search

cp2004 / OctoPrint-WS281x_LED_Status

Add some RGB LEDs to your printer for a quick status update!
https://plugins.octoprint.org/plugins/ws281x_led_status
GNU Affero General Public License v3.0
112 stars 27 forks source link

Question #177

Closed jtannenba closed 2 years ago

jtannenba commented 2 years ago

Describe your problem

Is there a way to tell the led to shut off when the print is done? Did I miss a setting? I only use startup and print. When the Psu control shuts the printer down the light is still on.

Please confirm the following

Log files

No response

cp2004 commented 2 years ago

If you are using PSU control, then you can add @WS_LIGHTSOFF to the gcode scripts to also control the LEDs.

There is an option in this plugin to have the LEDs go off after a certain time, though it is a bit more complicated. You need the 'Success' and 'Idle' effects enabled, and then a number of seconds for 'Return to idle' and 'idle timeout'.

jtannenba commented 2 years ago

Thank you. What I did was run the external 5 v from the neopixels to the plug controlled by the PSU. I don't know why dum dum didn't think of that before. :-)