Working area of screen turn grey after creating new tool

[reneas]

Describe the bug when changing to the Manufacture tab and creating a new tool the screen turns grey after swapping back to the Design tab.

To Reproduce Steps to reproduce the behavior:

1. Open Fusion 360
2. Swap to Manufacture tab
3. Create new tool
4. Swap back to Design tab
5. Screen turns grey (see video)

Expected behavior

1. Open Fusion 360
2. Swap to Manufacture tab
3. Create new tool
4. Swap back to Design tab
5. Screen stays normal

Video

https://github.com/cryinkfly/Autodesk-Fusion-360-for-Linux/assets/28440614/d35b7f33-8f6c-497b-a0ec-65df7f2701af

Desktop (please complete the following information):

• Version number of Autodesk Fusion 360: 2.0.18460 x86_64
• Graphics card model + Graphics card driver:

  sudo lshw -c video
  *-display                 
     description: VGA compatible controller
     product: CometLake-U GT2 [UHD Graphics]
     vendor: Intel Corporation
     physical id: 2
     bus info: pci@0000:00:02.0
     logical name: /dev/fb0
     version: 02
     width: 64 bits
     clock: 33MHz
     capabilities: pciexpress msi pm vga_controller bus_master cap_list rom fb
     configuration: depth=32 driver=i915 latency=0 resolution=1920,1080
     resources: irq:136 memory:80000000-80ffffff memory:60000000-7fffffff ioport:3000(size=64) memory:c0000-dffff

• Operating system: Kubuntu 22.04
• Desktop environment: KDE
• OpenGL-Mode

[nordstream3]

Same problem here...