search

cubieplayer / Cubian

Debian for Cubieboard
http://cubian.org
270 stars 49 forks source link

Kernel LVM support #225

Closed Mimoza closed 9 years ago

Mimoza commented 10 years ago

Hi ! I'm trying to move my rootfs on hdd and it's appear the Kernel isn't build with LVM support. Can be integrated for the next release ?

Maybe it will be better if you can make a wiki page / manuel for build is own kernel for Cubian. I've seen your Toolchain repository, but some help will be welcome

cubieplayer commented 10 years ago

Okay, I will add LVM support by default in the next release.

cubieplayer commented 10 years ago

I checked the config already have LVM support.

Mimoza commented 10 years ago

Well, during boot it's not possible to mount the "/", "/usr" or "/var" on LVM partition. After it's ok, i mount some personnals directories and it's work. I can show you some log to understand the problem.

cubieplayer commented 10 years ago

That would be helpful with the log

Mimoza commented 10 years ago

Sorry for the delay. Here my "fstab"

#<file system>      <mount point>   <type>  <options>   <dump>  <pass>
/dev/mmcblk0p1      /       ext4    defaults    0   1
#tmpfs          /tmp        tmpfs   defaults    0   0
#tmpfs          /var/tmp    tmpfs   defaults    0   0

#/dev/sda1      /boot       ext3    defaults    0   2
#/dev/vg_XXX/lv_racine  /       ext4    errors=remount-ro   0   1

/dev/vg_XXX/lv_home /home       ext4    defaults    0   2
/dev/vg_XXX/lv_usr  /usr        ext4    defaults    0   2
/dev/vg_XXX/lv_var  /var        ext4    defaults    0   2

/dev/sda2       none        swap    sw      0   0
/dev/vg_XXX/lv_tmp  /tmp        ext4    defaults    0   2
tmpfs           /run        tmpfs   defaults    0   0

/dev/vg_XXX/lv_srv  /srv        ext4    defaults    0   2
/dev/vg_XXX/lv_archives /archives   ext4    defaults    0   2
#/dev/vg_XXX/lv_coffre  /coffre     btrfs   defaults    0   2

Here a full trace of boot and login

U-Boot SPL 2013.10-rc2-08397-gf39986a (Oct 22 2013 - 04:35:53)
Board: Cubieboard2
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600

U-Boot 2013.10-rc2-08397-gf39986a (Oct 22 2013 - 04:35:53) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   emac
Hit any key to stop autoboot:  0
** Unrecognized filesystem type **
405 bytes read in 7 ms (55.7 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
50512 bytes read in 10 ms (4.8 MiB/s)
5480656 bytes read in 249 ms (21 MiB/s)
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.4.67+
   Created:      2013-11-06   0:31:35 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5480592 Bytes = 5.2 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK

Starting kernel ...

