No LaCrosse Events in OpenHAB 2

[HAF-Blade]

Hi,

I've tried to install the addon in OpenHAB 2. The Jeelink USB Receiver is shown in the things as online but I don't get any event receive messages in the log.

I've tried to follow the instructions here: https://github.com/csowada/openhab-bindings/wiki/LaCrosse-Binding

The problem is that I'm fairly new to the topic and I've tried to add the line lacrosse:port=/dev/ttyUSB0 to /etc/openhab2/openhab.cfg and to /etc/openhab2/services/openhab.cfg . Furthermore I've activated the "Legacy 1.x bindings" in the web gui.

Nothing happens. I also tried to add my LaCrosse temperature hardware manually but I don't have the needed IDs for the sensors.

I'm sure that I miss something. Is it possible to use the Jeelink binding at all in openhab2?

Oh by the way, I already used the hardware with FHEM where it worked.

Best regards, Daniel

[csowada]

Sorry, but this binding is not compatible with OH2. I will not change this, but you are free to fork this repository. But I've seen a new binding on the OH community. I think that is the way to go.

https://community.openhab.org/t/new-jeelink-openhab2-binding/15018/13

[binbashblog]

No problem. Stopped using it a long time ago!

For info, ebusd on github, great solution.

Get Outlook for Androidhttps://aka.ms/ghei36

On Thu, Jul 13, 2017 at 11:13 AM +0100, "csowada" notifications@github.com<mailto:notifications@github.com> wrote:

Sorry, but this binding is not compatible with OH2. I will not change this, but you are free to fork this repository. But I've seen a new binding on the OH community. I think that is the way to go.

https://community.openhab.org/t/new-jeelink-openhab2-binding/15018/13

- You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/csowada/openhab-bindings/issues/10#issuecomment-315035954, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ALvb5xiLI-KLIdMYfsgG2rLN55iyIBi5ks5sNe3dgaJpZM4OSC1G.

[HAF-Blade]

Hi thanks for your answer. I appreciate this a lot. I will have a look at the linked addon. Thank you. :)

[binbashblog]

You may be interested in this! You’ll notice I have contributed in the forum:

https://forum.pimatic.org/topic/1160/how-to-control-vaillant-heating

It’s based off ebusd, great solution with a Raspberry Pi, this is what I use.

From: HAF-Blade [mailto:notifications@github.com] Sent: 13 July 2017 17:12 To: csowada/openhab-bindings openhab-bindings@noreply.github.com Cc: Harpinder Sanghera Harpinder@sanghera.me.uk; Comment comment@noreply.github.com Subject: Re: [csowada/openhab-bindings] No LaCrosse Events in OpenHAB 2 (#10)

Hi thanks for your answer. I appreciate this a lot. I will have a look at the linked addon. Thank you. :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/csowada/openhab-bindings/issues/10#issuecomment-315126241, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ALvb50aVXq7HNsUQDSDsMtjETUFGMpz4ks5sNkHXgaJpZM4OSC1G.

[csowada]

My answer was only releated to the LaCrosse binding, the ebus binding is still maintained. But I'm working on a native OH2 version since a couple of months. I hope I can release a first version in 2-3 months.