配置不能保存，重启配置丢失

(2) 路由器型号和固件版本 A：root@OpenWrt:~# cat /proc/cpuinfo processor : 0 cpu : APM821XX clock : 1000.000010MHz revision : 28.131 (pvr 12c4 1c83) bogomips : 2000.00

timebase : 1000000010 platform : PowerPC 44x Platform model : Netgear WNDR4700/WNDR4720 Series Memory : 256 MB 查看当前路由器的架构 root@OpenWrt:~# opkg print-architecture | awk '{print $2}' all noarch powerpc_464fp

日志信息(必填！)

删除相关防火墙规则完成。清空并关闭相关程序和缓存完成。 TCP节点：[my-NodeA]216.240.128.200:11740，监听端口：1041 过滤服务配置：准备接管域名解析...

[0]Pdnsd (127.0.0.1:7913)... | - [0]上游DNS：8.8.4.4:53
域名解析：pdnsd + 使用(TCP节点)解析域名...
请确认上游 DNS 支持 TCP 查询，如非直连地址，确保 TCP 代理打开，并且已经正确转发！ | - (chinadns-ng) 最高支持4级域名过滤... | - 0 代理域名表合并到防火墙域名表 | - 0 域名白名单合并到中国域名表
过滤服务：ChinaDNS-NG(:7914)：国内DNS：223.5.5.5,8.8.8.8，可信DNS：127.0.0.1#7913
节点列表中的域名(vpsiplist)：223.5.5.5,8.8.8.8
域名白名单(whitelist)：223.5.5.5,8.8.8.8
节点订阅域名(blacklist)：127.0.0.1#7913
代理域名表(blacklist)：127.0.0.1#7913
防火墙域名表(gfwlist)：默认
中国域名表(chnroute)：默认
以上所列以外及默认：127.0.0.1#7914
PassWall必须依赖于Dnsmasq，如果你自行配置了错误的DNS流程，将会导致域名(直连/代理域名)分流失效！！！开始加载防火墙规则... 加入负载均衡的节点到ipset[vpsiplist]直连完成加入所有节点到ipset[vpsiplist]直连完成加载路由器自身 TCP 代理...
[0]将上游 DNS 服务器 8.8.4.4:53 加入到路由器自身代理的 TCP 转发链加载路由器自身 UDP 代理... TCP默认代理：使用TCP节点[my-NodeA] 中国列表以外代理所有端口 UDP默认代理：使用UDP节点[my-NodeA] 中国列表以外代理所有端口防火墙规则加载完成！重启 dnsmasq 服务配置定时任务：自动更新规则。运行完成！

截图

系统相关信息(必填)

