Open claustro opened 1 year ago
Yes, you should start the server with prana http-server
command.
Thank you very much for your answer!! . I managed to start the server
I have installed the Prana-RC server on a amrbian device. However I'm getting this error. Any ideea waht's the issue? HTTP server works on my debian machine, but I have other devices that use BT in HA and need to separate this HTTP server.
-> ERROR: [org.freedesktop.DBus.Error.UnknownObject] Method "SetDiscoveryFilter" with signature "a{sv}" on interface "org.bluez.Adapter1" doesn't exist
LE: Might be the fact thet I somehow have an invalid/nonexistent device on hci0?
hci1: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:13 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN
RX bytes:1330 acl:0 sco:0 events:89 errors:0
TX bytes:5503 acl:0 sco:0 commands:89 errors:0
Features: 0xff 0xff 0x8f 0xfe 0xdb 0xff 0x5b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'arm-64'
Class: 0x3c0000
Service Classes: Rendering, Capturing, Object Transfer, Audio
Device Class: Miscellaneous,
HCI Version: 4.0 (0x6) Revision: 0x22bb
LMP Version: 4.0 (0x6) Subversion: 0x22bb
Manufacturer: Cambridge Silicon Radio (10)
hci0: Type: Primary Bus: UART
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:14 acl:0 sco:0 commands:2 errors:0
Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Packet type: DM1 DH1 HV1
Link policy:
Link mode: SLAVE ACCEPT
Thank you very much for your work , Unfortunately I am unable to run the server. I have on the same pc home assistant supervised and prana_rc server installed following the provided instructions. ( pip install prana-rc[server-tornado]) on debian version 11.5 The problem is I can't find or ping the server on http://localhost:8881. I tried also with ip without success. Should I start the server after installation?
Thank you Andrea