Open BenediktMiller opened 5 years ago
Hey,
I am running into some issues using the DER example. I am using the example sketch and right after attempting to create the MQTT Connection the ESP resets.
This is the full serial monitor output:
Connecting to FRITZ!Box Fon WLAN 7360 scandone scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) add 0 aid 2 cnt connected with FRITZ!Box Fon WLAN 7360, channel 6 dhcp client start... ip:192.168.178.85,mask:255.255.255.0,gw:192.168.178.1 . WiFi connected IP address: 192.168.178.85 Current Time: 1562488650 Heap: 39960 Success to open cert file cert loaded Success to open private cert file private key loaded Success to open ca ca loaded Heap: 36368 Attempting MQTT connection... Soft WDT reset >>>stack>>> ctx: cont sp: 3ffffc60 end: 3fffffc0 offset: 01b0 3ffffe10: 3ffeeb34 00003a97 3ffeeb40 40205b7a 3ffffe20: 514d0400 00045454 3ffe85f6 40208c3a 3ffffe30: 00000000 3ffe85f8 00000000 00000001 3ffffe40: 3ffeeb34 3ffeeb34 3ffeed68 402063d8 3ffffe50: 3ffeef30 00000769 00000769 3ffeee94 3ffffe60: 3ffeeb34 3ffeeb34 3ffeed68 40205c04 3ffffe70: 00000000 00000000 00000001 402066cc 3ffffe80: 3ffffebb 3ffeeb34 3ffeed68 402011d9 3ffffe90: 3fff2f24 402172be 3ffffeba 402067bf 3ffffea0: 3fff1ad4 00000000 3ffe882d 40208c3a 3ffffeb0: 3ffeef30 000004a7 000004a7 40209318 3ffffec0: 3ffeebf8 3ffeef0c 3fff1974 40209740 3ffffed0: 00000009 3ffeef0c 3ffeed68 4021727e 3ffffee0: 3ffe882c 00000345 3fff1bcc 40207b6f 3ffffef0: 3ffeebf8 3ffeef0c 3fff1974 4020e7b8 3fffff00: 40206188 000003e8 3fffff68 40201321 3fffff10: 3ffeebf8 3ffeef0c 3ffeed68 4020151b 3fffff20: 4020f480 00000000 000003e8 feefeffe 3fffff30: 3fff280c 3fff2bbc 00000000 00000000 3fffff40: 3ffeef0c 4020f480 00000000 000003e8 3fffff50: feefeffe 3fff24ec 3fff1c44 00000000 3fffff60: 00000000 3ffeef0c 4020f480 00000000 3fffff70: 000003e8 00000000 3ffeebf8 40202cb6 3fffff80: 00000000 00000000 3ffeeb34 4020ebb4 3fffff90: feefeffe 00000000 3ffeee64 4020128a 3fffffa0: 3fffdad0 00000000 3ffeee64 40206ff0 3fffffb0: feefeffe feefeffe 3ffe8514 401004cd <<<stack<<< ets Jan 8 2013,rst cause:2, boot mode:(3,6) load 0x4010f000, len 1384, room 16 tail 8 chksum 0x2d csum 0x2d v8b899c12 ~ld
Could this be the result of a faulty esp8266 or some wrong configuration?
Any help would be greatly appreciated.
Did you solve ? I have exactly same issue.
Me too
I solved, downgrade the pubsubclient's lib version and the esp's version too.
It would be helpful to know what versions you used :-)
Hey,
I am running into some issues using the DER example. I am using the example sketch and right after attempting to create the MQTT Connection the ESP resets.
This is the full serial monitor output:
Could this be the result of a faulty esp8266 or some wrong configuration?
Any help would be greatly appreciated.