Chrome 版本 101.0.4951.41（正式版本）（64 位）未启用安全dns

其他相关信息

kern.info : Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] kern.debugl: On node 0 totalpages: 65536 kern.debugl: Normal zone: 576 pages used for memmap kern.debugl: Normal zone: 0 pages reserved kern.debugl: Normal zone: 65536 pages, LIFO batch:15 kern.info : MMU: Allocated 1088 bytes of context maps for 255 contexts kern.debugl: pcpu-alloc: s0 r0 d32768 u32768 alloc=132768 kern.debugl: pcpu-alloc: [0] 0 kern.info : Built 1 zonelists, mobility grouping on. Total pages: 64960 kern.noticel] Kernel command line: rootfstype=squashfs noinitrd kern.info : Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) kern.info : Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) kern.info : mem auto-init: stack:off, heap alloc:off, heap free:off kern.info : Memory: 251732K/262144K available (5876K kernel code, 220K rwdata, 1272K rodata, 172K init, 229K bss, 10412K reserved, 0K cma-reserved) kern.info : Kernel virtual memory layout: kern.info : 0xfffdf000..0xfffff000 : fixmap kern.info : * 0xd1000000..0xfffdf000 : vmalloc & ioremap kern.info : SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 kern.info : NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 kern.warn : UIC0 (32 IRQ sources) at DCR 0xc0 kern.warn : UIC1 (32 IRQ sources) at DCR 0xd0 kern.warn : UIC2 (32 IRQ sources) at DCR 0xe0 kern.warn : UIC3 (32 IRQ sources) at DCR 0xf0 kern.noticel] random: get_random_u32 called from start_kernel+0x2e4/0x3f4 with crng_init=0 kern.debugl: time_init: decrementer frequency = 1000.000010 MHz kern.debugl: time_init: processor frequency = 1000.000010 MHz kern.info : clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns kern.info : clocksource: timebase mult[800000] shift[23] registered kern.debugl: clockevent: decrementer mult[80000015] shift[31] cpu[0] kern.info : pid_max: default: 32768 minimum: 301 kern.info : Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) kern.info : Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) kern.info : clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kern.info : futex hash table entries: 256 (order: -1, 3072 bytes, linear) kern.info : NET: Registered protocol family 16 kern.info : DMA: preallocated 256 KiB pool for atomic allocations kern.info : 256k L2-cache enabled kern.info : PCIE0: Checking link... kern.info : PCIE0: Device detected, waiting for link... kern.info : PCIE0: link is up ! kern.info : PCI host bridge /plb/pciex@d00000000 (primary) ranges: kern.info : MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000 kern.info : MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000 kern.info : IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000 kern.info : 4xx PCI DMA offset set to 0x00000000 kern.info : 4xx PCI DMA window base to 0x0000000000000000 kern.info : DMA window size 0x0000000080000000 kern.info : PCIE0: successfully set as root-complex kern.info : PCI: Probing PCI hardware kern.info : PCI host bridge to bus 0000:40 kern.info : pci_bus 0000:40: root bus resource [io 0x0000-0xffff] kern.info : pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff]) kern.info : pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff]) kern.info : pci_bus 0000:40: root bus resource [bus 40-ff] kern.info : pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to ff kern.info : pci 0000:40:00.0: [aaa0:bed0] type 01 class 0x060400 kern.info : pci 0000:40:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref] kern.info : PCI: Hiding 4xx host bridge resources 0000:40:00.0 kern.info : pci 0000:41:00.0: [111d:803a] type 01 class 0x060400 kern.info : pci 0000:41:00.0: Max Payload Size set to 256 (was 128, max 256) kern.info : pci 0000:41:00.0: enabling Extended Tags kern.info : pci 0000:41:00.0: PME# supported from D0 D3hot D3cold kern.info : pci 0000:40:00.0: PCI bridge to [bus 41-7f] kern.info : pci 0000:40:00.0: bridge window [io 0x0000-0x0fff] kern.info : pci 0000:40:00.0: bridge window [mem 0xe30000000-0xe302fffff] kern.info : pci 0000:41:00.0: bridge configuration invalid ([bus 02-05]), reconfiguring kern.info : pci 0000:42:02.0: [111d:803a] type 01 class 0x060400 kern.info : pci 0000:42:02.0: Max Payload Size set to 256 (was 128, max 256) kern.info : pci 0000:42:02.0: enabling Extended Tags kern.info : pci 0000:42:02.0: PME# supported from D0 D3hot D3cold kern.info : pci 0000:42:03.0: [111d:803a] type 01 class 0x060400 kern.info : pci 0000:42:03.0: Max Payload Size set to 256 (was 128, max 256) kern.info : pci 0000:42:03.0: enabling Extended Tags kern.info : pci 0000:42:03.0: PME# supported from D0 D3hot D3cold kern.info : pci 0000:42:04.0: [111d:803a] type 01 class 0x060400 kern.info : pci 0000:42:04.0: Max Payload Size set to 256 (was 128, max 256) kern.info : pci 0000:42:04.0: enabling Extended Tags kern.info : pci 0000:42:04.0: PME# supported from D0 D3hot D3cold kern.info : pci 0000:41:00.0: PCI bridge to [bus 42-7f] kern.info : pci 0000:41:00.0: bridge window [mem 0xe30000000-0xe302fffff] kern.info : pci 0000:42:02.0: bridge configuration invalid ([bus 03-03]), reconfiguring kern.info : pci 0000:42:03.0: bridge configuration invalid ([bus 04-04]), reconfiguring kern.info : pci 0000:42:04.0: bridge configuration invalid ([bus 05-05]), reconfiguring kern.info : pci 0000:43:00.0: [168c:0030] type 00 class 0x028000 kern.info : pci 0000:43:00.0: reg 0x10: [mem 0xe30000000-0xe3001ffff 64bit] kern.info : pci 0000:43:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref] kern.warn : pci 0000:43:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug kern.info : pci 0000:43:00.0: supports D1 kern.info : pci 0000:43:00.0: PME# supported from D0 D1 D3hot kern.info : pci 0000:42:02.0: PCI bridge to [bus 43-7f] kern.info : pci 0000:42:02.0: bridge window [mem 0xe30000000-0xe300fffff] kern.info : pci_bus 0000:43: busn_res: [bus 43-7f] end is updated to 43 kern.info : pci 0000:44:00.0: [168c:0033] type 00 class 0x028000 kern.info : pci 0000:44:00.0: reg 0x10: [mem 0xe30100000-0xe3011ffff 64bit] kern.info : pci 0000:44:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref] kern.warn : pci 0000:44:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug kern.info : pci 0000:44:00.0: supports D1 kern.info : pci 0000:44:00.0: PME# supported from D0 D1 D3hot kern.info : pci 0000:42:03.0: PCI bridge to [bus 44-7f] kern.info : pci 0000:42:03.0: bridge window [mem 0xe30100000-0xe301fffff] kern.info : pci_bus 0000:44: busn_res: [bus 44-7f] end is updated to 44 kern.info : pci 0000:45:00.0: [1912:0015] type 00 class 0x0c0330 kern.info : pci 0000:45:00.0: reg 0x10: [mem 0xe30200000-0xe30201fff 64bit] kern.warn : pci 0000:45:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug kern.info : pci 0000:45:00.0: PME# supported from D0 D3hot kern.info : pci 0000:45:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:40:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) kern.info : pci 0000:42:04.0: PCI bridge to [bus 45-7f] kern.info : pci 0000:42:04.0: bridge window [mem 0xe30200000-0xe302fffff] kern.info : pci_bus 0000:45: busn_res: [bus 45-7f] end is updated to 45 kern.info : pci_bus 0000:42: busn_res: [bus 42-7f] end is updated to 45 kern.info : pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to 7f kern.info : pci 0000:40:00.0: disabling bridge window [io 0x0000-0xffffffffffffffff] to [bus 41-7f] (unused) kern.info : pci 0000:40:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff] kern.info : pci 0000:41:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff] kern.info : pci 0000:42:02.0: BAR 8: assigned [mem 0xe00000000-0xe000fffff] kern.info : pci 0000:42:03.0: BAR 8: assigned [mem 0xe00100000-0xe001fffff] kern.info : pci 0000:42:04.0: BAR 8: assigned [mem 0xe00200000-0xe002fffff] kern.info : pci 0000:43:00.0: BAR 0: assigned [mem 0xe00000000-0xe0001ffff 64bit] kern.info : pci 0000:43:00.0: BAR 6: assigned [mem 0xe00020000-0xe0002ffff pref] kern.info : pci 0000:42:02.0: PCI bridge to [bus 43] kern.info : pci 0000:42:02.0: bridge window [mem 0xe00000000-0xe000fffff] kern.info : pci 0000:44:00.0: BAR 0: assigned [mem 0xe00100000-0xe0011ffff 64bit] kern.info : pci 0000:44:00.0: BAR 6: assigned [mem 0xe00120000-0xe0012ffff pref] kern.info : pci 0000:42:03.0: PCI bridge to [bus 44] kern.info : pci 0000:42:03.0: bridge window [mem 0xe00100000-0xe001fffff] kern.info : pci 0000:45:00.0: BAR 0: assigned [mem 0xe00200000-0xe00201fff 64bit] kern.info : pci 0000:42:04.0: PCI bridge to [bus 45] kern.info : pci 0000:42:04.0: bridge window [mem 0xe00200000-0xe002fffff] kern.info : pci 0000:41:00.0: PCI bridge to [bus 42-45] kern.info : pci 0000:41:00.0: bridge window [mem 0xe00000000-0xe002fffff] kern.info : pci 0000:40:00.0: PCI bridge to [bus 41-7f] kern.info : pci 0000:40:00.0: bridge window [mem 0xe00000000-0xe002fffff] kern.info : pci_bus 0000:40: resource 4 [io 0x0000-0xffff] kern.info : pci_bus 0000:40: resource 5 [mem 0xe00000000-0xe7fffffff] kern.info : pci_bus 0000:40: resource 6 [mem 0xf00000000-0xf000fffff] kern.info : pci_bus 0000:41: resource 1 [mem 0xe00000000-0xe002fffff] kern.info : pci_bus 0000:42: resource 1 [mem 0xe00000000-0xe002fffff] kern.info : pci_bus 0000:43: resource 1 [mem 0xe00000000-0xe000fffff] kern.info : pci_bus 0000:44: resource 1 [mem 0xe00100000-0xe001fffff] kern.info kernel: pci_bus 0000:45: resource 1 [mem 0xe00200000-0xe002fffff] kern.notice kernel SCSI subsystem initialized kern.debug kernel: libata version 3.00 loaded. kern.warn kernel: workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 kern.info kernel: clocksource: Switched to clocksource timebase kern.info kernel: thermal_sys: Registered thermal governor 'step_wise' kern.info kernel: NET: Registered protocol family 2 kern.info kernel: IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) kern.info kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) kern.info kernel: TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) kern.info kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear) kern.info kernel: TCP: Hash tables configured (established 2048 bind 2048) kern.info kernel: UDP hash table entries: 256 (order: 0, 4096 bytes, linear) kern.info kernel: UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) kern.info kernel: NET: Registered protocol family 1 kern.warn kernel: pci 0000:45:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801 kern.info kernel: pci 0000:45:00.0: quirk_usb_early_handoff+0x0/0x844 took 5712948 usecs kern.info kernel: PCI: CLS 32 bytes, default 32 kern.info kernel: dw_dmac 4bffd0800.dma: DesignWare DMA Controller, 2 channels kern.info kernel: workingset: timestamp_bits=14 max_order=16 bucket_order=2 kern.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher kern.warn kernel: pcie_pme: probe of 0000:40:00.0:pcie001 failed with error -22 kern.err kernel: [cieport 0000:40:00.0: AER: request AER IRQ 0 failed kern.warn kernel: aer: probe of 0000:40:00.0:pcie002 failed with error -22 kern.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled kern.info kernel: printk: console [ttyS0] disabled kern.info kernel: 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 36, base_baud = 347222) is a TI16750 kern.info kernel: printk: console [ttyS0] enabled kern.notice kernel] sata-dwc 4bffd1800.sata: id 0, controller version 1.91 kern.info kernel: scsi host0: sata-dwc kern.info kernel: ata1: SATA max UDMA/133 irq 44 kern.info kernel: nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 kern.info kernel: nand: Hynix H27U1G8F2BTR-BC kern.info kernel: nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 kern.info kernel: Scanning device for bad blocks kern.notice kernel: 12 fixed-partitions partitions found on MTD device 4e4000000.ndfc.nand kern.notice kernel: Creating 12 MTD partitions on "4e4000000.ndfc.nand": kern.notice kernel: 0x000000000000-0x000008000000 : "NAND 128MiB 3,3V 8-bit" kern.notice kernel: 0x000000000000-0x000000180000 : "uboot" kern.notice kernel: 0x000000180000-0x0000001a0000 : "device-tree" kern.notice kernel: 0x000000180000-0x000000500000 : "kernel" kern.notice kernel: 0x000000500000-0x0000019e0000 : "ubi" kern.notice kernel: 0x0000019e0000-0x000001a60000 : "config" kern.notice kernel: 0x000001a60000-0x000001ae0000 : "pot" kern.notice kernel: 0x000001ae0000-0x000001de0000 : "traffic_meter" kern.notice kernel: 0x000001de0000-0x000001fa0000 : "language" kern.notice kernel: 0x000001fa0000-0x000007fc0000 : "ecos" kern.notice kernel: 0x000007fc0000-0x000008000000 : "wifi_data" kern.notice kernel: 0x000000180000-0x0000019e0000 : "firmware" kern.info kernel: PPC 4xx OCP EMAC driver, version 3.54 kern.info kernel: MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels kern.info kernel: RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support kern.info kernel: TAH /plb/opb/emac-tah@ef601350 initialized kern.notice kernel5] /plb/opb/emac-rgmii@ef601500: input 0 in rgmii mode kern.info kernel: switch0: Atheros AR8327 rev. 4 switch registered on 4ef600c00.ethernet kern.info kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kern.info kernel: ata1.00: ATA-8: ST9500424AS, 0001BSM1, max UDMA/133 kern.info kernel: ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 1/32) kern.info kernel: ata1.00: configured for UDMA/133 kern.notice kernel3] scsi 0:0:0:0: Direct-Access ATA ST9500424AS BSM1 PQ: 0 ANSI: 5 kern.notice kernel7] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) kern.notice kernel8] sd 0:0:0:0: [sda] 4096-byte physical blocks kern.notice kernel8] sd 0:0:0:0: [sda] Write Protect is off kern.debug kernel:] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 kern.notice kernel6] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA kern.info kernel: sda: sda1 sda2 sda3 kern.notice kernel1] sd 0:0:0:0: [sda] Attached SCSI disk kern.info kernel: eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 20:e5:2a:55:36:34 kern.warn kernel: eth0: found Atheros AR8216/AR8236/AR8316 PHY (0x00) kern.info kernel: i2c /dev entries driver kern.info kernel: ibm-iic 4ef600700.i2c: using standard (100 kHz) mode kern.warn kernel: lm90 0-004d: 0-004d supply vcc not found, using dummy regulator kern.info kernel: booke_wdt: powerpc book-e watchdog driver loaded kern.info kernel: NET: Registered protocol family 10 kern.info kernel: Segment Routing with IPv6 kern.info kernel: NET: Registered protocol family 17 kern.info kernel: 8021q: 802.1Q VLAN Support v1.8 kern.info kernel: drmem: No dynamic reconfiguration memory found kern.notice kernel7] UBI: auto-attach mtd4 kern.notice kernel4] ubi0: attaching mtd4 kern.notice kernel6] ubi0: scanning is finished kern.warn kernel: ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 9, need 20 kern.notice kernel6] ubi0: attached mtd4 (name "ubi", size 20 MiB) kern.notice kernel5] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes kern.notice kernel7] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 kern.notice kernel7] ubi0: VID header offset: 512 (aligned 512), data offset: 2048 kern.notice kernel7] ubi0: good PEBs: 167, bad PEBs: 0, corrupted PEBs: 0 kern.notice kernel1] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 kern.notice kernel5] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1650885502 kern.notice kernel1] ubi0: available PEBs: 0, total reserved PEBs: 167, PEBs reserved for bad PEB handling: 9 kern.notice kernel7] ubi0: background thread "ubi_bgt0d" started, PID 482 kern.info kernel: block ubiblock0_0: created from ubi0:0(rootfs) kern.notice kernel4] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem kern.info kernel: hctosys: unable to open rtc device (rtc0) kern.info kernel: VFS: Mounted root (squashfs filesystem) readonly on device 259:0. kern.info kernel: Freeing unused kernel memory: 172K kern.info kernel: Run /sbin/init as init process user.info kernel: init: Console is alive user.info kernel: init: - watchdog - user.info kernel: kmodloader: loading kernel modules from /etc/modules-boot.d/ kern.notice kernel2] Key type encrypted registered kern.info kernel: usbcore: registered new interface driver usbfs kern.info kernel: usbcore: registered new interface driver hub kern.info kernel: usbcore: registered new device driver usb kern.info kernel: raid6: using algorithm int32x8 gen() 0 MB/s kern.info kernel: raid6: .... xor() 0 MB/s, rmw enabled kern.info kernel: raid6: using intx1 recovery algorithm kern.info kernel: xor: measuring software checksum speed kern.info kernel: 8regs : 817.600 MB/sec kern.info kernel: 8regs_prefetch: 705.600 MB/sec kern.info kernel: 32regs : 1147.200 MB/sec kern.info kernel: 32regs_prefetch: 938.400 MB/sec kern.info kernel: xor: using function: 32regs (1147.200 MB/sec) kern.info kernel: Btrfs loaded, crc32c=crc32c-generic kern.warn kernel: dwc2 4bff80000.usbotg: 4bff80000.usbotg supply vusb_d not found, using dummy regulator kern.warn kernel: dwc2 4bff80000.usbotg: 4bff80000.usbotg supply vusb_a not found, using dummy