I'm trying to get OTA running with VSC but without success so far.
I've tried 0.1.8 and also current master (as https://github.com/merlinschumacher/Basecamp/issues/52 seems to have found a fix for the problem).
Unfortunately it doesn't work for me. The IP address is correct. Here's the code:
I'm trying to get OTA running with VSC but without success so far. I've tried 0.1.8 and also current master (as https://github.com/merlinschumacher/Basecamp/issues/52 seems to have found a fix for the problem). Unfortunately it doesn't work for me. The IP address is correct. Here's the code:
`#include
include
Basecamp iot{ Basecamp:: SetupModeWifiEncryption:: secured };
void setup() { iot.configuration.set("OTAPassword", "qwe"); iot.configuration.set("OTAActive", "true"); iot.begin(); }
void loop() { // put your main code here, to run repeatedly: }`
PlatformIO.ini: `[env:esp-wrover-kit] platform = espressif32 board = esp-wrover-kit framework = arduino
lib_deps = ArduinoJson@<6.0
monitor_speed = 115200
upload_protocol = espota upload_port = 192.168.0.39`
and the output from esptool:
Checking size .pioenvs/esp-wrover-kit/firmware.elf Memory Usage -> http://bit.ly/pio-memory-usage DATA: [= ] 14.2% (used 46368 bytes from 327680 bytes) PROGRAM: [======== ] 79.3% (used 1038776 bytes from 1310720 bytes) esptool.py v2.6 Configuring upload protocol... AVAILABLE: esp-prog, espota, esptool, ftdi, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa CURRENT: upload_protocol = espota Uploading .pioenvs/esp-wrover-kit/firmware.bin 17:17:06 [DEBUG]: Options: {'timeout': 10, 'esp_ip': '192.168.0.39', 'host_port': 16367, 'image': '.pioenvs/esp-wrover-kit/firmware.bin', 'host_ip': '0.0.0.0', 'auth': '', 'esp_port': 8266, 'spiffs': False, 'debug': True, 'progress': True} 17:17:06 [INFO]: Starting on 0.0.0.0:16367 17:17:06 [INFO]: Upload size: 1038896 Sending invitation to 192.168.0.39 .......... 17:18:46 [ERROR]: No response from the ESP *** [upload] Error 1
Can someone help me? Thanks!