom-seed: Seed file not found (/etc/urandom.seed) Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.117724] register mt7603_drv Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.121043] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=25 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.126446] pci 0000:00:01.0: enabling device (0004 -> 0007) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.132118] mt7603_drv 0000:02:00.0: enabling device (0000 -> 0002) Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.144707] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.144707] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.144707] === pAd = 158d9365, size = 1648296 === Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.144707] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.154441] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.161112] <-- RTMPAllocAdapterBlock, Status=0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.165630] pAd->CSRBaseAddress =0xc0a00000, csr_addr=0xc0a00000! Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.171718] device_id =0x7603 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.174680] MT7603 AP Driver version 4.1.2.0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.178950] mt7603_init()--> Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.181826] mt_bcn_buf_init(224): Not support for HIF_MT yet! Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.187541] <--mt7603_init() Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.190422] load_dev_l1profile()--> Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.555716] match_index_by_chipname() MT7603 found as INDEX0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.561514] l1set_profile_path() profile update from /etc/Wireless/RT2860/RT2860AP.dat to /etc/wireless/mt7615/mt7615.1.dat Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.572648] l1set_eeprom_offset() eeprom offset remain 0x0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.578122] l1set_eeprom_size() eeprom size update from 0x200 to 0x400 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.584654] l1set_ifname() ifname rename from ra0 to ra Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.589874] l1set_ifname() ifname remain ra Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.594054] l1set_ifname() ifname remain ra Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.598230] l1set_ifname() ifname remain apcli Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.685715] register rtpci Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.688683] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.694091] pci 0000:00:00.0: enabling device (0004 -> 0007) Fri Mar 25 23:00:35 2022 kern.info kernel: [ 15.699752] rtpci 0000:01:00.0: enabling device (0000 -> 0002) Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.710878] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.710878] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.710878] === pAd = 7640d3c3, size = 1403632 === Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.710878] Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.720595] <-- RTMPAllocTxRxRingMemory, Status=0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.726092] <-- RTMPAllocAdapterBlock, Status=0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.730631] pAd->CSRBaseAddress =0xc0e00000, csr_addr=0xc0e00000! Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.736700] device_id =0x7662 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.739674] ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.749310] MT76x2 AP Driver version: 3.0.5.0 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.753681] ====> mt76x2_ePA_per_rate_compensate_init: 5944 is_ePA: 1 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.760106] RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.765478] RtmpEepromGetDefault::e2p_default=2 Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.770004] NVM is FLASH mode Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.772962] get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai Fri Mar 25 23:00:35 2022 kern.warn kernel: [ 15.780717] WiFi PCI Startup Time: 0.090s Fri Mar 25 23:00:35 2022 user.info kernel: [ 15.802333] procd: - early - Fri Mar 25 23:00:35 2022 user.info kernel: [ 15.805472] procd: - watchdog - Fri Mar 25 23:00:35 2022 user.info kernel: [ 16.398837] procd: - watchdog - Fri Mar 25 23:00:35 2022 user.info kernel: [ 16.406516] procd: - ubus - Fri Mar 25 23:00:35 2022 user.info kernel: [ 16.679997] procd: - init - Fri Mar 25 23:00:35 2022 user.info kernel: [ 17.480240] kmodloader: loading kernel modules from /etc/modules.d/ Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.509418] NET: Registered protocol family 38 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.543352] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.630295] cryptodev: driver 1.12 loaded. Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.650466] mtk-eip93 1e004000.crypto: PRNG initialized Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.662266] mtk-eip93 1e004000.crypto: EIP93 initialized succesfull Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 17.766618] ntfs3: Index binary search Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 17.770413] ntfs3: Hot fix free clusters Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 17.774315] ntfs3: Max link count 1024 Fri Mar 25 23:00:35 2022 kern.notice kernel: [ 17.778042] ntfs3: Activated 32 bits per cluster Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.791656] usbcore: registered new interface driver ums-alauda Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.799764] usbcore: registered new interface driver ums-cypress Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.807977] usbcore: registered new interface driver ums-datafab Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.816161] usbcore: registered new interface driver ums-freecom Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.824406] usbcore: registered new interface driver ums-isd200 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.832685] usbcore: registered new interface driver ums-jumpshot Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.840914] usbcore: registered new interface driver ums-karma Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.849461] usbcore: registered new interface driver ums-sddr09 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.857642] usbcore: registered new interface driver ums-sddr55 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.866576] usbcore: registered new interface driver ums-usbat Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.918116] xt_time: kernel timezone is -0000 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.927533] PPP generic driver version 2.4.2 Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.934039] PPP MPPE Compression module registered Fri Mar 25 23:00:35 2022 kern.info kernel: [ 17.940573] NET: Registered protocol family 24 Fri Mar 25 23:00:35 2022 user.info kernel: [ 17.949746] kmodloader: done loading kernel modules from /etc/modules.d/ Fri Mar 25 23:00:35 2022 daemon.notice procd: /etc/rc.d/S13openssl: Generating engines.cnf Fri Mar 25 23:00:35 2022 daemon.notice procd: /etc/rc.d/S13openssl: Enabling engine devcrypto Fri Mar 25 23:00:37 2022 user.notice dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses! Fri Mar 25 23:00:37 2022 user.notice dnsmasq: Allowing 127.0.0.0/8 responses Fri Mar 25 23:00:43 2022 kern.warn kernel: [ 51.459629] exFAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Fri Mar 25 23:00:52 2022 daemon.notice procd: /etc/rc.d/S20network: Failed to connect to the switch. Use the "list" command to see which switches are available. Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: 8021ad Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: 8021q Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: macvlan Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: veth Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: bridge Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: Network device Fri Mar 25 23:00:52 2022 user.notice : Added device handler type: tunnel Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.428227] load_dev_l1profile()--> Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.432005] l1set_profile_path() profile remain /etc/wireless/mt7615/mt7615.1.dat Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.440011] l1set_eeprom_offset() eeprom offset remain 0x0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.445521] l1set_eeprom_size() eeprom size remain 0x400 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.451050] l1set_ifname() ifname rename from ra0 to ra Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.456275] l1set_ifname() ifname remain ra Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.460698] l1set_ifname() ifname remain ra Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.464909] l1set_ifname() ifname remain apcli Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.470185] TX_BCN DESC e7a958d7 size = 320 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.474665] RX[0] DESC 7b992197 size = 2048 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.479759] RX[1] DESC 5222cbc9 size = 2048 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.490132] E2pAccessMode=2 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.493894] cfg_mode=9 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.496260] cfg_mode=9 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.498896] wmode_band_equal(): Band Equal! Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.506891] APSDCapable[0]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.509851] APSDCapable[1]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.512733] APSDCapable[2]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.515615] APSDCapable[3]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.518526] APSDCapable[4]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.521420] APSDCapable[5]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.524303] APSDCapable[6]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.527181] APSDCapable[7]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.530101] APSDCapable[8]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.533161] APSDCapable[9]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.536039] APSDCapable[10]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.539052] APSDCapable[11]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.542209] APSDCapable[12]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.545173] APSDCapable[13]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.548134] APSDCapable[14]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.551145] APSDCapable[15]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.554302] default ApCliAPSDCapable[0]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.558309] default ApCliAPSDCapable[1]=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.696325] Key1Str is Invalid key length(0) or Type(0) Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.701911] Key2Str is Invalid key length(0) or Type(0) Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.707446] Key3Str is Invalid key length(0) or Type(0) Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.713387] Key4Str is Invalid key length(0) or Type(0) Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.756203] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.761981] [PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.767733] [PMF]Set_PMFSHA256Proc:: apidx=0, Desired PMFSHA256=0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.775218] FW Version: Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.775232] C Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.777683] L Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.779306] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.780892] 7 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.782471] 3 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.784050] 7 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.785632] 6 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.787211] 6 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.788830] Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.790605] R Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.792188] Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.795249] FW Build Date: Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.795255] 2 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.797957] 0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.799798] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.801383] 7 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.802962] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.804540] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.806119] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.807695] 0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.809326] 1 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.811126] 0 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.812710] 5 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.814290] 9 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.815867] 3 Fri Mar 25 23:00:54 2022 kern.warn kernel: [ 62.817444] 2 Fri Mar 25 23:00:59 2022 daemon.err block: mounting /dev/sda1 (exfat) as /mnt/sda1 failed (16) - Not a tty Fri Mar 25 23:01:00 2022 cron.err crond[2274]: crond (busybox 