regulator kern.info kernel: dwc2 4bff80000.usbotg: DWC OTG Controller kern.info kernel: dwc2 4bff80000.usbotg: new USB bus registered, assigned bus number 1 kern.info kernel: dwc2 4bff80000.usbotg: irq 40, io mem 0x4bff80000 kern.info kernel: hub 1-0:1.0: USB hub found kern.info kernel: hub 1-0:1.0: 1 port detected kern.warn kernel: xhci_hcd 0000:45:00.0: Direct firmware load for K2013080.mem failed with error -2 kern.warn kernel: xhci_hcd 0000:45:00.0: Falling back to sysfs fallback for: K2013080.mem kern.info kernel: usbcore: registered new interface driver usb-storage user.info kernel: kmodloader: done loading kernel modules from /etc/modules-boot.d/ user.info kernel: init: - preinit - kern.info kernel: Atheros AR8216/AR8236/AR8316 4ef600c00.ethernet:00: Port 2 is up kern.info kernel: usb 1-1: new high-speed USB device number 2 using dwc2 kern.info kernel: usb-storage 1-1:1.0: USB Mass Storage device detected kern.info kernel: scsi host1: usb-storage 1-1:1.0 kern.notice kernel7] random: procd: uninitialized urandom read (4 bytes read) kern.info kernel: eth0: link is up, 1000 FDX kern.notice kernel6] scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0 kern.notice kernel5] sd 1:0:0:0: [sdb] Attached SCSI removable disk user.info kernel: mount_root: loading kmods from internal overlay user.info kernel: kmodloader: loading kernel modules from //etc/modules-boot.d/ user.info kernel: kmodloader: done loading kernel modules from //etc/modules-boot.d/ kern.notice kernel7] random: fast init done user.info kernel: block: attempting to load /etc/config/fstab user.err kernel: [block: unable to load configuration (fstab: Entry not found) user.err kernel: [block: no usable configuration kern.err kernel: [UBIFS error (ubi0:1 pid 646): ubifs_mount: too few LEBs (9), min. is 17 user.err kernel: [mount_root: failed to mount -t ubifs /dev/ubi0_1 /tmp/overlay: Invalid argument user.info kernel: block: attempting to load /etc/config/fstab user.err kernel: [block: unable to load configuration (fstab: Entry not found) user.err kernel: [block: no usable configuration user.info kernel: mount_root: overlay filesystem has not been fully initialized yet user.info kernel: mount_root: switching to ubifs overlay user.err kernel: [mount_root: switching to ubifs failed - fallback to ramoverlay user.warn kernel: urandom-seed: Seed file not found (/etc/urandom.seed) user.info kernel: procd: - early - user.info kernel: procd: - watchdog - user.info kernel: procd: - watchdog - user.info kernel: procd: - ubus - kern.notice kernel5] random: ubusd: uninitialized urandom read (4 bytes read) kern.notice kernel6] random: ubusd: uninitialized urandom read (4 bytes read) kern.notice kernel8] random: ubusd: uninitialized urandom read (4 bytes read) user.info kernel: procd: - init - user.info kernel: kmodloader: loading kernel modules from /etc/modules.d/* kern.info kernel: NET: Registered protocol family 38 kern.info kernel: device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com kern.info kernel: tun: Universal TUN/TAP device driver, 1.6 kern.info kernel: cryptodev: driver 1.12 loaded. kern.info kernel: GACT probability on kern.info kernel: Mirror/redirect action on kern.info kernel: u32 classifier kern.info kernel: input device check on kern.info kernel: Actions configured kern.info kernel: Loading modules backported from Linux version v5.15.8-0-g43e577d7a2cb kern.info kernel: Backport generated by backports.git v5.15.8-1-0-g83f664bb kern.warn kernel: appfilter version:5.0.1 kern.warn kernel: open feature file failed kern.warn kernel: error, feature buf is null kern.warn kernel: load feature failed kern.info kernel: xt_time: kernel timezone is -0000 kern.info kernel: PPP generic driver version 2.4.2 kern.info kernel: PPP MPPE Compression module registered kern.info kernel: NET: Registered protocol family 24 kern.warn kernel: ath9k 0000:43:00.0: Direct firmware load for ath9k-eeprom-pci-0000:43:00.0.bin failed with error -2 kern.warn kernel: ath9k 0000:43:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:43:00.0.bin kern.debug kernel:] ath: EEPROM regdomain sanitized kern.debug kernel:] ath: EEPROM regdomain: 0x64 kern.debug kernel:] ath: EEPROM indicates we should expect a direct regpair map kern.debug kernel:] ath: Country alpha2 being used: 00 kern.debug kernel:] ath: Regpair used: 0x64 kern.debug kernel:] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' kern.info kernel: ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xd5a00000, irq=19 kern.warn kernel: ath9k 0000:44:00.0: Direct firmware load for ath9k-eeprom-pci-0000:44:00.0.bin failed with error -2 kern.warn kernel: ath9k 0000:44:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:44:00.0.bin kern.debug kernel:] ath: EEPROM regdomain sanitized kern.debug kernel:] ath: EEPROM regdomain: 0x64 kern.debug kernel:] ath: EEPROM indicates we should expect a direct regpair map kern.debug kernel:] ath: Country alpha2 being used: 00 kern.debug kernel:] ath: Regpair used: 0x64 kern.debug kernel:] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' kern.info kernel: ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xd5a40000, irq=20 kern.warn kernel: appfilter version:5.0.1 kern.warn kernel: open feature file failed kern.warn kernel: error, feature buf is null kern.warn kernel: load feature failed user.err kernel: [kmodloader: 1 module could not be probed user.err kernel: [kmodloader: - oaf - 0 kern.notice kernel7] crng init done kern.notice kernel4] random: 6 urandom warning(s) missed due to ratelimiting daemon.notice proS13openssl: Generating engines.cnf daemon.notice proc13openssl: Enabling engine devcrypto user.notice dnsmasng protection is active, will discard upstream RFC1918 responses! user.notice dnsmas7.0.0.0/8 responses daemon.notice wpa_9]: Successfully initialized wpa_supplicant user.notice : Addeer type: 8021ad user.notice : Addeer type: 8021q user.notice : Addeer type: macvlan user.notice : Addeer type: veth user.notice : Addeer type: bridge user.notice : Addeer type: Network device user.notice : Addeer type: tunnel daemon.err block: utility available daemon.err block: mtdblock4 (ubi) as /mnt/mtdblock4 failed (25) - Not a tty kern.info kernel: EXT4-fs (sda1): recovery complete kern.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: kern.info kernel: EXT4-fs (sda2): recovery complete kern.info kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: kern.info kernel: EXT4-fs (sda3): recovery complete kern.info kernel: EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: kern.info kernel: eth0: link is up, 1000 FDX kern.info kernel: br-lan: port 1(eth0.1) entered blocking state kern.info kernel: br-lan: port 1(eth0.1) entered disabled state kern.info kernel: device eth0.1 entered promiscuous mode kern.info kernel: device eth0 entered promiscuous mode kern.info kernel: br-lan: port 1(eth0.1) entered blocking state kern.info kernel: br-lan: port 1(eth0.1) entered forwarding state daemon.notice netifd: Interface 'lan' is enabled daemon.notice netifd: Interface 'lan' is setting up now daemon.notice netifd: Interface 'lan' is now up daemon.notice netifd: bridge 'br-lan' link is up daemon.notice netifd: Interface 'lan' has link connectivity daemon.notice netifd: VLAN 'eth0.1' link is up daemon.notice netifd: Interface 'loopback' is enabled daemon.notice netifd: Interface 'loopback' is setting up now daemon.notice netifd: Interface 'loopback' is now up daemon.notice netifd: Interface 'wan' is enabled daemon.notice netifd: Interface 'wan6' is enabled daemon.notice netifd: Network device 'eth0' link is up daemon.notice netifd: Network device 'lo' link is up daemon.notice netifd: Interface 'loopback' has link connectivity daemon.notice netifd: VLAN 'eth0.2' link is up daemon.notice netifd: Interface 'wan' has link connectivity daemon.notice netifd: Interface 'wan' is setting up now daemon.notice netifd: Interface 'wan6' has link connectivity daemon.notice netifd: Interface 'wan6' is setting up now daemon.notice netifd: Interface 'wan6' is now up daemon.notice netifd: wan (2597): udhcpc: started, v1.35.0 user.notice firewall: Reloading firewall due to ifup of lan (br-lan) daemon.notice procd: /etc/rc.d/S50autoreboot: Command failed: Not found kern.info kernel: [ 54.935739] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready daemon.notice netifd: wan (2597): udhcpc: broadcasting discover daemon.notice procd: /etc/rc.d/S50autoreboot: Auto REBOOT