<6>Booting Linux on physical CPU 0
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 3.4.67+ (root@ubtu) (gcc version 4.8.2 20130603 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.06 - Linaro GCC 2013.06) ) #4 SMP PREEMPT Wed Nov 6 08:31:09 CST 2013
CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: sun7i
<6>Memory Reserved:
<6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
<6>     LCD  : 0x44000000 - 0x45ffffff  (  32 MB)
Memory policy: ECC disabled, Data cache writealloc
<6>sunxi: Allwinner A20 (AW1651/sun7i) detected.
<7>On node 0 totalpages: 262144
<7>free_area_init_node: node 0, pgdat c0a5fd00, node_mem_map d0000000
<7>  DMA zone: 512 pages used for memmap
<7>  DMA zone: 0 pages reserved
<7>  DMA zone: 65024 pages, LIFO batch:15
<7>  Normal zone: 1008 pages used for memmap
<7>  Normal zone: 128016 pages, LIFO batch:31
<7>  HighMem zone: 528 pages used for memmap
<7>  HighMem zone: 67056 pages, LIFO batch:15
<6>PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
<7>pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096<c>
<7>pcpu-alloc: <c>[0] <c>0 <c>[0] <c>1 <c>
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
<5>Kernel command line: console=tty0 console=ttyS0,115200 sunxi_no_mali_mem_reserve sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x800p60 root=/dev/mmcblk0p1 rootwait panic=10 consoleblank=0
<6>PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>allocated 2097152 bytes of page_cgroup
<6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>Memory: 1024MB = 1024MB total
<5>Memory: 992000k/992000k available, 56576k reserved, 270336K highmem
<5>Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc09ae454   (9882 kB)
      .init : 0xc09af000 - 0xc09ebdc0   ( 244 kB)
      .data : 0xc09ec000 - 0xc0a68370   ( 497 kB)
       .bss : 0xc0a68394 - 0xc0c50308   (1952 kB)
<6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>Preemptible hierarchical RCU implementation.
<6>     RCU dyntick-idle grace-period acceleration is enabled.
<6>NR_IRQS:192
<6>Architected local timer running at 24.00MHz.
<6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<2>start_kernel(): bug: interrupts were enabled early
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>1908.73 BogoMIPS (lpj=9543680)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>Initializing cgroup subsys blkio
<6>Initializing cgroup subsys perf_event
<6>CPU: Testing write buffer coherency: ok
<6>CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
<6>Setting up static identity map for 0x406e2ef8 - 0x406e2f50
CPU1: Booted secondary processor
<6>CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (3824.02 BogoMIPS).
<6>devtmpfs: initialized
<6>xor: measuring software checksum speed
<6>   arm4regs  :  1332.000 MB/sec
<6>   8regs     :   705.600 MB/sec
<6>   32regs    :   798.000 MB/sec
<6>xor: using function: arm4regs (1332.000 MB/sec)
<6>dummy:
<6>NET: Registered protocol family 16
<6>hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[ccu-inf] aw clock manager init
<6>[ccu-inf] aw_ccu_init
<6>[ccu-inf] script config pll3 to 297MHz
<6>[ccu-inf] script config pll4 to 960MHz
<6>[ccu-inf] script config pll6 to 600MHz
<6>[ccu-inf] script config pll7 to 297MHz
<6>[ccu-inf] script config pll8 to 336MHz
<6>Init eGon pin module V2.0
<6>bio: create slab <bio-0> at 0
raid6: int32x1    150 MB/s
raid6: int32x2    189 MB/s
raid6: int32x4    208 MB/s
raid6: int32x8    196 MB/s
raid6: using algorithm int32x4 (208 MB/s)
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>Linux video capture interface: v2.00
<6>Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>cfg80211: Calling CRDA to update world regulatory domain
<6>Switching to clocksource arch_sys_counter
<5>FS-Cache: Loaded
<6>CacheFiles: Loaded
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP: reno registered
<6>UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>NET: Registered protocol family 1
<6>RPC: Registered named UNIX socket transport module.
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1.320:1): initialized
highmem bounce pool size: 64 pages
<5>VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<5>NFS: Registering the id_resolver key type
<6>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>NTFS driver 2.1.30 [Flags: R/W].
<6>fuse init (API version 7.18)
<6>OCFS2 1.5.0
<6>ocfs2: Registered cluster interface o2cb
<6>OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
<6>OCFS2 Node Manager 1.5.0
<6>OCFS2 DLM 1.5.0
<6>msgmni has been set to 1409
<3>alg: comp: Compression test 1 failed for lzo-generic: output len = 57
<6>alg: No test for stdrng (krng)
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>sunxi disp driver loaded (/dev/disp api 1.0)
<6>Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
<6>[uart]: used uart info.: 0x01
<6>[uart]: serial probe 0 irq 33 mapbase 0x01c28000
<6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.67+ (root@ubtu) (gcc version 4.8.2 20130603 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.06 - Linaro GCC 2013.06) ) #4 SMP PREEMPT Wed Nov 6 08:31:09 CST 2013
[    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun7i
[    0.000000] Memory Reserved:
[    0.000000]  SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
[    0.000000]  LCD  : 0x44000000 - 0x45ffffff  (  32 MB)
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
[    0.000000] PERCPU: Embedded 7 pages/cpu @d0808000 s7616 r8192 d12864 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260096
[    0.000000] Kernel command line: console=tty0 console=ttyS0,115200 sunxi_no_mali_mem_reserve sunxi_g2d_mem_reserve=0 sunxi_ve_mem_reserve=0 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x800p60 root=/dev/mmcblk0p1 rootwait panic=10 consoleblank=0
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 992000k/992000k available, 56576k reserved, 270336K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc09ae454   (9882 kB)
[    0.000000]       .init : 0xc09af000 - 0xc09ebdc0   ( 244 kB)
[    0.000000]       .data : 0xc09ec000 - 0xc0a68370   ( 497 kB)
[    0.000000]        .bss : 0xc0a68394 - 0xc0c50308   (1952 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:192
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] start_kernel(): bug: interrupts were enabled early
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.013755] Calibrating delay loop... 1908.73 BogoMIPS (lpj=9543680)
[    0.075989] pid_max: default: 32768 minimum: 301
[    0.079676] Mount-cache hash table entries: 512
[    0.083954] Initializing cgroup subsys cpuacct
[    0.087289] Initializing cgroup subsys memory
[    0.090712] Initializing cgroup subsys devices
[    0.094156] Initializing cgroup subsys freezer
[    0.097390] Initializing cgroup subsys blkio
