search

cprezzi / grbl-LPC

Multiple compiled versions for different boards & machines (under releases)
Other
56 stars 39 forks source link

firmware.bin #58

Closed Deltaplc closed 3 years ago

Deltaplc commented 3 years ago

Good morning Sorry I am not very familiar with bin files because I have never had the need to create it. I play a little with arduino. If I were to reconfigure grbl, for example by changing something on config.h ...... then how do I regenerate the firmware.bin file with the changes I made? I would like to modify a k40 laser and use an MKS SBase:

https://www.amazon.it/3Dman-Controller-Compatible-Ramps1-4-Mega2560/dp/B07VRF4R3G/ref=pd_rhf_dp_p_img_4?_encoding=UTF8&refRID=HZQAS5HW3KKM6909MJ6E&th=1

Can it fit?? Grazie Davide

cprezzi commented 3 years ago

Please follow the Build Notes in README.md for compiling the bin file. Hint: In grbl, most settings can be done with $ settings on runtime.

The board of your link (MKS Sgen) is not compatible with grblLPC. Only MKS SBase is.

Deltaplc commented 3 years ago

Grazie per la risposta. Ti chiedo gentilmente se potresti mandarmi un link di esempio per quale MKS SBase può essere compatibile con grbl? Non vorrei comprare una scheda che non sia compatibile...... Questa può andare bene? https://www.ebay.it/itm/363238430561?hash=item5492b29761:g:hJkAAOSw~kFf6wDU Saluti Davide

cprezzi commented 3 years ago

Sorry, my italian is very bad. The link you posted is the correct board.

Deltaplc commented 3 years ago

Thank you so much for your support and availability !! Greetings Davide