has started. cron.err crond[2739]: crond (busybox 1.35.0) started, log level 5 kern.debug kernel: ath: EEPROM regdomain: 0x8348 kern.debug kernel: ath: EEPROM indicates we should expect a country code kern.debug kernel: ath: doing EEPROM country->regdmn map search kern.debug kernel: ath: country maps to regdmn code: 0x3a kern.debug kernel: ath: Country alpha2 being used: US kern.debug kernel: ath: Regpair used: 0x3a kern.debug kernel: ath: regdomain 0x8348 dynamically updated by user kern.debug kernel: ath: EEPROM regdomain: 0x8348 kern.debug kernel: ath: EEPROM indicates we should expect a country code kern.debug kernel: ath: doing EEPROM country->regdmn map search kern.debug kernel: ath: country maps to regdmn code: 0x3a kern.debug kernel: ath: Country alpha2 being used: US kern.debug kernel: ath: Regpair used: 0x3a kern.debug kernel: ath: regdomain 0x8348 dynamically updated by user authpriv.warn dropbear[2884]: Failed listening on '22': Error listening: Address not available authpriv.info dropbear[2884]: Not backgrounding daemon.notice netifd: wan (2597): udhcpc: broadcasting discover daemon.notice hostapd: Configuration file: /var/run/hostapd-phy1.conf (phy wlan1) --> new PHY kern.info kernel: br-lan: port 2(wlan1) entered blocking state kern.info kernel: br-lan: port 2(wlan1) entered disabled state kern.info kernel: device wlan1 entered promiscuous mode daemon.notice hostapd: wlan1: interface state UNINITIALIZED->COUNTRY_UPDATE kern.info kernel: [ 58.597817] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready kern.info kernel: [ 58.604294] br-lan: port 2(wlan1) entered blocking state kern.info kernel: [ 58.609613] br-lan: port 2(wlan1) entered forwarding state daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY kern.info kernel: [ 58.738825] br-lan: port 3(wlan0) entered blocking state kern.info kernel: [ 58.744122] br-lan: port 3(wlan0) entered disabled state kern.info kernel: [ 58.749737] device wlan0 entered promiscuous mode kern.info kernel: [ 58.754598] br-lan: port 3(wlan0) entered blocking state kern.info kernel: [ 58.759937] br-lan: port 3(wlan0) entered forwarding state daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE kern.info kernel: [ 58.840261] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->ENABLED daemon.notice hostapd: wlan0: AP-ENABLED daemon.notice hostapd: wlan1: interface state COUNTRY_UPDATE->ENABLED daemon.notice hostapd: wlan1: AP-ENABLED user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan) daemon.notice netifd: Network device 'wlan1' link is up daemon.notice netifd: Network device 'wlan0' link is up daemon.notice netifd: wan (2597): udhcpc: broadcasting discover daemon.notice procd: /etc/rc.d/S90kms: KMS Server has started. daemon.notice procd: /etc/rc.d/S90kms: uci: Entry not found daemon.info avahi-daemon[3621]: Found user 'nobody' (UID 65534) and group 'nogroup' (GID 65534). daemon.info avahi-daemon[3621]: Successfully dropped root privileges. daemon.info avahi-daemon[3621]: avahi-daemon 0.8 starting up. daemon.warn avahi-daemon[3621]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns! daemon.info avahi-daemon[3621]: No service file found in /etc/avahi/services. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::22e5:2aff:fe55:3634. daemon.info avahi-daemon[3621]: New relevant interface wlan0.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface wlan1.IPv6 with address fe80::22e5:2aff:fe55:3636. daemon.info avahi-daemon[3621]: New relevant interface wlan1.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface eth0.2.IPv6 with address fe80::22e5:2aff:fe55:3634. daemon.info avahi-daemon[3621]: New relevant interface eth0.2.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface br-lan.IPv6 with address fd01:842a:4e03::1. daemon.info avahi-daemon[3621]: New relevant interface br-lan.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface br-lan.IPv4 with address 192.168.0.2. daemon.info avahi-daemon[3621]: New relevant interface br-lan.IPv4 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::22e5:2aff:fe55:3634. daemon.info avahi-daemon[3621]: New relevant interface eth0.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface lo.IPv6 with address ::1. daemon.info avahi-daemon[3621]: New relevant interface lo.IPv6 for mDNS. daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface lo.IPv4 with address 127.0.0.1. daemon.info avahi-daemon[3621]: New relevant interface lo.IPv4 for mDNS. daemon.info avahi-daemon[3621]: Network interface enumeration completed. daemon.info avahi-daemon[3621]: Registering new address record for fe80::22e5:2aff:fe55:3634 on wlan0.. daemon.info avahi-daemon[3621]: Registering new address record for fe80::22e5:2aff:fe55:3636 on wlan1.. daemon.info avahi-daemon[3621]: Registering new address record for fe80::22e5:2aff:fe55:3634 on eth0.2.. daemon.info avahi-daemon[3621]: Registering new address record for fd01:842a:4e03::1 on br-lan.. daemon.info avahi-daemon[3621]: Registering new address record for 192.168.0.2 on br-lan.IPv4. daemon.info avahi-daemon[3621]: Registering new address record for fe80::22e5:2aff:fe55:3634 on eth0.. daemon.info avahi-daemon[3621]: Registering new address record for ::1 on lo.. daemon.info avahi-daemon[3621]: Registering new address record for 127.0.0.1 on lo.IPv4. daemon.info avahi-daemon[3621]: Registering HINFO record with values 'PPC'/'LINUX'. user.notice nlbwmon: Reloading nlbwmon due to ifup of loopback (lo) daemon.notice procd: /etc/rc.d/S90kms: udhcpc: started, v1.35.0 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: broadcasting discover daemon.notice procd: /etc/rc.d/S90kms: udhcpc: broadcasting select for 192.168.0.18, server 192.168.0.1 daemon.notice procd: /etc/rc.d/S90kms: udhcpc: lease of 192.168.0.18 obtained from 192.168.0.1, lease time 7200 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override daemon.info avahi-daemon[3621]: Server startup complete. Host name is OpenWrt.local. Local service cookie is 2558782513. user.notice firewall: Reloading firewall due to ifup of wan6 (eth0.2) daemon.notice procd: /etc/rc.d/S90turboacc: net.ipv4.tcp_congestion_control = cubic daemon.notice procd: /etc/rc.d/S90turboacc: Stop DNS Caching user.notice nlbwmon: Reloading nlbwmon due to ifup of wan6 (eth0.2) user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override daemon.notice procd: /etc/rc.d/S90turboacc: DNSMASQ change user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override daemon.notice procd: /etc/rc.d/S96appfilter: #class chat daemon.notice procd: /etc/rc.d/S96appfilter: #class game daemon.notice procd: /etc/rc.d/S96appfilter: #class video daemon.notice procd: /etc/rc.d/S96appfilter: #class shopping daemon.notice procd: /etc/rc.d/S96appfilter: #class music daemon.notice procd: /etc/rc.d/S96appfilter: #class employee daemon.notice procd: /etc/rc.d/S96appfilter: #class download daemon.notice procd: /etc/rc.d/S96appfilter: #class website kern.err kernel: [ 74.727664] xhci_hcd 0000:45:00.0: firmware failed to load kern.warn kernel: [ 74.734978] xhci_hcd 0000:45:00.0: Direct firmware load for K2026090.mem failed with error -2 kern.warn kernel: [ 74.743601] xhci_hcd 0000:45:00.0: Falling back to sysfs fallback for: K2026090.mem daemon.err procd: Could not find firmware /lib/firmware/K2026090.mem: No such file or directory kern.err kernel: [ 74.920842] xhci_hcd 0000:45:00.0: firmware failed to load kern.info kernel: [ 74.926425] xhci_hcd 0000:45:00.0: Unloading driver daemon.notice procd: /etc/rc.d/S96appfilter: ok kern.warn kernel: [ 76.146968] appfilter version:5.0.1 kern.warn kernel: [ 76.153119] init oaf sysctl...ok daemon.notice procd: /etc/rc.d/S96appfilter: reload appfilter rule... daemon.notice procd: /etc/rc.d/S96appfilter: clean appfilter rule... daemon.notice procd: /etc/rc.d/S96appfilter: config json str={ "op": 3, "data": { } } daemon.notice procd: /etc/rc.d/S96appfilter: config json str={ "op": 1, "data": { "apps": [ ] } } daemon.notice procd: /etc/rc.d/S96appfilter: mac list= daemon.notice procd: /etc/rc.d/S96appfilter: config json str={ "op": 4, "data": { "mac_list": [ ] } } kern.warn kernel: [ 76.447943] recv user msg kern.warn kernel: [ 76.450607] oaf msg handle, action = 0 kern.warn kernel: [ 76.454337] module init......... daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (green) daemon.notice procd: /etc/rc.d/S96led: setting up led WAN (yellow) daemon.info aria2: Instance "main" disabled.