[    0.101077] Initializing cgroup subsys perf_event
[    0.104665] CPU: Testing write buffer coherency: ok
[    0.109863] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.116978] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
[    0.122531] Setting up static identity map for 0x406e2ef8 - 0x406e2f50
[    0.238291] CPU1: Booted secondary processor
[    0.297409] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.299412] Brought up 2 CPUs
[    0.304757] SMP: Total of 2 processors activated (3824.02 BogoMIPS).
[    0.307914] devtmpfs: initialized
[    0.316015] xor: measuring software checksum speed
[    0.369251]    arm4regs  :  1332.000 MB/sec
[    0.419281]    8regs     :   705.600 MB/sec
[    0.469306]    32regs    :   798.000 MB/sec
[    0.473839] xor: using function: arm4regs (1332.000 MB/sec)
[    0.475216] dummy:
[    0.478888] NET: Registered protocol family 16
[    0.486908] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.491730] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.494923] [ccu-inf] aw clock manager init
[    0.497204] [ccu-inf] aw_ccu_init
[    0.501168] [ccu-inf] script config pll3 to 297MHz
[    0.504931] [ccu-inf] script config pll4 to 960MHz
[    0.508707] [ccu-inf] script config pll6 to 600MHz
[    0.512466] [ccu-inf] script config pll7 to 297MHz
[    0.516221] [ccu-inf] script config pll8 to 336MHz
[    0.518982] Init eGon pin module V2.0
[    0.528333] bio: create slab <bio-0> at 0
[    0.701121] raid6: int32x1    150 MB/s
[    0.871322] raid6: int32x2    189 MB/s
[    1.041254] raid6: int32x4    208 MB/s
[    1.211442] raid6: int32x8    196 MB/s
[    1.215195] raid6: using algorithm int32x4 (208 MB/s)
[    1.218346] SCSI subsystem initialized
[    1.226054] usbcore: registered new interface driver usbfs
[    1.230406] usbcore: registered new interface driver hub
[    1.234547] usbcore: registered new device driver usb
[    1.238355] Linux video capture interface: v2.00
[    1.244073] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    1.250270] cfg80211: Calling CRDA to update world regulatory domain
[    1.254906] Switching to clocksource arch_sys_counter
[    1.257064] FS-Cache: Loaded
[    1.259247] CacheFiles: Loaded
[    1.271191] NET: Registered protocol family 2
[    1.277586] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.284578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.292194] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    1.298821] TCP: Hash tables configured (established 131072 bind 65536)
[    1.301037] TCP: reno registered
[    1.305922] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.311283] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.314909] NET: Registered protocol family 1
[    1.320234] RPC: Registered named UNIX socket transport module.
[    1.323915] RPC: Registered udp transport module.
[    1.327580] RPC: Registered tcp transport module.
[    1.333018] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.338623] audit: initializing netlink socket (disabled)
[    1.342403] type=2000 audit(1.320:1): initialized
[    1.346660] highmem bounce pool size: 64 pages
[    1.358164] VFS: Disk quotas dquot_6.5.2
[    1.363642] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.370602] NFS: Registering the id_resolver key type
[    1.376998] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.380886] NTFS driver 2.1.30 [Flags: R/W].
[    1.384196] fuse init (API version 7.18)
[    1.386234] OCFS2 1.5.0
[    1.390703] ocfs2: Registered cluster interface o2cb
[    1.392649] OCFS2 DLMFS 1.5.0
[    1.396405] OCFS2 User DLM kernel interface loaded
[    1.398983] OCFS2 Node Manager 1.5.0
[    1.401202] OCFS2 DLM 1.5.0
[    1.404133] msgmni has been set to 1409
[    1.414517] alg: comp: Compression test 1 failed for lzo-generic: output len = 57
[    1.417740] alg: No test for stdrng (krng)
[    1.424484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.427397] io scheduler noop registered
[    1.430665] io scheduler deadline registered
[    1.434363] io scheduler cfq registered (default)
[    1.439169] sunxi disp driver loaded (/dev/disp api 1.0)
[    1.444731] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.449202] [uart]: used uart info.: 0x01
[    1.453915] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
[    1.480139] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
<6>console [ttyS0] enabled
[    2.187760] console [ttyS0] enabled
<7>G2D: drv_g2d_init
<6>G2D: Module initialized.major:251
[    2.197177] G2D: Module initialized.major:251
<6>brd: module loaded
[    2.204546] brd: module loaded
<6>loop: module loaded
[    2.213294] loop: module loaded
[NAND] nand driver version: 0x2 0x9
[    2.219838] [NAND] nand driver version: 0x2 0x9
<4>Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
[    2.274461] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
<4>Dev Sunxi softw311 nand magic does not match for MBR 2:
[    2.287551] Dev Sunxi softw311 nand magic does not match for MBR 2:
<4>Dev Sunxi softw311 nand magic does not match for MBR 3:
[    2.300613] Dev Sunxi softw311 nand magic does not match for MBR 3:
<4>Dev Sunxi softw311 nand magic does not match for MBR 4:
[    2.313673] Dev Sunxi softw311 nand magic does not match for MBR 4:
<4>Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
[    2.328460] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
<4>Dev Sunxi softw411 nand: part 1, start 32768, size 2048
[    2.346742] Dev Sunxi softw411 nand: part 1, start 32768, size 2048
<4>Dev Sunxi softw411 nand: part 2, start 34816, size 512
[    2.358194] Dev Sunxi softw411 nand: part 2, start 34816, size 512
<4>Dev Sunxi softw411 nand: part 3, start 35328, size 7943680
[    2.369864] Dev Sunxi softw411 nand: part 3, start 35328, size 7943680
<6> nand: nanda nandb nandc
[    2.378930]  nand: nanda nandb nandc
[NAND]nand driver, ok.
[    2.385551] [NAND]nand driver, ok.
<6>sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
[    2.395402] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP
<4>sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
[    2.406669] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1
<6>sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.419428] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
<6>sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
[    2.434333] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc
<6>scsi0 : sw_ahci_platform
[    2.445091] scsi0 : sw_ahci_platform
<6>ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
[    2.455858] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
<6>sunxi_emac Using mii phy on PortA
[    2.467330] sunxi_emac Using mii phy on PortA