1.35.0) started, log level 5 Fri Mar 25 23:01:07 2022 daemon.notice netifd: Interface 'lan' is enabled Fri Mar 25 23:01:07 2022 daemon.notice netifd: Interface 'lan' is setting up now Fri Mar 25 23:01:07 2022 daemon.notice netifd: Interface 'lan' is now up Fri Mar 25 23:01:08 2022 user.notice mwan3[2512]: Using firewall mask 0x3F00 Fri Mar 25 23:01:08 2022 user.notice mwan3[2512]: Max interface count is 60 Fri Mar 25 23:01:12 2022 daemon.notice netifd: bridge 'br-lan' link is up Fri Mar 25 23:01:12 2022 daemon.notice netifd: Interface 'lan' has link connectivity Fri Mar 25 23:01:12 2022 daemon.notice netifd: Interface 'loopback' is enabled Fri Mar 25 23:01:12 2022 daemon.notice netifd: Interface 'loopback' is setting up now Fri Mar 25 23:01:12 2022 daemon.notice netifd: Interface 'loopback' is now up Fri Mar 25 23:01:12 2022 daemon.notice netifd: Network device 'ra0' link is up Fri Mar 25 23:01:12 2022 daemon.notice netifd: Network device 'rai0' link is up Fri Mar 25 23:01:12 2022 daemon.notice netifd: Network device 'lo' link is up Fri Mar 25 23:01:12 2022 daemon.notice netifd: Interface 'loopback' has link connectivity Fri Mar 25 23:01:13 2022 authpriv.warn dropbear[2642]: Failed listening on '22': Error listening: Address not available Fri Mar 25 23:01:13 2022 authpriv.info dropbear[2642]: Not backgrounding Fri Mar 25 23:01:14 2022 daemon.err nlbwmon[2628]: The netlink receive buffer size of 1048576 bytes will be capped to 180224 bytes Fri Mar 25 23:01:14 2022 daemon.err nlbwmon[2628]: by the kernel. The net.core.rmem_max sysctl limit needs to be raised to Fri Mar 25 23:01:14 2022 daemon.err nlbwmon[2628]: at least 1048576 in order to sucessfully set the desired receive buffer size! Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Found user 'nobody' (UID 65534) and group 'nogroup' (GID 65534). Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Successfully dropped root privileges. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: avahi-daemon 0.8 starting up. Fri Mar 25 23:01:15 2022 daemon.warn avahi-daemon[2858]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: No service file found in /etc/avahi/services. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Joining mDNS multicast group on interface br-lan.IPv6 with address fdaf:df4c:7797::1. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: New relevant interface br-lan.IPv6 for mDNS. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Joining mDNS multicast group on interface br-lan.IPv4 with address 192.168.1.1. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: New relevant interface br-lan.IPv4 for mDNS. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Joining mDNS multicast group on interface lo.IPv6 with address ::1. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: New relevant interface lo.IPv6 for mDNS. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: New relevant interface lo.IPv4 for mDNS. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Network interface enumeration completed. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Registering new address record for fdaf:df4c:7797::1 on br-lan.. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Registering new address record for 192.168.1.1 on br-lan.IPv4. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Registering new address record for ::1 on lo.. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Registering new address record for 127.0.0.1 on lo.IPv4. Fri Mar 25 23:01:15 2022 daemon.info avahi-daemon[2858]: Registering HINFO record with values 'MIPS'/'LINUX'. Fri Mar 25 23:01:15 2022 daemon.notice procd: /etc/rc.d/S90kms: KMS Server has started. Fri Mar 25 23:01:15 2022 daemon.notice procd: /etc/rc.d/S90kms: uci: Entry not found Fri Mar 25 23:01:15 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) Fri Mar 25 23:01:16 2022 daemon.info avahi-daemon[2858]: Server startup complete. Host name is OpenWrt.local. Local service cookie is 1295068303. Fri Mar 25 23:01:16 2022 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: started, v1.35.0 Fri Mar 25 23:01:16 2022 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: broadcasting discover Fri Mar 25 23:01:16 2022 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan) Fri Mar 25 23:01:19 2022 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: no lease, failing Fri Mar 25 23:01:20 2022 user.notice nlbwmon: Reloading nlbwmon due to ifup of loopback (lo) Fri Mar 25 23:01:20 2022 daemon.notice procd: /etc/rc.d/S90turboacc: net.ipv4.tcp_congestion_control = cubic Fri Mar 25 23:01:20 2022 daemon.notice procd: /etc/rc.d/S90turboacc: Stop DNS Caching Fri Mar 25 23:01:24 2022 daemon.notice procd: /etc/rc.d/S90turboacc: DNSMASQ change Fri Mar 25 23:02:06 2022 daemon.info mount_root: performing overlay whiteout Fri Mar 25 23:02:06 2022 daemon.info mount_root: synchronizing overlay Fri Mar 25 23:02:06 2022 daemon.err mount_root: failed to sync jffs2 overlay Fri Mar 25 23:02:07 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led internet Fri Mar 25 23:02:07 2022 daemon.notice procd: /etc/rc.d/S96led: Skipping trigger 'switch0' for led 'internet' due to missing kernel module Fri Mar 25 23:02:07 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led WiFi 2.4GHz Fri Mar 25 23:02:07 2022 daemon.notice procd: /etc/rc.d/S96led: setting up led WiFi 5GHz Fri Mar 25 23:02:10 2022 daemon.info urandom_seed[4641]: Seed saved (/etc/urandom.seed) Fri Mar 25 23:02:15 2022 daemon.info procd: - init complete - Fri Mar 25 23:02:20 2022 daemon.err nmbd[4521]: [2022/03/25 23:02:20.787029, 0] ../../lib/util/become_daemon.c:136(daemon_ready) Fri Mar 25 23:02:20 2022 daemon.err nmbd[4521]: daemon_ready: daemon 'nmbd' finished starting up and ready to serve connections Fri Mar 25 23:02:23 2022 daemon.err smbd[4520]: [2022/03/25 23:02:23.910074, 0] ../../source3/passdb/pdb_smbpasswd.c:250(startsmbfilepwent) Fri Mar 25 23:02:23 2022 daemon.err smbd[4520]: startsmbfilepwent_internal: file /etc/samba/smbpasswd did not exist. File successfully created. Fri Mar 25 23:02:24 2022 daemon.err smbd[4520]: [2022/03/25 23:02:24.149827, 0] ../../lib/util/become_daemon.c:136(daemon_ready) Fri Mar 25 23:02:24 2022 daemon.err smbd[4520]: daemon_ready: daemon 'smbd' finished starting up and ready to serve connections Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]: [2022/03/25 23:02:44.037220, 0] ../../source3/nmbd/nmbd_become_lmb.c:398(become_local_master_stage2) Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]: Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]: Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]: Samba name server OPENWRT is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.1 Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]: Fri Mar 25 23:02:44 2022 daemon.err nmbd[4521]:

uniessey commented 2 years ago

编译信息：

ake[5]: Leaving directory '/home/uniessey/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.10.108' make -C /home/uniessey/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.10.108 KCFLAGS="-fmacro-prefix-map=/home/uniessey/lede/build_dir/target-mipsel_24kc_musl=target-mipsel_24kc_musl" HOSTCFLAGS="-O2 -I/home/uniessey/lede/staging_dir/host/include -Wall -Wmissing-prototypes -Wstrict-prototypes" CROSS_COMPILE="mipsel-openwrt-linux-musl-" ARCH="mips" KBUILD_HAVE_NLS=no KBUILD_BUILD_USER="" KBUILD_BUILD_HOST="" KBUILD_BUILD_TIMESTAMP="Sat Mar 26 01:36:39 2022" KBUILD_BUILD_VERSION="0" HOST_LOADLIBES="-L/home/uniessey/lede/staging_dir/host/lib" KBUILD_HOSTLDLIBS="-L/home/uniessey/lede/staging_dir/host/lib" CONFIG_SHELL="bash" V='' cmd_syscalls= KERNELRELEASE=5.10.108 CC="mipsel-openwrt-linux-musl-gcc" vmlinux vmlinuz modules make[5]: Entering directory '/home/uniessey/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.10.108' CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CC drivers/net/ethernet/ralink/mtk_eth_soc.o In file included from drivers/net/ethernet/ralink/mtk_eth_soc.c:41: drivers/net/ethernet/ralink/mtk_eth_soc.h:533:15: warning: 'struct flow_offload_hw_path' declared inside parameter list will not be visible outside of this definition or declaration struct flow_offload_hw_path src, ^~~~~~~~ drivers/net/ethernet/ralink/mtk_eth_soc.c:1519:10: warning: 'struct flow_offload_hw_path' declared inside parameter list will not be visible outside of this definition or declaration struct flow_offload_hw_path src, ^~~~~~~~ drivers/net/ethernet/ralink/mtk_eth_soc.c: In function 'fe_flow_offload': drivers/net/ethernet/ralink/mtk_eth_soc.c:1524:9: error: dereferencing pointer to incomplete type 'struct flow_offload_hw_path' if (src->dev != dest->dev) ^~ drivers/net/ethernet/ralink/mtk_eth_soc.c:1529:44: error: passing argument 4 of 'mtk_flow_offload' from incompatible pointer type [-Werror=incompatible-pointer-types] return mtk_flow_offload(priv, type, flow, src, dest); ^~~ In file included from drivers/net/ethernet/ralink/mtk_eth_soc.c:41: drivers/net/ethernet/ralink/mtk_eth_soc.h:533:37: note: expected 'struct flow_offload_hw_path ' but argument is of type 'struct flow_offload_hw_path ' struct flow_offload_hw_path *src,


