search

cprezzi / grbl-LPC

Multiple compiled versions for different boards & machines (under releases)
Other
56 stars 39 forks source link

Booting mks sbase v1.3 #20

Closed nicooler closed 5 years ago

nicooler commented 5 years ago

Hi there,

I tried starting using the mks_sbase_p1_23_firmware.bin but it seems to not boot.# Then I tried a view other fimwares and in grbl-LPC all of them arent working anymore. Even build it myself, still not working and I know it was working before. I tested 2 Boards now, but no luck. When connecting with Laserweb this happens:

Screenshot 2019-04-19 at 00 33 57

I tried the smoothieware master firmware and that one seems to work. I can connect with the mks base.

Do you have any idea?

Thanks Nico

pmth commented 5 years ago

I am getting no supported firmware detectedl. Tried to add RESET_ON_CONNECT=1 to plist.info (I am using mac) as well. The firmware seems to be installed, I noticed firmware.cur. Not sure if anyone can help, I am using this board: https://www.amazon.com/BIQU-Smoothieboard-Controller-Source-Smoothieware-MKS-Upgraded/dp/B07PQ7LXK8/ref=sr_1_2?keywords=MKS+SGEN&qid=1560661489&s=industrial&sr=1-2

cprezzi commented 5 years ago

Please go to https://forum.makerforums.info/c/laserweb-cncweb for community support.

Nonstopich commented 5 years ago

I am getting no supported firmware detectedl. Tried to add RESET_ON_CONNECT=1 to plist.info (I am using mac) as well. The firmware seems to be installed, I noticed firmware.cur. Not sure if anyone can help, I am using this board: https://www.amazon.com/BIQU-Smoothieboard-Controller-Source-Smoothieware-MKS-Upgraded/dp/B07PQ7LXK8/ref=sr_1_2?keywords=MKS+SGEN&qid=1560661489&s=industrial&sr=1-2

Hello,

I have same problem. The same board. Did you resolve it?

theomajigga commented 5 years ago

Your accel/motion rates are too high and the machine is stalling causing a reset, is one of my guesses.

I use the board with no issues. Please try to do it with no steppers connected and see if you send move commands.

cprezzi commented 5 years ago

@theomajigga I think you are wrong. This has nothing to do with firmware settings.

@Nonstopich The SBASE firmware doe not work on the SGen board, because there is no I2C stepper current chip on the SGen! You would need to compile your own version with separate settings for SGen.

theomajigga commented 5 years ago

Misread it.

On Tue, Jul 23, 2019, 09:56 Claudio Prezzi notifications@github.com wrote:

@theomajigga https://github.com/theomajigga I think you are wrong. This has nothing to do with firmware settings.

@Nonstopich https://github.com/Nonstopich The SBASE firmware doe not work on the SGen board, because there is no I2C stepper current chip on the SGen! You would need to compile your own version with separate settings for SGen.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/cprezzi/grbl-LPC/issues/20?email_source=notifications&email_token=ACPRJBU6TCGAJTFGGJKNDGLQA4L23A5CNFSM4HHA3XC2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2TMT3Q#issuecomment-514247150, or mute the thread https://github.com/notifications/unsubscribe-auth/ACPRJBX7WC3TJRCYL4A5PGTQA4L23ANCNFSM4HHA3XCQ .