<6>sunxi_emac Using MAC from SID: 02:90:06:41:21:c2[    2.486421] sunxi_emac Using MAC from SID: 02:90:06:41:21:c2<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[    2.499350] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.511287] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[sw-ehci1]: open clock
[    2.519854] [sw-ehci1]: open clock
[sw-ehci1]: Set USB Power ON
[    2.545878] [sw-ehci1]: Set USB Power ON
<6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.556245] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
[    2.569770] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
<6>sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
[    2.581195] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000
<6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
[    2.609389] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
<6>hub 1-0:1.0: USB hub found
[    2.618167] hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
[    2.624815] hub 1-0:1.0: 1 port detected
[sw-ohci1]: open clock
[    2.631363] [sw-ohci1]: open clock
<6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.660873] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
[    2.674044] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
[    2.685388] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400
<6>hub 2-0:1.0: USB hub found
[    2.752272] hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
[    2.758958] hub 2-0:1.0: 1 port detected
[sw-ehci2]: open clock
[    2.765424] [sw-ehci2]: open clock
[sw-ehci2]: Set USB Power ON
[    2.791460] [sw-ehci2]: Set USB Power ON
<6>sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.801829] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
[    2.815336] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
<6>sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
[    2.826744] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000
<6>sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
[    2.849374] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
<6>hub 3-0:1.0: USB hub found
[    2.858109] hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 1 port detected
[    2.864751] hub 3-0:1.0: 1 port detected
[sw-ohci2]: open clock
[    2.871245] [sw-ohci2]: open clock
<6>sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[    2.900743] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
[    2.913910] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
<6>sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
[    2.925261] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400
<6>hub 4-0:1.0: USB hub found
[    2.992267] hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 1 port detected
[    2.998939] hub 4-0:1.0: 1 port detected
<6>Initializing USB Mass Storage driver...
[    3.007037] Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
[    3.017048] usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
[    3.026646] USB Mass Storage support registered.
<6>usbcore: registered new interface driver ums-alauda
[    3.036203] usbcore: registered new interface driver ums-alauda
<6>usbcore: registered new interface driver ums-cypress
[    3.047145] usbcore: registered new interface driver ums-cypress
<6>usbcore: registered new interface driver ums-datafab
[    3.058157] usbcore: registered new interface driver ums-datafab
<6>usbcore: registered new interface driver ums_eneub6250
[    3.069484] usbcore: registered new interface driver ums_eneub6250
<6>usbcore: registered new interface driver ums-freecom
[    3.080687] usbcore: registered new interface driver ums-freecom
<6>usbcore: registered new interface driver ums-isd200
[    3.091632] usbcore: registered new interface driver ums-isd200
<6>usbcore: registered new interface driver ums-jumpshot
[    3.102717] usbcore: registered new interface driver ums-jumpshot
<6>usbcore: registered new interface driver ums-karma
[    3.113654] usbcore: registered new interface driver ums-karma
<6>usbcore: registered new interface driver ums-onetouch
[    3.124582] usbcore: registered new interface driver ums-onetouch
<6>usbcore: registered new interface driver ums-realtek
[    3.135708] usbcore: registered new interface driver ums-realtek
<6>usbcore: registered new interface driver ums-sddr09
[    3.146628] usbcore: registered new interface driver ums-sddr09
<6>usbcore: registered new interface driver ums-sddr55
[    3.157469] usbcore: registered new interface driver ums-sddr55
<6>usbcore: registered new interface driver ums-usbat
[    3.168217] usbcore: registered new interface driver ums-usbat
<6>usbcore: registered new interface driver usbserial
[    3.178972] usbcore: registered new interface driver usbserial
<6>usbcore: registered new interface driver usbserial_generic
[    3.190344] usbcore: registered new interface driver usbserial_generic
<6>USB Serial support registered for generic
[    3.200928] USB Serial support registered for generic
<6>usbserial: USB Serial Driver core
[    3.209312] usbserial: USB Serial Driver core
<6>mousedev: PS/2 mouse device common for all mice
[    3.218383] mousedev: PS/2 mouse device common for all mice
<3>sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
[    3.229897] sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
<3>sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
[    3.241328] sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
<6>sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
[    3.252742] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
<6>i2c /dev entries driver
[    3.261363] i2c /dev entries driver
config i2c gpio with gpio_config api
[    3.268634] config i2c gpio with gpio_config api
<6>axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
[    3.278919] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<6>I2C: i2c-0: AW16XX I2C adapter
[    3.288030] I2C: i2c-0: AW16XX I2C adapter
<6>I2C: i2c-1: AW16XX I2C adapter
[    3.295539] I2C: i2c-1: AW16XX I2C adapter
<6>I2C: i2c-2: AW16XX I2C adapter
[    3.302998] I2C: i2c-2: AW16XX I2C adapter
<6>lirc_dev: IR Remote Control driver registered, major 250
[    3.312658] lirc_dev: IR Remote Control driver registered, major 250
<6>IR NEC protocol handler initialized
[    3.322603] IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
[    3.330885] IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
[    3.339166] IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
[    3.347176] IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
[    3.355281] IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
[    3.364426] IR RC5 (streamzap) protocol handler initialized
<6>IR SANYO protocol handler initialized
[    3.373661] IR SANYO protocol handler initialized
<6>IR MCE Keyboard/mouse protocol handler initialized