drivers/net/ethernet/ralink/mtk_eth_soc.c:1529:49: error: passing argument 5 of 'mtk_flow_offload' from incompatible pointer type [-Werror=incompatible-pointer-types]
  return mtk_flow_offload(priv, type, flow, src, dest);
                                                 ^~~~
In file included from drivers/net/ethernet/ralink/mtk_eth_soc.c:41:
drivers/net/ethernet/ralink/mtk_eth_soc.h:534:37: note: expected 'struct flow_offload_hw_path *' but argument is of type 'struct flow_offload_hw_path *'
        struct flow_offload_hw_path *dest);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
drivers/net/ethernet/ralink/mtk_eth_soc.c: At top level:
drivers/net/ethernet/ralink/mtk_eth_soc.c:1551:3: error: 'const struct net_device_ops' has no member named 'ndo_flow_offload'
  .ndo_flow_offload = fe_flow_offload,
   ^~~~~~~~~~~~~~~~
drivers/net/ethernet/ralink/mtk_eth_soc.c:1551:22: error: initialization of 'int (*)(struct net_device *, int,  u8 *)' {aka 'int (*)(struct net_device *, int,  unsigned char *)'} from incompatible pointer type 'int (*)(enum flow_offload_type,  struct flow_offload *, struct flow_offload_hw_path *, struct flow_offload_hw_path *)' [-Werror=incompatible-pointer-types]
  .ndo_flow_offload = fe_flow_offload,
                      ^~~~~~~~~~~~~~~
drivers/net/ethernet/ralink/mtk_eth_soc.c:1551:22: note: (near initialization for 'fe_netdev_ops.ndo_set_vf_mac')
cc1: some warnings being treated as errors
make[9]: *** [scripts/Makefile.build:280: drivers/net/ethernet/ralink/mtk_eth_soc.o] Error 1
make[8]: *** [scripts/Makefile.build:497: drivers/net/ethernet/ralink] Error 2
make[7]: *** [scripts/Makefile.build:497: drivers/net/ethernet] Error 2
make[6]: *** [scripts/Makefile.build:497: drivers/net] Error 2
make[5]: *** [Makefile:1822: drivers] Error 2
make[5]: Leaving directory '/home/uniessey/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.10.108'
make[4]: *** [Makefile:25: /home/uniessey/lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.10.108/.modules] Error 2
make[4]: Leaving directory '/home/uniessey/lede/target/linux/ramips'
make[3]: *** [Makefile:11: compile] Error 2
make[3]: Leaving directory '/home/uniessey/lede/target/linux'
time: target/linux/compile#12.80#7.66#19.43
    ERROR: target/linux failed to build.
make[2]: *** [target/Makefile:25: target/linux/compile] Error 1
make[2]: Leaving directory '/home/uniessey/lede'
make[1]: *** [target/Makefile:18: /home/uniessey/lede/staging_dir/target-mipsel_24kc_musl/stamp/.target_compile] Error 2
make[1]: Leaving directory '/home/uniessey/lede'
make: *** [/home/uniessey/lede/include/toplevel.mk:230：world] 错误 2

WYC-2020 commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

uniessey commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

好的，大佬。就是这个连接中的修复：https://github.com/coolsnowwolf/lede/commit/29d4ee71ed4ce51fceeb0e5b3b85555f7f81ede0

WYC-2020 commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

好的，大佬。就是这个连接中的修复：29d4ee7

这个修理我说过，不行，只是当时没人在意而已，你用我仓库的编译试下可以工作不，然后我在给你说怎么修复

uniessey commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

好的，大佬。就是这个连接中的修复：29d4ee7

这个修理我说过，不行，只是当时没人在意而已，你用我仓库的编译试下可以工作不，然后我在给你说怎么修复

收到，马上去试试，然后反馈。

uniessey commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

好的，大佬。就是这个连接中的修复：29d4ee7

这个修理我说过，不行，只是当时没人在意而已，你用我仓库的编译试下可以工作不，然后我在给你说怎么修复

用您的代码的确可以正常编译，也能很好的刷进去工作，除了总览界面信息不完整之外，其他没发现问题。编译了接近40个小时。

WYC-2020 commented 2 years ago

什么8925。贴链接，这个玩意5.10是不支持offload的，用5.4，有人说xr那边修复了，我看了，并没有，那只是解决了编译，也是不能支持odfload的，都没有任何地方调用offload相关代码

好的，大佬。就是这个连接中的修复：29d4ee7

这个修理我说过，不行，只是当时没人在意而已，你用我仓库的编译试下可以工作不，然后我在给你说怎么修复

用您的代码的确可以正常编译，也能很好的刷进去工作，除了总览界面信息不完整之外，其他没发现问题。编译了接近40个小时。

什么信息不完整，截图看下

coolsnowwolf / lede