daemon.notice procd: /etc/rc.d/S99rtty: Disabled daemon.notice procd: /etc/rc.d/S99wifidog: Starting Wifidog ... daemon.notice procd: /etc/rc.d/S99wifidog: Testing for iptables modules daemon.notice procd: /etc/rc.d/S99wifidog: Testing ipt_mac daemon.notice procd: /etc/rc.d/S99wifidog: ipt_mac module is working daemon.notice procd: /etc/rc.d/S99wifidog: Testing ipt_mark daemon.notice procd: /etc/rc.d/S99wifidog: ipt_mark module is working daemon.notice procd: /etc/rc.d/S99wifidog: Testing ipt_REDIRECT daemon.notice procd: /etc/rc.d/S99wifidog: ipt_REDIRECT module is working daemon.info urandom_seed[7345]: Seed saved (/etc/urandom.seed) daemon.err wsdd2: samba36/4 or ksmbd is not running, can't start wsdd2! daemon.notice procd: /etc/rc.d/S99zerotier: disabled in config daemon.info procd: - init complete - daemon.info procd: Instance haproxy::instance1 s in a crash loop 6 crashes, 0 seconds since last crash cron.err crond[2739]: time disparity of 3731 minutes detected

daemon.info hostapd: wlan0: STA e2:b3:74:78:e9:d7 IEEE 802.11: authenticated daemon.info hostapd: wlan0: STA e2:b3:74:78:e9:d7 IEEE 802.11: associated (aid 2) daemon.notice hostapd: wlan0: AP-STA-CONNECTED e2:b3:74:78:e9:d7