[    3.383155] IR MCE Keyboard/mouse protocol handler initialized
<6>IR LIRC bridge handler initialized
[    3.392390] IR LIRC bridge handler initialized
[tt]----- avs_dev driver load... ----
[    3.400298] [tt]----- avs_dev driver load... ----
[tt]-----      register iomem      ----
[    3.408589] [tt]-----      register iomem      ----
[tt]--- avs_dev driver load ok!! -----
[    3.417107] [tt]--- avs_dev driver load ok!! -----
[ace_drv] start!!!
[    3.423659] [ace_drv] start!!!
[ace_drv] init end!!!
[    3.429064] [ace_drv] init end!!!
[pa_drv] start!!!
[    3.434042] [pa_drv] start!!!
[pa_drv] init end!!!
[    3.439226] [pa_drv] init end!!!
<6>axp20_ldo1: 1300 mV
[    3.444772] axp20_ldo1: 1300 mV
<6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
[    3.453206] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>axp20_ldo3: 700 <--> 3500 mV at 2800 mV
[    3.463321] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
<6>axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
[    3.473636] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
<6>axp20_buck2: 700 <--> 2275 mV at 1400 mV
[    3.483832] axp20_buck2: 700 <--> 2275 mV at 1400 mV
<6>axp20_buck3: 700 <--> 3500 mV at 1250 mV
[    3.494028] axp20_buck3: 700 <--> 3500 mV at 1250 mV
<6>axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
[    3.503932] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
[    3.518722] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0
<4>axp20_ldo2: Failed to create debugfs directory
[    3.546765] axp20_ldo2: Failed to create debugfs directory
<6>md: linear personality registered for level -1
[    3.557513] md: linear personality registered for level -1
<6>md: raid0 personality registered for level 0
[    3.567302] md: raid0 personality registered for level 0
<6>md: raid1 personality registered for level 1
[    3.576880] md: raid1 personality registered for level 1
<6>md: raid10 personality registered for level 10
[    3.586638] md: raid10 personality registered for level 10
<6>md: raid6 personality registered for level 6
[    3.596394] md: raid6 personality registered for level 6
<6>md: raid5 personality registered for level 5
[    3.605983] md: raid5 personality registered for level 5
<6>md: raid4 personality registered for level 4
[    3.615567] md: raid4 personality registered for level 4
<6>md: multipath personality registered for level -4
[    3.625581] md: multipath personality registered for level -4
<6>md: faulty personality registered for level -5
[    3.635771] md: faulty personality registered for level -5
<6>device-mapper: uevent: version 1.0.3
[    3.645350] device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.657749] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>device-mapper: multipath: version 1.3.0 loaded
[    3.671370] device-mapper: multipath: version 1.3.0 loaded
<6>device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.682375] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>device-mapper: multipath queue-length: version 0.1.0 loaded
[    3.694477] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>device-mapper: multipath service-time: version 0.2.0 loaded
[    3.706662] device-mapper: multipath service-time: version 0.2.0 loaded
<6>device-mapper: dm-log-userspace: version 1.1.0 loaded
[    3.718579] device-mapper: dm-log-userspace: version 1.1.0 loaded
<6>cpuidle: using governor ladder
[    3.727865] cpuidle: using governor ladder
<6>cpuidle: using governor menu
[    3.734863] cpuidle: using governor menu
<6>usbcore: registered new interface driver ushc
[    3.743292] usbcore: registered new interface driver ushc
<6>[mmc-msg] sw_mci_init
[    3.750979] [mmc-msg] sw_mci_init
<6>[mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
[    3.760047] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
<6>[mmc-msg] sdc0 set round clock 400000, src 24000000
[    3.772010] [mmc-msg] sdc0 set round clock 400000, src 24000000
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.786208] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 Probe: base:0xf00e2000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
[    3.803454] [mmc-msg] sdc0 Probe: base:0xf00e2000 irq:64 sg_cpu:ffdf7000(4fc00000) ret 0.
<6>[mmc-msg] sdc3 set round clock 400000, src 24000000
[    3.816740] [mmc-msg] sdc3 set round clock 400000, src 24000000
<6>[mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.830862] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc3 Probe: base:0xf00e4000 irq:67 sg_cpu:ffddf000(4fc01000) ret 0.
[    3.848076] [mmc-msg] sdc3 Probe: base:0xf00e4000 irq:67 sg_cpu:ffddf000(4fc01000) ret 0.
[mmc_pm]: no sdio card used in configuration
[    3.860311] [mmc_pm]: no sdio card used in configuration
<6>sunxi_leds driver init
[    3.867995] sunxi_leds driver init
<7>Registered led device: green:ph20:led1
<7>Registered led device: blue:ph21:led2
<6>ledtrig-cpu: registered to indicate activity on CPUs
[    3.884234] ledtrig-cpu: registered to indicate activity on CPUs
<6>usbcore: registered new interface driver usbhid
[    3.895654] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[    3.904042] usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
[    3.911857] logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
[    3.920198] logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
[    3.928589] logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
[    3.936959] logger: created 256K log 'log_system'
<6>IPv4 over IPv4 tunneling driver
[    3.947086] IPv4 over IPv4 tunneling driver
<6>TCP: bic registered
[    3.954101] TCP: bic registered
<6>TCP: cubic registered
[    3.959545] TCP: cubic registered
<6>TCP: westwood registered
[    3.965387] TCP: westwood registered
<6>TCP: highspeed registered
[    3.971591] TCP: highspeed registered
<6>TCP: hybla registered
[    3.977542] TCP: hybla registered
<6>TCP: htcp registered
[    3.983036] TCP: htcp registered
<6>TCP: vegas registered
[    3.988540] TCP: vegas registered
<6>TCP: veno registered
[    3.994034] TCP: veno registered
<6>TCP: scalable registered
[    3.999805] TCP: scalable registered
<6>TCP: lp registered
[    4.005386] TCP: lp registered
<6>TCP: yeah registered
[    4.010632] TCP: yeah registered
<6>TCP: illinois registered
[    4.016385] TCP: illinois registered
<6>Initializing XFRM netlink socket
[    4.023188] Initializing XFRM netlink socket
<6>NET: Registered protocol family 10
[    4.031536] NET: Registered protocol family 10
<6>NET: Registered protocol family 17
[    4.040524] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[    4.048455] NET: Registered protocol family 15
<5>Registering the dns_resolver key type
[    4.056601] Registering the dns_resolver key type
