Closed climatec closed 3 years ago
See #63 and #64 for an explanation. GPIO pin 10 is the only pin that works without root, the rest you need to run OctoPrint as root to enable. This is not a limitation set by me, but by the hardware of the raspberry pi. Please note that choosing a pin other than GPIO 10 is not officially supported by me, due to the security issues of running a webserver as root. If you know what you are doing, it is possible.
Hi thanks for replying so fast.
But as you can understand I can’t install the screen any different. 😢
So I have to abandon the idea. Unfortunately else it was a great idea.
Thanks.
Regards
Henrik
fre. 8. jan. 2021 kl. 13.32 skrev Charlie Powell notifications@github.com:
See #63 https://github.com/cp2004/OctoPrint-WS281x_LED_Status/issues/63 for an explanation. GPIO pin 10 is the only pin that works without root, the rest you need to run OctoPrint as root to enable. This is not a limitation set by me, but by the hardware of the raspberry pi. Please note that choosing a pin other than GPIO 10 is not officially supported by me, due to the security issues of running a webserver as root. If you know what you are doing, it is possible.
— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/cp2004/OctoPrint-WS281x_LED_Status/issues/76#issuecomment-756732089, or unsubscribe https://github.com/notifications/unsubscribe-auth/API77WEMRKZFBRKFWNKX5WTSY33MVANCNFSM4V2L4XZQ .
Hi very nice add-on you have made.
but you say it not possible to have from gpio 10? in the program its possible.
the problem is some of us is using a display that use first part of the gpio´s pin 1 to 28.
any solution on that problem.
best regards
Henrik