daemon.err uhttpd[3170]: Error: Error opening /dev/sdb: No medium found daemon.err uhttpd[3170]: /usr/lib/lua/luci/dispatcher.lua:474: Failed to execute call dispatcher target for entry '/admin/system/diskman/get_disk_info/sdb'. daemon.err uhttpd[3170]: The called action terminated with an exception: daemon.err uhttpd[3170]: /usr/lib/lua/luci/model/diskman.lua:250: attempt to index local 'result' (a nil value) daemon.err uhttpd[3170]: stack traceback: daemon.err uhttpd[3170]: [C]: in function 'assert' daemon.err uhttpd[3170]: /usr/lib/lua/luci/dispatcher.lua:474: in function 'dispatch' daemon.err uhttpd[3170]: /usr/lib/lua/luci/dispatcher.lua:126: in function </usr/lib/lua/luci/dispatcher.lua:125> cron.err crond[6366]: crond (busybox 1.35.0) started, log level 5 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override cron.err crond[6775]: crond (busybox 1.35.0) started, log level 5 daemon.info hostapd: wlan0: STA 52:38:69:d9:9f:e9 IEEE 802.11: authenticated daemon.info hostapd: wlan0: STA 52:38:69:d9:9f:e9 IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) daemon.notice hostapd: wlan0: STA 92:4e:48:dc:f1:ef IEEE 802.11: did not acknowledge authentication response daemon.info hostapd: wlan0: STA 92:4e:48:dc:f1:ef IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) cron.err crond[2841]: crond (busybox 1.35.0) started, log level 5 user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override daemon.info pdnsd[3317]: pdnsd-1.2.9b-par starting. user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override cron.err crond[4390]: crond (busybox 1.35.0) started, log level 5 daemon.err uhttpd[3170]: netstat: showing only processes with your user ID daemon.notice netifd: Interface 'lan' is now down daemon.info avahi-daemon[3621]: Registering new address record for fe80::22e5:2aff:fe55:3634 on br-lan.*. daemon.info avahi-daemon[3621]: Withdrawing address record for 192.168.0.2 on br-lan. daemon.info avahi-daemon[3621]: Leaving mDNS multicast group on interface br-lan.IPv4 with address 192.168.0.2. daemon.info avahi-daemon[3621]: Interface br-lan.IPv4 no longer relevant for mDNS. kern.info kernel: [33443.305542] br-lan: port 3(wlan0) entered disabled state kern.info kernel: [33443.310994] br-lan: port 2(wlan1) entered disabled state kern.info kernel: [33443.316350] br-lan: port 1(eth0.1) entered disabled state daemon.info avahi-daemon[3621]: Interface br-lan.IPv6 no longer relevant for mDNS. daemon.info avahi-daemon[3621]: Leaving mDNS multicast group on interface br-lan.IPv6 with address fd01:842a:4e03::1. daemon.info avahi-daemon[3621]: Withdrawing address record for fe80::22e5:2aff:fe55:3634 on br-lan. daemon.info avahi-daemon[3621]: Withdrawing address record for fd01:842a:4e03::1 on br-lan. kern.info kernel: [33443.376311] device eth0.1 left promiscuous mode kern.info kernel: [33443.380833] device eth0 left promiscuous mode kern.info kernel: [33443.385343] br-lan: port 1(eth0.1) entered disabled state kern.info kernel: [33443.443133] device wlan0 left promiscuous mode kern.info kernel: [33443.447825] br-lan: port 3(wlan0) entered disabled state kern.info kernel: [33443.477272] device wlan1 left promiscuous mode kern.info kernel: [33443.481803] br-lan: port 2(wlan1) entered disabled state daemon.notice netifd: Interface 'lan' is disabled daemon.notice netifd: Interface 'lan' is enabled daemon.notice netifd: Interface 'lan' is setting up now daemon.info avahi-daemon[3621]: Joining mDNS multicast group on interface br-lan.IPv4 with address 192.168.0.2. daemon.info avahi-daemon[3621]: New relevant interface br-lan.IPv4 for mDNS. daemon.info avahi-daemon[3621]: Registering new address record for 192.168.0.2 on br-lan.IPv4. daemon.notice netifd: Interface 'lan' is now up user.notice firewall: Reloading firewall due to ifup of lan (br-lan) user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override authpriv.info dropbear[2884]: Early exit: Terminated by signal authpriv.info dropbear[8493]: Not backgrounding user.notice dnsmasq: found already running DHCP-server on interface 'br-lan' refusing to start, use 'option force 1' to override user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan)

内核日志

Linux version 5.4.190 (james@james-VirtualBox) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r4489-ce2fb409e)) #0 Mon Apr 25 11:18:22 2022 Using PowerPC 44x Platform machine description

phys_mem_size = 0x10000000 dcache_bsize = 0x20 icache_bsize = 0x20 cpu_features = 0x0000000000000120 possible = 0x0000000040000120 always = 0x0000000000000120 cpu_user_features = 0x8c008000 0x00000000 mmu_features = 0x00000008

Top of RAM: 0x10000000, Total RAM: 0x10000000 Memory hole size: 0MB Zone ranges: Normal [mem 0x0000000000000000-0x000000000fffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x000000000fffffff] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] On node 0 totalpages: 65536 Normal zone: 576 pages used for memmap Normal zone: 0 pages reserved Normal zone: 65536 pages, LIFO batch:15 MMU: Allocated 1088 bytes of context maps for 255 contexts pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists, mobility grouping on. Total pages: 64960 Kernel command line: rootfstype=squashfs noinitrd Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) mem auto-init: stack:off, heap alloc:off, heap free:off Memory: 251732K/262144K available (5876K kernel code, 220K rwdata, 1272K rodata, 172K init, 229K bss, 10412K reserved, 0K cma-reserved) Kernel virtual memory layout:

0xfffdf000..0xfffff000 : fixmap
0xd1000000..0xfffdf000 : vmalloc & ioremap SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 UIC3 (32 IRQ sources) at DCR 0xf0 random: get_random_u32 called from start_kernel+0x2e4/0x3f4 with crng_init=0 time_init: decrementer frequency = 1000.000010 MHz time_init: processor frequency = 1000.000010 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns clocksource: timebase mult[800000] shift[23] registered clockevent: decrementer mult[80000015] shift[31] cpu[0] pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic allocations 256k L2-cache enabled PCIE0: Checking link... PCIE0: Device detected, waiting for link... PCIE0: link is up ! PCI host bridge /plb/pciex@d00000000 (primary) ranges: MEM 0x0000000e00000000..0x0000000e7fffffff -> 0x0000000080000000 MEM 0x0000000f00000000..0x0000000f000fffff -> 0x0000000000000000 IO 0x0000000f80000000..0x0000000f8000ffff -> 0x0000000000000000 4xx PCI DMA offset set to 0x00000000 4xx PCI DMA window base to 0x0000000000000000 DMA window size 0x0000000080000000 PCIE0: successfully set as root-complex PCI: Probing PCI hardware PCI host bridge to bus 0000:40 pci_bus 0000:40: root bus resource [io 0x0000-0xffff] pci_bus 0000:40: root bus resource [mem 0xe00000000-0xe7fffffff] (bus address [0x80000000-0xffffffff]) pci_bus 0000:40: root bus resource [mem 0xf00000000-0xf000fffff] (bus address [0x00000000-0x000fffff]) pci_bus 0000:40: root bus resource [bus 40-ff] pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to ff pci 0000:40:00.0: [aaa0:bed0] type 01 class 0x060400 pci 0000:40:00.0: reg 0x10: [mem 0x00000000-0x7fffffff pref] PCI: Hiding 4xx host bridge resources 0000:40:00.0 pci :41:00.0: [111d:803a] type 01 class 0x060400 pci :41:00.0: Max Payload Size set to 256 (was 128, max 256) pci :41:00.0: enabling Extended Tags pci :41:00.0: PME# supported from D0 D3hot D3cold pci :40:00.0: PCI bridge to [bus 41-7f] pci :40:00.0: bridge window [io 0x0000-0x0fff] pci :40:00.0: bridge window [mem 0xe30000000-0xe302fffff] pci :41:00.0: bridge configuration invalid ([bus 02-05]), reconfiguring pci :42:02.0: [111d:803a] type 01 class 0x060400 pci :42:02.0: Max Payload Size set to 256 (was 128, max 256) pci :42:02.0: enabling Extended Tags pci :42:02.0: PME# supported from D0 D3hot D3cold pci :42:03.0: [111d:803a] type 01 class 0x060400 pci :42:03.0: Max Payload Size set to 256 (was 128, max 256) pci :42:03.0: enabling Extended Tags pci :42:03.0: PME# supported from D0 D3hot D3cold pci :42:04.0: [111d:803a] type 01 class 0x060400 pci :42:04.0: Max Payload Size set to 256 (was 128, max 256) pci :42:04.0: enabling Extended Tags pci :42:04.0: PME# supported from D0 D3hot D3cold pci :41:00.0: PCI bridge to [bus 42-7f] pci :41:00.0: bridge window [mem 0xe30000000-0xe302fffff] pci :42:02.0: bridge configuration invalid ([bus 03-03]), reconfiguring pci :42:03.0: bridge configuration invalid ([bus 04-04]), reconfiguring pci :42:04.0: bridge configuration invalid ([bus 05-05]), reconfiguring pci :43:00.0: [168c:0030] type 00 class 0x028000 pci :43:00.0: reg 0x10: [mem 0xe30000000-0xe3001ffff 64bit] pci :43:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref] pci :43:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug pci :43:00.0: supports D1 pci :43:00.0: PME# supported from D0 D1 D3hot pci :42:02.0: PCI bridge to [bus 43-7f] pci :42:02.0: bridge window [mem 0xe30000000-0xe300fffff] pci_bus 0000:43: busn_res: [bus 43-7f] end is updated to 43 pci :44:00.0: [168c:0033] type 00 class 0x028000 pci :44:00.0: reg 0x10: [mem 0xe30100000-0xe3011ffff 64bit] pci :44:00.0: reg 0x30: [mem 0xf00000000-0xf0000ffff pref] pci :44:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug pci :44:00.0: supports D1 pci :44:00.0: PME# supported from D0 D1 D3hot pci :42:03.0: PCI bridge to [bus 44-7f] pci :42:03.0: bridge window [mem 0xe30100000-0xe301fffff] pci_bus 0000:44: busn_res: [bus 44-7f] end is updated to 44 pci :45:00.0: [1912:0015] type 00 class 0x0c0330 pci :45:00.0: reg 0x10: [mem 0xe30200000-0xe30201fff 64bit] pci :45:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug pci :45:00.0: PME# supported from D0 D3hot pci :45:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:40:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) pci :42:04.0: PCI bridge to [bus 45-7f] pci :42:04.0: bridge window [mem 0xe30200000-0xe302fffff] pci_bus 0000:45: busn_res: [bus 45-7f] end is updated to 45 pci_bus 0000:42: busn_res: [bus 42-7f] end is updated to 45 pci_bus 0000:40: busn_res: [bus 40-ff] end is updated to 7f pci 40:00.0: disabling bridge window [io 0x0000-0xffffffffffffffff] to [bus 41-7f] (unused) pci 40:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff] pci 41:00.0: BAR 8: assigned [mem 0xe00000000-0xe002fffff] pci 42:02.0: BAR 8: assigned [mem 0xe00000000-0xe000fffff] pci 42:03.0: BAR 8: assigned [mem 0xe00100000-0xe001fffff] pci 42:04.0: BAR 8: assigned [mem 0xe00200000-0xe002fffff] pci 43:00.0: BAR 0: assigned [mem 0xe00000000-0xe0001ffff 64bit] pci 43:00.0: BAR 6: assigned [mem 0xe00020000-0xe0002ffff pref] pci 42:02.0: PCI bridge to [bus 43] pci 42:02.0: bridge window [mem 0xe00000000-0xe000fffff] pci 44:00.0: BAR 0: assigned [mem 0xe00100000-0xe0011ffff 64bit] pci 44:00.0: BAR 6: assigned [mem 0xe00120000-0xe0012ffff pref] pci 42:03.0: PCI bridge to [bus 44] pci 42:03.0: bridge window [mem 0xe00100000-0xe001fffff] pci 45:00.0: BAR 0: assigned [mem 0xe00200000-0xe00201fff 64bit] pci 42:04.0: PCI bridge to [bus 45] pci 42:04.0: bridge window [mem 0xe00200000-0xe002fffff] pci 41:00.0: PCI bridge to [bus 42-45] pci 41:00.0: bridge window [mem 0xe00000000-0xe002fffff] pci 40:00.0: PCI bridge to [bus 41-7f] pci 40:00.0: bridge window [mem 0xe00000000-0xe002fffff] pci_bus 40: resource 4 [io 0x0000-0xffff] pci_bus 40: resource 5 [mem 0xe00000000-0xe7fffffff] pci_bus 40: resource 6 [mem 0xf00000000-0xf000fffff] pci_bus 41: resource 1 [mem 0xe00000000-0xe002fffff] pci_bus 42: resource 1 [mem 0xe00000000-0xe002fffff] pci_bus 43: resource 1 [mem 0xe00000000-0xe000fffff] pci_bus 44: resource 1 [mem 0xe00100000-0xe001fffff] pci_bus 45: resource 1 [mem 0xe00200000-0xe002fffff] SCSI subsystem initialized libata version 3.00 loaded. workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 clocksource: Switched to clocksource timebase thermal_sys: Registered thermal governor 'step_wise' NET: Registered protocol family 2 IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 0, 4096 bytes, linear) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) NET: Registered protocol family 1 pci 0000:45:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801 pci 0000:45:00.0: quirk_usb_early_handoff+0x0/0x844 took 5712948 usecs PCI: CLS 32 bytes, default 32 dw_dmac 4bffd0800.dma: DesignWare DMA Controller, 2 channels workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher pcie_pme: probe of 0000:40:00.0:pcie001 failed with error -22 pcieport 0000:40:00.0: AER: request AER IRQ 0 failed aer: probe of 0000:40:00.0:pcie002 failed with error -22 Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled printk: console [ttyS0] disabled 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 36, base_baud = 347222) is a TI16750 printk: console [ttyS0] enabled sata-dwc 4bffd1800.sata: id 0, controller version 1.91 scsi host0: sata-dwc ata1: SATA max UDMA/133 irq 44 nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 nand: Hynix H27U1G8F2BTR-BC nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Scanning device for bad blocks 12 fixed-partitions partitions found on MTD device 4e4000000.ndfc.nand Creating 12 MTD partitions on "4e4000000.ndfc.nand": 0x000000000000-0x000008000000 : "NAND 128MiB 3,3V 8-bit" 0x000000000000-0x000000180000 : "uboot" 0x000000180000-0x0000001a0000 : "device-tree" 0x000000180000-0x000000500000 : "kernel" 0x000000500000-0x0000019e0000 : "ubi" 0x0000019e0000-0x000001a60000 : "config" 0x000001a60000-0x000001ae0000 : "pot" 0x000001ae0000-0x000001de0000 : "traffic_meter" 0x000001de0000-0x000001fa0000 : "language" 0x000001fa0000-0x000007fc0000 : "ecos" 0x000007fc0000-0x000008000000 : "wifi_data" 0x000000180000-0x0000019e0000 : "firmware" PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 1 TX channels, 1 RX channels RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support TAH /plb/opb/emac-tah@ef601350 initialized /plb/opb/emac-rgmii@ef601500: input 0 in rgmii mode switch0: Atheros AR8327 rev. 4 switch registered on 4ef600c00.ethernet ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: ST9500424AS, 0001BSM1, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 1/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA ST9500424AS BSM1 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) sd 0:0:0:0: [sda] 4096-byte physical blocks sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 20:e5:2a:55:36:34 eth0: found Atheros AR8216/AR8236/AR8316 PHY (0x00) i2c /dev entries driver ibm-iic 4ef600700.i2c: using standard (100 kHz) mode lm90 0-004d: 0-004d supply vcc not found, using dummy regulator booke_wdt: powerpc book-e watchdog driver loaded NET: Registered protocol family 10 Segment Routing with IPv6 NET: Registered protocol family 17 8021q: 802.1Q VLAN Support v1.8 drmem: No dynamic reconfiguration memory found UBI: auto-attach mtd4 ubi0: attaching mtd4 ubi0: scanning is finished ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 9, need 20 ubi0: attached mtd4 (name "ubi", size 20 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 ubi0: VID header offset: 512 (aligned 512), data offset: 2048 ubi0: good PEBs: 167, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1650885502 ubi0: available PEBs: 0, total reserved PEBs: 167, PEBs reserved for bad PEB handling: 9 ubi0: background thread "ubi_bgt0d" started, PID 482 block ubiblock0_0: created from ubi0:0(rootfs) ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem hctosys: unable to open rtc device (rtc0) VFS: Mounted root (squashfs filesystem) readonly on device 259:0. Freeing unused kernel memory: 172K Run /sbin/init as init process init: Console is alive init: - watchdog - kmodloader: loading kernel modules from /etc/modules-boot.d/ Key type encrypted registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb raid6: using algorithm int32x8 gen() 0 MB/s raid6: .... xor() 0 MB/s, rmw enabled raid6: using intx1 recovery algorithm xor: measuring software checksum speed 8regs : 817.600 MB/sec 8regs_prefetch: 705.600 MB/sec 32regs : 1147.200 MB/sec 32regs_prefetch: 938.400 MB/sec xor: using function: 32regs (1147.200 MB/sec) Btrfs loaded, crc32c=crc32c-generic dwc2 4bff80000.usbotg: 4bff80000.usbotg supply vusb_d not found, using dummy regulator dwc2 4bff80000.usbotg: 4bff80000.usbotg supply vusb_a not found, using dummy regulator dwc2 4bff80000.usbotg: DWC OTG Controller dwc2 4bff80000.usbotg: new USB bus registered, assigned bus number 1 dwc2 4bff80000.usbotg: irq 40, io mem 0x4bff80000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci_hcd 0000:45:00.0: Direct firmware load for K2013080.mem failed with error -2 xhci_hcd 0000:45:00.0: Falling back to sysfs fallback for: K2013080.mem usbcore: registered new interface driver usb-storage kmodloader: done loading kernel modules from /etc/modules-boot.d/ init: - preinit - Atheros AR8216/AR8236/AR8316 4ef600c00.ethernet:00: Port 2 is up usb 1-1: new high-speed USB device number 2 using dwc2 usb-storage 1-1:1.0: USB Mass Storage device detected scsi host1: usb-storage 1-1:1.0 random: procd: uninitialized urandom read (4 bytes read) eth0: link is up, 1000 FDX scsi 1:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0 sd 1:0:0:0: [sdb] Attached SCSI removable disk mount_root: loading kmods from internal overlay kmodloader: loading kernel modules from //etc/modules-boot.d/ kmodloader: done loading kernel modules from //etc/modules-boot.d/ random: fast init done block: attempting to load /etc/config/fstab block: unable to load configuration (fstab: Entry not found) block: no usable configuration UBIFS error (ubi0:1 pid 646): ubifs_mount: too few LEBs (9), min. is 17 mount_root: failed to mount -t ubifs /dev/ubi0_1 /tmp/overlay: Invalid argument block: attempting to load /etc/config/fstab block: unable to load configuration (fstab: Entry not found) block: no usable configuration mount_root: overlay filesystem has not been fully initialized yet mount_root: switching to ubifs overlay mount_root: switching to ubifs failed - fallback to ramoverlay urandom-seed: Seed file not found (/etc/urandom.seed) procd: - early - procd: - watchdog - procd: - watchdog - procd: - ubus - random: ubusd: uninitialized urandom read (4 bytes read) random: ubusd: uninitialized urandom read (4 bytes read) random: ubusd: uninitialized urandom read (4 bytes read) procd: - init - kmodloader: loading kernel modules from /etc/modules.d/* NET: Registered protocol family 38 device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com tun: Universal TUN/TAP device driver, 1.6 cryptodev: driver 1.12 loaded. GACT probability on Mirror/redirect action on u32 classifier input device check on Actions configured Loading modules backported from Linux version v5.15.8-0-g43e577d7a2cb Backport generated by backports.git v5.15.8-1-0-g83f664bb appfilter version:5.0.1 open feature file failed error, feature buf is null load feature failed xt_time: kernel timezone is -0000 PPP generic driver version 2.4.2 PPP MPPE Compression module registered NET: Registered protocol family 24 ath9k 0000:43:00.0: Direct firmware load for ath9k-eeprom-pci-0000:43:00.0.bin failed with error -2 ath9k 0000:43:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:43:00.0.bin ath: EEPROM regdomain sanitized ath: EEPROM regdomain: 0x64 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x64 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xd5a00000, irq=19 ath9k 0000:44:00.0: Direct firmware load for ath9k-eeprom-pci-0000:44:00.0.bin failed with error -2 ath9k 0000:44:00.0: Falling back to sysfs fallback for: ath9k-eeprom-pci-0000:44:00.0.bin ath: EEPROM regdomain sanitized ath: EEPROM regdomain: 0x64 ath: EEPROM indicates we should expect a direct regpair map ath: Country alpha2 being used: 00 ath: Regpair used: 0x64 ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xd5a40000, irq=20 appfilter version:5.0.1 open feature file failed error, feature buf is null load feature failed kmodloader: 1 module could not be probed kmodloader: - oaf - 0 crng init done random: 6 urandom warning(s) missed due to ratelimiting EXT4-fs (sda1): recovery complete EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: EXT4-fs (sda2): recovery complete EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: EXT4-fs (sda3): recovery complete EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: eth0: link is up, 1000 FDX br-lan: port 1(eth0.1) entered blocking state br-lan: port 1(eth0.1) entered disabled state device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.1) entered blocking state br-lan: port 1(eth0.1) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ath: EEPROM regdomain: 0x8348 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a ath: regdomain 0x8348 dynamically updated by user ath: EEPROM regdomain: 0x8348 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a ath: regdomain 0x8348 dynamically updated by user br-lan: port 2(wlan1) entered blocking state br-lan: port 2(wlan1) entered disabled state device wlan1 entered promiscuous mode IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready br-lan: port 2(wlan1) entered blocking state br-lan: port 2(wlan1) entered forwarding state br-lan: port 3(wlan0) entered blocking state br-lan: port 3(wlan0) entered disabled state device wlan0 entered promiscuous mode br-lan: port 3(wlan0) entered blocking state br-lan: port 3(wlan0) entered forwarding state IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready xhci_hcd 0000:45:00.0: firmware failed to load xhci_hcd 0000:45:00.0: Direct firmware load for K2026090.mem failed with error -2 xhci_hcd 0000:45:00.0: Falling back to sysfs fallback for: K2026090.mem xhci_hcd 0000:45:00.0: firmware failed to load xhci_hcd 0000:45:00.0: Unloading driver appfilter version:5.0.1 init oaf sysctl...ok recv user msg oaf msg handle, action = 0 module init.........

coolsnowwolf / lede