<6>VFP support v0.3: [    4.063523] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
implementor 41 architecture 2 part 30 variant 7 rev 4
<5>Registering SWP/SWPB emulation handler
[    4.079779] Registering SWP/SWPB emulation handler
<4>axp20_buck2: Failed to create debugfs directory
[    4.089183] axp20_buck2: Failed to create debugfs directory
<6>[cpu_freq] INF:-------------------V-F Table-------------------
[    4.100925] [cpu_freq] INF:-------------------V-F Table-------------------
<6>[cpu_freq] INF:      voltage = 1450mv        frequency = 1008MHz
[    4.112863] [cpu_freq] INF:  voltage = 1450mv        frequency = 1008MHz
<6>[cpu_freq] INF:      voltage = 1400mv        frequency =  912MHz
[    4.124008] [cpu_freq] INF:  voltage = 1400mv        frequency =  912MHz
<6>[cpu_freq] INF:      voltage = 1300mv        frequency =  864MHz
[    4.135152] [cpu_freq] INF:  voltage = 1300mv        frequency =  864MHz
<6>[cpu_freq] INF:      voltage = 1200mv        frequency =  720MHz
[    4.146293] [cpu_freq] INF:  voltage = 1200mv        frequency =  720MHz
<6>[cpu_freq] INF:      voltage = 1100mv        frequency =  528MHz
[    4.157436] [cpu_freq] INF:  voltage = 1100mv        frequency =  528MHz
<6>[cpu_freq] INF:      voltage = 1050mv        frequency =  312MHz
[    4.168579] [cpu_freq] INF:  voltage = 1050mv        frequency =  312MHz
<6>[cpu_freq] INF:      voltage = 1050mv        frequency =  144MHz
[    4.179722] [cpu_freq] INF:  voltage = 1050mv        frequency =  144MHz
<6>[cpu_freq] INF:      voltage = 1000mv        frequency =    0MHz
[    4.190867] [cpu_freq] INF:  voltage = 1000mv        frequency =    0MHz
<6>[cpu_freq] INF:-----------------------------------------------
[    4.202795] [cpu_freq] INF:-----------------------------------------------
<6>[cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 384MHz
[    4.219413] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 384MHz
<6>registered taskstats version 1
[    4.233997] registered taskstats version 1
<4>[DISP] Unsupported mode: 1280x800p60, ignoring
[    4.243653] [DISP] Unsupported mode: 1280x800p60, ignoring
<6>I2C: i2c-3: HDMI I2C adapter
[    4.252623] I2C: i2c-3: HDMI I2C adapter
<6>[mmc-msg] mmc 0 detect change, present 1
[    4.783910] [mmc-msg] mmc 0 detect change, present 1
<6>[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.292959] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 power on
[    5.304420] [mmc-msg] sdc0 power on
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.333374] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set round clock 400000, src 24000000
[    5.347722] [mmc-msg] sdc0 set round clock 400000, src 24000000
<3>[mmc-err] smc 0 err, cmd 52,  RTO
[    5.430674] [mmc-err] smc 0 err, cmd 52,  RTO
<3>[mmc-err] smc 0 err, cmd 52,  RTO
[    5.439210] [mmc-err] smc 0 err, cmd 52,  RTO
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.451937] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.473322] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<3>[mmc-err] smc 0 err, cmd 5,  RTO
[    5.488738] [mmc-err] smc 0 err, cmd 5,  RTO
<3>[mmc-err] smc 0 err, cmd 5,  RTO
[    5.497072] [mmc-err] smc 0 err, cmd 5,  RTO
<3>[mmc-err] smc 0 err, cmd 5,  RTO
[    5.505430] [mmc-err] smc 0 err, cmd 5,  RTO
<3>[mmc-err] smc 0 err, cmd 5,  RTO
[    5.513780] [mmc-err] smc 0 err, cmd 5,  RTO
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.527074] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.544878] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    5.566291] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    5.773804] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[    5.791614] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<6>[mmc-msg] sdc0 set round clock 42857143, src 600000000
[    5.806306] [mmc-msg] sdc0 set round clock 42857143, src 600000000
<6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[    5.873510] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<6>mmc0: new high speed SDHC card at address 751b
[    5.887495] mmc0: new high speed SDHC card at address 751b
<6>mmcblk0: mmc0:751b SD08G 7.42 GiB
<6>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.897050] mmcblk0: mmc0:751b SD08G 7.42 GiB
[    5.902193] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6> mmcblk0: p1
[    5.916209]  mmcblk0: p1
<6>ata1.00: ATA-8: WDC WD7500BPVT-75HXZT3, 03.01A03, max UDMA/133
[    6.193132] ata1.00: ATA-8: WDC WD7500BPVT-75HXZT3, 03.01A03, max UDMA/133
<6>ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    6.205798] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32)
<6>ata1.00: configured for UDMA/133
[    6.219534] ata1.00: configured for UDMA/133
<5>scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-7 03.0 PQ: 0 ANSI: 5
[    6.242654] scsi 0:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-7 03.0 PQ: 0 ANSI: 5
<5>sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    6.258102] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
<5>sd 0:0:0:0: [sda] 4096-byte physical blocks
[    6.270394] sd 0:0:0:0: [sda] 4096-byte physical blocks
<5>sd 0:0:0:0: [sda] Write Protect is off
[    6.279811] sd 0:0:0:0: [sda] Write Protect is off
<7>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.304808] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 sda3
[    6.335031]  sda: sda1 sda2 sda3
<5>sd 0:0:0:0: [sda] Attached SCSI disk
[    6.343826] sd 0:0:0:0: [sda] Attached SCSI disk
<4>Timeout waiting for EDID info
[   14.288007] Timeout waiting for EDID info
<6>disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
[   14.298428] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
<6>Console: switching to colour frame buffer device 160x45
[   15.090346] Console: switching to colour frame buffer device 160x45
<4>axp20_buck3: incomplete constraints, leaving on
[   15.135941] axp20_buck3: incomplete constraints, leaving on
<4>axp20_buck2: incomplete constraints, leaving on
[   15.146892] axp20_buck2: incomplete constraints, leaving on
<4>axp20_ldo4: incomplete constraints, leaving on
[   15.157741] axp20_ldo4: incomplete constraints, leaving on
<4>axp20_ldo3: incomplete constraints, leaving on
[   15.168486] axp20_ldo3: incomplete constraints, leaving on
<4>axp20_ldo2: incomplete constraints, leaving on
[   15.189036] axp20_ldo2: incomplete constraints, leaving on
<4>axp20_ldo1: incomplete constraints, leaving on
[   15.209233] axp20_ldo1: incomplete constraints, leaving on
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
[   15.232069] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
<6>ALSA device list:
[   15.265034] ALSA device list:
<6>  #0: sunxi-CODEC  Audio Codec
[   15.280528]   #0: sunxi-CODEC  Audio Codec
<6>md: Waiting for all devices to be available before autodetect
