Loading persistent filesystem... OK. File system usage: 12/320KB.
Now opening JSON config file '/config.json'
JSON file mem usage: 1790 / 4096
Now dumping JSON file content:
{"wifi":{"client_enabled":true,"client_dhcp_enabled":true,"client_ssid":"palsbo","client_password":"xxxxx","client_ip":"192.168.0.200","client_mask":"255.255.255.0","client_gateway":"192.168.0.1","client_dns":"192.168.0.1","client_hostname":"RFLink32","ap_enabled":true,"ap_ssid":"RFLink-AP","ap_password":"","ap_ip":"192.168.4.1","ap_network":"192.168.4.0","ap_mask":"255.255.255.0"},"mqtt":{"enabled":true,"server":"192.168.1.2","port":1883,"id":"RFLink32","user":"","password":"","topic_in":"ESP00/cmd","topic_out":"ESP00/msg","lwt_enabled":true,"topic_lwt":"ESP00/lwt","ssl_enabled":false,"ssl_insecure":true,"ca_cert":""},"serial2net":{"enabled":false,"port":1900},"portal":{"enabled":true,"auth_enabled":true,"auth_user":"rflink32","auth_password":"433mhz"},"signal":{"async_mode_enabled":true,"sample_rate":1,"min_raw_pulses":24,"seek_timeout":25,"min_preamble":100,"min_pulse_len":90,"signal_end_timeout":5000,"signal_repeat_time":250,"scan_high_time":50},"radio":{"hardware":"SX1276","rx_data":26,"rx_vcc":-1,"rx_nmos":-1,"rx_pmos":-1,"rx_gnd":-1,"rx_na":-1,"rx_reset":23,"rx_cs":18,"tx_data":2,"tx_vcc":-1,"tx_nmos":-1,"tx_pmos":-1,"tx_gnd":-1}}
Now trying to initialize hardware 'SX1276'
Initialized SX1276(freq=433.92Mhz,br=9.600kbps,rxbw=250.0khz)=0
SX1276 setOOK=0
SX1276 set encoding result=0
SX1276 set data shaping result=0
SX1276 setOokThresholdType(2)=0
SX1276 setOokFixedThreshold(0x0C)=0
SX1276 setOokPeakThresholdDecrement() result=0
SX1276 disableBitSync() result=0
SX1276 setGain() result=0
Hardware initialization was successful!
Applied slicer 'Legacy'
Signal parameters have changed.
* WIFI AP starting with SSID 'RFLink-AP' and band=10... OK
Trying to connect WIFI SSID palsbo. A status will be given whenever it occurs.
Radio pin RF_RX_DATA : 26
Radio pin RF_RX_CS : 18
Radio pin RF_RX_RESET : 23
Radio pin RF_TX_DATA : 2
Connected to AP SSID:palsbo BSSID: BC:DF:58:F1:EF:9B Channel: 1 Auth mode: 3
Starting WebServer... OK
WiFi Client has received a new IP: 192.168.1.20
MQTT parameters have changed, first disconnecting...
MQTT parameters have changed, now applying...
Trying to connect to MQTT Server '192.168.1.2' ... Established
MQTT ID : RFLink32
MQTT Username :
NTP synchronized: 2024-03-21 06:30:04
I also cannot get the oled display to work. Tried to add it to the platformio.ini like this:
I try to get this working wilt the LILYGO Lora board, but without success. The board uses SX1276 on following pins:
I added the board profile to platformio.ini as such:
[env:ttgo-lora32-v21] extends = env:genericESP32 board = ttgo-lora32-v21 build_flags = -D RFLink_default_Radio_HardwareType=HardwareType::HW_SX1276_t -D RFLINK_WIFI_ENABLEDThe result when loading looks like this:
Loading persistent filesystem... OK. File system usage: 12/320KB. Now opening JSON config file '/config.json' JSON file mem usage: 1790 / 4096 Now dumping JSON file content: {"wifi":{"client_enabled":true,"client_dhcp_enabled":true,"client_ssid":"palsbo","client_password":"xxxxx","client_ip":"192.168.0.200","client_mask":"255.255.255.0","client_gateway":"192.168.0.1","client_dns":"192.168.0.1","client_hostname":"RFLink32","ap_enabled":true,"ap_ssid":"RFLink-AP","ap_password":"","ap_ip":"192.168.4.1","ap_network":"192.168.4.0","ap_mask":"255.255.255.0"},"mqtt":{"enabled":true,"server":"192.168.1.2","port":1883,"id":"RFLink32","user":"","password":"","topic_in":"ESP00/cmd","topic_out":"ESP00/msg","lwt_enabled":true,"topic_lwt":"ESP00/lwt","ssl_enabled":false,"ssl_insecure":true,"ca_cert":""},"serial2net":{"enabled":false,"port":1900},"portal":{"enabled":true,"auth_enabled":true,"auth_user":"rflink32","auth_password":"433mhz"},"signal":{"async_mode_enabled":true,"sample_rate":1,"min_raw_pulses":24,"seek_timeout":25,"min_preamble":100,"min_pulse_len":90,"signal_end_timeout":5000,"signal_repeat_time":250,"scan_high_time":50},"radio":{"hardware":"SX1276","rx_data":26,"rx_vcc":-1,"rx_nmos":-1,"rx_pmos":-1,"rx_gnd":-1,"rx_na":-1,"rx_reset":23,"rx_cs":18,"tx_data":2,"tx_vcc":-1,"tx_nmos":-1,"tx_pmos":-1,"tx_gnd":-1}} Now trying to initialize hardware 'SX1276' Initialized SX1276(freq=433.92Mhz,br=9.600kbps,rxbw=250.0khz)=0 SX1276 setOOK=0 SX1276 set encoding result=0 SX1276 set data shaping result=0 SX1276 setOokThresholdType(2)=0 SX1276 setOokFixedThreshold(0x0C)=0 SX1276 setOokPeakThresholdDecrement() result=0 SX1276 disableBitSync() result=0 SX1276 setGain() result=0 Hardware initialization was successful! Applied slicer 'Legacy' Signal parameters have changed. * WIFI AP starting with SSID 'RFLink-AP' and band=10... OK Trying to connect WIFI SSID palsbo. A status will be given whenever it occurs. Radio pin RF_RX_DATA : 26 Radio pin RF_RX_CS : 18 Radio pin RF_RX_RESET : 23 Radio pin RF_TX_DATA : 2 Connected to AP SSID:palsbo BSSID: BC:DF:58:F1:EF:9B Channel: 1 Auth mode: 3 Starting WebServer... OK WiFi Client has received a new IP: 192.168.1.20 MQTT parameters have changed, first disconnecting... MQTT parameters have changed, now applying... Trying to connect to MQTT Server '192.168.1.2' ... Established MQTT ID : RFLink32 MQTT Username : NTP synchronized: 2024-03-21 06:30:04I also cannot get the oled display to work. Tried to add it to the platformio.ini like this:
[env:ttgo-lora32-v21] extends = env:genericESP32 board = ttgo-lora32-v21 build_flags = -D RFLink_default_Radio_HardwareType=HardwareType::HW_SX1276_t -D RFLINK_WIFI_ENABLED -D OLED_ENABLEDbut no luck! The board has OLED on the following pins:
Any advice is apreciated. Regards Erik