[   15.300297] md: Waiting for all devices to be available before autodetect
<6>md: If you don't use raid, use raid=noautodetect
[   15.321234] md: If you don't use raid, use raid=noautodetect
<6>md: Autodetecting RAID arrays.
[   15.340784] md: Autodetecting RAID arrays.
<6>md: Scanned 0 and added 0 devices.
[   15.357574] md: Scanned 0 and added 0 devices.
<6>md: autorun ...
[   15.372899] md: autorun ...
<6>md: ... autorun DONE.
[   15.386912] md: ... autorun DONE.
<3>EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[   15.415331] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
<3>EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
[   15.455330] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240)
<6>EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   15.762636] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
<6>VFS: Mounted root (ext4 filesystem) on device 179:1.
[   15.784894] VFS: Mounted root (ext4 filesystem) on device 179:1.
<6>devtmpfs: mounted
[   15.812364] devtmpfs: mounted
<6>Freeing init memory: 240K
[   15.827551] Freeing init memory: 240K
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd<30>udevd[172]: starting version 175
[   17.090057] udevd[172]: starting version 175
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting preliminary keymap...done.
Setting parameters of disc: (none).
Activating swap...<6>Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k
[   20.008895] Adding 2097148k swap on /dev/sda2.  Priority:-1 extents:1 across:2097148k
done.
<6>EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[   20.072208] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
Checking root file system...fsck from util-linux 2.20.1
cubieboard: clean, 42972/246720 files, 316918/972800 blocks
done.
<6>EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[   20.259855] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
Loading kernel module gpio_sunxi.
<6>sunxi_gpio driver init ver 1.3
[   20.511321] sunxi_gpio driver init ver 1.3
<6>gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
[   20.544086] gpiochip_add: registered GPIOs 1 to 67 on device: A1X_GPIO
Loading kernel module sw_ahci_platform.
Loading kernel module lcd.
Loading kernel module hdmi.
Loading kernel module ump.
UMP<2>: [   20.639616] UMP<2>: Inserting UMP device driver. Compiled: Nov  3 2013, time: 01:03:57
Inserting UMP device driver. Compiled: Nov  3 2013, time: 01:03:57
UMP<2>: [   20.663877] UMP<2>: Using OS memory backend, allocation limit: 134217728
Using OS memory backend, allocation limit: 134217728
UMP: [   20.685088] UMP: UMP device driver  loaded
UMP device driver  loaded
Loading kernel module disp.
Loading kernel module mali.
Mali: [   20.754058] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x44000000, size=33554432)
permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x44000000, size=33554432)
<6>mali: use config clk_div 3
[   20.784505] mali: use config clk_div 3
<6>mali: clk_div 3
[   20.800799] mali: clk_div 3
Mali: [   20.813659] Mali: mali clock set completed, clock is  320000000 Hz
mali clock set completed, clock is  320000000 Hz
<6>mali: use config clk_div 3
[   20.836573] mali: use config clk_div 3
<6>mali: clk_div 3
[   20.851178] mali: clk_div 3
Mali: [   20.863410] Mali: mali clock set completed, clock is  320000000 Hz
mali clock set completed, clock is  320000000 Hz
Mali: [   20.887911] Mali: Mali device driver loaded
Mali device driver loaded
Setting up LVM Volume Groups...  ffff0000-ffff1000 r-xp 00000000 00:00 0          [vectors]: mlock failed: Cannot allocate memory
  ffff0000-ffff1000 r-xp 00000000 00:00 0          [vectors]: munlock failed: Cannot allocate memory
done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux 2.20.1
HOME: recovering journal
HOME: clean, 85/131072 files, 25475/524288 blocks
USR: clean, 31896/131072 files, 138321/524288 blocks
VAR: clean, 3928/196608 files, 136864/786432 blocks
TMP: recovering journal
TMP: clean, 17/196608 files, 30467/786432 blocks
SRV: recovering journal
SRV: clean, 16/1310720 files, 126294/5242880 blocks
ARCHIVES: recovering journal
ARCHIVES: clean, 34489/19660800 files, 35255534/78643200 blocks
done.
Mounting local filesystems...<6>EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[   27.366751] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   27.440092] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   27.522562] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[   27.586514] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   27.714547] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
[   27.939833] EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
done.
Activating swapfile swap...done.
/etc/init.d/cubian-fixrandomemac set mac address c0:b0:4c:18:47:95 on eth0
Setting kernel variables ...done.
Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or directory
<6>sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   29.753431] sunxi_emac sunxi_emac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Listening on LPF/eth0/c0:b0:4c:18:47:95
Sending on   LPF/eth0/c0:b0:4c:18:47:95
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.0.254
DHCPACK from 192.168.0.254
can't create /var/lib/dhcp/dhclient.eth0.leases: No such file or directory
bound to 192.168.0.44 -- renewal in 20091 seconds.
done.
/etc/init.d/console-screen.sh: 1: /etc/init.d/console-screen.sh: cut: not found
/etc/init.d/console-screen.sh: 43: [: =: unexpected operator
/etc/init.d/console-screen.sh: 61: /etc/init.d/console-screen.sh: locale: not found
Setting console screen modes and fonts.
/etc/init.d/console-screen.sh: 212: /etc/init.d/console-screen.sh: setterm: not found
/etc/init.d/console-screen.sh: 240: /etc/init.d/console-screen.sh: dumpkeys: not found
Setting up console font and keymap...It seems /usr is not mounted. Will not save files in /etc.
Neither setfont nor consolechars is accessible. No font will be configured.
done.
Setting up X socket directories... /tmp/.X11-unix/etc/init.d/x11-common: 56: /etc/init.d/x11-common: stat: not found
failed to set up /tmp/.X11-unix ... failed!
startpar: service(s) returned failure: x11-common ... failed!
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
/etc/init.d/fail2ban: 1: /etc/init.d/fail2ban: tail: not found
SSL tunnels disabled, see /etc/default/stunnel4
Loading cpufreq kernel modules.../etc/init.d/loadcpufreq: 155: /etc/init.d/loadcpufreq: awk: not found
/etc/init.d/bootlogs: 22: /etc/init.d/bootlogs: savelog: not found
Setting sysfs variables....
/etc/init.d/cubian-gpiopermission: 23: /etc/init.d/cubian-gpiopermission: xargs: not found
/etc/init.d/cubian-gpiopermission: 23: /etc/init.d/cubian-gpiopermission: find: not found

Debian GNU/Linux 7 XXX ttyS0

XXX login: root
Password:
Last login: Wed Jan  1 18:44:47 CET 2014 on ttyS0
Linux Venabulis 3.4.67+ #4 SMP PREEMPT Wed Nov 6 08:31:09 CST 2013 armv7l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
/root/.zprofile:.:9: no such file or directory: /usr/bin/byobu-launch
/etc/zsh/zshrc:60: failed to load module `zsh/zle': /usr/lib/zsh/4.3.17/zsh/zle.so: cannot open shared object file: No such file or directory
/etc/zsh/zshrc:61: command not found: bindkey
/etc/zsh/zshrc:62: command not found: bindkey
/etc/zsh/zshrc:63: command not found: bindkey
/etc/zsh/zshrc:64: command not found: bindkey
/etc/zsh/zshrc:65: command not found: bindkey
/etc/zsh/zshrc:66: command not found: bindkey
/etc/zsh/zshrc:70: command not found: id
/etc/zsh/zshrc:257: failed to load module `zsh/zle': /usr/lib/zsh/4.3.17/zsh/zle.so: cannot open shared object file: No such file or directory
/etc/zsh/zshrc:258: command not found: zstyle
/etc/zsh/zshrc:259: command not found: zstyle
/etc/zsh/zshrc:262: compinit: function definition file not found
/root/.zshrc:60: command not found: bindkey
/root/.zshrc:61: command not found: bindkey
/root/.zshrc:62: command not found: bindkey
/root/.zshrc:63: command not found: bindkey
/root/.zshrc:64: command not found: bindkey
/root/.zshrc:65: command not found: bindkey
/root/.zshrc:66: command not found: bindkey
/root/.zshrc:70: command not found: id
/root/.zshrc:257: command not found: zstyle
/root/.zshrc:258: command not found: zstyle
/root/.zshrc:259: command not found: zstyle
/root/.zshrc:262: compinit: function definition file not found
Linux XXX 3.4.67+ #4 SMP PREEMPT Wed Nov 6 08:31:09 CST 2013 armv7l GNU/Linux
/root/.zlogin:11: command not found: uptime
/root/.zlogin:14: command not found: mesg
zsh: failed to load module `zsh/zle': /usr/lib/zsh/4.3.17/zsh/zle.so: cannot open shared object file: No such file or directory
1:01 root@XXX ~# mount
/dev/root on / type ext4 (rw,relatime,data=ordered)
devtmpfs on /dev type devtmpfs (rw,relatime,size=496000k,nr_inodes=124000,mode=755)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=99224k,mode=755)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /run/shm type tmpfs (rw,nosuid,nodev,noexec,relatime,size=617860k)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
/dev/mapper/vg_venabulis-lv_home on /home type ext4 (rw,relatime,data=ordered)
/dev/mapper/vg_venabulis-lv_usr on /usr type ext4 (rw,relatime,data=ordered)
/dev/mapper/vg_venabulis-lv_var on /var type ext4 (rw,relatime,data=ordered)
/dev/mapper/vg_venabulis-lv_tmp on /tmp type ext4 (rw,relatime,data=ordered)
/dev/mapper/vg_venabulis-lv_srv on /srv type ext4 (rw,relatime,data=ordered)
/dev/mapper/vg_venabulis-lv_archives on /archives type ext4 (rw,relatime,data=ordered)

Finaly none service is up, lot of thing are broken, autocompletion is broken and many other problems. The problem is the LVM system is loading at the end of boot, but the root, var and usr partition are needed before. Ask me if you want more informations.

Mimoza commented 10 years ago

Well finally i found my mistake .... when i copy a system folder i make an error :

cp -a /usr /mnt/usr

But it's WRONG, because like that i create a "usr" directory in the new partition ... so the correct command is :

cp -a /usr/* /mnt/usr

Sorry for this stupid error, and i hope it will be usefull for someone... You can close this issue